[PATCH] arm64: dts: meson-g12a-x96-max: Add Gigabit Ethernet Support

[PATCH] arm64: dts: meson-g12a-x96-max: Add Gigabit Ethernet Support

[Neil Armstrong]

Enable the network interface of the X96 Mac using an external
Realtek RTL8211F gigabit PHY, needing the same broken-eee properties
as the previous Amlogic SoC generations.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../boot/dts/amlogic/meson-g12a-x96-max.dts   | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index 5cdc263b03e6..5ca79109c250 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -15,6 +15,7 @@
 
 	aliases {
 		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
 	};
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -150,6 +151,27 @@
 	pinctrl-names = "default";
 };
 
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+		eee-broken-1000t;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_rmii_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+};
+
 &uart_A {
 	status = "okay";
 	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH] arm64: dts: meson-g12a-x96-max: Add Gigabit Ethernet Support

[Martin Blumenstingl]

Hi Neil,

On Mon, May 20, 2019 at 3:43 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> Enable the network interface of the X96 Mac using an external
> Realtek RTL8211F gigabit PHY, needing the same broken-eee properties
> as the previous Amlogic SoC generations.
>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  .../boot/dts/amlogic/meson-g12a-x96-max.dts   | 22 +++++++++++++++++++
>  1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> index 5cdc263b03e6..5ca79109c250 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> @@ -15,6 +15,7 @@
>
>         aliases {
>                 serial0 = &uart_AO;
> +               ethernet0 = &ethmac;
>         };
>         chosen {
>                 stdout-path = "serial0:115200n8";
> @@ -150,6 +151,27 @@
>         pinctrl-names = "default";
>  };
>
> +&ext_mdio {
> +       external_phy: ethernet-phy@0 {
> +               /* Realtek RTL8211F (0x001cc916) */
> +               reg = <0>;
> +               max-speed = <1000>;
> +               eee-broken-1000t;
do we still need eee-broken-1000t? there are only 2 boards left which
set it and I'm not sure whether those still need it after Carlo's
fixes

> +       };
> +};
> +
> +&ethmac {
> +       pinctrl-0 = <&eth_rmii_pins>, <&eth_rgmii_pins>;
Jerome renamed "eth_rmii_pins" to "eth_pins" in v2 of his Ethernet
pinctrl patch: [0]
you missed his update only by a few minutes


Martin


[0] https://patchwork.kernel.org/patch/10951103/

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH] arm64: dts: meson-g12a-x96-max: Add Gigabit Ethernet Support

[Neil Armstrong]

Hi,

On 20/05/2019 19:49, Martin Blumenstingl wrote:
> Hi Neil,
> 
> On Mon, May 20, 2019 at 3:43 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> Enable the network interface of the X96 Mac using an external
>> Realtek RTL8211F gigabit PHY, needing the same broken-eee properties
>> as the previous Amlogic SoC generations.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>>  .../boot/dts/amlogic/meson-g12a-x96-max.dts   | 22 +++++++++++++++++++
>>  1 file changed, 22 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
>> index 5cdc263b03e6..5ca79109c250 100644
>> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
>> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
>> @@ -15,6 +15,7 @@
>>
>>         aliases {
>>                 serial0 = &uart_AO;
>> +               ethernet0 = &ethmac;
>>         };
>>         chosen {
>>                 stdout-path = "serial0:115200n8";
>> @@ -150,6 +151,27 @@
>>         pinctrl-names = "default";
>>  };
>>
>> +&ext_mdio {
>> +       external_phy: ethernet-phy@0 {
>> +               /* Realtek RTL8211F (0x001cc916) */
>> +               reg = <0>;
>> +               max-speed = <1000>;
>> +               eee-broken-1000t;
> do we still need eee-broken-1000t? there are only 2 boards left which
> set it and I'm not sure whether those still need it after Carlo's
> fixes

In our tests, this boards really needs it... otherwise the network stalls
pretty quickly. I'd prefer to avoid it but seems it's necessary.

> 
>> +       };
>> +};
>> +
>> +&ethmac {
>> +       pinctrl-0 = <&eth_rmii_pins>, <&eth_rgmii_pins>;
> Jerome renamed "eth_rmii_pins" to "eth_pins" in v2 of his Ethernet
> pinctrl patch: [0]
> you missed his update only by a few minutes


Damn...
Thx.

Neil

> 
> 
> Martin
> 
> 
> [0] https://patchwork.kernel.org/patch/10951103/
> 


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic