linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Jonas Karlman <jonas@kwiboo.se>
To: Jerome Brunet <jbrunet@baylibre.com>,
	Andrzej Hajda <a.hajda@samsung.com>,
	 Neil Armstrong <narmstrong@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"dri-devel@lists.freedesktop.org"
	<dri-devel@lists.freedesktop.org>,
	"linux-amlogic@lists.infradead.org"
	<linux-amlogic@lists.infradead.org>
Subject: Re: [RESEND PATCH v2 8/8] drm/bridge: dw-hdmi-i2s: add .get_eld support
Date: Wed, 14 Aug 2019 10:08:00 +0000	[thread overview]
Message-ID: <HE1PR06MB401112DA555C49332C968D50ACAD0@HE1PR06MB4011.eurprd06.prod.outlook.com> (raw)
In-Reply-To: <20190812125016.20169-1-jbrunet@baylibre.com>

On 2019-08-12 14:50, Jerome Brunet wrote:
> Provide the eld to the generic hdmi-codec driver.
> This will let the driver enforce the maximum channel number and set the
> channel allocation depending on the hdmi sink.
>
> Cc: Jonas Karlman <jonas@kwiboo.se>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>

Tested on Rockchip RK3288/RK3328 devices, full ELD is now available to userspace.
Please note that the r-b line in patch 2 is mixed in middle of commit message.

Reviewed-by: Jonas Karlman <jonas@kwiboo.se>

Regards,
Jonas

> ---
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h     |  1 +
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 11 +++++++++++
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c           |  1 +
>  3 files changed, 13 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
> index 63b5756f463b..cb07dc0da5a7 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h
> @@ -14,6 +14,7 @@ struct dw_hdmi_audio_data {
>  
>  struct dw_hdmi_i2s_audio_data {
>  	struct dw_hdmi *hdmi;
> +	u8 *eld;
>  
>  	void (*write)(struct dw_hdmi *hdmi, u8 val, int offset);
>  	u8 (*read)(struct dw_hdmi *hdmi, int offset);
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> index b8ece9c1ba2c..1d15cf9b6821 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c
> @@ -10,6 +10,7 @@
>  #include <linux/module.h>
>  
>  #include <drm/bridge/dw_hdmi.h>
> +#include <drm/drm_crtc.h>
>  
>  #include <sound/hdmi-codec.h>
>  
> @@ -121,6 +122,15 @@ static void dw_hdmi_i2s_audio_shutdown(struct device *dev, void *data)
>  	dw_hdmi_audio_disable(hdmi);
>  }
>  
> +static int dw_hdmi_i2s_get_eld(struct device *dev, void *data, uint8_t *buf,
> +			       size_t len)
> +{
> +	struct dw_hdmi_i2s_audio_data *audio = data;
> +
> +	memcpy(buf, audio->eld, min_t(size_t, MAX_ELD_BYTES, len));
> +	return 0;
> +}
> +
>  static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
>  				  struct device_node *endpoint)
>  {
> @@ -144,6 +154,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component,
>  static struct hdmi_codec_ops dw_hdmi_i2s_ops = {
>  	.hw_params	= dw_hdmi_i2s_hw_params,
>  	.audio_shutdown	= dw_hdmi_i2s_audio_shutdown,
> +	.get_eld	= dw_hdmi_i2s_get_eld,
>  	.get_dai_id	= dw_hdmi_i2s_get_dai_id,
>  };
>  
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index bed4bb017afd..8df69c9dbfad 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -2797,6 +2797,7 @@ __dw_hdmi_probe(struct platform_device *pdev,
>  		struct dw_hdmi_i2s_audio_data audio;
>  
>  		audio.hdmi	= hdmi;
> +		audio.eld	= hdmi->connector.eld;
>  		audio.write	= hdmi_writeb;
>  		audio.read	= hdmi_readb;
>  		hdmi->enable_audio = dw_hdmi_i2s_audio_enable;


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2019-08-14 10:09 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-12 12:07 [PATCH v2 0/8] drm/bridge: dw-hdmi: improve i2s support Jerome Brunet
2019-08-12 12:07 ` [PATCH v2 1/8] drm/bridge: dw-hdmi-i2s: support more i2s format Jerome Brunet
2019-08-12 12:07 ` [PATCH v2 2/8] drm/bridge: dw-hdmi: move audio channel setup out of ahb Jerome Brunet
2019-08-12 12:07 ` [PATCH v2 3/8] drm/bridge: dw-hdmi: set channel count in the infoframes Jerome Brunet
2019-08-12 12:07 ` [PATCH v2 4/8] drm/bridge: dw-hdmi-i2s: enable lpcm multi channels Jerome Brunet
2019-08-12 12:07 ` [PATCH v2 5/8] drm/bridge: dw-hdmi-i2s: set the channel allocation Jerome Brunet
2019-08-12 12:07 ` [PATCH v2 6/8] drm/bridge: dw-hdmi-i2s: reset audio fifo before applying new params Jerome Brunet
2019-08-12 12:07 ` [PATCH v2 7/8] drm/bridge: dw-hdmi-i2s: enable only the required i2s lanes Jerome Brunet
2019-08-12 12:07 ` [PATCH v2 8/8] drm/bridge: dw-hdmi-i2s: add .get_eld support Jerome Brunet
2019-08-12 12:50   ` [RESEND PATCH " Jerome Brunet
2019-08-14 10:08     ` Jonas Karlman [this message]
2019-08-14 13:05       ` Neil Armstrong
2019-08-12 12:19 ` [PATCH v2 0/8] drm/bridge: dw-hdmi: improve i2s support Neil Armstrong
2019-08-12 12:35   ` Jerome Brunet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=HE1PR06MB401112DA555C49332C968D50ACAD0@HE1PR06MB4011.eurprd06.prod.outlook.com \
    --to=jonas@kwiboo.se \
    --cc=a.hajda@samsung.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).