From: Kishon Vijay Abraham I <kishon@ti.com>
To: Remi Pommarel <repk@triplefau.lt>,
Yue Wang <yue.wang@Amlogic.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Andrew Murray <andrew.murray@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Neil Armstrong <narmstrong@baylibre.com>
Cc: linux-pci@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-kernel@vger.kernel.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: Re: [PATCH v2 3/3] PCI: amlogic: Use AXG PCIE and shared MIPI/PCIE PHYs
Date: Tue, 24 Dec 2019 15:44:41 +0530 [thread overview]
Message-ID: <ce9e2f14-cadd-a977-75d7-402a7ee04c7b@ti.com> (raw)
In-Reply-To: <20191223214529.20377-4-repk@triplefau.lt>
Hi,
On 24/12/19 3:15 AM, Remi Pommarel wrote:
> Now that PCIE PHY has been introduced for AXG, the whole has_shared_phy
> logic can be mutualized between AXG and G12A platforms.
>
> This also makes use of the optional MIPI/PCIE shared fonctionality PHY
> found on AXG platforms, which need to be used in order to have reliable
> PCIE communications.
>
> Signed-off-by: Remi Pommarel <repk@triplefau.lt>
> ---
> drivers/pci/controller/dwc/pci-meson.c | 140 ++++++++-----------------
> 1 file changed, 46 insertions(+), 94 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
> index 3772b02a5c55..3d12155c32f6 100644
> --- a/drivers/pci/controller/dwc/pci-meson.c
> +++ b/drivers/pci/controller/dwc/pci-meson.c
> @@ -66,7 +66,6 @@
> #define PORT_CLK_RATE 100000000UL
> #define MAX_PAYLOAD_SIZE 256
> #define MAX_READ_REQ_SIZE 256
> -#define MESON_PCIE_PHY_POWERUP 0x1c
> #define PCIE_RESET_DELAY 500
> #define PCIE_SHARED_RESET 1
> #define PCIE_NORMAL_RESET 0
> @@ -81,26 +80,19 @@ enum pcie_data_rate {
> struct meson_pcie_mem_res {
> void __iomem *elbi_base;
> void __iomem *cfg_base;
> - void __iomem *phy_base;
> };
>
> struct meson_pcie_clk_res {
> struct clk *clk;
> - struct clk *mipi_gate;
> struct clk *port_clk;
> struct clk *general_clk;
> };
>
> struct meson_pcie_rc_reset {
> - struct reset_control *phy;
> struct reset_control *port;
> struct reset_control *apb;
> };
>
> -struct meson_pcie_param {
> - bool has_shared_phy;
> -};
> -
> struct meson_pcie {
> struct dw_pcie pci;
> struct meson_pcie_mem_res mem_res;
> @@ -108,7 +100,7 @@ struct meson_pcie {
> struct meson_pcie_rc_reset mrst;
> struct gpio_desc *reset_gpio;
> struct phy *phy;
> - const struct meson_pcie_param *param;
> + struct phy *shared_phy;
> };
>
> static struct reset_control *meson_pcie_get_reset(struct meson_pcie *mp,
> @@ -130,13 +122,6 @@ static int meson_pcie_get_resets(struct meson_pcie *mp)
> {
> struct meson_pcie_rc_reset *mrst = &mp->mrst;
>
> - if (!mp->param->has_shared_phy) {
> - mrst->phy = meson_pcie_get_reset(mp, "phy", PCIE_SHARED_RESET);
> - if (IS_ERR(mrst->phy))
> - return PTR_ERR(mrst->phy);
> - reset_control_deassert(mrst->phy);
> - }
> -
> mrst->port = meson_pcie_get_reset(mp, "port", PCIE_NORMAL_RESET);
> if (IS_ERR(mrst->port))
> return PTR_ERR(mrst->port);
> @@ -162,22 +147,6 @@ static void __iomem *meson_pcie_get_mem(struct platform_device *pdev,
> return devm_ioremap_resource(dev, res);
> }
>
> -static void __iomem *meson_pcie_get_mem_shared(struct platform_device *pdev,
> - struct meson_pcie *mp,
> - const char *id)
> -{
> - struct device *dev = mp->pci.dev;
> - struct resource *res;
> -
> - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, id);
> - if (!res) {
> - dev_err(dev, "No REG resource %s\n", id);
> - return ERR_PTR(-ENXIO);
> - }
> -
> - return devm_ioremap(dev, res->start, resource_size(res));
> -}
> -
> static int meson_pcie_get_mems(struct platform_device *pdev,
> struct meson_pcie *mp)
> {
> @@ -189,14 +158,6 @@ static int meson_pcie_get_mems(struct platform_device *pdev,
> if (IS_ERR(mp->mem_res.cfg_base))
> return PTR_ERR(mp->mem_res.cfg_base);
>
> - /* Meson AXG SoC has two PCI controllers use same phy register */
> - if (!mp->param->has_shared_phy) {
> - mp->mem_res.phy_base =
> - meson_pcie_get_mem_shared(pdev, mp, "phy");
> - if (IS_ERR(mp->mem_res.phy_base))
> - return PTR_ERR(mp->mem_res.phy_base);
> - }
> -
> return 0;
> }
>
> @@ -204,20 +165,40 @@ static int meson_pcie_power_on(struct meson_pcie *mp)
> {
> int ret = 0;
>
> - if (mp->param->has_shared_phy) {
> - ret = phy_init(mp->phy);
> - if (ret)
> - return ret;
> + ret = phy_init(mp->phy);
> + if (ret)
> + goto err;
>
> - ret = phy_power_on(mp->phy);
> - if (ret) {
> - phy_exit(mp->phy);
> - return ret;
> - }
> - } else
> - writel(MESON_PCIE_PHY_POWERUP, mp->mem_res.phy_base);
> + ret = phy_init(mp->shared_phy);
> + if (ret)
> + goto exit;
> +
> + ret = phy_power_on(mp->phy);
> + if (ret)
> + goto shared_exit;
> +
> + ret = phy_power_on(mp->shared_phy);
> + if (ret)
> + goto power_off;
>
> return 0;
> +
> +power_off:
> + phy_power_off(mp->phy);
> +shared_exit:
> + phy_exit(mp->shared_phy);
> +exit:
> + phy_exit(mp->phy);
> +err:
> + return ret;
> +}
> +
> +static void meson_pcie_power_off(struct meson_pcie *mp)
> +{
> + phy_power_off(mp->shared_phy);
> + phy_power_off(mp->phy);
> + phy_exit(mp->shared_phy);
> + phy_exit(mp->phy);
> }
>
> static int meson_pcie_reset(struct meson_pcie *mp)
> @@ -225,16 +206,13 @@ static int meson_pcie_reset(struct meson_pcie *mp)
> struct meson_pcie_rc_reset *mrst = &mp->mrst;
> int ret = 0;
>
> - if (mp->param->has_shared_phy) {
> - ret = phy_reset(mp->phy);
> - if (ret)
> - return ret;
> - } else {
> - reset_control_assert(mrst->phy);
> - udelay(PCIE_RESET_DELAY);
> - reset_control_deassert(mrst->phy);
> - udelay(PCIE_RESET_DELAY);
> - }
> + ret = phy_reset(mp->phy);
> + if (ret)
> + return ret;
> +
> + ret = phy_reset(mp->shared_phy);
> + if (ret)
> + return ret;
>
> reset_control_assert(mrst->port);
> reset_control_assert(mrst->apb);
> @@ -286,12 +264,6 @@ static int meson_pcie_probe_clocks(struct meson_pcie *mp)
> if (IS_ERR(res->port_clk))
> return PTR_ERR(res->port_clk);
>
> - if (!mp->param->has_shared_phy) {
> - res->mipi_gate = meson_pcie_probe_clock(dev, "mipi", 0);
> - if (IS_ERR(res->mipi_gate))
> - return PTR_ERR(res->mipi_gate);
> - }
> -
> res->general_clk = meson_pcie_probe_clock(dev, "general", 0);
> if (IS_ERR(res->general_clk))
> return PTR_ERR(res->general_clk);
> @@ -562,7 +534,6 @@ static const struct dw_pcie_ops dw_pcie_ops = {
>
> static int meson_pcie_probe(struct platform_device *pdev)
> {
> - const struct meson_pcie_param *match_data;
> struct device *dev = &pdev->dev;
> struct dw_pcie *pci;
> struct meson_pcie *mp;
> @@ -576,18 +547,13 @@ static int meson_pcie_probe(struct platform_device *pdev)
> pci->dev = dev;
> pci->ops = &dw_pcie_ops;
>
> - match_data = of_device_get_match_data(dev);
> - if (!match_data) {
> - dev_err(dev, "failed to get match data\n");
> - return -ENODEV;
> - }
> - mp->param = match_data;
> + mp->phy = devm_phy_get(dev, "pcie");
> + if (IS_ERR(mp->phy))
> + return PTR_ERR(mp->phy);
>
> - if (mp->param->has_shared_phy) {
> - mp->phy = devm_phy_get(dev, "pcie");
> - if (IS_ERR(mp->phy))
> - return PTR_ERR(mp->phy);
> - }
> + mp->shared_phy = devm_phy_optional_get(dev, "shared");
> + if (IS_ERR(mp->phy))
> + return PTR_ERR(mp->phy);
This also requires dt-binding updation.Is PCIe connected to two
different PHYs here?
Thanks
Kishon
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-12-24 10:13 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-23 21:45 [PATCH v2 0/3] PCI: amlogic: Make PCIe working reliably on AXG platforms Remi Pommarel
2019-12-23 21:45 ` [PATCH v2 1/3] phy: amlogic: Add Amlogic AXG MIPI/PCIE PHY Driver Remi Pommarel
2019-12-24 10:10 ` Kishon Vijay Abraham I
2019-12-24 16:30 ` Remi Pommarel
2019-12-26 9:25 ` Jerome Brunet
2019-12-26 9:39 ` Jerome Brunet
2019-12-26 20:11 ` Remi Pommarel
2020-01-07 10:08 ` Jerome Brunet
2019-12-23 21:45 ` [PATCH v2 2/3] phy: amlogic: Add Amlogic AXG PCIE " Remi Pommarel
2019-12-24 10:12 ` Kishon Vijay Abraham I
2019-12-23 21:45 ` [PATCH v2 3/3] PCI: amlogic: Use AXG PCIE and shared MIPI/PCIE PHYs Remi Pommarel
2019-12-24 10:14 ` Kishon Vijay Abraham I [this message]
2019-12-24 16:41 ` Remi Pommarel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ce9e2f14-cadd-a977-75d7-402a7ee04c7b@ti.com \
--to=kishon@ti.com \
--cc=andrew.murray@arm.com \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=narmstrong@baylibre.com \
--cc=repk@triplefau.lt \
--cc=yue.wang@Amlogic.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).