From: Neil Armstrong <neil.armstrong@linaro.org>
To: u-boot-amlogic@groups.io, christianshewitt@gmail.com,
u-boot@lists.denx.de, linux-amlogic@lists.infradead.org
Subject: Re: [PATCH v2 08/14] docs: boards: amlogic: add documentation for BananaPi M2S
Date: Thu, 23 Mar 2023 16:01:31 +0100 [thread overview]
Message-ID: <f8555a7c-8dfb-d803-e422-2534a4df2c8e@linaro.org> (raw)
In-Reply-To: <20230323143142.780306-9-christianshewitt@gmail.com>
On 23/03/2023 15:31, Christian Hewitt wrote:
> Add build docs for the BPI-M2S board.
>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> board/amlogic/w400/MAINTAINERS | 2 +
> doc/board/amlogic/bananapi-m2s.rst | 153 +++++++++++++++++++++++++++++
> doc/board/amlogic/index.rst | 1 +
> 3 files changed, 156 insertions(+)
> create mode 100644 doc/board/amlogic/bananapi-m2s.rst
>
> diff --git a/board/amlogic/w400/MAINTAINERS b/board/amlogic/w400/MAINTAINERS
> index 26a4c2c587..042b523056 100644
> --- a/board/amlogic/w400/MAINTAINERS
> +++ b/board/amlogic/w400/MAINTAINERS
> @@ -4,5 +4,7 @@ S: Maintained
> L: u-boot-amlogic@groups.io
> F: board/amlogic/w400/
> F: configs/bananapi-cm4-cm4io_defconfig
> +F: configs/bananapi-m2s_defconfig
> F: doc/board/amlogic/w400.rst
> F: doc/board/amlogic/bananapi-cm4io.rst
> +F: doc/board/amlogic/bananapi-m2s.rst
> diff --git a/doc/board/amlogic/bananapi-m2s.rst b/doc/board/amlogic/bananapi-m2s.rst
> new file mode 100644
> index 0000000000..4a1be47b35
> --- /dev/null
> +++ b/doc/board/amlogic/bananapi-m2s.rst
> @@ -0,0 +1,153 @@
> +.. SPDX-License-Identifier: GPL-2.0+
> +
> +U-Boot for BananaPi M2S (A311D & S922X)
> +=======================================
> +
> +BananaPi BPI-M2S ships is a Single Board Computer manufactured by Sinovoip that ships in
> +two variants with Amlogic S922X or A311D SoC and the following common specification:
> +
> +- 16GB eMMC
> +- HDMI 2.1a video
> +- 2x 10/100/1000 Base-T Ethernet (1x RTL8211F, 1x RTL811H)
> +- 2x USB 2.0 ports
> +- 2x Status LED's (green/blue)
> +- 1x Power/Reset button
> +- 1x micro SD card slot
> +- 40-pin GPIO header
> +- PWM fan header
> +- UART header
> +
> +The S992X variant has:
> +- 2GB LPDDR4 RAM
> +
> +The A311D variant has:
> +
> +- 4GB LPDDR4 RAM
> +- NPU (5.0 TOPS)
> +- MIPI DSI header
> +- MIPI CSI header
> +
> +An optional RTL8822CS SDIO WiFi/BT mezzanine is available for both board variants.
> +
> +Schematics are available from the manufacturer: https://wiki.banana-pi.org/Banana_Pi_BPI-M2S
> +
> +U-Boot Compilation
> +------------------
> +
> +.. code-block:: bash
> +
> + $ export CROSS_COMPILE=aarch64-none-elf-
> + $ make bananapi-m2s_defconfig
> + $ make
> +
> +U-Boot Signing with Pre-Built FIP repo
> +--------------------------------------
> +
> +.. code-block:: bash
> +
> + $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
> + $ cd amlogic-boot-fip
> + $ mkdir my-output-dir
> + $ ./build-fip.sh bananapi-m2s /path/to/u-boot/u-boot.bin my-output-dir
> +
> +U-Boot Manual Signing
> +---------------------
> +
> +Amlogic does not provide sources for the firmware and tools needed to create a bootloader
> +image so it is necessary to obtain binaries from sources published by the board vendor:
> +
> +.. code-block:: bash
> +
> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
> + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
> + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
> + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
> + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
> +
> + $ DIR=bananapi-m2s
> + $ git clone --depth 1 https://github.com/Dangku/amlogic-u-boot.git -b khadas-g12b-v2015.01-m2s $DIR
> +
> + $ cd $DIR
> + $ make bananapi_m2s_defconfig
> + $ make
> + $ export UBDIR=$PWD
> +
> +Go back to the mainline U-Boot source tree then:
> +
> +.. code-block:: bash
> +
> + $ mkdir fip
> +
> + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
> + $ cp $UBDIR/build/scp_task/bl301.bin fip/
> + $ cp $UBDIR/build/board/bananapi/bananpi_m2s/firmware/acs.bin fip/
> + $ cp $UBDIR/fip/g12a/bl2.bin fip/
> + $ cp $UBDIR/fip/g12a/bl30.bin fip/
> + $ cp $UBDIR/fip/g12a/bl31.img fip/
> + $ cp $UBDIR/fip/g12a/ddr3_1d.fw fip/
> + $ cp $UBDIR/fip/g12a/ddr4_1d.fw fip/
> + $ cp $UBDIR/fip/g12a/ddr4_2d.fw fip/
> + $ cp $UBDIR/fip/g12a/diag_lpddr4.fw fip/
> + $ cp $UBDIR/fip/g12a/lpddr3_1d.fw fip/
> + $ cp $UBDIR/fip/g12a/lpddr4_1d.fw fip/
> + $ cp $UBDIR/fip/g12a/lpddr4_2d.fw fip/
> + $ cp $UBDIR/fip/g12a/piei.fw fip/
> + $ cp $UBDIR/fip/g12a/aml_ddr.fw fip/
> + $ cp u-boot.bin fip/bl33.bin
> +
> + $ sh fip/blx_fix.sh \
> + fip/bl30.bin \
> + fip/zero_tmp \
> + fip/bl30_zero.bin \
> + fip/bl301.bin \
> + fip/bl301_zero.bin \
> + fip/bl30_new.bin \
> + bl30
> +
> + $ sh fip/blx_fix.sh \
> + fip/bl2.bin \
> + fip/zero_tmp \
> + fip/bl2_zero.bin \
> + fip/acs.bin \
> + fip/bl21_zero.bin \
> + fip/bl2_new.bin \
> + bl2
> +
> + $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
> + --output fip/bl30_new.bin.g12a.enc \
> + --level v3
> + $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
> + --output fip/bl30_new.bin.enc \
> + --level v3 --type bl30
> + $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
> + --output fip/bl31.img.enc \
> + --level v3 --type bl31
> + $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
> + --output fip/bl33.bin.enc \
> + --level v3 --type bl33 --compress lz4
> + $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
> + --output fip/bl2.n.bin.sig
> + $ $UBDIR/fip/g12b/aml_encrypt_g12b --bootmk \
> + --output fip/u-boot.bin \
> + --bl2 fip/bl2.n.bin.sig \
> + --bl30 fip/bl30_new.bin.enc \
> + --bl31 fip/bl31.img.enc \
> + --bl33 fip/bl33.bin.enc \
> + --ddrfw1 fip/ddr4_1d.fw \
> + --ddrfw2 fip/ddr4_2d.fw \
> + --ddrfw3 fip/ddr3_1d.fw \
> + --ddrfw4 fip/piei.fw \
> + --ddrfw5 fip/lpddr4_1d.fw \
> + --ddrfw6 fip/lpddr4_2d.fw \
> + --ddrfw7 fip/diag_lpddr4.fw \
> + --ddrfw8 fip/aml_ddr.fw \
> + --ddrfw9 fip/lpddr3_1d.fw \
> + --level v3
> +
> +Then write the image to SD or eMMC with:
> +
> +.. code-block:: bash
> +
> + $ DEV=/dev/boot_device
> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
> + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
> diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
> index 8388acdd11..fa1b362731 100644
> --- a/doc/board/amlogic/index.rst
> +++ b/doc/board/amlogic/index.rst
> @@ -87,6 +87,7 @@ Board Documentation
>
> bananapi-cm4io
> bananapi-m2pro
> + bananapi-m2s
> bananapi-m5
> beelink-gskingx
> beelink-gtking
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2023-03-23 15:01 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-23 14:31 [PATCH v2 00/14] boards: amlogic: add BananaPi/Radxa/WeTek boards Christian Hewitt
2023-03-23 14:31 ` [PATCH v2 01/14] docs: boards: amlogic: add bananapi-m5 to u200 maintainer file Christian Hewitt
2023-03-23 14:31 ` [PATCH v2 02/14] docs: boards: amlogic: fix blank-line typo in recently updated docs Christian Hewitt
2023-03-23 14:31 ` [PATCH v2 03/14] ARM: dts: add support for BananaPi M2-Pro Christian Hewitt
2023-03-23 14:31 ` [PATCH v2 04/14] boards: add BananaPi M2-Pro defconfig Christian Hewitt
2023-03-23 14:31 ` [PATCH v2 05/14] docs: boards: amlogic: add documentation for BananaPi M2-Pro Christian Hewitt
2023-03-23 15:01 ` Neil Armstrong
2023-03-23 14:31 ` [PATCH v2 06/14] ARM: dts: add support for BananaPi M2S Christian Hewitt
2023-03-23 14:31 ` [PATCH v2 07/14] boards: add BananaPi M2S defconfig Christian Hewitt
2023-03-23 14:31 ` [PATCH v2 08/14] docs: boards: amlogic: add documentation for BananaPi M2S Christian Hewitt
2023-03-23 15:01 ` Neil Armstrong [this message]
2023-03-23 14:31 ` [PATCH v2 09/14] ARM: dts: add support for Radxa Zero2 Christian Hewitt
2023-03-23 14:31 ` [PATCH v2 10/14] boards: amlogic: add Radxa Zero2 defconfig Christian Hewitt
2023-03-23 14:31 ` [PATCH v2 11/14] doc: boards: amlogic: add documentation for Radxa Zero2 Christian Hewitt
2023-03-23 15:01 ` Neil Armstrong
2023-03-23 14:31 ` [PATCH v2 12/14] ARM: dts: add support for WeTek Hub and WeTek Play2 Christian Hewitt
2023-03-23 14:31 ` [PATCH v2 13/14] boards: amlogic: add WeTek Hub and WeTek Play2 defconfig Christian Hewitt
2023-03-23 15:02 ` Neil Armstrong
2023-03-23 14:31 ` [PATCH v2 14/14] doc: boards: amlogic: add documentation for WeTek Hub and WeTek Play2 Christian Hewitt
2023-03-23 15:02 ` Neil Armstrong
2023-03-23 15:38 ` (subset) [PATCH v2 00/14] boards: amlogic: add BananaPi/Radxa/WeTek boards Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f8555a7c-8dfb-d803-e422-2534a4df2c8e@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=christianshewitt@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=u-boot-amlogic@groups.io \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).