* [PATCH v6 4/7] mm: refactoring TLB gathering API [not found] <20170802000818.4760-1-namit@vmware.com> @ 2017-08-02 0:08 ` Nadav Amit 2017-08-02 0:08 ` Nadav Amit 2017-08-11 9:23 ` Peter Zijlstra 2017-08-02 0:08 ` [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem Nadav Amit 1 sibling, 2 replies; 35+ messages in thread From: Nadav Amit @ 2017-08-02 0:08 UTC (permalink / raw) To: linux-mm Cc: nadav.amit, linux-kernel, akpm, Minchan Kim, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, Mel Gorman, Nadav Amit From: Minchan Kim <minchan@kernel.org> This patch is a preparatory patch for solving race problems caused by TLB batch. For that, we will increase/decrease TLB flush pending count of mm_struct whenever tlb_[gather|finish]_mmu is called. Before making it simple, this patch separates architecture specific part and rename it to arch_tlb_[gather|finish]_mmu and generic part just calls it. It shouldn't change any behavior. Cc: Ingo Molnar <mingo@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Jeff Dike <jdike@addtoit.com> Cc: linux-arch@vger.kernel.org Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> --- arch/arm/include/asm/tlb.h | 6 ++++-- arch/ia64/include/asm/tlb.h | 6 ++++-- arch/s390/include/asm/tlb.h | 12 ++++++------ arch/sh/include/asm/tlb.h | 6 ++++-- arch/um/include/asm/tlb.h | 8 +++++--- include/asm-generic/tlb.h | 7 ++++--- include/linux/mm_types.h | 6 ++++++ mm/memory.c | 28 +++++++++++++++++++++------- 8 files changed, 54 insertions(+), 25 deletions(-) diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 3f2eb76243e3..7f5b2a2d3861 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -148,7 +148,8 @@ static inline void tlb_flush_mmu(struct mmu_gather *tlb) } static inline void -tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) +arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end) { tlb->mm = mm; tlb->fullmm = !(start | (end+1)); @@ -166,7 +167,8 @@ tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start } static inline void -tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) +arch_tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end) { tlb_flush_mmu(tlb); diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index fced197b9626..93cadc04ac62 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -168,7 +168,8 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb) static inline void -tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) +arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end) { tlb->mm = mm; tlb->max = ARRAY_SIZE(tlb->local); @@ -185,7 +186,8 @@ tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start * collected. */ static inline void -tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) +arch_tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end) { /* * Note: tlb->nr may be 0 at this point, so we can't rely on tlb->start_addr and diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h index 853b2a3d8dee..0e59ef57e234 100644 --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -47,10 +47,9 @@ struct mmu_table_batch { extern void tlb_table_flush(struct mmu_gather *tlb); extern void tlb_remove_table(struct mmu_gather *tlb, void *table); -static inline void tlb_gather_mmu(struct mmu_gather *tlb, - struct mm_struct *mm, - unsigned long start, - unsigned long end) +static inline void +arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end) { tlb->mm = mm; tlb->start = start; @@ -76,8 +75,9 @@ static inline void tlb_flush_mmu(struct mmu_gather *tlb) tlb_flush_mmu_free(tlb); } -static inline void tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) +static inline void +arch_tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end) { tlb_flush_mmu(tlb); } diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h index 46e0d635e36f..89786560dbd4 100644 --- a/arch/sh/include/asm/tlb.h +++ b/arch/sh/include/asm/tlb.h @@ -36,7 +36,8 @@ static inline void init_tlb_gather(struct mmu_gather *tlb) } static inline void -tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) +arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end) { tlb->mm = mm; tlb->start = start; @@ -47,7 +48,8 @@ tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start } static inline void -tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) +arch_tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end) { if (tlb->fullmm) flush_tlb_mm(tlb->mm); diff --git a/arch/um/include/asm/tlb.h b/arch/um/include/asm/tlb.h index 600a2e9bfee2..2a901eca7145 100644 --- a/arch/um/include/asm/tlb.h +++ b/arch/um/include/asm/tlb.h @@ -45,7 +45,8 @@ static inline void init_tlb_gather(struct mmu_gather *tlb) } static inline void -tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) +arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end) { tlb->mm = mm; tlb->start = start; @@ -80,12 +81,13 @@ tlb_flush_mmu(struct mmu_gather *tlb) tlb_flush_mmu_free(tlb); } -/* tlb_finish_mmu +/* arch_tlb_finish_mmu * Called at the end of the shootdown operation to free up any resources * that were required. */ static inline void -tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) +arch_tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end) { tlb_flush_mmu(tlb); diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h index 8afa4335e5b2..8f71521e7a44 100644 --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -112,10 +112,11 @@ struct mmu_gather { #define HAVE_GENERIC_MMU_GATHER -void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end); +void arch_tlb_gather_mmu(struct mmu_gather *tlb, + struct mm_struct *mm, unsigned long start, unsigned long end); void tlb_flush_mmu(struct mmu_gather *tlb); -void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, - unsigned long end); +void arch_tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end); extern bool __tlb_remove_page_size(struct mmu_gather *tlb, struct page *page, int page_size); diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 2956513619a7..248f4ed1f3e1 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -518,6 +518,12 @@ static inline cpumask_t *mm_cpumask(struct mm_struct *mm) return mm->cpu_vm_mask_var; } +struct mmu_gather; +extern void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end); +extern void tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end); + #if defined(CONFIG_NUMA_BALANCING) || defined(CONFIG_COMPACTION) /* * Memory barriers to keep this state in sync are graciously provided by diff --git a/mm/memory.c b/mm/memory.c index bb11c474857e..7848b5030be0 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -215,12 +215,8 @@ static bool tlb_next_batch(struct mmu_gather *tlb) return true; } -/* tlb_gather_mmu - * Called to initialize an (on-stack) mmu_gather structure for page-table - * tear-down from @mm. The @fullmm argument is used when @mm is without - * users and we're going to destroy the full address space (exit/execve). - */ -void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) +void arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end) { tlb->mm = mm; @@ -275,7 +271,8 @@ void tlb_flush_mmu(struct mmu_gather *tlb) * Called at the end of the shootdown operation to free up any resources * that were required. */ -void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) +void arch_tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end) { struct mmu_gather_batch *batch, *next; @@ -398,6 +395,23 @@ void tlb_remove_table(struct mmu_gather *tlb, void *table) #endif /* CONFIG_HAVE_RCU_TABLE_FREE */ +/* tlb_gather_mmu + * Called to initialize an (on-stack) mmu_gather structure for page-table + * tear-down from @mm. The @fullmm argument is used when @mm is without + * users and we're going to destroy the full address space (exit/execve). + */ +void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + arch_tlb_gather_mmu(tlb, mm, start, end); +} + +void tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end) +{ + arch_tlb_finish_mmu(tlb, start, end); +} + /* * Note: this doesn't free the actual pages themselves. That * has been handled earlier when unmapping all the memory regions. -- 2.11.0 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@kvack.org. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a> ^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCH v6 4/7] mm: refactoring TLB gathering API 2017-08-02 0:08 ` [PATCH v6 4/7] mm: refactoring TLB gathering API Nadav Amit @ 2017-08-02 0:08 ` Nadav Amit 2017-08-11 9:23 ` Peter Zijlstra 1 sibling, 0 replies; 35+ messages in thread From: Nadav Amit @ 2017-08-02 0:08 UTC (permalink / raw) To: linux-mm Cc: nadav.amit, linux-kernel, akpm, Minchan Kim, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, Mel Gorman, Nadav Amit From: Minchan Kim <minchan@kernel.org> This patch is a preparatory patch for solving race problems caused by TLB batch. For that, we will increase/decrease TLB flush pending count of mm_struct whenever tlb_[gather|finish]_mmu is called. Before making it simple, this patch separates architecture specific part and rename it to arch_tlb_[gather|finish]_mmu and generic part just calls it. It shouldn't change any behavior. Cc: Ingo Molnar <mingo@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Jeff Dike <jdike@addtoit.com> Cc: linux-arch@vger.kernel.org Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> --- arch/arm/include/asm/tlb.h | 6 ++++-- arch/ia64/include/asm/tlb.h | 6 ++++-- arch/s390/include/asm/tlb.h | 12 ++++++------ arch/sh/include/asm/tlb.h | 6 ++++-- arch/um/include/asm/tlb.h | 8 +++++--- include/asm-generic/tlb.h | 7 ++++--- include/linux/mm_types.h | 6 ++++++ mm/memory.c | 28 +++++++++++++++++++++------- 8 files changed, 54 insertions(+), 25 deletions(-) diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 3f2eb76243e3..7f5b2a2d3861 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -148,7 +148,8 @@ static inline void tlb_flush_mmu(struct mmu_gather *tlb) } static inline void -tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) +arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end) { tlb->mm = mm; tlb->fullmm = !(start | (end+1)); @@ -166,7 +167,8 @@ tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start } static inline void -tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) +arch_tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end) { tlb_flush_mmu(tlb); diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index fced197b9626..93cadc04ac62 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -168,7 +168,8 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb) static inline void -tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) +arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end) { tlb->mm = mm; tlb->max = ARRAY_SIZE(tlb->local); @@ -185,7 +186,8 @@ tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start * collected. */ static inline void -tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) +arch_tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end) { /* * Note: tlb->nr may be 0 at this point, so we can't rely on tlb->start_addr and diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h index 853b2a3d8dee..0e59ef57e234 100644 --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -47,10 +47,9 @@ struct mmu_table_batch { extern void tlb_table_flush(struct mmu_gather *tlb); extern void tlb_remove_table(struct mmu_gather *tlb, void *table); -static inline void tlb_gather_mmu(struct mmu_gather *tlb, - struct mm_struct *mm, - unsigned long start, - unsigned long end) +static inline void +arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end) { tlb->mm = mm; tlb->start = start; @@ -76,8 +75,9 @@ static inline void tlb_flush_mmu(struct mmu_gather *tlb) tlb_flush_mmu_free(tlb); } -static inline void tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) +static inline void +arch_tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end) { tlb_flush_mmu(tlb); } diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h index 46e0d635e36f..89786560dbd4 100644 --- a/arch/sh/include/asm/tlb.h +++ b/arch/sh/include/asm/tlb.h @@ -36,7 +36,8 @@ static inline void init_tlb_gather(struct mmu_gather *tlb) } static inline void -tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) +arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end) { tlb->mm = mm; tlb->start = start; @@ -47,7 +48,8 @@ tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start } static inline void -tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) +arch_tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end) { if (tlb->fullmm) flush_tlb_mm(tlb->mm); diff --git a/arch/um/include/asm/tlb.h b/arch/um/include/asm/tlb.h index 600a2e9bfee2..2a901eca7145 100644 --- a/arch/um/include/asm/tlb.h +++ b/arch/um/include/asm/tlb.h @@ -45,7 +45,8 @@ static inline void init_tlb_gather(struct mmu_gather *tlb) } static inline void -tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) +arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end) { tlb->mm = mm; tlb->start = start; @@ -80,12 +81,13 @@ tlb_flush_mmu(struct mmu_gather *tlb) tlb_flush_mmu_free(tlb); } -/* tlb_finish_mmu +/* arch_tlb_finish_mmu * Called at the end of the shootdown operation to free up any resources * that were required. */ static inline void -tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) +arch_tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end) { tlb_flush_mmu(tlb); diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h index 8afa4335e5b2..8f71521e7a44 100644 --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -112,10 +112,11 @@ struct mmu_gather { #define HAVE_GENERIC_MMU_GATHER -void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end); +void arch_tlb_gather_mmu(struct mmu_gather *tlb, + struct mm_struct *mm, unsigned long start, unsigned long end); void tlb_flush_mmu(struct mmu_gather *tlb); -void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, - unsigned long end); +void arch_tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end); extern bool __tlb_remove_page_size(struct mmu_gather *tlb, struct page *page, int page_size); diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 2956513619a7..248f4ed1f3e1 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -518,6 +518,12 @@ static inline cpumask_t *mm_cpumask(struct mm_struct *mm) return mm->cpu_vm_mask_var; } +struct mmu_gather; +extern void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end); +extern void tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end); + #if defined(CONFIG_NUMA_BALANCING) || defined(CONFIG_COMPACTION) /* * Memory barriers to keep this state in sync are graciously provided by diff --git a/mm/memory.c b/mm/memory.c index bb11c474857e..7848b5030be0 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -215,12 +215,8 @@ static bool tlb_next_batch(struct mmu_gather *tlb) return true; } -/* tlb_gather_mmu - * Called to initialize an (on-stack) mmu_gather structure for page-table - * tear-down from @mm. The @fullmm argument is used when @mm is without - * users and we're going to destroy the full address space (exit/execve). - */ -void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) +void arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end) { tlb->mm = mm; @@ -275,7 +271,8 @@ void tlb_flush_mmu(struct mmu_gather *tlb) * Called at the end of the shootdown operation to free up any resources * that were required. */ -void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) +void arch_tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end) { struct mmu_gather_batch *batch, *next; @@ -398,6 +395,23 @@ void tlb_remove_table(struct mmu_gather *tlb, void *table) #endif /* CONFIG_HAVE_RCU_TABLE_FREE */ +/* tlb_gather_mmu + * Called to initialize an (on-stack) mmu_gather structure for page-table + * tear-down from @mm. The @fullmm argument is used when @mm is without + * users and we're going to destroy the full address space (exit/execve). + */ +void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + arch_tlb_gather_mmu(tlb, mm, start, end); +} + +void tlb_finish_mmu(struct mmu_gather *tlb, + unsigned long start, unsigned long end) +{ + arch_tlb_finish_mmu(tlb, start, end); +} + /* * Note: this doesn't free the actual pages themselves. That * has been handled earlier when unmapping all the memory regions. -- 2.11.0 ^ permalink raw reply related [flat|nested] 35+ messages in thread
* Re: [PATCH v6 4/7] mm: refactoring TLB gathering API 2017-08-02 0:08 ` [PATCH v6 4/7] mm: refactoring TLB gathering API Nadav Amit 2017-08-02 0:08 ` Nadav Amit @ 2017-08-11 9:23 ` Peter Zijlstra 2017-08-11 9:23 ` Peter Zijlstra 2017-08-11 17:12 ` Nadav Amit 1 sibling, 2 replies; 35+ messages in thread From: Peter Zijlstra @ 2017-08-11 9:23 UTC (permalink / raw) To: Nadav Amit Cc: linux-mm, nadav.amit, linux-kernel, akpm, Minchan Kim, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, Mel Gorman On Tue, Aug 01, 2017 at 05:08:15PM -0700, Nadav Amit wrote: > From: Minchan Kim <minchan@kernel.org> > > This patch is a preparatory patch for solving race problems caused by > TLB batch. For that, we will increase/decrease TLB flush pending count > of mm_struct whenever tlb_[gather|finish]_mmu is called. > > Before making it simple, this patch separates architecture specific > part and rename it to arch_tlb_[gather|finish]_mmu and generic part > just calls it. I absolutely hate this. We should unify this stuff, not diverge it further. -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@kvack.org. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a> ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH v6 4/7] mm: refactoring TLB gathering API 2017-08-11 9:23 ` Peter Zijlstra @ 2017-08-11 9:23 ` Peter Zijlstra 2017-08-11 17:12 ` Nadav Amit 1 sibling, 0 replies; 35+ messages in thread From: Peter Zijlstra @ 2017-08-11 9:23 UTC (permalink / raw) To: Nadav Amit Cc: linux-mm, nadav.amit, linux-kernel, akpm, Minchan Kim, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, Mel Gorman On Tue, Aug 01, 2017 at 05:08:15PM -0700, Nadav Amit wrote: > From: Minchan Kim <minchan@kernel.org> > > This patch is a preparatory patch for solving race problems caused by > TLB batch. For that, we will increase/decrease TLB flush pending count > of mm_struct whenever tlb_[gather|finish]_mmu is called. > > Before making it simple, this patch separates architecture specific > part and rename it to arch_tlb_[gather|finish]_mmu and generic part > just calls it. I absolutely hate this. We should unify this stuff, not diverge it further. ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH v6 4/7] mm: refactoring TLB gathering API 2017-08-11 9:23 ` Peter Zijlstra 2017-08-11 9:23 ` Peter Zijlstra @ 2017-08-11 17:12 ` Nadav Amit 2017-08-11 17:12 ` Nadav Amit 2017-08-14 0:49 ` Minchan Kim 1 sibling, 2 replies; 35+ messages in thread From: Nadav Amit @ 2017-08-11 17:12 UTC (permalink / raw) To: Peter Zijlstra Cc: open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Minchan Kim, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, Mel Gorman Peter Zijlstra <peterz@infradead.org> wrote: > On Tue, Aug 01, 2017 at 05:08:15PM -0700, Nadav Amit wrote: >> From: Minchan Kim <minchan@kernel.org> >> >> This patch is a preparatory patch for solving race problems caused by >> TLB batch. For that, we will increase/decrease TLB flush pending count >> of mm_struct whenever tlb_[gather|finish]_mmu is called. >> >> Before making it simple, this patch separates architecture specific >> part and rename it to arch_tlb_[gather|finish]_mmu and generic part >> just calls it. > > I absolutely hate this. We should unify this stuff, not diverge it > further. Agreed, but I don’t see how this patch makes the situation any worse. I’ll review your other comments by tomorrow due to some personal constraints. ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH v6 4/7] mm: refactoring TLB gathering API 2017-08-11 17:12 ` Nadav Amit @ 2017-08-11 17:12 ` Nadav Amit 2017-08-14 0:49 ` Minchan Kim 1 sibling, 0 replies; 35+ messages in thread From: Nadav Amit @ 2017-08-11 17:12 UTC (permalink / raw) To: Peter Zijlstra Cc: open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Minchan Kim, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, Mel Gorman Peter Zijlstra <peterz@infradead.org> wrote: > On Tue, Aug 01, 2017 at 05:08:15PM -0700, Nadav Amit wrote: >> From: Minchan Kim <minchan@kernel.org> >> >> This patch is a preparatory patch for solving race problems caused by >> TLB batch. For that, we will increase/decrease TLB flush pending count >> of mm_struct whenever tlb_[gather|finish]_mmu is called. >> >> Before making it simple, this patch separates architecture specific >> part and rename it to arch_tlb_[gather|finish]_mmu and generic part >> just calls it. > > I absolutely hate this. We should unify this stuff, not diverge it > further. Agreed, but I don’t see how this patch makes the situation any worse. I’ll review your other comments by tomorrow due to some personal constraints. ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH v6 4/7] mm: refactoring TLB gathering API 2017-08-11 17:12 ` Nadav Amit 2017-08-11 17:12 ` Nadav Amit @ 2017-08-14 0:49 ` Minchan Kim 1 sibling, 0 replies; 35+ messages in thread From: Minchan Kim @ 2017-08-14 0:49 UTC (permalink / raw) To: Nadav Amit Cc: Peter Zijlstra, open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, Mel Gorman On Fri, Aug 11, 2017 at 10:12:45AM -0700, Nadav Amit wrote: > Peter Zijlstra <peterz@infradead.org> wrote: > > > On Tue, Aug 01, 2017 at 05:08:15PM -0700, Nadav Amit wrote: > >> From: Minchan Kim <minchan@kernel.org> > >> > >> This patch is a preparatory patch for solving race problems caused by > >> TLB batch. For that, we will increase/decrease TLB flush pending count > >> of mm_struct whenever tlb_[gather|finish]_mmu is called. > >> > >> Before making it simple, this patch separates architecture specific > >> part and rename it to arch_tlb_[gather|finish]_mmu and generic part > >> just calls it. > > > > I absolutely hate this. We should unify this stuff, not diverge it > > further. > > Agreed, but I don’t see how this patch makes the situation any worse. Agree with Nadav. I don't think this patch makes things diverge further. Peter, If you are strong against of it, please tell us what part you are hating. ^ permalink raw reply [flat|nested] 35+ messages in thread
* [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem [not found] <20170802000818.4760-1-namit@vmware.com> 2017-08-02 0:08 ` [PATCH v6 4/7] mm: refactoring TLB gathering API Nadav Amit @ 2017-08-02 0:08 ` Nadav Amit 2017-08-02 0:08 ` Nadav Amit ` (2 more replies) 1 sibling, 3 replies; 35+ messages in thread From: Nadav Amit @ 2017-08-02 0:08 UTC (permalink / raw) To: linux-mm Cc: nadav.amit, linux-kernel, akpm, Minchan Kim, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, Nadav Amit From: Minchan Kim <minchan@kernel.org> Nadav reported parallel MADV_DONTNEED on same range has a stale TLB problem and Mel fixed it[1] and found same problem on MADV_FREE[2]. Quote from Mel Gorman "The race in question is CPU 0 running madv_free and updating some PTEs while CPU 1 is also running madv_free and looking at the same PTEs. CPU 1 may have writable TLB entries for a page but fail the pte_dirty check (because CPU 0 has updated it already) and potentially fail to flush. Hence, when madv_free on CPU 1 returns, there are still potentially writable TLB entries and the underlying PTE is still present so that a subsequent write does not necessarily propagate the dirty bit to the underlying PTE any more. Reclaim at some unknown time at the future may then see that the PTE is still clean and discard the page even though a write has happened in the meantime. I think this is possible but I could have missed some protection in madv_free that prevents it happening." This patch aims for solving both problems all at once and is ready for other problem with KSM, MADV_FREE and soft-dirty story[3]. TLB batch API(tlb_[gather|finish]_mmu] uses [inc|dec]_tlb_flush_pending and mmu_tlb_flush_pending so that when tlb_finish_mmu is called, we can catch there are parallel threads going on. In that case, forcefully, flush TLB to prevent for user to access memory via stale TLB entry although it fail to gather page table entry. I confirmed this patch works with [4] test program Nadav gave so this patch supersedes "mm: Always flush VMA ranges affected by zap_page_range v2" in current mmotm. NOTE: This patch modifies arch-specific TLB gathering interface(x86, ia64, s390, sh, um). It seems most of architecture are straightforward but s390 need to be careful because tlb_flush_mmu works only if mm->context.flush_mm is set to non-zero which happens only a pte entry really is cleared by ptep_get_and_clear and friends. However, this problem never changes the pte entries but need to flush to prevent memory access from stale tlb. [1] http://lkml.kernel.org/r/20170725101230.5v7gvnjmcnkzzql3@techsingularity.net [2] http://lkml.kernel.org/r/20170725100722.2dxnmgypmwnrfawp@suse.de [3] http://lkml.kernel.org/r/BD3A0EBE-ECF4-41D4-87FA-C755EA9AB6BD@gmail.com [4] https://patchwork.kernel.org/patch/9861621/ Cc: Ingo Molnar <mingo@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Jeff Dike <jdike@addtoit.com> Cc: linux-arch@vger.kernel.org Reported-by: Nadav Amit <namit@vmware.com> Reported-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> --- arch/arm/include/asm/tlb.h | 7 ++++++- arch/ia64/include/asm/tlb.h | 4 +++- arch/s390/include/asm/tlb.h | 7 ++++++- arch/sh/include/asm/tlb.h | 4 ++-- arch/um/include/asm/tlb.h | 7 ++++++- include/asm-generic/tlb.h | 2 +- include/linux/mm_types.h | 8 ++++++++ mm/memory.c | 17 +++++++++++++++-- 8 files changed, 47 insertions(+), 9 deletions(-) diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 7f5b2a2d3861..d5562f9ce600 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -168,8 +168,13 @@ arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, static inline void arch_tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) + unsigned long start, unsigned long end, bool force) { + if (force) { + tlb->range_start = start; + tlb->range_end = end; + } + tlb_flush_mmu(tlb); /* keep the page table cache within bounds */ diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index 93cadc04ac62..cbe5ac3699bf 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -187,8 +187,10 @@ arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, */ static inline void arch_tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) + unsigned long start, unsigned long end, bool force) { + if (force) + tlb->need_flush = 1; /* * Note: tlb->nr may be 0 at this point, so we can't rely on tlb->start_addr and * tlb->end_addr. diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h index 0e59ef57e234..b20a3621024f 100644 --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -77,8 +77,13 @@ static inline void tlb_flush_mmu(struct mmu_gather *tlb) static inline void arch_tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) + unsigned long start, unsigned long end, bool force) { + if (force) { + tlb->start = start; + tlb->end = end; + } + tlb_flush_mmu(tlb); } diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h index 89786560dbd4..51a8bc967e75 100644 --- a/arch/sh/include/asm/tlb.h +++ b/arch/sh/include/asm/tlb.h @@ -49,9 +49,9 @@ arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, static inline void arch_tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) + unsigned long start, unsigned long end, bool force) { - if (tlb->fullmm) + if (tlb->fullmm || force) flush_tlb_mm(tlb->mm); /* keep the page table cache within bounds */ diff --git a/arch/um/include/asm/tlb.h b/arch/um/include/asm/tlb.h index 2a901eca7145..344d95619d03 100644 --- a/arch/um/include/asm/tlb.h +++ b/arch/um/include/asm/tlb.h @@ -87,8 +87,13 @@ tlb_flush_mmu(struct mmu_gather *tlb) */ static inline void arch_tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) + unsigned long start, unsigned long end, bool force) { + if (force) { + tlb->start = start; + tlb->end = end; + tlb->need_flush = 1; + } tlb_flush_mmu(tlb); /* keep the page table cache within bounds */ diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h index 8f71521e7a44..faddde44de8c 100644 --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -116,7 +116,7 @@ void arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end); void tlb_flush_mmu(struct mmu_gather *tlb); void arch_tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end); + unsigned long start, unsigned long end, bool force); extern bool __tlb_remove_page_size(struct mmu_gather *tlb, struct page *page, int page_size); diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index fc44315df47a..664c1e553228 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -534,6 +534,14 @@ static inline bool mm_tlb_flush_pending(struct mm_struct *mm) return atomic_read(&mm->tlb_flush_pending) > 0; } +/* + * Returns true if there are two above TLB batching threads in parallel. + */ +static inline bool mm_tlb_flush_nested(struct mm_struct *mm) +{ + return atomic_read(&mm->tlb_flush_pending) > 1; +} + static inline void init_tlb_flush_pending(struct mm_struct *mm) { atomic_set(&mm->tlb_flush_pending, 0); diff --git a/mm/memory.c b/mm/memory.c index 7848b5030be0..d7a620dd183a 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -272,10 +272,13 @@ void tlb_flush_mmu(struct mmu_gather *tlb) * that were required. */ void arch_tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) + unsigned long start, unsigned long end, bool force) { struct mmu_gather_batch *batch, *next; + if (force) + __tlb_adjust_range(tlb, start, end - start); + tlb_flush_mmu(tlb); /* keep the page table cache within bounds */ @@ -404,12 +407,22 @@ void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) { arch_tlb_gather_mmu(tlb, mm, start, end); + inc_tlb_flush_pending(tlb->mm); } void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) { - arch_tlb_finish_mmu(tlb, start, end); + /* + * If there are parallel threads are doing PTE changes on same range + * under non-exclusive lock(e.g., mmap_sem read-side) but defer TLB + * flush by batching, a thread has stable TLB entry can fail to flush + * the TLB by observing pte_none|!pte_dirty, for example so flush TLB + * forcefully if we detect parallel PTE batching threads. + */ + bool force = mm_tlb_flush_nested(tlb->mm); + + arch_tlb_finish_mmu(tlb, start, end, force); } /* -- 2.11.0 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@kvack.org. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a> ^ permalink raw reply related [flat|nested] 35+ messages in thread
* [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem 2017-08-02 0:08 ` [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem Nadav Amit @ 2017-08-02 0:08 ` Nadav Amit 2017-08-08 1:19 ` [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression kernel test robot 2017-08-11 13:30 ` [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem Peter Zijlstra 2 siblings, 0 replies; 35+ messages in thread From: Nadav Amit @ 2017-08-02 0:08 UTC (permalink / raw) To: linux-mm Cc: nadav.amit, linux-kernel, akpm, Minchan Kim, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, Nadav Amit From: Minchan Kim <minchan@kernel.org> Nadav reported parallel MADV_DONTNEED on same range has a stale TLB problem and Mel fixed it[1] and found same problem on MADV_FREE[2]. Quote from Mel Gorman "The race in question is CPU 0 running madv_free and updating some PTEs while CPU 1 is also running madv_free and looking at the same PTEs. CPU 1 may have writable TLB entries for a page but fail the pte_dirty check (because CPU 0 has updated it already) and potentially fail to flush. Hence, when madv_free on CPU 1 returns, there are still potentially writable TLB entries and the underlying PTE is still present so that a subsequent write does not necessarily propagate the dirty bit to the underlying PTE any more. Reclaim at some unknown time at the future may then see that the PTE is still clean and discard the page even though a write has happened in the meantime. I think this is possible but I could have missed some protection in madv_free that prevents it happening." This patch aims for solving both problems all at once and is ready for other problem with KSM, MADV_FREE and soft-dirty story[3]. TLB batch API(tlb_[gather|finish]_mmu] uses [inc|dec]_tlb_flush_pending and mmu_tlb_flush_pending so that when tlb_finish_mmu is called, we can catch there are parallel threads going on. In that case, forcefully, flush TLB to prevent for user to access memory via stale TLB entry although it fail to gather page table entry. I confirmed this patch works with [4] test program Nadav gave so this patch supersedes "mm: Always flush VMA ranges affected by zap_page_range v2" in current mmotm. NOTE: This patch modifies arch-specific TLB gathering interface(x86, ia64, s390, sh, um). It seems most of architecture are straightforward but s390 need to be careful because tlb_flush_mmu works only if mm->context.flush_mm is set to non-zero which happens only a pte entry really is cleared by ptep_get_and_clear and friends. However, this problem never changes the pte entries but need to flush to prevent memory access from stale tlb. [1] http://lkml.kernel.org/r/20170725101230.5v7gvnjmcnkzzql3@techsingularity.net [2] http://lkml.kernel.org/r/20170725100722.2dxnmgypmwnrfawp@suse.de [3] http://lkml.kernel.org/r/BD3A0EBE-ECF4-41D4-87FA-C755EA9AB6BD@gmail.com [4] https://patchwork.kernel.org/patch/9861621/ Cc: Ingo Molnar <mingo@redhat.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Jeff Dike <jdike@addtoit.com> Cc: linux-arch@vger.kernel.org Reported-by: Nadav Amit <namit@vmware.com> Reported-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> --- arch/arm/include/asm/tlb.h | 7 ++++++- arch/ia64/include/asm/tlb.h | 4 +++- arch/s390/include/asm/tlb.h | 7 ++++++- arch/sh/include/asm/tlb.h | 4 ++-- arch/um/include/asm/tlb.h | 7 ++++++- include/asm-generic/tlb.h | 2 +- include/linux/mm_types.h | 8 ++++++++ mm/memory.c | 17 +++++++++++++++-- 8 files changed, 47 insertions(+), 9 deletions(-) diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 7f5b2a2d3861..d5562f9ce600 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -168,8 +168,13 @@ arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, static inline void arch_tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) + unsigned long start, unsigned long end, bool force) { + if (force) { + tlb->range_start = start; + tlb->range_end = end; + } + tlb_flush_mmu(tlb); /* keep the page table cache within bounds */ diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index 93cadc04ac62..cbe5ac3699bf 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -187,8 +187,10 @@ arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, */ static inline void arch_tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) + unsigned long start, unsigned long end, bool force) { + if (force) + tlb->need_flush = 1; /* * Note: tlb->nr may be 0 at this point, so we can't rely on tlb->start_addr and * tlb->end_addr. diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h index 0e59ef57e234..b20a3621024f 100644 --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -77,8 +77,13 @@ static inline void tlb_flush_mmu(struct mmu_gather *tlb) static inline void arch_tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) + unsigned long start, unsigned long end, bool force) { + if (force) { + tlb->start = start; + tlb->end = end; + } + tlb_flush_mmu(tlb); } diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h index 89786560dbd4..51a8bc967e75 100644 --- a/arch/sh/include/asm/tlb.h +++ b/arch/sh/include/asm/tlb.h @@ -49,9 +49,9 @@ arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, static inline void arch_tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) + unsigned long start, unsigned long end, bool force) { - if (tlb->fullmm) + if (tlb->fullmm || force) flush_tlb_mm(tlb->mm); /* keep the page table cache within bounds */ diff --git a/arch/um/include/asm/tlb.h b/arch/um/include/asm/tlb.h index 2a901eca7145..344d95619d03 100644 --- a/arch/um/include/asm/tlb.h +++ b/arch/um/include/asm/tlb.h @@ -87,8 +87,13 @@ tlb_flush_mmu(struct mmu_gather *tlb) */ static inline void arch_tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) + unsigned long start, unsigned long end, bool force) { + if (force) { + tlb->start = start; + tlb->end = end; + tlb->need_flush = 1; + } tlb_flush_mmu(tlb); /* keep the page table cache within bounds */ diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h index 8f71521e7a44..faddde44de8c 100644 --- a/include/asm-generic/tlb.h +++ b/include/asm-generic/tlb.h @@ -116,7 +116,7 @@ void arch_tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end); void tlb_flush_mmu(struct mmu_gather *tlb); void arch_tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end); + unsigned long start, unsigned long end, bool force); extern bool __tlb_remove_page_size(struct mmu_gather *tlb, struct page *page, int page_size); diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index fc44315df47a..664c1e553228 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -534,6 +534,14 @@ static inline bool mm_tlb_flush_pending(struct mm_struct *mm) return atomic_read(&mm->tlb_flush_pending) > 0; } +/* + * Returns true if there are two above TLB batching threads in parallel. + */ +static inline bool mm_tlb_flush_nested(struct mm_struct *mm) +{ + return atomic_read(&mm->tlb_flush_pending) > 1; +} + static inline void init_tlb_flush_pending(struct mm_struct *mm) { atomic_set(&mm->tlb_flush_pending, 0); diff --git a/mm/memory.c b/mm/memory.c index 7848b5030be0..d7a620dd183a 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -272,10 +272,13 @@ void tlb_flush_mmu(struct mmu_gather *tlb) * that were required. */ void arch_tlb_finish_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) + unsigned long start, unsigned long end, bool force) { struct mmu_gather_batch *batch, *next; + if (force) + __tlb_adjust_range(tlb, start, end - start); + tlb_flush_mmu(tlb); /* keep the page table cache within bounds */ @@ -404,12 +407,22 @@ void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned long start, unsigned long end) { arch_tlb_gather_mmu(tlb, mm, start, end); + inc_tlb_flush_pending(tlb->mm); } void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) { - arch_tlb_finish_mmu(tlb, start, end); + /* + * If there are parallel threads are doing PTE changes on same range + * under non-exclusive lock(e.g., mmap_sem read-side) but defer TLB + * flush by batching, a thread has stable TLB entry can fail to flush + * the TLB by observing pte_none|!pte_dirty, for example so flush TLB + * forcefully if we detect parallel PTE batching threads. + */ + bool force = mm_tlb_flush_nested(tlb->mm); + + arch_tlb_finish_mmu(tlb, start, end, force); } /* -- 2.11.0 ^ permalink raw reply related [flat|nested] 35+ messages in thread
* [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-02 0:08 ` [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem Nadav Amit 2017-08-02 0:08 ` Nadav Amit @ 2017-08-08 1:19 ` kernel test robot 2017-08-08 2:28 ` Minchan Kim 2017-08-11 13:30 ` [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem Peter Zijlstra 2 siblings, 1 reply; 35+ messages in thread From: kernel test robot @ 2017-08-08 1:19 UTC (permalink / raw) Cc: linux-mm, nadav.amit, linux-kernel, akpm, Minchan Kim, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, Nadav Amit, lkp [-- Attachment #1: Type: text/plain, Size: 7495 bytes --] Greeting, FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm-migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 in testcase: will-it-scale on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory with following parameters: nr_task: 16 mode: process test: brk1 cpufreq_governor: performance test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. test-url: https://github.com/antonblanchard/will-it-scale Details are as below: --------------------------------------------------------------------------------------------------> To reproduce: git clone https://github.com/01org/lkp-tests.git cd lkp-tests bin/lkp install job.yaml # job file is attached in this email bin/lkp run job.yaml testcase/path_params/tbox_group/run: will-it-scale/16-process-brk1-performance/lkp-bdw-ep3d 378005bdbac0a2ec 76742700225cad9df49f053993 ---------------- -------------------------- %stddev change %stddev \ | \ 3405093 -19% 2747088 will-it-scale.per_process_ops 2.396e+08 8283% 2.008e+10 perf-stat.iTLB-loads 0.03 26% 0.04 ± 10% perf-stat.branch-miss-rate% 0.00 25% 0.00 ± 11% perf-stat.dTLB-store-miss-rate% 0.56 18% 0.66 perf-stat.cpi 2.859e+13 -13% 2.479e+13 perf-stat.instructions 5.906e+12 -14% 5.087e+12 perf-stat.branch-instructions 4.831e+12 -14% 4.154e+12 perf-stat.dTLB-stores 1.575e+10 ± 6% -15% 1.345e+10 perf-stat.iTLB-load-misses 1.77 -15% 1.51 perf-stat.ipc 8.476e+12 ± 5% -16% 7.079e+12 perf-stat.dTLB-loads 98.49 -59% 40.10 perf-stat.iTLB-load-miss-rate% will-it-scale.per_process_ops 3.5e+06 ++----------------------------------------------------------------+ *..*.*..*.*.. .*.*..*.*..*. .* *..*.*..*.*..*.*..*. .*. .* 3.4e+06 ++ *.*. *. : : *. *. | 3.3e+06 ++ : : | | : : | 3.2e+06 ++ :: | 3.1e+06 ++ * | | | 3e+06 ++ | 2.9e+06 ++ | | | 2.8e+06 ++ | 2.7e+06 O+ O O O O O O O O O O O O O O O O O O O O O O O O O | O | 2.6e+06 ++----------------------------------------------------------------+ perf-stat.branch-instructions 6.8e+12 ++----------------------------------------------------------------+ 6.6e+12 ++ * | | :: | 6.4e+12 ++ : : | 6.2e+12 ++ : : | | .*.*..*.*..* * | 6e+12 *+.*.*..*.*..*.*. + *..*.*..*.*..*.*..*.*..*.*..* 5.8e+12 ++ + + | 5.6e+12 ++ * | | | 5.4e+12 ++ | 5.2e+12 O+ O O O O O O O O O O O O O | | O O O O O O O O O O O 5e+12 ++ O O | 4.8e+12 ++----------------------------------------------------------------+ perf-stat.iTLB-loads 3.5e+10 ++----------------------------------------------------------------+ O O O O O | 3e+10 ++ | | O O | 2.5e+10 ++ O | | | 2e+10 ++ O O O O O O O O O O O O O O O O O O O | | 1.5e+10 ++ | | | 1e+10 ++ | | | 5e+09 ++ | | | 0 *+-*-*--*-*--*-*--*-*--*-*--*-*--*--*-*--*-*--*-*--*-*--*-*--*-*--* perf-stat.iTLB-load-miss-rate_ 100 *+-*-*--*--*-*-----*--*-*--*--*-*--*--*-*--*--*-*--*--*--*-*--*--*-*--* | *. | 90 ++ | 80 ++ | | | 70 ++ | | | 60 ++ | | | 50 ++ | 40 ++ O O O O O O | O O O O O O O O O O O O O | 30 ++ O O O | O O O O O | 20 ++--------------------------------------------------------------------+ [*] bisect-good sample [O] bisect-bad sample Disclaimer: Results have been estimated based on internal Intel analysis and are provided for informational purposes only. Any difference in system hardware or software design or configuration may affect actual performance. Thanks, Xiaolong [-- Attachment #2: config-4.13.0-rc2-00028-g767427002 --] [-- Type: text/plain, Size: 160950 bytes --] # # Automatically generated file; DO NOT EDIT. # Linux/x86_64 4.13.0-rc2 Kernel Configuration # CONFIG_64BIT=y CONFIG_X86_64=y CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_MMU=y CONFIG_ARCH_MMAP_RND_BITS_MIN=28 CONFIG_ARCH_MMAP_RND_BITS_MAX=32 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y CONFIG_ARCH_WANT_GENERAL_HUGETLB=y CONFIG_ZONE_DMA32=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_HAVE_INTEL_TXT=y CONFIG_X86_64_SMP=y CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_PGTABLE_LEVELS=4 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y CONFIG_THREAD_INFO_IN_TASK=y # # General setup # CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_HAVE_KERNEL_LZ4=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_XZ is not set # CONFIG_KERNEL_LZO is not set # CONFIG_KERNEL_LZ4 is not set CONFIG_DEFAULT_HOSTNAME="(none)" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_FHANDLE=y CONFIG_USELIB=y CONFIG_AUDIT=y CONFIG_HAVE_ARCH_AUDITSYSCALL=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_WATCH=y CONFIG_AUDIT_TREE=y # # IRQ subsystem # CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_GENERIC_IRQ_MIGRATION=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_DOMAIN_HIERARCHY=y CONFIG_GENERIC_MSI_IRQ=y CONFIG_GENERIC_MSI_IRQ_DOMAIN=y # CONFIG_IRQ_DOMAIN_DEBUG is not set CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y # CONFIG_GENERIC_IRQ_DEBUGFS is not set CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_ARCH_CLOCKSOURCE_DATA=y CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y CONFIG_GENERIC_CMOS_UPDATE=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ_COMMON=y # CONFIG_HZ_PERIODIC is not set # CONFIG_NO_HZ_IDLE is not set CONFIG_NO_HZ_FULL=y # CONFIG_NO_HZ_FULL_ALL is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y # # CPU/Task time and stats accounting # CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_VIRT_CPU_ACCOUNTING_GEN=y # CONFIG_IRQ_TIME_ACCOUNTING is not set CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_RCU_EXPERT is not set CONFIG_SRCU=y CONFIG_TREE_SRCU=y CONFIG_TASKS_RCU=y CONFIG_RCU_STALL_COMMON=y CONFIG_RCU_NEED_SEGCBLIST=y CONFIG_CONTEXT_TRACKING=y # CONFIG_CONTEXT_TRACKING_FORCE is not set CONFIG_RCU_NOCB_CPU=y CONFIG_BUILD_BIN2C=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=19 CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y CONFIG_ARCH_SUPPORTS_INT128=y CONFIG_NUMA_BALANCING=y CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y CONFIG_CGROUPS=y CONFIG_PAGE_COUNTER=y CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y CONFIG_MEMCG_SWAP_ENABLED=y CONFIG_BLK_CGROUP=y # CONFIG_DEBUG_BLK_CGROUP is not set CONFIG_CGROUP_WRITEBACK=y CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_CFS_BANDWIDTH=y CONFIG_RT_GROUP_SCHED=y CONFIG_CGROUP_PIDS=y CONFIG_CGROUP_RDMA=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_HUGETLB=y CONFIG_CPUSETS=y CONFIG_PROC_PID_CPUSET=y CONFIG_CGROUP_DEVICE=y # CONFIG_CGROUP_CPUACCT is not set CONFIG_CGROUP_PERF=y # CONFIG_CGROUP_BPF is not set # CONFIG_CGROUP_DEBUG is not set CONFIG_SOCK_CGROUP_DATA=y CONFIG_CHECKPOINT_RESTORE=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_SCHED_AUTOGROUP=y # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_RD_XZ=y CONFIG_RD_LZO=y CONFIG_RD_LZ4=y CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_HAVE_UID16=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_BPF=y CONFIG_EXPERT=y CONFIG_UID16=y CONFIG_MULTIUSER=y CONFIG_SGETMASK_SYSCALL=y CONFIG_SYSFS_SYSCALL=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_POSIX_TIMERS=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y CONFIG_KALLSYMS_BASE_RELATIVE=y CONFIG_PRINTK=y CONFIG_PRINTK_NMI=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_BPF_SYSCALL=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_ADVISE_SYSCALLS=y CONFIG_USERFAULTFD=y CONFIG_PCI_QUIRKS=y CONFIG_MEMBARRIER=y CONFIG_EMBEDDED=y CONFIG_HAVE_PERF_EVENTS=y # CONFIG_PC104 is not set # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLUB_MEMCG_SYSFS_ON is not set # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_SLAB_MERGE_DEFAULT=y # CONFIG_SLAB_FREELIST_RANDOM is not set CONFIG_SLUB_CPU_PARTIAL=y # CONFIG_SYSTEM_DATA_VERIFICATION is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y CONFIG_CRASH_CORE=y CONFIG_KEXEC_CORE=y CONFIG_OPROFILE=m CONFIG_OPROFILE_EVENT_MULTIPLEX=y CONFIG_HAVE_OPROFILE=y CONFIG_OPROFILE_NMI_TIMER=y CONFIG_KPROBES=y CONFIG_JUMP_LABEL=y # CONFIG_STATIC_KEYS_SELFTEST is not set CONFIG_OPTPROBES=y CONFIG_KPROBES_ON_FTRACE=y CONFIG_UPROBES=y # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_KRETPROBES=y CONFIG_USER_RETURN_NOTIFIER=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_HAVE_NMI=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_ARCH_HAS_FORTIFY_SOURCE=y CONFIG_ARCH_HAS_SET_MEMORY=y CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_CLK=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y CONFIG_HAVE_CMPXCHG_LOCAL=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP_FILTER=y CONFIG_HAVE_GCC_PLUGINS=y # CONFIG_GCC_PLUGINS is not set CONFIG_HAVE_CC_STACKPROTECTOR=y # CONFIG_CC_STACKPROTECTOR is not set CONFIG_CC_STACKPROTECTOR_NONE=y # CONFIG_CC_STACKPROTECTOR_REGULAR is not set # CONFIG_CC_STACKPROTECTOR_STRONG is not set CONFIG_THIN_ARCHIVES=y CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y CONFIG_HAVE_ARCH_HUGE_VMAP=y CONFIG_HAVE_ARCH_SOFT_DIRTY=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_HAVE_EXIT_THREAD=y CONFIG_ARCH_MMAP_RND_BITS=28 CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8 CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y CONFIG_HAVE_COPY_THREAD_TLS=y CONFIG_HAVE_STACK_VALIDATION=y # CONFIG_HAVE_ARCH_HASH is not set # CONFIG_ISA_BUS_API is not set CONFIG_OLD_SIGSUSPEND3=y CONFIG_COMPAT_OLD_SIGACTION=y # CONFIG_CPU_NO_EFFICIENT_FFS is not set CONFIG_HAVE_ARCH_VMAP_STACK=y CONFIG_VMAP_STACK=y # CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set # CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y CONFIG_STRICT_KERNEL_RWX=y CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y CONFIG_STRICT_MODULE_RWX=y # CONFIG_REFCOUNT_FULL is not set # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SIG is not set # CONFIG_MODULE_COMPRESS is not set # CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y CONFIG_BLK_SCSI_REQUEST=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_BLK_DEV_ZONED is not set CONFIG_BLK_DEV_THROTTLING=y # CONFIG_BLK_DEV_THROTTLING_LOW is not set # CONFIG_BLK_CMDLINE_PARSER is not set # CONFIG_BLK_WBT is not set CONFIG_BLK_DEBUG_FS=y # CONFIG_BLK_SED_OPAL is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_AIX_PARTITION is not set CONFIG_OSF_PARTITION=y CONFIG_AMIGA_PARTITION=y # CONFIG_ATARI_PARTITION is not set CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y # CONFIG_LDM_PARTITION is not set CONFIG_SGI_PARTITION=y # CONFIG_ULTRIX_PARTITION is not set CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_CMDLINE_PARTITION is not set CONFIG_BLOCK_COMPAT=y CONFIG_BLK_MQ_PCI=y CONFIG_BLK_MQ_VIRTIO=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_CFQ_GROUP_IOSCHED=y CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_MQ_IOSCHED_DEADLINE=y CONFIG_MQ_IOSCHED_KYBER=y # CONFIG_IOSCHED_BFQ is not set CONFIG_PREEMPT_NOTIFIERS=y CONFIG_PADATA=y CONFIG_ASN1=y CONFIG_INLINE_SPIN_UNLOCK_IRQ=y CONFIG_INLINE_READ_UNLOCK=y CONFIG_INLINE_READ_UNLOCK_IRQ=y CONFIG_INLINE_WRITE_UNLOCK=y CONFIG_INLINE_WRITE_UNLOCK_IRQ=y CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_RWSEM_SPIN_ON_OWNER=y CONFIG_LOCK_SPIN_ON_OWNER=y CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y CONFIG_QUEUED_SPINLOCKS=y CONFIG_ARCH_USE_QUEUED_RWLOCKS=y CONFIG_QUEUED_RWLOCKS=y CONFIG_FREEZER=y # # Processor type and features # CONFIG_ZONE_DMA=y CONFIG_SMP=y CONFIG_X86_FEATURE_NAMES=y CONFIG_X86_FAST_FEATURE_TESTS=y CONFIG_X86_X2APIC=y CONFIG_X86_MPPARSE=y # CONFIG_GOLDFISH is not set CONFIG_INTEL_RDT_A=y CONFIG_X86_EXTENDED_PLATFORM=y # CONFIG_X86_NUMACHIP is not set # CONFIG_X86_VSMP is not set CONFIG_X86_UV=y # CONFIG_X86_GOLDFISH is not set # CONFIG_X86_INTEL_MID is not set CONFIG_X86_INTEL_LPSS=y # CONFIG_X86_AMD_PLATFORM_DEVICE is not set CONFIG_IOSF_MBI=y # CONFIG_IOSF_MBI_DEBUG is not set CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y # CONFIG_SCHED_OMIT_FRAME_POINTER is not set CONFIG_HYPERVISOR_GUEST=y CONFIG_PARAVIRT=y # CONFIG_PARAVIRT_DEBUG is not set CONFIG_PARAVIRT_SPINLOCKS=y # CONFIG_QUEUED_LOCK_STAT is not set CONFIG_XEN=y CONFIG_XEN_PV=y CONFIG_XEN_PV_SMP=y CONFIG_XEN_DOM0=y CONFIG_XEN_PVHVM=y CONFIG_XEN_PVHVM_SMP=y CONFIG_XEN_512GB=y CONFIG_XEN_SAVE_RESTORE=y # CONFIG_XEN_DEBUG_FS is not set # CONFIG_XEN_PVH is not set CONFIG_KVM_GUEST=y # CONFIG_KVM_DEBUG_FS is not set CONFIG_PARAVIRT_TIME_ACCOUNTING=y CONFIG_PARAVIRT_CLOCK=y CONFIG_NO_BOOTMEM=y # CONFIG_MK8 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_MATOM is not set CONFIG_GENERIC_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y # CONFIG_PROCESSOR_SELECT is not set CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y CONFIG_MAXSMP=y CONFIG_NR_CPUS=8192 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y CONFIG_SCHED_MC_PRIO=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_PREEMPT_COUNT=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y CONFIG_X86_MCELOG_LEGACY=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y CONFIG_X86_MCE_THRESHOLD=y CONFIG_X86_MCE_INJECT=m CONFIG_X86_THERMAL_VECTOR=y # # Performance monitoring # CONFIG_PERF_EVENTS_INTEL_UNCORE=y CONFIG_PERF_EVENTS_INTEL_RAPL=y CONFIG_PERF_EVENTS_INTEL_CSTATE=y # CONFIG_PERF_EVENTS_AMD_POWER is not set # CONFIG_VM86 is not set CONFIG_X86_16BIT=y CONFIG_X86_ESPFIX64=y CONFIG_X86_VSYSCALL_EMULATION=y CONFIG_I8K=m CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y CONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_X86_DIRECT_GBPAGES=y CONFIG_NUMA=y CONFIG_AMD_NUMA=y CONFIG_X86_64_ACPI_NUMA=y CONFIG_NODES_SPAN_OTHER_NODES=y # CONFIG_NUMA_EMU is not set CONFIG_NODES_SHIFT=10 CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_HAVE_MEMBLOCK=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_HAVE_GENERIC_GUP=y CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_MEMORY_ISOLATION=y CONFIG_HAVE_BOOTMEM_INFO_NODE=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y # CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set CONFIG_MEMORY_HOTREMOVE=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y CONFIG_MEMORY_BALLOON=y CONFIG_BALLOON_COMPACTION=y CONFIG_COMPACTION=y CONFIG_MIGRATION=y CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_MMU_NOTIFIER=y CONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y CONFIG_MEMORY_FAILURE=y CONFIG_HWPOISON_INJECT=m CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y # CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set CONFIG_ARCH_WANTS_THP_SWAP=y CONFIG_THP_SWAP=y CONFIG_TRANSPARENT_HUGE_PAGECACHE=y CONFIG_CLEANCACHE=y CONFIG_FRONTSWAP=y CONFIG_CMA=y # CONFIG_CMA_DEBUG is not set # CONFIG_CMA_DEBUGFS is not set CONFIG_CMA_AREAS=7 # CONFIG_MEM_SOFT_DIRTY is not set CONFIG_ZSWAP=y CONFIG_ZPOOL=y CONFIG_ZBUD=y # CONFIG_Z3FOLD is not set CONFIG_ZSMALLOC=y # CONFIG_PGTABLE_MAPPING is not set # CONFIG_ZSMALLOC_STAT is not set CONFIG_GENERIC_EARLY_IOREMAP=y CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y # CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set # CONFIG_IDLE_PAGE_TRACKING is not set CONFIG_ARCH_HAS_ZONE_DEVICE=y CONFIG_ZONE_DEVICE=y CONFIG_FRAME_VECTOR=y CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y CONFIG_ARCH_HAS_PKEYS=y # CONFIG_PERCPU_STATS is not set CONFIG_X86_PMEM_LEGACY_DEVICE=y CONFIG_X86_PMEM_LEGACY=m CONFIG_X86_CHECK_BIOS_CORRUPTION=y # CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW=64 CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=y CONFIG_X86_SMAP=y # CONFIG_X86_INTEL_MPX is not set CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y CONFIG_EFI=y CONFIG_EFI_STUB=y # CONFIG_EFI_MIXED is not set CONFIG_SECCOMP=y # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y # CONFIG_KEXEC_FILE is not set CONFIG_CRASH_DUMP=y CONFIG_KEXEC_JUMP=y CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y # CONFIG_RANDOMIZE_BASE is not set CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y CONFIG_BOOTPARAM_HOTPLUG_CPU0=y # CONFIG_DEBUG_HOTPLUG_CPU0 is not set # CONFIG_COMPAT_VDSO is not set # CONFIG_LEGACY_VSYSCALL_NATIVE is not set CONFIG_LEGACY_VSYSCALL_EMULATE=y # CONFIG_LEGACY_VSYSCALL_NONE is not set # CONFIG_CMDLINE_BOOL is not set CONFIG_MODIFY_LDT_SYSCALL=y CONFIG_HAVE_LIVEPATCH=y # CONFIG_LIVEPATCH is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_USE_PERCPU_NUMA_NODE_ID=y # # Power management and ACPI options # CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_SUSPEND_SKIP_SYNC is not set CONFIG_HIBERNATE_CALLBACKS=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_PM_SLEEP=y CONFIG_PM_SLEEP_SMP=y # CONFIG_PM_AUTOSLEEP is not set # CONFIG_PM_WAKELOCKS is not set CONFIG_PM=y CONFIG_PM_DEBUG=y CONFIG_PM_ADVANCED_DEBUG=y CONFIG_PM_TEST_SUSPEND=y CONFIG_PM_SLEEP_DEBUG=y # CONFIG_DPM_WATCHDOG is not set # CONFIG_PM_TRACE_RTC is not set CONFIG_PM_CLK=y # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set CONFIG_ACPI=y CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y # CONFIG_ACPI_DEBUGGER is not set CONFIG_ACPI_SLEEP=y # CONFIG_ACPI_PROCFS_POWER is not set CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y CONFIG_ACPI_EC_DEBUGFS=m CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=y CONFIG_ACPI_DOCK=y CONFIG_ACPI_CPU_FREQ_PSS=y CONFIG_ACPI_PROCESSOR_CSTATE=y CONFIG_ACPI_PROCESSOR_IDLE=y CONFIG_ACPI_CPPC_LIB=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_IPMI=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_PROCESSOR_AGGREGATOR=m CONFIG_ACPI_THERMAL=y CONFIG_ACPI_NUMA=y # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y CONFIG_ACPI_TABLE_UPGRADE=y CONFIG_ACPI_DEBUG=y CONFIG_ACPI_PCI_SLOT=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y CONFIG_ACPI_HOTPLUG_MEMORY=y CONFIG_ACPI_HOTPLUG_IOAPIC=y CONFIG_ACPI_SBS=m CONFIG_ACPI_HED=y CONFIG_ACPI_CUSTOM_METHOD=m CONFIG_ACPI_BGRT=y # CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set CONFIG_ACPI_NFIT=m CONFIG_HAVE_ACPI_APEI=y CONFIG_HAVE_ACPI_APEI_NMI=y CONFIG_ACPI_APEI=y CONFIG_ACPI_APEI_GHES=y CONFIG_ACPI_APEI_PCIEAER=y CONFIG_ACPI_APEI_MEMORY_FAILURE=y CONFIG_ACPI_APEI_EINJ=m CONFIG_ACPI_APEI_ERST_DEBUG=y # CONFIG_DPTF_POWER is not set CONFIG_ACPI_EXTLOG=m # CONFIG_PMIC_OPREGION is not set # CONFIG_ACPI_CONFIGFS is not set CONFIG_SFI=y # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_ATTR_SET=y CONFIG_CPU_FREQ_GOV_COMMON=y # CONFIG_CPU_FREQ_STAT is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set # # CPU frequency scaling drivers # CONFIG_X86_INTEL_PSTATE=y CONFIG_X86_PCC_CPUFREQ=m CONFIG_X86_ACPI_CPUFREQ=m CONFIG_X86_ACPI_CPUFREQ_CPB=y CONFIG_X86_POWERNOW_K8=m CONFIG_X86_AMD_FREQ_SENSITIVITY=m # CONFIG_X86_SPEEDSTEP_CENTRINO is not set CONFIG_X86_P4_CLOCKMOD=m # # shared options # CONFIG_X86_SPEEDSTEP_LIB=m # # CPU Idle # CONFIG_CPU_IDLE=y # CONFIG_CPU_IDLE_GOV_LADDER is not set CONFIG_CPU_IDLE_GOV_MENU=y # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set CONFIG_INTEL_IDLE=y # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_XEN=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_CNB20LE_QUIRK is not set CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=y CONFIG_PCIEAER=y CONFIG_PCIE_ECRC=y CONFIG_PCIEAER_INJECT=m CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM_DEFAULT=y # CONFIG_PCIEASPM_POWERSAVE is not set # CONFIG_PCIEASPM_POWER_SUPERSAVE is not set # CONFIG_PCIEASPM_PERFORMANCE is not set CONFIG_PCIE_PME=y # CONFIG_PCIE_DPC is not set # CONFIG_PCIE_PTM is not set CONFIG_PCI_BUS_ADDR_T_64BIT=y CONFIG_PCI_MSI=y CONFIG_PCI_MSI_IRQ_DOMAIN=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_REALLOC_ENABLE_AUTO is not set CONFIG_PCI_STUB=y # CONFIG_XEN_PCIDEV_FRONTEND is not set CONFIG_HT_IRQ=y CONFIG_PCI_ATS=y CONFIG_PCI_LOCKLESS_CONFIG=y CONFIG_PCI_IOV=y CONFIG_PCI_PRI=y CONFIG_PCI_PASID=y CONFIG_PCI_LABEL=y # CONFIG_PCI_HYPERV is not set CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_ACPI=y CONFIG_HOTPLUG_PCI_ACPI_IBM=m # CONFIG_HOTPLUG_PCI_CPCI is not set CONFIG_HOTPLUG_PCI_SHPC=m # # DesignWare PCI Core Support # # CONFIG_PCIE_DW_PLAT is not set # # PCI host controller drivers # # CONFIG_VMD is not set # # PCI Endpoint # # CONFIG_PCI_ENDPOINT is not set # # PCI switch controller drivers # # CONFIG_PCI_SW_SWITCHTEC is not set # CONFIG_ISA_BUS is not set CONFIG_ISA_DMA_API=y CONFIG_AMD_NB=y CONFIG_PCCARD=y # CONFIG_PCMCIA is not set CONFIG_CARDBUS=y # # PC-card bridges # CONFIG_YENTA=m CONFIG_YENTA_O2=y CONFIG_YENTA_RICOH=y CONFIG_YENTA_TI=y CONFIG_YENTA_ENE_TUNE=y CONFIG_YENTA_TOSHIBA=y # CONFIG_RAPIDIO is not set # CONFIG_X86_SYSFB is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y CONFIG_ELFCORE=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_BINFMT_SCRIPT=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_COREDUMP=y CONFIG_IA32_EMULATION=y # CONFIG_IA32_AOUT is not set # CONFIG_X86_X32 is not set CONFIG_COMPAT_32=y CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_X86_DEV_DMA_OPS=y CONFIG_NET=y CONFIG_COMPAT_NETLINK_MESSAGES=y CONFIG_NET_INGRESS=y CONFIG_NET_EGRESS=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_DIAG=m CONFIG_UNIX=y CONFIG_UNIX_DIAG=m # CONFIG_TLS is not set CONFIG_XFRM=y CONFIG_XFRM_ALGO=y CONFIG_XFRM_USER=y CONFIG_XFRM_SUB_POLICY=y CONFIG_XFRM_MIGRATE=y CONFIG_XFRM_STATISTICS=y CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_IP_FIB_TRIE_STATS=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_ROUTE_CLASSID=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y # CONFIG_IP_PNP_BOOTP is not set # CONFIG_IP_PNP_RARP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IP_TUNNEL=m CONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_MROUTE_MULTIPLE_TABLES=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y CONFIG_SYN_COOKIES=y CONFIG_NET_IPVTI=m CONFIG_NET_UDP_TUNNEL=m # CONFIG_NET_FOU is not set # CONFIG_NET_FOU_IP_TUNNELS is not set CONFIG_INET_AH=m CONFIG_INET_ESP=m # CONFIG_INET_ESP_OFFLOAD is not set CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m CONFIG_INET_UDP_DIAG=m # CONFIG_INET_RAW_DIAG is not set # CONFIG_INET_DIAG_DESTROY is not set CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m CONFIG_TCP_CONG_HSTCP=m CONFIG_TCP_CONG_HYBLA=m CONFIG_TCP_CONG_VEGAS=m # CONFIG_TCP_CONG_NV is not set CONFIG_TCP_CONG_SCALABLE=m CONFIG_TCP_CONG_LP=m CONFIG_TCP_CONG_VENO=m CONFIG_TCP_CONG_YEAH=m CONFIG_TCP_CONG_ILLINOIS=m # CONFIG_TCP_CONG_DCTCP is not set # CONFIG_TCP_CONG_CDG is not set # CONFIG_TCP_CONG_BBR is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y CONFIG_IPV6=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y CONFIG_IPV6_OPTIMISTIC_DAD=y CONFIG_INET6_AH=m CONFIG_INET6_ESP=m # CONFIG_INET6_ESP_OFFLOAD is not set CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m # CONFIG_IPV6_ILA is not set CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m # CONFIG_IPV6_VTI is not set CONFIG_IPV6_SIT=m CONFIG_IPV6_SIT_6RD=y CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_GRE is not set # CONFIG_IPV6_FOU is not set # CONFIG_IPV6_FOU_TUNNEL is not set CONFIG_IPV6_MULTIPLE_TABLES=y # CONFIG_IPV6_SUBTREES is not set CONFIG_IPV6_MROUTE=y CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y CONFIG_IPV6_PIMSM_V2=y # CONFIG_IPV6_SEG6_LWTUNNEL is not set # CONFIG_IPV6_SEG6_HMAC is not set CONFIG_NETLABEL=y CONFIG_NETWORK_SECMARK=y CONFIG_NET_PTP_CLASSIFY=y CONFIG_NETWORK_PHY_TIMESTAMPING=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y CONFIG_BRIDGE_NETFILTER=m # # Core Netfilter Configuration # CONFIG_NETFILTER_INGRESS=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_ACCT=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK=m CONFIG_NF_LOG_COMMON=m # CONFIG_NF_LOG_NETDEV is not set CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_ZONES=y CONFIG_NF_CONNTRACK_PROCFS=y CONFIG_NF_CONNTRACK_EVENTS=y # CONFIG_NF_CONNTRACK_TIMEOUT is not set CONFIG_NF_CONNTRACK_TIMESTAMP=y CONFIG_NF_CONNTRACK_LABELS=y CONFIG_NF_CT_PROTO_DCCP=y CONFIG_NF_CT_PROTO_GRE=m CONFIG_NF_CT_PROTO_SCTP=y CONFIG_NF_CT_PROTO_UDPLITE=y CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m CONFIG_NF_CONNTRACK_BROADCAST=m CONFIG_NF_CONNTRACK_NETBIOS_NS=m CONFIG_NF_CONNTRACK_SNMP=m CONFIG_NF_CONNTRACK_PPTP=m CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m # CONFIG_NF_CT_NETLINK_TIMEOUT is not set # CONFIG_NETFILTER_NETLINK_GLUE_CT is not set CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_NF_NAT_PROTO_DCCP=y CONFIG_NF_NAT_PROTO_UDPLITE=y CONFIG_NF_NAT_PROTO_SCTP=y CONFIG_NF_NAT_AMANDA=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_SIP=m CONFIG_NF_NAT_TFTP=m CONFIG_NF_NAT_REDIRECT=m CONFIG_NETFILTER_SYNPROXY=m CONFIG_NF_TABLES=m # CONFIG_NF_TABLES_INET is not set # CONFIG_NF_TABLES_NETDEV is not set CONFIG_NFT_EXTHDR=m CONFIG_NFT_META=m # CONFIG_NFT_RT is not set # CONFIG_NFT_NUMGEN is not set CONFIG_NFT_CT=m # CONFIG_NFT_SET_RBTREE is not set # CONFIG_NFT_SET_HASH is not set # CONFIG_NFT_SET_BITMAP is not set CONFIG_NFT_COUNTER=m CONFIG_NFT_LOG=m CONFIG_NFT_LIMIT=m # CONFIG_NFT_MASQ is not set # CONFIG_NFT_REDIR is not set CONFIG_NFT_NAT=m # CONFIG_NFT_OBJREF is not set # CONFIG_NFT_QUEUE is not set # CONFIG_NFT_QUOTA is not set # CONFIG_NFT_REJECT is not set CONFIG_NFT_COMPAT=m CONFIG_NFT_HASH=m CONFIG_NETFILTER_XTABLES=y # # Xtables combined modules # CONFIG_NETFILTER_XT_MARK=m CONFIG_NETFILTER_XT_CONNMARK=m CONFIG_NETFILTER_XT_SET=m # # Xtables targets # CONFIG_NETFILTER_XT_TARGET_AUDIT=m CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m CONFIG_NETFILTER_XT_TARGET_CT=m CONFIG_NETFILTER_XT_TARGET_DSCP=m CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_HMARK=m CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m CONFIG_NETFILTER_XT_TARGET_LED=m CONFIG_NETFILTER_XT_TARGET_LOG=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_NAT=m CONFIG_NETFILTER_XT_TARGET_NETMAP=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_REDIRECT=m CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m CONFIG_NETFILTER_XT_TARGET_SECMARK=m CONFIG_NETFILTER_XT_TARGET_TCPMSS=m CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m # # Xtables matches # CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m CONFIG_NETFILTER_XT_MATCH_BPF=m # CONFIG_NETFILTER_XT_MATCH_CGROUP is not set CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_CPU=m CONFIG_NETFILTER_XT_MATCH_DCCP=m CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m CONFIG_NETFILTER_XT_MATCH_DSCP=m CONFIG_NETFILTER_XT_MATCH_ECN=m CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m CONFIG_NETFILTER_XT_MATCH_HELPER=m CONFIG_NETFILTER_XT_MATCH_HL=m # CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set CONFIG_NETFILTER_XT_MATCH_IPRANGE=m CONFIG_NETFILTER_XT_MATCH_IPVS=m CONFIG_NETFILTER_XT_MATCH_L2TP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_NFACCT=m CONFIG_NETFILTER_XT_MATCH_OSF=m CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_RECENT=m CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m CONFIG_IP_SET=m CONFIG_IP_SET_MAX=256 CONFIG_IP_SET_BITMAP_IP=m CONFIG_IP_SET_BITMAP_IPMAC=m CONFIG_IP_SET_BITMAP_PORT=m CONFIG_IP_SET_HASH_IP=m # CONFIG_IP_SET_HASH_IPMARK is not set CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m # CONFIG_IP_SET_HASH_IPMAC is not set # CONFIG_IP_SET_HASH_MAC is not set # CONFIG_IP_SET_HASH_NETPORTNET is not set CONFIG_IP_SET_HASH_NET=m # CONFIG_IP_SET_HASH_NETNET is not set CONFIG_IP_SET_HASH_NETPORT=m CONFIG_IP_SET_HASH_NETIFACE=m CONFIG_IP_SET_LIST_SET=m CONFIG_IP_VS=m CONFIG_IP_VS_IPV6=y # CONFIG_IP_VS_DEBUG is not set CONFIG_IP_VS_TAB_BITS=12 # # IPVS transport protocol load balancing support # CONFIG_IP_VS_PROTO_TCP=y CONFIG_IP_VS_PROTO_UDP=y CONFIG_IP_VS_PROTO_AH_ESP=y CONFIG_IP_VS_PROTO_ESP=y CONFIG_IP_VS_PROTO_AH=y CONFIG_IP_VS_PROTO_SCTP=y # # IPVS scheduler # CONFIG_IP_VS_RR=m CONFIG_IP_VS_WRR=m CONFIG_IP_VS_LC=m CONFIG_IP_VS_WLC=m # CONFIG_IP_VS_FO is not set # CONFIG_IP_VS_OVF is not set CONFIG_IP_VS_LBLC=m CONFIG_IP_VS_LBLCR=m CONFIG_IP_VS_DH=m CONFIG_IP_VS_SH=m CONFIG_IP_VS_SED=m CONFIG_IP_VS_NQ=m # # IPVS SH scheduler # CONFIG_IP_VS_SH_TAB_BITS=8 # # IPVS application helper # CONFIG_IP_VS_FTP=m CONFIG_IP_VS_NFCT=y CONFIG_IP_VS_PE_SIP=m # # IP: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV4=m CONFIG_NF_CONNTRACK_IPV4=m # CONFIG_NF_SOCKET_IPV4 is not set CONFIG_NF_TABLES_IPV4=m CONFIG_NFT_CHAIN_ROUTE_IPV4=m # CONFIG_NFT_REJECT_IPV4 is not set # CONFIG_NFT_DUP_IPV4 is not set # CONFIG_NFT_FIB_IPV4 is not set # CONFIG_NF_TABLES_ARP is not set CONFIG_NF_DUP_IPV4=m # CONFIG_NF_LOG_ARP is not set CONFIG_NF_LOG_IPV4=m CONFIG_NF_REJECT_IPV4=m CONFIG_NF_NAT_IPV4=m CONFIG_NFT_CHAIN_NAT_IPV4=m CONFIG_NF_NAT_MASQUERADE_IPV4=m CONFIG_NF_NAT_SNMP_BASIC=m CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_SYNPROXY=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_NETMAP=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_SECURITY=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # # IPv6: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV6=m CONFIG_NF_CONNTRACK_IPV6=m # CONFIG_NF_SOCKET_IPV6 is not set CONFIG_NF_TABLES_IPV6=m CONFIG_NFT_CHAIN_ROUTE_IPV6=m # CONFIG_NFT_REJECT_IPV6 is not set # CONFIG_NFT_DUP_IPV6 is not set # CONFIG_NFT_FIB_IPV6 is not set CONFIG_NF_DUP_IPV6=m CONFIG_NF_REJECT_IPV6=m CONFIG_NF_LOG_IPV6=m CONFIG_NF_NAT_IPV6=m CONFIG_NFT_CHAIN_NAT_IPV6=m # CONFIG_NF_NAT_MASQUERADE_IPV6 is not set CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_TARGET_SYNPROXY=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m CONFIG_IP6_NF_SECURITY=m # CONFIG_IP6_NF_NAT is not set CONFIG_NF_TABLES_BRIDGE=m # CONFIG_NFT_BRIDGE_META is not set # CONFIG_NF_LOG_BRIDGE is not set CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m CONFIG_BRIDGE_EBT_T_NAT=m CONFIG_BRIDGE_EBT_802_3=m CONFIG_BRIDGE_EBT_AMONG=m CONFIG_BRIDGE_EBT_ARP=m CONFIG_BRIDGE_EBT_IP=m CONFIG_BRIDGE_EBT_IP6=m CONFIG_BRIDGE_EBT_LIMIT=m CONFIG_BRIDGE_EBT_MARK=m CONFIG_BRIDGE_EBT_PKTTYPE=m CONFIG_BRIDGE_EBT_STP=m CONFIG_BRIDGE_EBT_VLAN=m CONFIG_BRIDGE_EBT_ARPREPLY=m CONFIG_BRIDGE_EBT_DNAT=m CONFIG_BRIDGE_EBT_MARK_T=m CONFIG_BRIDGE_EBT_REDIRECT=m CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_LOG=m CONFIG_BRIDGE_EBT_NFLOG=m CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m # # DCCP CCIDs Configuration # # CONFIG_IP_DCCP_CCID2_DEBUG is not set CONFIG_IP_DCCP_CCID3=y # CONFIG_IP_DCCP_CCID3_DEBUG is not set CONFIG_IP_DCCP_TFRC_LIB=y # # DCCP Kernel Hacking # # CONFIG_IP_DCCP_DEBUG is not set # CONFIG_NET_DCCPPROBE is not set CONFIG_IP_SCTP=m CONFIG_NET_SCTPPROBE=m # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set CONFIG_SCTP_COOKIE_HMAC_MD5=y CONFIG_SCTP_COOKIE_HMAC_SHA1=y CONFIG_INET_SCTP_DIAG=m # CONFIG_RDS is not set CONFIG_TIPC=m CONFIG_TIPC_MEDIA_UDP=y CONFIG_ATM=m CONFIG_ATM_CLIP=m # CONFIG_ATM_CLIP_NO_ICMP is not set CONFIG_ATM_LANE=m # CONFIG_ATM_MPOA is not set CONFIG_ATM_BR2684=m # CONFIG_ATM_BR2684_IPFILTER is not set CONFIG_L2TP=m CONFIG_L2TP_DEBUGFS=m CONFIG_L2TP_V3=y CONFIG_L2TP_IP=m CONFIG_L2TP_ETH=m CONFIG_STP=m CONFIG_GARP=m CONFIG_MRP=m CONFIG_BRIDGE=m CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_BRIDGE_VLAN_FILTERING=y CONFIG_HAVE_NET_DSA=y # CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y CONFIG_VLAN_8021Q_MVRP=y # CONFIG_DECNET is not set CONFIG_LLC=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_PHONET is not set # CONFIG_6LOWPAN is not set CONFIG_IEEE802154=m # CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set CONFIG_IEEE802154_SOCKET=m CONFIG_MAC802154=m CONFIG_NET_SCHED=y # # Queueing/Scheduling # CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_ATM=m CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_MULTIQ=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFB=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_DRR=m CONFIG_NET_SCH_MQPRIO=m CONFIG_NET_SCH_CHOKE=m CONFIG_NET_SCH_QFQ=m CONFIG_NET_SCH_CODEL=m CONFIG_NET_SCH_FQ_CODEL=m # CONFIG_NET_SCH_FQ is not set # CONFIG_NET_SCH_HHF is not set # CONFIG_NET_SCH_PIE is not set CONFIG_NET_SCH_INGRESS=m CONFIG_NET_SCH_PLUG=m # CONFIG_NET_SCH_DEFAULT is not set # # Classification # CONFIG_NET_CLS=y CONFIG_NET_CLS_BASIC=m CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m CONFIG_NET_CLS_FLOW=m CONFIG_NET_CLS_CGROUP=y CONFIG_NET_CLS_BPF=m # CONFIG_NET_CLS_FLOWER is not set # CONFIG_NET_CLS_MATCHALL is not set CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 CONFIG_NET_EMATCH_CMP=m CONFIG_NET_EMATCH_NBYTE=m CONFIG_NET_EMATCH_U32=m CONFIG_NET_EMATCH_META=m CONFIG_NET_EMATCH_TEXT=m CONFIG_NET_EMATCH_IPSET=m CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=m CONFIG_NET_ACT_GACT=m CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=m # CONFIG_NET_ACT_SAMPLE is not set CONFIG_NET_ACT_IPT=m CONFIG_NET_ACT_NAT=m CONFIG_NET_ACT_PEDIT=m CONFIG_NET_ACT_SIMP=m CONFIG_NET_ACT_SKBEDIT=m CONFIG_NET_ACT_CSUM=m # CONFIG_NET_ACT_VLAN is not set # CONFIG_NET_ACT_BPF is not set # CONFIG_NET_ACT_CONNMARK is not set # CONFIG_NET_ACT_SKBMOD is not set # CONFIG_NET_ACT_IFE is not set # CONFIG_NET_ACT_TUNNEL_KEY is not set CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y CONFIG_DCB=y CONFIG_DNS_RESOLVER=m # CONFIG_BATMAN_ADV is not set CONFIG_OPENVSWITCH=m CONFIG_OPENVSWITCH_GRE=m CONFIG_OPENVSWITCH_VXLAN=m CONFIG_VSOCKETS=m CONFIG_VMWARE_VMCI_VSOCKETS=m # CONFIG_VIRTIO_VSOCKETS is not set CONFIG_NETLINK_DIAG=m CONFIG_MPLS=y CONFIG_NET_MPLS_GSO=m # CONFIG_MPLS_ROUTING is not set # CONFIG_HSR is not set # CONFIG_NET_SWITCHDEV is not set # CONFIG_NET_L3_MASTER_DEV is not set # CONFIG_NET_NCSI is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y # CONFIG_CGROUP_NET_PRIO is not set CONFIG_CGROUP_NET_CLASSID=y CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y CONFIG_BPF_JIT=y CONFIG_NET_FLOW_LIMIT=y # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set CONFIG_NET_DROP_MONITOR=y # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_AF_KCM is not set # CONFIG_STREAM_PARSER is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y CONFIG_WEXT_CORE=y CONFIG_WEXT_PROC=y CONFIG_WEXT_PRIV=y CONFIG_CFG80211=m # CONFIG_NL80211_TESTMODE is not set # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_CERTIFICATION_ONUS is not set CONFIG_CFG80211_DEFAULT_PS=y # CONFIG_CFG80211_DEBUGFS is not set # CONFIG_CFG80211_INTERNAL_REGDB is not set CONFIG_CFG80211_CRDA_SUPPORT=y CONFIG_CFG80211_WEXT=y CONFIG_LIB80211=m # CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=m CONFIG_MAC80211_HAS_RC=y CONFIG_MAC80211_RC_MINSTREL=y CONFIG_MAC80211_RC_MINSTREL_HT=y # CONFIG_MAC80211_RC_MINSTREL_VHT is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y CONFIG_MAC80211_DEBUGFS=y # CONFIG_MAC80211_MESSAGE_TRACING is not set # CONFIG_MAC80211_DEBUG_MENU is not set CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 # CONFIG_WIMAX is not set CONFIG_RFKILL=m CONFIG_RFKILL_LEDS=y CONFIG_RFKILL_INPUT=y # CONFIG_RFKILL_GPIO is not set CONFIG_NET_9P=y CONFIG_NET_9P_VIRTIO=y # CONFIG_NET_9P_XEN is not set # CONFIG_NET_9P_DEBUG is not set # CONFIG_CAIF is not set # CONFIG_CEPH_LIB is not set # CONFIG_NFC is not set # CONFIG_PSAMPLE is not set # CONFIG_NET_IFE is not set # CONFIG_LWTUNNEL is not set CONFIG_DST_CACHE=y CONFIG_GRO_CELLS=y # CONFIG_NET_DEVLINK is not set CONFIG_MAY_USE_DEVLINK=y CONFIG_HAVE_EBPF_JIT=y # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER=y CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y CONFIG_ALLOW_DEV_COREDUMP=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set # CONFIG_TEST_ASYNC_DRIVER_PROBE is not set CONFIG_SYS_HYPERVISOR=y # CONFIG_GENERIC_CPU_DEVICES is not set CONFIG_GENERIC_CPU_AUTOPROBE=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_SPI=y CONFIG_DMA_SHARED_BUFFER=y # CONFIG_DMA_FENCE_TRACE is not set CONFIG_DMA_CMA=y # # Default contiguous memory area size: # CONFIG_CMA_SIZE_MBYTES=200 CONFIG_CMA_SIZE_SEL_MBYTES=y # CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set # CONFIG_CMA_SIZE_SEL_MIN is not set # CONFIG_CMA_SIZE_SEL_MAX is not set CONFIG_CMA_ALIGNMENT=8 # # Bus devices # CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y CONFIG_MTD=m # CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set # # Partition parsers # # # User Modules And Translation Layers # CONFIG_MTD_BLKDEVS=m CONFIG_MTD_BLOCK=m # CONFIG_MTD_BLOCK_RO is not set # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set # CONFIG_SM_FTL is not set # CONFIG_MTD_OOPS is not set # CONFIG_MTD_SWAP is not set # CONFIG_MTD_PARTITIONED_MASTER is not set # # RAM/ROM/Flash chip drivers # # CONFIG_MTD_CFI is not set # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_MCHP23K256 is not set # CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers # # CONFIG_MTD_DOCG3 is not set # CONFIG_MTD_NAND is not set # CONFIG_MTD_ONENAND is not set # # LPDDR & LPDDR2 PCM memory drivers # # CONFIG_MTD_LPDDR is not set # CONFIG_MTD_SPI_NOR is not set CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 CONFIG_MTD_UBI_BEB_LIMIT=20 # CONFIG_MTD_UBI_FASTMAP is not set # CONFIG_MTD_UBI_GLUEBI is not set # CONFIG_MTD_UBI_BLOCK is not set # CONFIG_OF is not set CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y CONFIG_PARPORT=m CONFIG_PARPORT_PC=m CONFIG_PARPORT_SERIAL=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y CONFIG_PARPORT_NOT_PC=y CONFIG_PNP=y # CONFIG_PNP_DEBUG_MESSAGES is not set # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_NULL_BLK=m CONFIG_BLK_DEV_FD=m # CONFIG_PARIDE is not set CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m # CONFIG_ZRAM is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_LOOP_MIN_COUNT=0 # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SKD is not set CONFIG_BLK_DEV_SX8=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_RAM_DAX is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m CONFIG_XEN_BLKDEV_FRONTEND=m # CONFIG_XEN_BLKDEV_BACKEND is not set CONFIG_VIRTIO_BLK=y # CONFIG_VIRTIO_BLK_SCSI is not set # CONFIG_BLK_DEV_RBD is not set CONFIG_BLK_DEV_RSXX=m CONFIG_NVME_CORE=m CONFIG_BLK_DEV_NVME=m # CONFIG_NVME_FC is not set # CONFIG_NVME_TARGET is not set # # Misc devices # CONFIG_SENSORS_LIS3LV02D=m # CONFIG_AD525X_DPOT is not set # CONFIG_DUMMY_IRQ is not set # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set CONFIG_SGI_IOC4=m CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m # CONFIG_ICS932S401 is not set CONFIG_ENCLOSURE_SERVICES=m CONFIG_SGI_XP=m CONFIG_HP_ILO=m CONFIG_SGI_GRU=m # CONFIG_SGI_GRU_DEBUG is not set CONFIG_APDS9802ALS=m CONFIG_ISL29003=m CONFIG_ISL29020=m CONFIG_SENSORS_TSL2550=m CONFIG_SENSORS_BH1770=m CONFIG_SENSORS_APDS990X=m # CONFIG_HMC6352 is not set # CONFIG_DS1682 is not set # CONFIG_TI_DAC7512 is not set CONFIG_VMWARE_BALLOON=m # CONFIG_USB_SWITCH_FSA9480 is not set # CONFIG_LATTICE_ECP3_CONFIG is not set # CONFIG_SRAM is not set # CONFIG_PCI_ENDPOINT_TEST is not set # CONFIG_C2PORT is not set # # EEPROM support # CONFIG_EEPROM_AT24=m # CONFIG_EEPROM_AT25 is not set CONFIG_EEPROM_LEGACY=m CONFIG_EEPROM_MAX6875=m CONFIG_EEPROM_93CX6=m # CONFIG_EEPROM_93XX46 is not set # CONFIG_EEPROM_IDT_89HPESX is not set CONFIG_CB710_CORE=m # CONFIG_CB710_DEBUG is not set CONFIG_CB710_DEBUG_ASSUMPTIONS=y # # Texas Instruments shared transport line discipline # # CONFIG_TI_ST is not set CONFIG_SENSORS_LIS3_I2C=m # # Altera FPGA firmware download module # CONFIG_ALTERA_STAPL=m CONFIG_INTEL_MEI=y CONFIG_INTEL_MEI_ME=y # CONFIG_INTEL_MEI_TXE is not set CONFIG_VMWARE_VMCI=m # # Intel MIC Bus Driver # # CONFIG_INTEL_MIC_BUS is not set # # SCIF Bus Driver # # CONFIG_SCIF_BUS is not set # # VOP Bus Driver # # CONFIG_VOP_BUS is not set # # Intel MIC Host Driver # # # Intel MIC Card Driver # # # SCIF Driver # # # Intel MIC Coprocessor State Management (COSM) Drivers # # # VOP Driver # # CONFIG_GENWQE is not set # CONFIG_ECHO is not set # CONFIG_CXL_BASE is not set # CONFIG_CXL_AFU_DRIVER_OPS is not set # CONFIG_CXL_LIB is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_ENCLOSURE=m CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=m CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_ISCSI_BOOT_SYSFS=m CONFIG_SCSI_CXGB3_ISCSI=m CONFIG_SCSI_CXGB4_ISCSI=m CONFIG_SCSI_BNX2_ISCSI=m CONFIG_SCSI_BNX2X_FCOE=m CONFIG_BE2ISCSI=m # CONFIG_BLK_DEV_3W_XXXX_RAID is not set CONFIG_SCSI_HPSA=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_3W_SAS=m # CONFIG_SCSI_ACARD is not set CONFIG_SCSI_AACRAID=m # CONFIG_SCSI_AIC7XXX is not set CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=4 CONFIG_AIC79XX_RESET_DELAY_MS=15000 # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set # CONFIG_SCSI_AIC94XX is not set CONFIG_SCSI_MVSAS=m # CONFIG_SCSI_MVSAS_DEBUG is not set CONFIG_SCSI_MVSAS_TASKLET=y CONFIG_SCSI_MVUMI=m # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set CONFIG_SCSI_ARCMSR=m # CONFIG_SCSI_ESAS2R is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set CONFIG_MEGARAID_SAS=m CONFIG_SCSI_MPT3SAS=m CONFIG_SCSI_MPT2SAS_MAX_SGE=128 CONFIG_SCSI_MPT3SAS_MAX_SGE=128 CONFIG_SCSI_MPT2SAS=m # CONFIG_SCSI_SMARTPQI is not set CONFIG_SCSI_UFSHCD=m CONFIG_SCSI_UFSHCD_PCI=m # CONFIG_SCSI_UFS_DWC_TC_PCI is not set # CONFIG_SCSI_UFSHCD_PLATFORM is not set CONFIG_SCSI_HPTIOP=m # CONFIG_SCSI_BUSLOGIC is not set CONFIG_VMWARE_PVSCSI=m # CONFIG_XEN_SCSI_FRONTEND is not set CONFIG_HYPERV_STORAGE=m CONFIG_LIBFC=m CONFIG_LIBFCOE=m CONFIG_FCOE=m CONFIG_FCOE_FNIC=m # CONFIG_SCSI_SNIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set CONFIG_SCSI_ISCI=m # CONFIG_SCSI_IPS is not set CONFIG_SCSI_INITIO=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set CONFIG_SCSI_STEX=m # CONFIG_SCSI_SYM53C8XX_2 is not set CONFIG_SCSI_IPR=m CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA_FC=m # CONFIG_TCM_QLA2XXX is not set CONFIG_SCSI_QLA_ISCSI=m # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_WD719X is not set CONFIG_SCSI_DEBUG=m CONFIG_SCSI_PMCRAID=m CONFIG_SCSI_PM8001=m # CONFIG_SCSI_BFA_FC is not set CONFIG_SCSI_VIRTIO=m CONFIG_SCSI_CHELSIO_FCOE=m CONFIG_SCSI_DH=y CONFIG_SCSI_DH_RDAC=y CONFIG_SCSI_DH_HP_SW=y CONFIG_SCSI_DH_EMC=y CONFIG_SCSI_DH_ALUA=y CONFIG_SCSI_OSD_INITIATOR=m CONFIG_SCSI_OSD_ULD=m CONFIG_SCSI_OSD_DPRINT_SENSE=1 # CONFIG_SCSI_OSD_DEBUG is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_ACPI=y # CONFIG_SATA_ZPODD is not set CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=m CONFIG_SATA_AHCI_PLATFORM=m # CONFIG_SATA_INIC162X is not set CONFIG_SATA_ACARD_AHCI=m CONFIG_SATA_SIL24=m CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # CONFIG_PDC_ADMA=m CONFIG_SATA_QSTOR=m CONFIG_SATA_SX4=m CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # CONFIG_ATA_PIIX=m # CONFIG_SATA_DWC is not set CONFIG_SATA_MV=m CONFIG_SATA_NV=m CONFIG_SATA_PROMISE=m CONFIG_SATA_SIL=m CONFIG_SATA_SIS=m CONFIG_SATA_SVW=m CONFIG_SATA_ULI=m CONFIG_SATA_VIA=m CONFIG_SATA_VITESSE=m # # PATA SFF controllers with BMDMA # CONFIG_PATA_ALI=m CONFIG_PATA_AMD=m CONFIG_PATA_ARTOP=m CONFIG_PATA_ATIIXP=m CONFIG_PATA_ATP867X=m CONFIG_PATA_CMD64X=m # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set CONFIG_PATA_HPT366=m CONFIG_PATA_HPT37X=m CONFIG_PATA_HPT3X2N=m CONFIG_PATA_HPT3X3=m # CONFIG_PATA_HPT3X3_DMA is not set CONFIG_PATA_IT8213=m CONFIG_PATA_IT821X=m CONFIG_PATA_JMICRON=m CONFIG_PATA_MARVELL=m CONFIG_PATA_NETCELL=m CONFIG_PATA_NINJA32=m # CONFIG_PATA_NS87415 is not set CONFIG_PATA_OLDPIIX=m # CONFIG_PATA_OPTIDMA is not set CONFIG_PATA_PDC2027X=m CONFIG_PATA_PDC_OLD=m # CONFIG_PATA_RADISYS is not set CONFIG_PATA_RDC=m CONFIG_PATA_SCH=m CONFIG_PATA_SERVERWORKS=m CONFIG_PATA_SIL680=m CONFIG_PATA_SIS=m CONFIG_PATA_TOSHIBA=m # CONFIG_PATA_TRIFLEX is not set CONFIG_PATA_VIA=m # CONFIG_PATA_WINBOND is not set # # PIO-only SFF controllers # # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_PLATFORM is not set # CONFIG_PATA_RZ1000 is not set # # Generic fallback / legacy drivers # CONFIG_PATA_ACPI=m CONFIG_ATA_GENERIC=m # CONFIG_PATA_LEGACY is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID456=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m # CONFIG_MD_CLUSTER is not set # CONFIG_BCACHE is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=m # CONFIG_DM_MQ_DEFAULT is not set CONFIG_DM_DEBUG=y CONFIG_DM_BUFIO=m # CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set CONFIG_DM_BIO_PRISON=m CONFIG_DM_PERSISTENT_DATA=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m CONFIG_DM_CACHE_SMQ=m # CONFIG_DM_ERA is not set CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_RAID=m CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_QL=m CONFIG_DM_MULTIPATH_ST=m CONFIG_DM_DELAY=m CONFIG_DM_UEVENT=y CONFIG_DM_FLAKEY=m CONFIG_DM_VERITY=m # CONFIG_DM_VERITY_FEC is not set CONFIG_DM_SWITCH=m # CONFIG_DM_LOG_WRITES is not set # CONFIG_DM_INTEGRITY is not set CONFIG_TARGET_CORE=m CONFIG_TCM_IBLOCK=m CONFIG_TCM_FILEIO=m CONFIG_TCM_PSCSI=m # CONFIG_TCM_USER2 is not set CONFIG_LOOPBACK_TARGET=m CONFIG_TCM_FC=m CONFIG_ISCSI_TARGET=m # CONFIG_ISCSI_TARGET_CXGB4 is not set # CONFIG_SBP_TARGET is not set CONFIG_FUSION=y CONFIG_FUSION_SPI=m # CONFIG_FUSION_FC is not set CONFIG_FUSION_SAS=m CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_CTL=m CONFIG_FUSION_LOGGING=y # # IEEE 1394 (FireWire) support # CONFIG_FIREWIRE=m CONFIG_FIREWIRE_OHCI=m CONFIG_FIREWIRE_SBP2=m CONFIG_FIREWIRE_NET=m # CONFIG_FIREWIRE_NOSY is not set CONFIG_MACINTOSH_DRIVERS=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y CONFIG_MII=y CONFIG_NET_CORE=y CONFIG_BONDING=m CONFIG_DUMMY=m # CONFIG_EQUALIZER is not set CONFIG_NET_FC=y CONFIG_IFB=m CONFIG_NET_TEAM=m CONFIG_NET_TEAM_MODE_BROADCAST=m CONFIG_NET_TEAM_MODE_ROUNDROBIN=m CONFIG_NET_TEAM_MODE_RANDOM=m CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m CONFIG_NET_TEAM_MODE_LOADBALANCE=m CONFIG_MACVLAN=m CONFIG_MACVTAP=m CONFIG_VXLAN=m # CONFIG_GENEVE is not set # CONFIG_GTP is not set # CONFIG_MACSEC is not set CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_NETPOLL=y CONFIG_NET_POLL_CONTROLLER=y CONFIG_TUN=m CONFIG_TAP=m # CONFIG_TUN_VNET_CROSS_LE is not set CONFIG_VETH=m CONFIG_VIRTIO_NET=y CONFIG_NLMON=m # CONFIG_ARCNET is not set # CONFIG_ATM_DRIVERS is not set # # CAIF transport drivers # # # Distributed Switch Architecture drivers # CONFIG_ETHERNET=y CONFIG_MDIO=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_ADAPTEC is not set CONFIG_NET_VENDOR_AGERE=y # CONFIG_ET131X is not set CONFIG_NET_VENDOR_ALACRITECH=y # CONFIG_SLICOSS is not set # CONFIG_NET_VENDOR_ALTEON is not set # CONFIG_ALTERA_TSE is not set CONFIG_NET_VENDOR_AMAZON=y # CONFIG_ENA_ETHERNET is not set # CONFIG_NET_VENDOR_AMD is not set CONFIG_NET_VENDOR_AQUANTIA=y # CONFIG_AQTION is not set CONFIG_NET_VENDOR_ARC=y CONFIG_NET_VENDOR_ATHEROS=y CONFIG_ATL2=m CONFIG_ATL1=m CONFIG_ATL1E=m CONFIG_ATL1C=m CONFIG_ALX=m # CONFIG_NET_VENDOR_AURORA is not set CONFIG_NET_CADENCE=y # CONFIG_MACB is not set CONFIG_NET_VENDOR_BROADCOM=y CONFIG_B44=m CONFIG_B44_PCI_AUTOSELECT=y CONFIG_B44_PCICORE_AUTOSELECT=y CONFIG_B44_PCI=y # CONFIG_BCMGENET is not set CONFIG_BNX2=m CONFIG_CNIC=m CONFIG_TIGON3=y CONFIG_TIGON3_HWMON=y # CONFIG_BNX2X is not set # CONFIG_BNXT is not set CONFIG_NET_VENDOR_BROCADE=y CONFIG_BNA=m CONFIG_NET_VENDOR_CAVIUM=y # CONFIG_THUNDER_NIC_PF is not set # CONFIG_THUNDER_NIC_VF is not set # CONFIG_THUNDER_NIC_BGX is not set # CONFIG_THUNDER_NIC_RGX is not set # CONFIG_LIQUIDIO is not set # CONFIG_LIQUIDIO_VF is not set CONFIG_NET_VENDOR_CHELSIO=y # CONFIG_CHELSIO_T1 is not set CONFIG_CHELSIO_T3=m CONFIG_CHELSIO_T4=m # CONFIG_CHELSIO_T4_DCB is not set CONFIG_CHELSIO_T4VF=m CONFIG_CHELSIO_LIB=m CONFIG_NET_VENDOR_CISCO=y CONFIG_ENIC=m # CONFIG_CX_ECAT is not set CONFIG_DNET=m CONFIG_NET_VENDOR_DEC=y CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_DE2104X_DSL=0 CONFIG_TULIP=y # CONFIG_TULIP_MWI is not set CONFIG_TULIP_MMIO=y # CONFIG_TULIP_NAPI is not set CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m CONFIG_ULI526X=m CONFIG_PCMCIA_XIRCOM=m # CONFIG_NET_VENDOR_DLINK is not set CONFIG_NET_VENDOR_EMULEX=y CONFIG_BE2NET=m CONFIG_BE2NET_HWMON=y CONFIG_NET_VENDOR_EZCHIP=y # CONFIG_NET_VENDOR_EXAR is not set # CONFIG_NET_VENDOR_HP is not set CONFIG_NET_VENDOR_INTEL=y # CONFIG_E100 is not set CONFIG_E1000=y CONFIG_E1000E=y CONFIG_E1000E_HWTS=y CONFIG_IGB=y CONFIG_IGB_HWMON=y CONFIG_IGBVF=m CONFIG_IXGB=m CONFIG_IXGBE=y CONFIG_IXGBE_HWMON=y CONFIG_IXGBE_DCB=y CONFIG_IXGBEVF=m CONFIG_I40E=m # CONFIG_I40E_DCB is not set # CONFIG_I40EVF is not set # CONFIG_FM10K is not set # CONFIG_NET_VENDOR_I825XX is not set CONFIG_JME=m CONFIG_NET_VENDOR_MARVELL=y CONFIG_MVMDIO=m CONFIG_SKGE=m CONFIG_SKGE_DEBUG=y CONFIG_SKGE_GENESIS=y CONFIG_SKY2=m CONFIG_SKY2_DEBUG=y CONFIG_NET_VENDOR_MELLANOX=y CONFIG_MLX4_EN=m CONFIG_MLX4_EN_DCB=y CONFIG_MLX4_CORE=m CONFIG_MLX4_DEBUG=y # CONFIG_MLX5_CORE is not set # CONFIG_MLXSW_CORE is not set # CONFIG_MLXFW is not set # CONFIG_NET_VENDOR_MICREL is not set CONFIG_NET_VENDOR_MICROCHIP=y # CONFIG_ENC28J60 is not set # CONFIG_ENCX24J600 is not set CONFIG_NET_VENDOR_MYRI=y CONFIG_MYRI10GE=m # CONFIG_FEALNX is not set # CONFIG_NET_VENDOR_NATSEMI is not set CONFIG_NET_VENDOR_NETRONOME=y # CONFIG_NFP is not set # CONFIG_NET_VENDOR_NVIDIA is not set CONFIG_NET_VENDOR_OKI=y CONFIG_ETHOC=m CONFIG_NET_PACKET_ENGINE=y # CONFIG_HAMACHI is not set CONFIG_YELLOWFIN=m CONFIG_NET_VENDOR_QLOGIC=y CONFIG_QLA3XXX=m CONFIG_QLCNIC=m CONFIG_QLCNIC_SRIOV=y CONFIG_QLCNIC_DCB=y CONFIG_QLCNIC_HWMON=y CONFIG_QLGE=m CONFIG_NETXEN_NIC=m # CONFIG_QED is not set CONFIG_NET_VENDOR_QUALCOMM=y # CONFIG_QCOM_EMAC is not set CONFIG_NET_VENDOR_REALTEK=y # CONFIG_ATP is not set CONFIG_8139CP=y CONFIG_8139TOO=y CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set CONFIG_8139TOO_8129=y # CONFIG_8139_OLD_RX_RESET is not set CONFIG_R8169=y CONFIG_NET_VENDOR_RENESAS=y # CONFIG_NET_VENDOR_RDC is not set CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SAMSUNG=y # CONFIG_SXGBE_ETH is not set # CONFIG_NET_VENDOR_SEEQ is not set # CONFIG_NET_VENDOR_SILAN is not set # CONFIG_NET_VENDOR_SIS is not set CONFIG_NET_VENDOR_SOLARFLARE=y CONFIG_SFC=m CONFIG_SFC_MTD=y CONFIG_SFC_MCDI_MON=y CONFIG_SFC_SRIOV=y CONFIG_SFC_MCDI_LOGGING=y # CONFIG_SFC_FALCON is not set CONFIG_NET_VENDOR_SMSC=y CONFIG_EPIC100=m # CONFIG_SMSC911X is not set CONFIG_SMSC9420=m # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_SUN is not set # CONFIG_NET_VENDOR_TEHUTI is not set # CONFIG_NET_VENDOR_TI is not set # CONFIG_NET_VENDOR_VIA is not set # CONFIG_NET_VENDOR_WIZNET is not set CONFIG_NET_VENDOR_SYNOPSYS=y # CONFIG_DWC_XLGMAC is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_NET_SB1000 is not set CONFIG_MDIO_DEVICE=y CONFIG_MDIO_BITBANG=m # CONFIG_MDIO_GPIO is not set # CONFIG_MDIO_THUNDER is not set CONFIG_PHYLIB=y CONFIG_SWPHY=y # CONFIG_LED_TRIGGER_PHY is not set # # MII PHY device drivers # CONFIG_AMD_PHY=m # CONFIG_AQUANTIA_PHY is not set CONFIG_AT803X_PHY=m # CONFIG_BCM7XXX_PHY is not set CONFIG_BCM87XX_PHY=m CONFIG_BCM_NET_PHYLIB=m CONFIG_BROADCOM_PHY=m CONFIG_CICADA_PHY=m # CONFIG_CORTINA_PHY is not set CONFIG_DAVICOM_PHY=m # CONFIG_DP83848_PHY is not set # CONFIG_DP83867_PHY is not set CONFIG_FIXED_PHY=y CONFIG_ICPLUS_PHY=m # CONFIG_INTEL_XWAY_PHY is not set CONFIG_LSI_ET1011C_PHY=m CONFIG_LXT_PHY=m CONFIG_MARVELL_PHY=m # CONFIG_MARVELL_10G_PHY is not set CONFIG_MICREL_PHY=m # CONFIG_MICROCHIP_PHY is not set # CONFIG_MICROSEMI_PHY is not set CONFIG_NATIONAL_PHY=m CONFIG_QSEMI_PHY=m CONFIG_REALTEK_PHY=m CONFIG_SMSC_PHY=m CONFIG_STE10XP=m # CONFIG_TERANETICS_PHY is not set CONFIG_VITESSE_PHY=m # CONFIG_XILINX_GMII2RGMII is not set # CONFIG_MICREL_KS8995MA is not set # CONFIG_PLIP is not set CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m CONFIG_PPP_MULTILINK=y CONFIG_PPPOATM=m CONFIG_PPPOE=m CONFIG_PPTP=m CONFIG_PPPOL2TP=m CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_SLIP=m CONFIG_SLHC=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y # CONFIG_SLIP_MODE_SLIP6 is not set CONFIG_USB_NET_DRIVERS=y CONFIG_USB_CATC=y CONFIG_USB_KAWETH=y CONFIG_USB_PEGASUS=y CONFIG_USB_RTL8150=y CONFIG_USB_RTL8152=m # CONFIG_USB_LAN78XX is not set CONFIG_USB_USBNET=y CONFIG_USB_NET_AX8817X=y CONFIG_USB_NET_AX88179_178A=m CONFIG_USB_NET_CDCETHER=y CONFIG_USB_NET_CDC_EEM=y CONFIG_USB_NET_CDC_NCM=m # CONFIG_USB_NET_HUAWEI_CDC_NCM is not set CONFIG_USB_NET_CDC_MBIM=m CONFIG_USB_NET_DM9601=y # CONFIG_USB_NET_SR9700 is not set # CONFIG_USB_NET_SR9800 is not set CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y CONFIG_USB_NET_GL620A=y CONFIG_USB_NET_NET1080=y CONFIG_USB_NET_PLUSB=y CONFIG_USB_NET_MCS7830=y CONFIG_USB_NET_RNDIS_HOST=y CONFIG_USB_NET_CDC_SUBSET_ENABLE=y CONFIG_USB_NET_CDC_SUBSET=y CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y CONFIG_USB_BELKIN=y CONFIG_USB_ARMLINUX=y CONFIG_USB_EPSON2888=y CONFIG_USB_KC2190=y CONFIG_USB_NET_ZAURUS=y CONFIG_USB_NET_CX82310_ETH=m CONFIG_USB_NET_KALMIA=m CONFIG_USB_NET_QMI_WWAN=m CONFIG_USB_HSO=m CONFIG_USB_NET_INT51X1=y CONFIG_USB_IPHETH=y CONFIG_USB_SIERRA_NET=y CONFIG_USB_VL600=m # CONFIG_USB_NET_CH9200 is not set CONFIG_WLAN=y # CONFIG_WIRELESS_WDS is not set CONFIG_WLAN_VENDOR_ADMTEK=y # CONFIG_ADM8211 is not set CONFIG_WLAN_VENDOR_ATH=y # CONFIG_ATH_DEBUG is not set # CONFIG_ATH5K is not set # CONFIG_ATH5K_PCI is not set # CONFIG_ATH9K is not set # CONFIG_ATH9K_HTC is not set # CONFIG_CARL9170 is not set # CONFIG_ATH6KL is not set # CONFIG_AR5523 is not set # CONFIG_WIL6210 is not set # CONFIG_ATH10K is not set # CONFIG_WCN36XX is not set CONFIG_WLAN_VENDOR_ATMEL=y # CONFIG_ATMEL is not set # CONFIG_AT76C50X_USB is not set CONFIG_WLAN_VENDOR_BROADCOM=y # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_BRCMSMAC is not set # CONFIG_BRCMFMAC is not set CONFIG_WLAN_VENDOR_CISCO=y # CONFIG_AIRO is not set CONFIG_WLAN_VENDOR_INTEL=y # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set # CONFIG_IWL4965 is not set # CONFIG_IWL3945 is not set # CONFIG_IWLWIFI is not set CONFIG_WLAN_VENDOR_INTERSIL=y # CONFIG_HOSTAP is not set # CONFIG_HERMES is not set # CONFIG_P54_COMMON is not set # CONFIG_PRISM54 is not set CONFIG_WLAN_VENDOR_MARVELL=y # CONFIG_LIBERTAS is not set # CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_MWIFIEX is not set # CONFIG_MWL8K is not set CONFIG_WLAN_VENDOR_MEDIATEK=y # CONFIG_MT7601U is not set CONFIG_WLAN_VENDOR_RALINK=y # CONFIG_RT2X00 is not set CONFIG_WLAN_VENDOR_REALTEK=y # CONFIG_RTL8180 is not set # CONFIG_RTL8187 is not set CONFIG_RTL_CARDS=m # CONFIG_RTL8192CE is not set # CONFIG_RTL8192SE is not set # CONFIG_RTL8192DE is not set # CONFIG_RTL8723AE is not set # CONFIG_RTL8723BE is not set # CONFIG_RTL8188EE is not set # CONFIG_RTL8192EE is not set # CONFIG_RTL8821AE is not set # CONFIG_RTL8192CU is not set # CONFIG_RTL8XXXU is not set CONFIG_WLAN_VENDOR_RSI=y # CONFIG_RSI_91X is not set CONFIG_WLAN_VENDOR_ST=y # CONFIG_CW1200 is not set CONFIG_WLAN_VENDOR_TI=y # CONFIG_WL1251 is not set # CONFIG_WL12XX is not set # CONFIG_WL18XX is not set # CONFIG_WLCORE is not set CONFIG_WLAN_VENDOR_ZYDAS=y # CONFIG_USB_ZD1201 is not set # CONFIG_ZD1211RW is not set CONFIG_WLAN_VENDOR_QUANTENNA=y # CONFIG_QTNFMAC_PEARL_PCIE is not set CONFIG_MAC80211_HWSIM=m # CONFIG_USB_NET_RNDIS_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # CONFIG_WAN=y # CONFIG_LANMEDIA is not set CONFIG_HDLC=m CONFIG_HDLC_RAW=m # CONFIG_HDLC_RAW_ETH is not set CONFIG_HDLC_CISCO=m CONFIG_HDLC_FR=m CONFIG_HDLC_PPP=m # # X.25/LAPB support is disabled # # CONFIG_PCI200SYN is not set # CONFIG_WANXL is not set # CONFIG_PC300TOO is not set # CONFIG_FARSYNC is not set # CONFIG_DSCC4 is not set CONFIG_DLCI=m CONFIG_DLCI_MAX=8 # CONFIG_SBNI is not set CONFIG_IEEE802154_DRIVERS=m CONFIG_IEEE802154_FAKELB=m # CONFIG_IEEE802154_AT86RF230 is not set # CONFIG_IEEE802154_MRF24J40 is not set # CONFIG_IEEE802154_CC2520 is not set # CONFIG_IEEE802154_ATUSB is not set # CONFIG_IEEE802154_ADF7242 is not set # CONFIG_IEEE802154_CA8210 is not set CONFIG_XEN_NETDEV_FRONTEND=m # CONFIG_XEN_NETDEV_BACKEND is not set CONFIG_VMXNET3=m # CONFIG_FUJITSU_ES is not set CONFIG_HYPERV_NET=m CONFIG_ISDN=y CONFIG_ISDN_I4L=m CONFIG_ISDN_PPP=y CONFIG_ISDN_PPP_VJ=y CONFIG_ISDN_MPP=y CONFIG_IPPP_FILTER=y # CONFIG_ISDN_PPP_BSDCOMP is not set CONFIG_ISDN_AUDIO=y CONFIG_ISDN_TTY_FAX=y # # ISDN feature submodules # CONFIG_ISDN_DIVERSION=m # # ISDN4Linux hardware drivers # # # Passive cards # # CONFIG_ISDN_DRV_HISAX is not set CONFIG_ISDN_CAPI=m # CONFIG_CAPI_TRACE is not set CONFIG_ISDN_CAPI_CAPI20=m CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPIDRV=m # CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set # # CAPI hardware drivers # CONFIG_CAPI_AVM=y CONFIG_ISDN_DRV_AVMB1_B1PCI=m CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y CONFIG_ISDN_DRV_AVMB1_T1PCI=m CONFIG_ISDN_DRV_AVMB1_C4=m # CONFIG_CAPI_EICON is not set CONFIG_ISDN_DRV_GIGASET=m CONFIG_GIGASET_CAPI=y # CONFIG_GIGASET_I4L is not set # CONFIG_GIGASET_DUMMYLL is not set CONFIG_GIGASET_BASE=m CONFIG_GIGASET_M105=m CONFIG_GIGASET_M101=m # CONFIG_GIGASET_DEBUG is not set CONFIG_HYSDN=m CONFIG_HYSDN_CAPI=y CONFIG_MISDN=m CONFIG_MISDN_DSP=m CONFIG_MISDN_L1OIP=m # # mISDN hardware drivers # CONFIG_MISDN_HFCPCI=m CONFIG_MISDN_HFCMULTI=m CONFIG_MISDN_HFCUSB=m CONFIG_MISDN_AVMFRITZ=m CONFIG_MISDN_SPEEDFAX=m CONFIG_MISDN_INFINEON=m CONFIG_MISDN_W6692=m CONFIG_MISDN_NETJET=m CONFIG_MISDN_IPAC=m CONFIG_MISDN_ISAR=m CONFIG_ISDN_HDLC=m # CONFIG_NVM is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_LEDS=y CONFIG_INPUT_FF_MEMLESS=m CONFIG_INPUT_POLLDEV=m CONFIG_INPUT_SPARSEKMAP=m # CONFIG_INPUT_MATRIXKMAP is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ADP5589 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT1070 is not set # CONFIG_KEYBOARD_QT2160 is not set # CONFIG_KEYBOARD_DLINK_DIR685 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_GPIO_POLLED is not set # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_TCA8418 is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_LM8333 is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_MCS is not set # CONFIG_KEYBOARD_MPR121 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_SAMSUNG is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_TM2_TOUCHKEY is not set # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_BYD=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y CONFIG_MOUSE_PS2_CYPRESS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_PS2_SENTELIC=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set CONFIG_MOUSE_PS2_FOCALTECH=y # CONFIG_MOUSE_PS2_VMMOUSE is not set CONFIG_MOUSE_PS2_SMBUS=y CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_APPLETOUCH=m CONFIG_MOUSE_BCM5974=m CONFIG_MOUSE_CYAPA=m # CONFIG_MOUSE_ELAN_I2C is not set CONFIG_MOUSE_VSXXXAA=m # CONFIG_MOUSE_GPIO is not set CONFIG_MOUSE_SYNAPTICS_I2C=m CONFIG_MOUSE_SYNAPTICS_USB=m # CONFIG_INPUT_JOYSTICK is not set CONFIG_INPUT_TABLET=y CONFIG_TABLET_USB_ACECAD=m CONFIG_TABLET_USB_AIPTEK=m CONFIG_TABLET_USB_GTCO=m # CONFIG_TABLET_USB_HANWANG is not set CONFIG_TABLET_USB_KBTAB=m # CONFIG_TABLET_USB_PEGASUS is not set # CONFIG_TABLET_SERIAL_WACOM4 is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_PROPERTIES=y # CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_AD7877 is not set # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_ATMEL_MXT is not set # CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set # CONFIG_TOUCHSCREEN_BU21013 is not set # CONFIG_TOUCHSCREEN_CY8CTMG110 is not set # CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set # CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set # CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GOODIX is not set # CONFIG_TOUCHSCREEN_ILI210X is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_EKTF2127 is not set # CONFIG_TOUCHSCREEN_ELAN is not set # CONFIG_TOUCHSCREEN_ELO is not set CONFIG_TOUCHSCREEN_WACOM_W8001=m CONFIG_TOUCHSCREEN_WACOM_I2C=m # CONFIG_TOUCHSCREEN_MAX11801 is not set # CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MMS114 is not set # CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_PIXCIR is not set # CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set # CONFIG_TOUCHSCREEN_WM97XX is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC_SERIO is not set # CONFIG_TOUCHSCREEN_TSC2004 is not set # CONFIG_TOUCHSCREEN_TSC2005 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_TOUCHSCREEN_RM_TS is not set # CONFIG_TOUCHSCREEN_SILEAD is not set # CONFIG_TOUCHSCREEN_SIS_I2C is not set # CONFIG_TOUCHSCREEN_ST1232 is not set # CONFIG_TOUCHSCREEN_STMFTS is not set # CONFIG_TOUCHSCREEN_SUR40 is not set # CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set # CONFIG_TOUCHSCREEN_SX8654 is not set # CONFIG_TOUCHSCREEN_TPS6507X is not set # CONFIG_TOUCHSCREEN_ZET6223 is not set # CONFIG_TOUCHSCREEN_ZFORCE is not set # CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_BMA150 is not set # CONFIG_INPUT_E3X0_BUTTON is not set CONFIG_INPUT_PCSPKR=m # CONFIG_INPUT_MMA8450 is not set CONFIG_INPUT_APANEL=m # CONFIG_INPUT_GP2A is not set # CONFIG_INPUT_GPIO_BEEPER is not set # CONFIG_INPUT_GPIO_TILT_POLLED is not set # CONFIG_INPUT_GPIO_DECODER is not set CONFIG_INPUT_ATLAS_BTNS=m CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m # CONFIG_INPUT_KXTJ9 is not set CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m CONFIG_INPUT_UINPUT=m # CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_PWM_BEEPER is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set # CONFIG_INPUT_ADXL34X is not set # CONFIG_INPUT_IMS_PCU is not set # CONFIG_INPUT_CMA3000 is not set CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m # CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set # CONFIG_INPUT_DRV260X_HAPTICS is not set # CONFIG_INPUT_DRV2665_HAPTICS is not set # CONFIG_INPUT_DRV2667_HAPTICS is not set # CONFIG_RMI4_CORE is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m CONFIG_SERIO_ALTERA_PS2=m # CONFIG_SERIO_PS2MULT is not set CONFIG_SERIO_ARC_PS2=m CONFIG_HYPERV_KEYBOARD=m # CONFIG_USERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_TTY=y CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_VT_CONSOLE_SLEEP=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set CONFIG_CYCLADES=m # CONFIG_CYZ_INTR is not set CONFIG_MOXA_INTELLIO=m CONFIG_MOXA_SMARTIO=m CONFIG_SYNCLINK=m CONFIG_SYNCLINKMP=m CONFIG_SYNCLINK_GT=m CONFIG_NOZOMI=m # CONFIG_ISI is not set CONFIG_N_HDLC=m CONFIG_N_GSM=m # CONFIG_TRACE_SINK is not set CONFIG_DEVMEM=y # CONFIG_DEVKMEM is not set # # Serial drivers # CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_PNP=y # CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_EXAR=y CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y # CONFIG_SERIAL_8250_FSL is not set CONFIG_SERIAL_8250_DW=y # CONFIG_SERIAL_8250_RT288X is not set CONFIG_SERIAL_8250_LPSS=y CONFIG_SERIAL_8250_MID=y # CONFIG_SERIAL_8250_MOXA is not set # # Non-8250 serial port support # # CONFIG_SERIAL_MAX3100 is not set # CONFIG_SERIAL_MAX310X is not set # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_JSM=m # CONFIG_SERIAL_SCCNXP is not set # CONFIG_SERIAL_SC16IS7XX is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_IFX6X60 is not set CONFIG_SERIAL_ARC=m CONFIG_SERIAL_ARC_NR_PORTS=1 # CONFIG_SERIAL_RP2 is not set # CONFIG_SERIAL_FSL_LPUART is not set # CONFIG_SERIAL_DEV_BUS is not set # CONFIG_TTY_PRINTK is not set CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m CONFIG_HVC_DRIVER=y CONFIG_HVC_IRQ=y CONFIG_HVC_XEN=y CONFIG_HVC_XEN_FRONTEND=y CONFIG_VIRTIO_CONSOLE=y CONFIG_IPMI_HANDLER=m CONFIG_IPMI_DMI_DECODE=y # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m # CONFIG_IPMI_SSIF is not set CONFIG_IPMI_WATCHDOG=m CONFIG_IPMI_POWEROFF=m CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m CONFIG_HW_RANDOM_VIA=m CONFIG_HW_RANDOM_VIRTIO=y CONFIG_HW_RANDOM_TPM=m CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=8192 CONFIG_HPET=y CONFIG_HPET_MMAP=y # CONFIG_HPET_MMAP_DEFAULT is not set CONFIG_HANGCHECK_TIMER=m CONFIG_UV_MMTIMER=m CONFIG_TCG_TPM=y CONFIG_TCG_TIS_CORE=y CONFIG_TCG_TIS=y # CONFIG_TCG_TIS_SPI is not set # CONFIG_TCG_TIS_I2C_ATMEL is not set # CONFIG_TCG_TIS_I2C_INFINEON is not set # CONFIG_TCG_TIS_I2C_NUVOTON is not set CONFIG_TCG_NSC=m CONFIG_TCG_ATMEL=m CONFIG_TCG_INFINEON=m # CONFIG_TCG_XEN is not set # CONFIG_TCG_CRB is not set # CONFIG_TCG_VTPM_PROXY is not set # CONFIG_TCG_TIS_ST33ZP24_I2C is not set # CONFIG_TCG_TIS_ST33ZP24_SPI is not set CONFIG_TELCLOCK=m CONFIG_DEVPORT=y # CONFIG_XILLYBUS is not set # # I2C support # CONFIG_I2C=y CONFIG_ACPI_I2C_OPREGION=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_MUX=m # # Multiplexer I2C Chip support # # CONFIG_I2C_MUX_GPIO is not set # CONFIG_I2C_MUX_LTC4306 is not set # CONFIG_I2C_MUX_PCA9541 is not set # CONFIG_I2C_MUX_PCA954x is not set # CONFIG_I2C_MUX_PINCTRL is not set # CONFIG_I2C_MUX_REG is not set # CONFIG_I2C_MUX_MLXCPLD is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_SMBUS=y CONFIG_I2C_ALGOBIT=y CONFIG_I2C_ALGOPCA=m # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set CONFIG_I2C_AMD756=m CONFIG_I2C_AMD756_S4882=m CONFIG_I2C_AMD8111=m CONFIG_I2C_I801=y CONFIG_I2C_ISCH=m CONFIG_I2C_ISMT=m CONFIG_I2C_PIIX4=m CONFIG_I2C_NFORCE2=m CONFIG_I2C_NFORCE2_S4985=m # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set CONFIG_I2C_SIS96X=m CONFIG_I2C_VIA=m CONFIG_I2C_VIAPRO=m # # ACPI drivers # CONFIG_I2C_SCMI=m # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CBUS_GPIO is not set CONFIG_I2C_DESIGNWARE_CORE=m CONFIG_I2C_DESIGNWARE_PLATFORM=m # CONFIG_I2C_DESIGNWARE_SLAVE is not set CONFIG_I2C_DESIGNWARE_PCI=m # CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set # CONFIG_I2C_EMEV2 is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set CONFIG_I2C_PCA_PLATFORM=m # CONFIG_I2C_PXA_PCI is not set CONFIG_I2C_SIMTEC=m # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # CONFIG_I2C_DIOLAN_U2C=m CONFIG_I2C_PARPORT=m CONFIG_I2C_PARPORT_LIGHT=m # CONFIG_I2C_ROBOTFUZZ_OSIF is not set # CONFIG_I2C_TAOS_EVM is not set CONFIG_I2C_TINY_USB=m CONFIG_I2C_VIPERBOARD=m # # Other I2C/SMBus bus drivers # # CONFIG_I2C_MLXCPLD is not set CONFIG_I2C_STUB=m # CONFIG_I2C_SLAVE is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # # CONFIG_SPI_ALTERA is not set # CONFIG_SPI_AXI_SPI_ENGINE is not set # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_BUTTERFLY is not set # CONFIG_SPI_CADENCE is not set CONFIG_SPI_DESIGNWARE=m # CONFIG_SPI_DW_PCI is not set # CONFIG_SPI_DW_MMIO is not set # CONFIG_SPI_GPIO is not set # CONFIG_SPI_LM70_LLP is not set # CONFIG_SPI_OC_TINY is not set CONFIG_SPI_PXA2XX=m CONFIG_SPI_PXA2XX_PCI=m # CONFIG_SPI_ROCKCHIP is not set # CONFIG_SPI_SC18IS602 is not set # CONFIG_SPI_XCOMM is not set # CONFIG_SPI_XILINX is not set # CONFIG_SPI_ZYNQMP_GQSPI is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_LOOPBACK_TEST is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_SLAVE is not set # CONFIG_SPMI is not set # CONFIG_HSI is not set CONFIG_PPS=y # CONFIG_PPS_DEBUG is not set # # PPS clients support # # CONFIG_PPS_CLIENT_KTIMER is not set CONFIG_PPS_CLIENT_LDISC=m CONFIG_PPS_CLIENT_PARPORT=m CONFIG_PPS_CLIENT_GPIO=m # # PPS generators support # # # PTP clock support # CONFIG_PTP_1588_CLOCK=y CONFIG_DP83640_PHY=m CONFIG_PTP_1588_CLOCK_KVM=y CONFIG_PINCTRL=y # # Pin controllers # CONFIG_PINMUX=y CONFIG_PINCONF=y CONFIG_GENERIC_PINCONF=y # CONFIG_DEBUG_PINCTRL is not set # CONFIG_PINCTRL_AMD is not set # CONFIG_PINCTRL_MCP23S08 is not set # CONFIG_PINCTRL_SX150X is not set CONFIG_PINCTRL_BAYTRAIL=y # CONFIG_PINCTRL_CHERRYVIEW is not set # CONFIG_PINCTRL_BROXTON is not set # CONFIG_PINCTRL_CANNONLAKE is not set # CONFIG_PINCTRL_GEMINILAKE is not set # CONFIG_PINCTRL_SUNRISEPOINT is not set CONFIG_GPIOLIB=y CONFIG_GPIO_ACPI=y CONFIG_GPIOLIB_IRQCHIP=y # CONFIG_DEBUG_GPIO is not set CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO drivers # # CONFIG_GPIO_AMDPT is not set # CONFIG_GPIO_DWAPB is not set # CONFIG_GPIO_EXAR is not set # CONFIG_GPIO_GENERIC_PLATFORM is not set # CONFIG_GPIO_ICH is not set CONFIG_GPIO_LYNXPOINT=m CONFIG_GPIO_MOCKUP=y # CONFIG_GPIO_VX855 is not set # # Port-mapped I/O GPIO drivers # # CONFIG_GPIO_F7188X is not set # CONFIG_GPIO_IT87 is not set # CONFIG_GPIO_SCH is not set # CONFIG_GPIO_SCH311X is not set # # I2C GPIO expanders # # CONFIG_GPIO_ADP5588 is not set # CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # CONFIG_GPIO_SX150X is not set # CONFIG_GPIO_TPIC2810 is not set # # MFD GPIO expanders # # # PCI GPIO expanders # # CONFIG_GPIO_AMD8111 is not set # CONFIG_GPIO_ML_IOH is not set # CONFIG_GPIO_PCI_IDIO_16 is not set # CONFIG_GPIO_RDC321X is not set # # SPI GPIO expanders # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MC33880 is not set # CONFIG_GPIO_PISOSR is not set # CONFIG_GPIO_XRA1403 is not set # # USB GPIO expanders # # CONFIG_GPIO_VIPERBOARD is not set # CONFIG_W1 is not set # CONFIG_POWER_AVS is not set CONFIG_POWER_RESET=y # CONFIG_POWER_RESET_RESTART is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_TEST_POWER is not set # CONFIG_BATTERY_DS2780 is not set # CONFIG_BATTERY_DS2781 is not set # CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_SBS is not set # CONFIG_CHARGER_SBS is not set # CONFIG_BATTERY_BQ27XXX is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_BATTERY_MAX17042 is not set # CONFIG_CHARGER_ISP1704 is not set # CONFIG_CHARGER_MAX8903 is not set # CONFIG_CHARGER_LP8727 is not set # CONFIG_CHARGER_GPIO is not set # CONFIG_CHARGER_LTC3651 is not set # CONFIG_CHARGER_BQ2415X is not set # CONFIG_CHARGER_BQ24190 is not set # CONFIG_CHARGER_BQ24257 is not set # CONFIG_CHARGER_BQ24735 is not set # CONFIG_CHARGER_BQ25890 is not set CONFIG_CHARGER_SMB347=m # CONFIG_BATTERY_GAUGE_LTC2941 is not set # CONFIG_CHARGER_RT9455 is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # CONFIG_SENSORS_ABITUGURU=m CONFIG_SENSORS_ABITUGURU3=m # CONFIG_SENSORS_AD7314 is not set CONFIG_SENSORS_AD7414=m CONFIG_SENSORS_AD7418=m CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1026=m CONFIG_SENSORS_ADM1029=m CONFIG_SENSORS_ADM1031=m CONFIG_SENSORS_ADM9240=m CONFIG_SENSORS_ADT7X10=m # CONFIG_SENSORS_ADT7310 is not set CONFIG_SENSORS_ADT7410=m CONFIG_SENSORS_ADT7411=m CONFIG_SENSORS_ADT7462=m CONFIG_SENSORS_ADT7470=m CONFIG_SENSORS_ADT7475=m CONFIG_SENSORS_ASC7621=m CONFIG_SENSORS_K8TEMP=m CONFIG_SENSORS_K10TEMP=m CONFIG_SENSORS_FAM15H_POWER=m CONFIG_SENSORS_APPLESMC=m CONFIG_SENSORS_ASB100=m # CONFIG_SENSORS_ASPEED is not set CONFIG_SENSORS_ATXP1=m CONFIG_SENSORS_DS620=m CONFIG_SENSORS_DS1621=m CONFIG_SENSORS_DELL_SMM=m CONFIG_SENSORS_I5K_AMB=m CONFIG_SENSORS_F71805F=m CONFIG_SENSORS_F71882FG=m CONFIG_SENSORS_F75375S=m CONFIG_SENSORS_FSCHMD=m # CONFIG_SENSORS_FTSTEUTATES is not set CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_G760A=m # CONFIG_SENSORS_G762 is not set # CONFIG_SENSORS_GPIO_FAN is not set # CONFIG_SENSORS_HIH6130 is not set CONFIG_SENSORS_IBMAEM=m CONFIG_SENSORS_IBMPEX=m # CONFIG_SENSORS_I5500 is not set CONFIG_SENSORS_CORETEMP=m CONFIG_SENSORS_IT87=m # CONFIG_SENSORS_JC42 is not set # CONFIG_SENSORS_POWR1220 is not set CONFIG_SENSORS_LINEAGE=m # CONFIG_SENSORS_LTC2945 is not set # CONFIG_SENSORS_LTC2990 is not set CONFIG_SENSORS_LTC4151=m CONFIG_SENSORS_LTC4215=m # CONFIG_SENSORS_LTC4222 is not set CONFIG_SENSORS_LTC4245=m # CONFIG_SENSORS_LTC4260 is not set CONFIG_SENSORS_LTC4261=m # CONFIG_SENSORS_MAX1111 is not set CONFIG_SENSORS_MAX16065=m CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_MAX1668=m CONFIG_SENSORS_MAX197=m # CONFIG_SENSORS_MAX31722 is not set CONFIG_SENSORS_MAX6639=m CONFIG_SENSORS_MAX6642=m CONFIG_SENSORS_MAX6650=m CONFIG_SENSORS_MAX6697=m # CONFIG_SENSORS_MAX31790 is not set CONFIG_SENSORS_MCP3021=m # CONFIG_SENSORS_TC654 is not set # CONFIG_SENSORS_ADCXX is not set CONFIG_SENSORS_LM63=m # CONFIG_SENSORS_LM70 is not set CONFIG_SENSORS_LM73=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM80=m CONFIG_SENSORS_LM83=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m CONFIG_SENSORS_LM92=m CONFIG_SENSORS_LM93=m CONFIG_SENSORS_LM95234=m CONFIG_SENSORS_LM95241=m CONFIG_SENSORS_LM95245=m CONFIG_SENSORS_PC87360=m CONFIG_SENSORS_PC87427=m CONFIG_SENSORS_NTC_THERMISTOR=m # CONFIG_SENSORS_NCT6683 is not set CONFIG_SENSORS_NCT6775=m # CONFIG_SENSORS_NCT7802 is not set # CONFIG_SENSORS_NCT7904 is not set CONFIG_SENSORS_PCF8591=m CONFIG_PMBUS=m CONFIG_SENSORS_PMBUS=m CONFIG_SENSORS_ADM1275=m # CONFIG_SENSORS_IR35221 is not set CONFIG_SENSORS_LM25066=m CONFIG_SENSORS_LTC2978=m # CONFIG_SENSORS_LTC3815 is not set CONFIG_SENSORS_MAX16064=m # CONFIG_SENSORS_MAX20751 is not set CONFIG_SENSORS_MAX34440=m CONFIG_SENSORS_MAX8688=m # CONFIG_SENSORS_TPS40422 is not set CONFIG_SENSORS_UCD9000=m CONFIG_SENSORS_UCD9200=m CONFIG_SENSORS_ZL6100=m # CONFIG_SENSORS_SHT15 is not set CONFIG_SENSORS_SHT21=m # CONFIG_SENSORS_SHT3x is not set # CONFIG_SENSORS_SHTC1 is not set CONFIG_SENSORS_SIS5595=m CONFIG_SENSORS_DME1737=m CONFIG_SENSORS_EMC1403=m # CONFIG_SENSORS_EMC2103 is not set CONFIG_SENSORS_EMC6W201=m CONFIG_SENSORS_SMSC47M1=m CONFIG_SENSORS_SMSC47M192=m CONFIG_SENSORS_SMSC47B397=m CONFIG_SENSORS_SCH56XX_COMMON=m CONFIG_SENSORS_SCH5627=m CONFIG_SENSORS_SCH5636=m # CONFIG_SENSORS_STTS751 is not set # CONFIG_SENSORS_SMM665 is not set # CONFIG_SENSORS_ADC128D818 is not set CONFIG_SENSORS_ADS1015=m CONFIG_SENSORS_ADS7828=m # CONFIG_SENSORS_ADS7871 is not set CONFIG_SENSORS_AMC6821=m CONFIG_SENSORS_INA209=m CONFIG_SENSORS_INA2XX=m # CONFIG_SENSORS_INA3221 is not set # CONFIG_SENSORS_TC74 is not set CONFIG_SENSORS_THMC50=m CONFIG_SENSORS_TMP102=m # CONFIG_SENSORS_TMP103 is not set # CONFIG_SENSORS_TMP108 is not set CONFIG_SENSORS_TMP401=m CONFIG_SENSORS_TMP421=m CONFIG_SENSORS_VIA_CPUTEMP=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT1211=m CONFIG_SENSORS_VT8231=m CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83791D=m CONFIG_SENSORS_W83792D=m CONFIG_SENSORS_W83793=m CONFIG_SENSORS_W83795=m # CONFIG_SENSORS_W83795_FANCTRL is not set CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83L786NG=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m # CONFIG_SENSORS_XGENE is not set # # ACPI drivers # CONFIG_SENSORS_ACPI_POWER=m CONFIG_SENSORS_ATK0110=m CONFIG_THERMAL=y CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_WRITABLE_TRIPS=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_BANG_BANG=y CONFIG_THERMAL_GOV_USER_SPACE=y # CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set # CONFIG_THERMAL_EMULATION is not set CONFIG_INTEL_POWERCLAMP=m CONFIG_X86_PKG_TEMP_THERMAL=m # CONFIG_INTEL_SOC_DTS_THERMAL is not set # # ACPI INT340X thermal drivers # # CONFIG_INT340X_THERMAL is not set CONFIG_INTEL_PCH_THERMAL=m CONFIG_WATCHDOG=y CONFIG_WATCHDOG_CORE=y # CONFIG_WATCHDOG_NOWAYOUT is not set CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y # CONFIG_WATCHDOG_SYSFS is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m # CONFIG_WDAT_WDT is not set # CONFIG_XILINX_WATCHDOG is not set # CONFIG_ZIIRAVE_WATCHDOG is not set # CONFIG_CADENCE_WATCHDOG is not set # CONFIG_DW_WATCHDOG is not set # CONFIG_MAX63XX_WATCHDOG is not set # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set CONFIG_ALIM1535_WDT=m CONFIG_ALIM7101_WDT=m CONFIG_F71808E_WDT=m CONFIG_SP5100_TCO=m CONFIG_SBC_FITPC2_WATCHDOG=m # CONFIG_EUROTECH_WDT is not set CONFIG_IB700_WDT=m CONFIG_IBMASR=m # CONFIG_WAFER_WDT is not set CONFIG_I6300ESB_WDT=y CONFIG_IE6XX_WDT=m CONFIG_ITCO_WDT=y CONFIG_ITCO_VENDOR_SUPPORT=y CONFIG_IT8712F_WDT=m CONFIG_IT87_WDT=m CONFIG_HP_WATCHDOG=m CONFIG_HPWDT_NMI_DECODING=y # CONFIG_SC1200_WDT is not set # CONFIG_PC87413_WDT is not set CONFIG_NV_TCO=m # CONFIG_60XX_WDT is not set # CONFIG_CPU5_WDT is not set CONFIG_SMSC_SCH311X_WDT=m # CONFIG_SMSC37B787_WDT is not set CONFIG_VIA_WDT=m CONFIG_W83627HF_WDT=m CONFIG_W83877F_WDT=m CONFIG_W83977F_WDT=m CONFIG_MACHZ_WDT=m # CONFIG_SBC_EPX_C3_WATCHDOG is not set # CONFIG_INTEL_MEI_WDT is not set # CONFIG_NI903X_WDT is not set # CONFIG_NIC7018_WDT is not set # CONFIG_MEN_A21_WDT is not set CONFIG_XEN_WDT=m # # PCI-based Watchdog Cards # CONFIG_PCIPCWATCHDOG=m CONFIG_WDTPCI=m # # USB-based Watchdog Cards # CONFIG_USBPCWATCHDOG=m # # Watchdog Pretimeout Governors # # CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # CONFIG_SSB=m CONFIG_SSB_SPROM=y CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y # CONFIG_SSB_B43_PCI_BRIDGE is not set CONFIG_SSB_SDIOHOST_POSSIBLE=y CONFIG_SSB_SDIOHOST=y # CONFIG_SSB_SILENT is not set # CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y # CONFIG_SSB_DRIVER_GPIO is not set CONFIG_BCMA_POSSIBLE=y # # Broadcom specific AMBA # CONFIG_BCMA=m CONFIG_BCMA_HOST_PCI_POSSIBLE=y CONFIG_BCMA_HOST_PCI=y # CONFIG_BCMA_HOST_SOC is not set CONFIG_BCMA_DRIVER_PCI=y CONFIG_BCMA_DRIVER_GMAC_CMN=y # CONFIG_BCMA_DRIVER_GPIO is not set # CONFIG_BCMA_DEBUG is not set # # Multifunction device drivers # CONFIG_MFD_CORE=y # CONFIG_MFD_AS3711 is not set # CONFIG_PMIC_ADP5520 is not set # CONFIG_MFD_AAT2870_CORE is not set # CONFIG_MFD_BCM590XX is not set # CONFIG_MFD_AXP20X_I2C is not set # CONFIG_MFD_CROS_EC is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_DA9052_SPI is not set # CONFIG_MFD_DA9052_I2C is not set # CONFIG_MFD_DA9055 is not set # CONFIG_MFD_DA9062 is not set # CONFIG_MFD_DA9063 is not set # CONFIG_MFD_DA9150 is not set # CONFIG_MFD_DLN2 is not set # CONFIG_MFD_MC13XXX_SPI is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_HTC_I2CPLD is not set # CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set CONFIG_LPC_ICH=y CONFIG_LPC_SCH=m # CONFIG_INTEL_SOC_PMIC is not set # CONFIG_INTEL_SOC_PMIC_CHTWC is not set # CONFIG_MFD_INTEL_LPSS_ACPI is not set # CONFIG_MFD_INTEL_LPSS_PCI is not set # CONFIG_MFD_JANZ_CMODIO is not set # CONFIG_MFD_KEMPLD is not set # CONFIG_MFD_88PM800 is not set # CONFIG_MFD_88PM805 is not set # CONFIG_MFD_88PM860X is not set # CONFIG_MFD_MAX14577 is not set # CONFIG_MFD_MAX77693 is not set # CONFIG_MFD_MAX77843 is not set # CONFIG_MFD_MAX8907 is not set # CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_MAX8997 is not set # CONFIG_MFD_MAX8998 is not set # CONFIG_MFD_MT6397 is not set # CONFIG_MFD_MENF21BMC is not set # CONFIG_EZX_PCAP is not set CONFIG_MFD_VIPERBOARD=m # CONFIG_MFD_RETU is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_UCB1400_CORE is not set # CONFIG_MFD_RDC321X is not set CONFIG_MFD_RTSX_PCI=m # CONFIG_MFD_RT5033 is not set # CONFIG_MFD_RTSX_USB is not set # CONFIG_MFD_RC5T583 is not set # CONFIG_MFD_SEC_CORE is not set # CONFIG_MFD_SI476X_CORE is not set CONFIG_MFD_SM501=m # CONFIG_MFD_SM501_GPIO is not set # CONFIG_MFD_SKY81452 is not set # CONFIG_MFD_SMSC is not set # CONFIG_ABX500_CORE is not set # CONFIG_MFD_SYSCON is not set # CONFIG_MFD_TI_AM335X_TSCADC is not set # CONFIG_MFD_LP3943 is not set # CONFIG_MFD_LP8788 is not set # CONFIG_MFD_TI_LMU is not set # CONFIG_MFD_PALMAS is not set # CONFIG_TPS6105X is not set # CONFIG_TPS65010 is not set # CONFIG_TPS6507X is not set # CONFIG_MFD_TPS65086 is not set # CONFIG_MFD_TPS65090 is not set # CONFIG_MFD_TPS65217 is not set # CONFIG_MFD_TI_LP873X is not set # CONFIG_MFD_TPS65218 is not set # CONFIG_MFD_TPS6586X is not set # CONFIG_MFD_TPS65910 is not set # CONFIG_MFD_TPS65912_I2C is not set # CONFIG_MFD_TPS65912_SPI is not set # CONFIG_MFD_TPS80031 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_TWL6040_CORE is not set # CONFIG_MFD_WL1273_CORE is not set # CONFIG_MFD_LM3533 is not set # CONFIG_MFD_TMIO is not set CONFIG_MFD_VX855=m # CONFIG_MFD_ARIZONA_I2C is not set # CONFIG_MFD_ARIZONA_SPI is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X_I2C is not set # CONFIG_MFD_WM831X_SPI is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_REGULATOR is not set CONFIG_MEDIA_SUPPORT=m # # Multimedia core support # CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_ANALOG_TV_SUPPORT=y CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y CONFIG_MEDIA_RADIO_SUPPORT=y # CONFIG_MEDIA_SDR_SUPPORT is not set CONFIG_MEDIA_RC_SUPPORT=y # CONFIG_MEDIA_CEC_SUPPORT is not set # CONFIG_MEDIA_CONTROLLER is not set CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2=m # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_TUNER=m CONFIG_VIDEOBUF_GEN=m CONFIG_VIDEOBUF_DMA_SG=m CONFIG_VIDEOBUF_VMALLOC=m CONFIG_VIDEOBUF_DVB=m CONFIG_VIDEOBUF2_CORE=m CONFIG_VIDEOBUF2_MEMOPS=m CONFIG_VIDEOBUF2_VMALLOC=m CONFIG_VIDEOBUF2_DMA_SG=m CONFIG_VIDEOBUF2_DVB=m CONFIG_DVB_CORE=m CONFIG_DVB_NET=y CONFIG_TTPCI_EEPROM=m CONFIG_DVB_MAX_ADAPTERS=8 CONFIG_DVB_DYNAMIC_MINORS=y # CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set # # Media drivers # CONFIG_RC_CORE=m CONFIG_RC_MAP=m CONFIG_RC_DECODERS=y CONFIG_LIRC=m CONFIG_IR_LIRC_CODEC=m CONFIG_IR_NEC_DECODER=m CONFIG_IR_RC5_DECODER=m CONFIG_IR_RC6_DECODER=m CONFIG_IR_JVC_DECODER=m CONFIG_IR_SONY_DECODER=m CONFIG_IR_SANYO_DECODER=m CONFIG_IR_SHARP_DECODER=m CONFIG_IR_MCE_KBD_DECODER=m CONFIG_IR_XMP_DECODER=m CONFIG_RC_DEVICES=y CONFIG_RC_ATI_REMOTE=m CONFIG_IR_ENE=m # CONFIG_IR_HIX5HD2 is not set CONFIG_IR_IMON=m CONFIG_IR_MCEUSB=m CONFIG_IR_ITE_CIR=m CONFIG_IR_FINTEK=m CONFIG_IR_NUVOTON=m CONFIG_IR_REDRAT3=m # CONFIG_IR_SPI is not set CONFIG_IR_STREAMZAP=m CONFIG_IR_WINBOND_CIR=m # CONFIG_IR_IGORPLUGUSB is not set CONFIG_IR_IGUANA=m CONFIG_IR_TTUSBIR=m # CONFIG_RC_LOOPBACK is not set CONFIG_IR_GPIO_CIR=m # CONFIG_IR_SERIAL is not set # CONFIG_IR_SIR is not set CONFIG_MEDIA_USB_SUPPORT=y # # Webcam devices # CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m CONFIG_USB_M5602=m CONFIG_USB_STV06XX=m CONFIG_USB_GL860=m CONFIG_USB_GSPCA_BENQ=m CONFIG_USB_GSPCA_CONEX=m CONFIG_USB_GSPCA_CPIA1=m # CONFIG_USB_GSPCA_DTCS033 is not set CONFIG_USB_GSPCA_ETOMS=m CONFIG_USB_GSPCA_FINEPIX=m CONFIG_USB_GSPCA_JEILINJ=m CONFIG_USB_GSPCA_JL2005BCD=m # CONFIG_USB_GSPCA_KINECT is not set CONFIG_USB_GSPCA_KONICA=m CONFIG_USB_GSPCA_MARS=m CONFIG_USB_GSPCA_MR97310A=m CONFIG_USB_GSPCA_NW80X=m CONFIG_USB_GSPCA_OV519=m CONFIG_USB_GSPCA_OV534=m CONFIG_USB_GSPCA_OV534_9=m CONFIG_USB_GSPCA_PAC207=m CONFIG_USB_GSPCA_PAC7302=m CONFIG_USB_GSPCA_PAC7311=m CONFIG_USB_GSPCA_SE401=m CONFIG_USB_GSPCA_SN9C2028=m CONFIG_USB_GSPCA_SN9C20X=m CONFIG_USB_GSPCA_SONIXB=m CONFIG_USB_GSPCA_SONIXJ=m CONFIG_USB_GSPCA_SPCA500=m CONFIG_USB_GSPCA_SPCA501=m CONFIG_USB_GSPCA_SPCA505=m CONFIG_USB_GSPCA_SPCA506=m CONFIG_USB_GSPCA_SPCA508=m CONFIG_USB_GSPCA_SPCA561=m CONFIG_USB_GSPCA_SPCA1528=m CONFIG_USB_GSPCA_SQ905=m CONFIG_USB_GSPCA_SQ905C=m CONFIG_USB_GSPCA_SQ930X=m CONFIG_USB_GSPCA_STK014=m # CONFIG_USB_GSPCA_STK1135 is not set CONFIG_USB_GSPCA_STV0680=m CONFIG_USB_GSPCA_SUNPLUS=m CONFIG_USB_GSPCA_T613=m CONFIG_USB_GSPCA_TOPRO=m # CONFIG_USB_GSPCA_TOUPTEK is not set CONFIG_USB_GSPCA_TV8532=m CONFIG_USB_GSPCA_VC032X=m CONFIG_USB_GSPCA_VICAM=m CONFIG_USB_GSPCA_XIRLINK_CIT=m CONFIG_USB_GSPCA_ZC3XX=m CONFIG_USB_PWC=m # CONFIG_USB_PWC_DEBUG is not set CONFIG_USB_PWC_INPUT_EVDEV=y # CONFIG_VIDEO_CPIA2 is not set CONFIG_USB_ZR364XX=m CONFIG_USB_STKWEBCAM=m CONFIG_USB_S2255=m # CONFIG_VIDEO_USBTV is not set # # Analog TV USB devices # CONFIG_VIDEO_PVRUSB2=m CONFIG_VIDEO_PVRUSB2_SYSFS=y CONFIG_VIDEO_PVRUSB2_DVB=y # CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set CONFIG_VIDEO_HDPVR=m CONFIG_VIDEO_USBVISION=m # CONFIG_VIDEO_STK1160_COMMON is not set # CONFIG_VIDEO_GO7007 is not set # # Analog/digital TV USB devices # CONFIG_VIDEO_AU0828=m CONFIG_VIDEO_AU0828_V4L2=y # CONFIG_VIDEO_AU0828_RC is not set CONFIG_VIDEO_CX231XX=m CONFIG_VIDEO_CX231XX_RC=y CONFIG_VIDEO_CX231XX_ALSA=m CONFIG_VIDEO_CX231XX_DVB=m CONFIG_VIDEO_TM6000=m CONFIG_VIDEO_TM6000_ALSA=m CONFIG_VIDEO_TM6000_DVB=m # # Digital TV USB devices # CONFIG_DVB_USB=m # CONFIG_DVB_USB_DEBUG is not set CONFIG_DVB_USB_DIB3000MC=m CONFIG_DVB_USB_A800=m CONFIG_DVB_USB_DIBUSB_MB=m # CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set CONFIG_DVB_USB_DIBUSB_MC=m CONFIG_DVB_USB_DIB0700=m CONFIG_DVB_USB_UMT_010=m CONFIG_DVB_USB_CXUSB=m CONFIG_DVB_USB_M920X=m CONFIG_DVB_USB_DIGITV=m CONFIG_DVB_USB_VP7045=m CONFIG_DVB_USB_VP702X=m CONFIG_DVB_USB_GP8PSK=m CONFIG_DVB_USB_NOVA_T_USB2=m CONFIG_DVB_USB_TTUSB2=m CONFIG_DVB_USB_DTT200U=m CONFIG_DVB_USB_OPERA1=m CONFIG_DVB_USB_AF9005=m CONFIG_DVB_USB_AF9005_REMOTE=m CONFIG_DVB_USB_PCTV452E=m CONFIG_DVB_USB_DW2102=m CONFIG_DVB_USB_CINERGY_T2=m CONFIG_DVB_USB_DTV5100=m CONFIG_DVB_USB_FRIIO=m CONFIG_DVB_USB_AZ6027=m CONFIG_DVB_USB_TECHNISAT_USB2=m CONFIG_DVB_USB_V2=m CONFIG_DVB_USB_AF9015=m CONFIG_DVB_USB_AF9035=m CONFIG_DVB_USB_ANYSEE=m CONFIG_DVB_USB_AU6610=m CONFIG_DVB_USB_AZ6007=m CONFIG_DVB_USB_CE6230=m CONFIG_DVB_USB_EC168=m CONFIG_DVB_USB_GL861=m CONFIG_DVB_USB_LME2510=m CONFIG_DVB_USB_MXL111SF=m CONFIG_DVB_USB_RTL28XXU=m # CONFIG_DVB_USB_DVBSKY is not set # CONFIG_DVB_USB_ZD1301 is not set CONFIG_DVB_TTUSB_BUDGET=m CONFIG_DVB_TTUSB_DEC=m CONFIG_SMS_USB_DRV=m CONFIG_DVB_B2C2_FLEXCOP_USB=m # CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set # CONFIG_DVB_AS102 is not set # # Webcam, TV (analog/digital) USB devices # CONFIG_VIDEO_EM28XX=m # CONFIG_VIDEO_EM28XX_V4L2 is not set CONFIG_VIDEO_EM28XX_ALSA=m CONFIG_VIDEO_EM28XX_DVB=m CONFIG_VIDEO_EM28XX_RC=m CONFIG_MEDIA_PCI_SUPPORT=y # # Media capture support # # CONFIG_VIDEO_MEYE is not set # CONFIG_VIDEO_SOLO6X10 is not set # CONFIG_VIDEO_TW5864 is not set # CONFIG_VIDEO_TW68 is not set # CONFIG_VIDEO_TW686X is not set # CONFIG_VIDEO_ZORAN is not set # # Media capture/analog TV support # CONFIG_VIDEO_IVTV=m # CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set # CONFIG_VIDEO_IVTV_ALSA is not set CONFIG_VIDEO_FB_IVTV=m # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_DT3155 is not set # # Media capture/analog/hybrid TV support # CONFIG_VIDEO_CX18=m CONFIG_VIDEO_CX18_ALSA=m CONFIG_VIDEO_CX23885=m CONFIG_MEDIA_ALTERA_CI=m # CONFIG_VIDEO_CX25821 is not set CONFIG_VIDEO_CX88=m CONFIG_VIDEO_CX88_ALSA=m CONFIG_VIDEO_CX88_BLACKBIRD=m CONFIG_VIDEO_CX88_DVB=m CONFIG_VIDEO_CX88_ENABLE_VP3054=y CONFIG_VIDEO_CX88_VP3054=m CONFIG_VIDEO_CX88_MPEG=m CONFIG_VIDEO_BT848=m CONFIG_DVB_BT8XX=m CONFIG_VIDEO_SAA7134=m CONFIG_VIDEO_SAA7134_ALSA=m CONFIG_VIDEO_SAA7134_RC=y CONFIG_VIDEO_SAA7134_DVB=m CONFIG_VIDEO_SAA7164=m # # Media digital TV PCI Adapters # CONFIG_DVB_AV7110_IR=y CONFIG_DVB_AV7110=m CONFIG_DVB_AV7110_OSD=y CONFIG_DVB_BUDGET_CORE=m CONFIG_DVB_BUDGET=m CONFIG_DVB_BUDGET_CI=m CONFIG_DVB_BUDGET_AV=m CONFIG_DVB_BUDGET_PATCH=m CONFIG_DVB_B2C2_FLEXCOP_PCI=m # CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set CONFIG_DVB_PLUTO2=m CONFIG_DVB_DM1105=m CONFIG_DVB_PT1=m # CONFIG_DVB_PT3 is not set CONFIG_MANTIS_CORE=m CONFIG_DVB_MANTIS=m CONFIG_DVB_HOPPER=m CONFIG_DVB_NGENE=m CONFIG_DVB_DDBRIDGE=m # CONFIG_DVB_SMIPCIE is not set # CONFIG_DVB_NETUP_UNIDVB is not set # CONFIG_V4L_PLATFORM_DRIVERS is not set # CONFIG_V4L_MEM2MEM_DRIVERS is not set # CONFIG_V4L_TEST_DRIVERS is not set # CONFIG_DVB_PLATFORM_DRIVERS is not set # # Supported MMC/SDIO adapters # CONFIG_SMS_SDIO_DRV=m CONFIG_RADIO_ADAPTERS=y CONFIG_RADIO_TEA575X=m # CONFIG_RADIO_SI470X is not set # CONFIG_RADIO_SI4713 is not set # CONFIG_USB_MR800 is not set # CONFIG_USB_DSBR is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_SHARK is not set # CONFIG_RADIO_SHARK2 is not set # CONFIG_USB_KEENE is not set # CONFIG_USB_RAREMONO is not set # CONFIG_USB_MA901 is not set # CONFIG_RADIO_TEA5764 is not set # CONFIG_RADIO_SAA7706H is not set # CONFIG_RADIO_TEF6862 is not set # CONFIG_RADIO_WL1273 is not set # # Texas Instruments WL128x FM driver (ST based) # # # Supported FireWire (IEEE 1394) Adapters # CONFIG_DVB_FIREDTV=m CONFIG_DVB_FIREDTV_INPUT=y CONFIG_MEDIA_COMMON_OPTIONS=y # # common driver options # CONFIG_VIDEO_CX2341X=m CONFIG_VIDEO_TVEEPROM=m CONFIG_CYPRESS_FIRMWARE=m CONFIG_DVB_B2C2_FLEXCOP=m CONFIG_VIDEO_SAA7146=m CONFIG_VIDEO_SAA7146_VV=m CONFIG_SMS_SIANO_MDTV=m CONFIG_SMS_SIANO_RC=y # CONFIG_SMS_SIANO_DEBUGFS is not set # # Media ancillary drivers (tuners, sensors, i2c, spi, frontends) # CONFIG_MEDIA_SUBDRV_AUTOSELECT=y CONFIG_MEDIA_ATTACH=y CONFIG_VIDEO_IR_I2C=m # # Audio decoders, processors and mixers # CONFIG_VIDEO_TVAUDIO=m CONFIG_VIDEO_TDA7432=m CONFIG_VIDEO_MSP3400=m CONFIG_VIDEO_CS3308=m CONFIG_VIDEO_CS5345=m CONFIG_VIDEO_CS53L32A=m CONFIG_VIDEO_WM8775=m CONFIG_VIDEO_WM8739=m CONFIG_VIDEO_VP27SMPX=m # # RDS decoders # CONFIG_VIDEO_SAA6588=m # # Video decoders # CONFIG_VIDEO_SAA711X=m # # Video and audio decoders # CONFIG_VIDEO_SAA717X=m CONFIG_VIDEO_CX25840=m # # Video encoders # CONFIG_VIDEO_SAA7127=m # # Camera sensor devices # # # Flash devices # # # Video improvement chips # CONFIG_VIDEO_UPD64031A=m CONFIG_VIDEO_UPD64083=m # # Audio/Video compression chips # CONFIG_VIDEO_SAA6752HS=m # # SDR tuner chips # # # Miscellaneous helper chips # CONFIG_VIDEO_M52790=m # # Sensors used on soc_camera driver # CONFIG_MEDIA_TUNER=m CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA827X=m CONFIG_MEDIA_TUNER_TDA18271=m CONFIG_MEDIA_TUNER_TDA9887=m CONFIG_MEDIA_TUNER_TEA5761=m CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_MT2060=m CONFIG_MEDIA_TUNER_MT2063=m CONFIG_MEDIA_TUNER_MT2266=m CONFIG_MEDIA_TUNER_MT2131=m CONFIG_MEDIA_TUNER_QT1010=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m CONFIG_MEDIA_TUNER_XC4000=m CONFIG_MEDIA_TUNER_MXL5005S=m CONFIG_MEDIA_TUNER_MXL5007T=m CONFIG_MEDIA_TUNER_MC44S803=m CONFIG_MEDIA_TUNER_MAX2165=m CONFIG_MEDIA_TUNER_TDA18218=m CONFIG_MEDIA_TUNER_FC0011=m CONFIG_MEDIA_TUNER_FC0012=m CONFIG_MEDIA_TUNER_FC0013=m CONFIG_MEDIA_TUNER_TDA18212=m CONFIG_MEDIA_TUNER_E4000=m CONFIG_MEDIA_TUNER_FC2580=m CONFIG_MEDIA_TUNER_M88RS6000T=m CONFIG_MEDIA_TUNER_TUA9001=m CONFIG_MEDIA_TUNER_SI2157=m CONFIG_MEDIA_TUNER_IT913X=m CONFIG_MEDIA_TUNER_R820T=m CONFIG_MEDIA_TUNER_QM1D1C0042=m # # Multistandard (satellite) frontends # CONFIG_DVB_STB0899=m CONFIG_DVB_STB6100=m CONFIG_DVB_STV090x=m CONFIG_DVB_STV6110x=m CONFIG_DVB_M88DS3103=m # # Multistandard (cable + terrestrial) frontends # CONFIG_DVB_DRXK=m CONFIG_DVB_TDA18271C2DD=m CONFIG_DVB_SI2165=m CONFIG_DVB_MN88472=m CONFIG_DVB_MN88473=m # # DVB-S (satellite) frontends # CONFIG_DVB_CX24110=m CONFIG_DVB_CX24123=m CONFIG_DVB_MT312=m CONFIG_DVB_ZL10036=m CONFIG_DVB_ZL10039=m CONFIG_DVB_S5H1420=m CONFIG_DVB_STV0288=m CONFIG_DVB_STB6000=m CONFIG_DVB_STV0299=m CONFIG_DVB_STV6110=m CONFIG_DVB_STV0900=m CONFIG_DVB_TDA8083=m CONFIG_DVB_TDA10086=m CONFIG_DVB_TDA8261=m CONFIG_DVB_VES1X93=m CONFIG_DVB_TUNER_ITD1000=m CONFIG_DVB_TUNER_CX24113=m CONFIG_DVB_TDA826X=m CONFIG_DVB_TUA6100=m CONFIG_DVB_CX24116=m CONFIG_DVB_CX24117=m CONFIG_DVB_CX24120=m CONFIG_DVB_SI21XX=m CONFIG_DVB_TS2020=m CONFIG_DVB_DS3000=m CONFIG_DVB_MB86A16=m CONFIG_DVB_TDA10071=m # # DVB-T (terrestrial) frontends # CONFIG_DVB_SP8870=m CONFIG_DVB_SP887X=m CONFIG_DVB_CX22700=m CONFIG_DVB_CX22702=m CONFIG_DVB_DRXD=m CONFIG_DVB_L64781=m CONFIG_DVB_TDA1004X=m CONFIG_DVB_NXT6000=m CONFIG_DVB_MT352=m CONFIG_DVB_ZL10353=m CONFIG_DVB_DIB3000MB=m CONFIG_DVB_DIB3000MC=m CONFIG_DVB_DIB7000M=m CONFIG_DVB_DIB7000P=m CONFIG_DVB_TDA10048=m CONFIG_DVB_AF9013=m CONFIG_DVB_EC100=m CONFIG_DVB_STV0367=m CONFIG_DVB_CXD2820R=m CONFIG_DVB_CXD2841ER=m CONFIG_DVB_RTL2830=m CONFIG_DVB_RTL2832=m CONFIG_DVB_SI2168=m # CONFIG_DVB_AS102_FE is not set CONFIG_DVB_GP8PSK_FE=m # # DVB-C (cable) frontends # CONFIG_DVB_VES1820=m CONFIG_DVB_TDA10021=m CONFIG_DVB_TDA10023=m CONFIG_DVB_STV0297=m # # ATSC (North American/Korean Terrestrial/Cable DTV) frontends # CONFIG_DVB_NXT200X=m CONFIG_DVB_OR51211=m CONFIG_DVB_OR51132=m CONFIG_DVB_BCM3510=m CONFIG_DVB_LGDT330X=m CONFIG_DVB_LGDT3305=m CONFIG_DVB_LGDT3306A=m CONFIG_DVB_LG2160=m CONFIG_DVB_S5H1409=m CONFIG_DVB_AU8522=m CONFIG_DVB_AU8522_DTV=m CONFIG_DVB_AU8522_V4L=m CONFIG_DVB_S5H1411=m # # ISDB-T (terrestrial) frontends # CONFIG_DVB_S921=m CONFIG_DVB_DIB8000=m CONFIG_DVB_MB86A20S=m # # ISDB-S (satellite) & ISDB-T (terrestrial) frontends # CONFIG_DVB_TC90522=m # # Digital terrestrial only tuners/PLL # CONFIG_DVB_PLL=m CONFIG_DVB_TUNER_DIB0070=m CONFIG_DVB_TUNER_DIB0090=m # # SEC control devices for DVB-S # CONFIG_DVB_DRX39XYJ=m CONFIG_DVB_LNBP21=m CONFIG_DVB_LNBP22=m CONFIG_DVB_ISL6405=m CONFIG_DVB_ISL6421=m CONFIG_DVB_ISL6423=m CONFIG_DVB_A8293=m CONFIG_DVB_LGS8GXX=m CONFIG_DVB_ATBM8830=m CONFIG_DVB_TDA665x=m CONFIG_DVB_IX2505V=m CONFIG_DVB_M88RS2000=m CONFIG_DVB_AF9033=m # # Tools to develop new frontends # # CONFIG_DVB_DUMMY_FE is not set # # Graphics support # CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y CONFIG_AGP_SIS=y CONFIG_AGP_VIA=y CONFIG_INTEL_GTT=y CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=64 CONFIG_VGA_SWITCHEROO=y CONFIG_DRM=m CONFIG_DRM_MIPI_DSI=y # CONFIG_DRM_DP_AUX_CHARDEV is not set # CONFIG_DRM_DEBUG_MM_SELFTEST is not set CONFIG_DRM_KMS_HELPER=m CONFIG_DRM_KMS_FB_HELPER=y CONFIG_DRM_FBDEV_EMULATION=y CONFIG_DRM_FBDEV_OVERALLOC=100 CONFIG_DRM_LOAD_EDID_FIRMWARE=y CONFIG_DRM_TTM=m # # I2C encoder or helper chips # CONFIG_DRM_I2C_CH7006=m CONFIG_DRM_I2C_SIL164=m CONFIG_DRM_I2C_NXP_TDA998X=m # CONFIG_DRM_RADEON is not set # CONFIG_DRM_AMDGPU is not set # # ACP (Audio CoProcessor) Configuration # # CONFIG_DRM_NOUVEAU is not set CONFIG_DRM_I915=m # CONFIG_DRM_I915_ALPHA_SUPPORT is not set CONFIG_DRM_I915_CAPTURE_ERROR=y CONFIG_DRM_I915_COMPRESS_ERROR=y CONFIG_DRM_I915_USERPTR=y # CONFIG_DRM_I915_GVT is not set # # drm/i915 Debugging # # CONFIG_DRM_I915_WERROR is not set # CONFIG_DRM_I915_DEBUG is not set # CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set # CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set # CONFIG_DRM_I915_SELFTEST is not set # CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set # CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set CONFIG_DRM_VGEM=m CONFIG_DRM_VMWGFX=m CONFIG_DRM_VMWGFX_FBCON=y CONFIG_DRM_GMA500=m CONFIG_DRM_GMA600=y CONFIG_DRM_GMA3600=y CONFIG_DRM_UDL=m CONFIG_DRM_AST=m CONFIG_DRM_MGAG200=m CONFIG_DRM_CIRRUS_QEMU=m CONFIG_DRM_QXL=m # CONFIG_DRM_BOCHS is not set # CONFIG_DRM_VIRTIO_GPU is not set CONFIG_DRM_PANEL=y # # Display Panels # CONFIG_DRM_BRIDGE=y CONFIG_DRM_PANEL_BRIDGE=y # # Display Interface Bridges # # CONFIG_DRM_ANALOGIX_ANX78XX is not set # CONFIG_DRM_HISI_HIBMC is not set # CONFIG_DRM_TINYDRM is not set # CONFIG_DRM_LEGACY is not set # CONFIG_DRM_LIB_RANDOM is not set # # Frame buffer Devices # CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set CONFIG_FB_CMDLINE=y CONFIG_FB_NOTIFY=y # CONFIG_FB_DDC is not set CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set CONFIG_FB_SYS_FILLRECT=m CONFIG_FB_SYS_COPYAREA=m CONFIG_FB_SYS_IMAGEBLIT=m # CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set # CONFIG_FB_FOREIGN_ENDIAN is not set CONFIG_FB_SYS_FOPS=m CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_UVESA is not set CONFIG_FB_VESA=y CONFIG_FB_EFI=y # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_OPENCORES is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I740 is not set # CONFIG_FB_LE80578 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_SM501 is not set # CONFIG_FB_SMSCUFX is not set # CONFIG_FB_UDL is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_XEN_FBDEV_FRONTEND is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set # CONFIG_FB_AUO_K190X is not set CONFIG_FB_HYPERV=m # CONFIG_FB_SIMPLE is not set # CONFIG_FB_SM712 is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_L4F00242T03 is not set # CONFIG_LCD_LMS283GF05 is not set # CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_ILI922X is not set # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_TDO24M is not set # CONFIG_LCD_VGG2432A4 is not set CONFIG_LCD_PLATFORM=m # CONFIG_LCD_S6E63M0 is not set # CONFIG_LCD_LD9040 is not set # CONFIG_LCD_AMS369FG06 is not set # CONFIG_LCD_LMS501KF03 is not set # CONFIG_LCD_HX8357 is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set # CONFIG_BACKLIGHT_PWM is not set CONFIG_BACKLIGHT_APPLE=m # CONFIG_BACKLIGHT_PM8941_WLED is not set # CONFIG_BACKLIGHT_SAHARA is not set # CONFIG_BACKLIGHT_ADP8860 is not set # CONFIG_BACKLIGHT_ADP8870 is not set # CONFIG_BACKLIGHT_LM3630A is not set # CONFIG_BACKLIGHT_LM3639 is not set # CONFIG_BACKLIGHT_LP855X is not set # CONFIG_BACKLIGHT_GPIO is not set # CONFIG_BACKLIGHT_LV5207LP is not set # CONFIG_BACKLIGHT_BD6107 is not set # CONFIG_BACKLIGHT_ARCXCNN is not set # CONFIG_VGASTATE is not set CONFIG_HDMI=y # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 # CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=80 CONFIG_DUMMY_CONSOLE_ROWS=25 CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m CONFIG_SOUND_OSS_CORE=y CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_SEQ_DEVICE=m CONFIG_SND_RAWMIDI=m CONFIG_SND_JACK=y CONFIG_SND_JACK_INPUT_DEV=y CONFIG_SND_OSSEMUL=y # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set CONFIG_SND_PCM_TIMER=y CONFIG_SND_HRTIMER=m CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_MAX_CARDS=32 # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_PROC_FS=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_DMA_SGBUF=y CONFIG_SND_SEQUENCER=m CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_SEQUENCER_OSS=m CONFIG_SND_SEQ_HRTIMER_DEFAULT=y CONFIG_SND_SEQ_MIDI_EVENT=m CONFIG_SND_SEQ_MIDI_EMUL=m CONFIG_SND_SEQ_VIRMIDI=m CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_OPL3_LIB_SEQ=m # CONFIG_SND_OPL4_LIB_SEQ is not set CONFIG_SND_VX_LIB=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_DRIVERS=y CONFIG_SND_PCSP=m CONFIG_SND_DUMMY=m CONFIG_SND_ALOOP=m CONFIG_SND_VIRMIDI=m CONFIG_SND_MTPAV=m # CONFIG_SND_MTS64 is not set # CONFIG_SND_SERIAL_U16550 is not set CONFIG_SND_MPU401=m # CONFIG_SND_PORTMAN2X4 is not set CONFIG_SND_AC97_POWER_SAVE=y CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5 CONFIG_SND_PCI=y CONFIG_SND_AD1889=m # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set CONFIG_SND_ALI5451=m CONFIG_SND_ASIHPI=m CONFIG_SND_ATIIXP=m CONFIG_SND_ATIIXP_MODEM=m CONFIG_SND_AU8810=m CONFIG_SND_AU8820=m CONFIG_SND_AU8830=m # CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set CONFIG_SND_BT87X=m # CONFIG_SND_BT87X_OVERCLOCK is not set CONFIG_SND_CA0106=m CONFIG_SND_CMIPCI=m CONFIG_SND_OXYGEN_LIB=m CONFIG_SND_OXYGEN=m # CONFIG_SND_CS4281 is not set CONFIG_SND_CS46XX=m CONFIG_SND_CS46XX_NEW_DSP=y CONFIG_SND_CTXFI=m CONFIG_SND_DARLA20=m CONFIG_SND_GINA20=m CONFIG_SND_LAYLA20=m CONFIG_SND_DARLA24=m CONFIG_SND_GINA24=m CONFIG_SND_LAYLA24=m CONFIG_SND_MONA=m CONFIG_SND_MIA=m CONFIG_SND_ECHO3G=m CONFIG_SND_INDIGO=m CONFIG_SND_INDIGOIO=m CONFIG_SND_INDIGODJ=m CONFIG_SND_INDIGOIOX=m CONFIG_SND_INDIGODJX=m CONFIG_SND_EMU10K1=m CONFIG_SND_EMU10K1_SEQ=m CONFIG_SND_EMU10K1X=m CONFIG_SND_ENS1370=m CONFIG_SND_ENS1371=m # CONFIG_SND_ES1938 is not set CONFIG_SND_ES1968=m CONFIG_SND_ES1968_INPUT=y CONFIG_SND_ES1968_RADIO=y # CONFIG_SND_FM801 is not set CONFIG_SND_HDSP=m CONFIG_SND_HDSPM=m CONFIG_SND_ICE1712=m CONFIG_SND_ICE1724=m CONFIG_SND_INTEL8X0=m CONFIG_SND_INTEL8X0M=m CONFIG_SND_KORG1212=m CONFIG_SND_LOLA=m CONFIG_SND_LX6464ES=m CONFIG_SND_MAESTRO3=m CONFIG_SND_MAESTRO3_INPUT=y CONFIG_SND_MIXART=m # CONFIG_SND_NM256 is not set CONFIG_SND_PCXHR=m # CONFIG_SND_RIPTIDE is not set CONFIG_SND_RME32=m CONFIG_SND_RME96=m CONFIG_SND_RME9652=m # CONFIG_SND_SONICVIBES is not set CONFIG_SND_TRIDENT=m CONFIG_SND_VIA82XX=m CONFIG_SND_VIA82XX_MODEM=m CONFIG_SND_VIRTUOSO=m CONFIG_SND_VX222=m # CONFIG_SND_YMFPCI is not set # # HD-Audio # CONFIG_SND_HDA=m CONFIG_SND_HDA_INTEL=m CONFIG_SND_HDA_HWDEP=y # CONFIG_SND_HDA_RECONFIG is not set CONFIG_SND_HDA_INPUT_BEEP=y CONFIG_SND_HDA_INPUT_BEEP_MODE=0 # CONFIG_SND_HDA_PATCH_LOADER is not set CONFIG_SND_HDA_CODEC_REALTEK=m CONFIG_SND_HDA_CODEC_ANALOG=m CONFIG_SND_HDA_CODEC_SIGMATEL=m CONFIG_SND_HDA_CODEC_VIA=m CONFIG_SND_HDA_CODEC_HDMI=m CONFIG_SND_HDA_CODEC_CIRRUS=m CONFIG_SND_HDA_CODEC_CONEXANT=m CONFIG_SND_HDA_CODEC_CA0110=m CONFIG_SND_HDA_CODEC_CA0132=m CONFIG_SND_HDA_CODEC_CA0132_DSP=y CONFIG_SND_HDA_CODEC_CMEDIA=m CONFIG_SND_HDA_CODEC_SI3054=m CONFIG_SND_HDA_GENERIC=m CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 CONFIG_SND_HDA_CORE=m CONFIG_SND_HDA_DSP_LOADER=y CONFIG_SND_HDA_I915=y CONFIG_SND_HDA_PREALLOC_SIZE=512 CONFIG_SND_SPI=y CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m CONFIG_SND_USB_UA101=m CONFIG_SND_USB_USX2Y=m CONFIG_SND_USB_CAIAQ=m CONFIG_SND_USB_CAIAQ_INPUT=y CONFIG_SND_USB_US122L=m CONFIG_SND_USB_6FIRE=m # CONFIG_SND_USB_HIFACE is not set # CONFIG_SND_BCD2000 is not set # CONFIG_SND_USB_POD is not set # CONFIG_SND_USB_PODHD is not set # CONFIG_SND_USB_TONEPORT is not set # CONFIG_SND_USB_VARIAX is not set CONFIG_SND_FIREWIRE=y CONFIG_SND_FIREWIRE_LIB=m # CONFIG_SND_DICE is not set # CONFIG_SND_OXFW is not set CONFIG_SND_ISIGHT=m # CONFIG_SND_FIREWORKS is not set # CONFIG_SND_BEBOB is not set # CONFIG_SND_FIREWIRE_DIGI00X is not set # CONFIG_SND_FIREWIRE_TASCAM is not set # CONFIG_SND_FIREWIRE_MOTU is not set # CONFIG_SND_FIREFACE is not set # CONFIG_SND_SOC is not set CONFIG_SND_X86=y # CONFIG_HDMI_LPE_AUDIO is not set CONFIG_SND_SYNTH_EMUX=m CONFIG_AC97_BUS=m # # HID support # CONFIG_HID=y CONFIG_HID_BATTERY_STRENGTH=y CONFIG_HIDRAW=y CONFIG_UHID=m CONFIG_HID_GENERIC=y # # Special HID drivers # CONFIG_HID_A4TECH=y # CONFIG_HID_ACCUTOUCH is not set CONFIG_HID_ACRUX=m # CONFIG_HID_ACRUX_FF is not set CONFIG_HID_APPLE=y CONFIG_HID_APPLEIR=m # CONFIG_HID_ASUS is not set CONFIG_HID_AUREAL=m CONFIG_HID_BELKIN=y # CONFIG_HID_BETOP_FF is not set CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y # CONFIG_HID_CORSAIR is not set CONFIG_HID_PRODIKEYS=m # CONFIG_HID_CMEDIA is not set # CONFIG_HID_CP2112 is not set CONFIG_HID_CYPRESS=y CONFIG_HID_DRAGONRISE=m # CONFIG_DRAGONRISE_FF is not set # CONFIG_HID_EMS_FF is not set CONFIG_HID_ELECOM=m # CONFIG_HID_ELO is not set CONFIG_HID_EZKEY=y # CONFIG_HID_GEMBIRD is not set # CONFIG_HID_GFRM is not set CONFIG_HID_HOLTEK=m # CONFIG_HOLTEK_FF is not set # CONFIG_HID_GT683R is not set CONFIG_HID_KEYTOUCH=m CONFIG_HID_KYE=m CONFIG_HID_UCLOGIC=m CONFIG_HID_WALTOP=m CONFIG_HID_GYRATION=m CONFIG_HID_ICADE=m # CONFIG_HID_ITE is not set CONFIG_HID_TWINHAN=m CONFIG_HID_KENSINGTON=y CONFIG_HID_LCPOWER=m CONFIG_HID_LED=m # CONFIG_HID_LENOVO is not set CONFIG_HID_LOGITECH=y CONFIG_HID_LOGITECH_DJ=m CONFIG_HID_LOGITECH_HIDPP=m # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set # CONFIG_LOGIG940_FF is not set # CONFIG_LOGIWHEELS_FF is not set CONFIG_HID_MAGICMOUSE=y # CONFIG_HID_MAYFLASH is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y CONFIG_HID_MULTITOUCH=m # CONFIG_HID_NTI is not set CONFIG_HID_NTRIG=y CONFIG_HID_ORTEK=m CONFIG_HID_PANTHERLORD=m # CONFIG_PANTHERLORD_FF is not set # CONFIG_HID_PENMOUNT is not set CONFIG_HID_PETALYNX=m CONFIG_HID_PICOLCD=m CONFIG_HID_PICOLCD_FB=y CONFIG_HID_PICOLCD_BACKLIGHT=y CONFIG_HID_PICOLCD_LCD=y CONFIG_HID_PICOLCD_LEDS=y CONFIG_HID_PICOLCD_CIR=y CONFIG_HID_PLANTRONICS=y CONFIG_HID_PRIMAX=m # CONFIG_HID_RETRODE is not set CONFIG_HID_ROCCAT=m CONFIG_HID_SAITEK=m CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m # CONFIG_SONY_FF is not set CONFIG_HID_SPEEDLINK=m CONFIG_HID_STEELSERIES=m CONFIG_HID_SUNPLUS=m # CONFIG_HID_RMI is not set CONFIG_HID_GREENASIA=m # CONFIG_GREENASIA_FF is not set CONFIG_HID_HYPERV_MOUSE=m CONFIG_HID_SMARTJOYPLUS=m # CONFIG_SMARTJOYPLUS_FF is not set CONFIG_HID_TIVO=m CONFIG_HID_TOPSEED=m CONFIG_HID_THINGM=m CONFIG_HID_THRUSTMASTER=m # CONFIG_THRUSTMASTER_FF is not set # CONFIG_HID_UDRAW_PS3 is not set CONFIG_HID_WACOM=m CONFIG_HID_WIIMOTE=m # CONFIG_HID_XINMO is not set CONFIG_HID_ZEROPLUS=m # CONFIG_ZEROPLUS_FF is not set CONFIG_HID_ZYDACRON=m # CONFIG_HID_SENSOR_HUB is not set # CONFIG_HID_ALPS is not set # # USB HID support # CONFIG_USB_HID=y CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y # # I2C HID support # CONFIG_I2C_HID=m # # Intel ISH HID support # # CONFIG_INTEL_ISH_HID is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y CONFIG_USB_PCI=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEFAULT_PERSIST=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_LEDS_TRIGGER_USBPORT is not set CONFIG_USB_MON=y CONFIG_USB_WUSB=m CONFIG_USB_WUSB_CBAF=m # CONFIG_USB_WUSB_CBAF_DEBUG is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_PCI=y CONFIG_USB_XHCI_PLATFORM=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_EHCI_PCI=y # CONFIG_USB_EHCI_HCD_PLATFORM is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_FOTG210_HCD is not set # CONFIG_USB_MAX3421_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PCI=y # CONFIG_USB_OHCI_HCD_PLATFORM is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_U132_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set CONFIG_USB_HWA_HCD=m # CONFIG_USB_HCD_BCMA is not set # CONFIG_USB_HCD_SSB is not set # CONFIG_USB_HCD_TEST_MODE is not set # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_WDM=m CONFIG_USB_TMC=m # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_REALTEK=m CONFIG_REALTEK_AUTOPM=y CONFIG_USB_STORAGE_DATAFAB=m CONFIG_USB_STORAGE_FREECOM=m CONFIG_USB_STORAGE_ISD200=m CONFIG_USB_STORAGE_USBAT=m CONFIG_USB_STORAGE_SDDR09=m CONFIG_USB_STORAGE_SDDR55=m CONFIG_USB_STORAGE_JUMPSHOT=m CONFIG_USB_STORAGE_ALAUDA=m CONFIG_USB_STORAGE_ONETOUCH=m CONFIG_USB_STORAGE_KARMA=m CONFIG_USB_STORAGE_CYPRESS_ATACB=m CONFIG_USB_STORAGE_ENE_UB6250=m CONFIG_USB_UAS=m # # USB Imaging devices # CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m # CONFIG_USBIP_CORE is not set # CONFIG_USB_MUSB_HDRC is not set CONFIG_USB_DWC3=y # CONFIG_USB_DWC3_HOST is not set CONFIG_USB_DWC3_GADGET=y # CONFIG_USB_DWC3_DUAL_ROLE is not set # # Platform Glue Driver Support # CONFIG_USB_DWC3_PCI=y # CONFIG_USB_DWC2 is not set # CONFIG_USB_CHIPIDEA is not set # CONFIG_USB_ISP1760 is not set # # USB port drivers # CONFIG_USB_USS720=m CONFIG_USB_SERIAL=y CONFIG_USB_SERIAL_CONSOLE=y CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_SIMPLE is not set CONFIG_USB_SERIAL_AIRCABLE=m CONFIG_USB_SERIAL_ARK3116=m CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_CH341=m CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m CONFIG_USB_SERIAL_CP210X=m CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m CONFIG_USB_SERIAL_EDGEPORT=m CONFIG_USB_SERIAL_EDGEPORT_TI=m # CONFIG_USB_SERIAL_F81232 is not set # CONFIG_USB_SERIAL_F8153X is not set CONFIG_USB_SERIAL_GARMIN=m CONFIG_USB_SERIAL_IPW=m CONFIG_USB_SERIAL_IUU=m CONFIG_USB_SERIAL_KEYSPAN_PDA=m CONFIG_USB_SERIAL_KEYSPAN=m CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m # CONFIG_USB_SERIAL_METRO is not set CONFIG_USB_SERIAL_MOS7720=m CONFIG_USB_SERIAL_MOS7715_PARPORT=y CONFIG_USB_SERIAL_MOS7840=m # CONFIG_USB_SERIAL_MXUPORT is not set CONFIG_USB_SERIAL_NAVMAN=m CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_OTI6858=m CONFIG_USB_SERIAL_QCAUX=m CONFIG_USB_SERIAL_QUALCOMM=m CONFIG_USB_SERIAL_SPCP8X5=m CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y CONFIG_USB_SERIAL_SIERRAWIRELESS=m CONFIG_USB_SERIAL_SYMBOL=m # CONFIG_USB_SERIAL_TI is not set CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_WWAN=m CONFIG_USB_SERIAL_OPTION=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_SERIAL_OPTICON=m CONFIG_USB_SERIAL_XSENS_MT=m # CONFIG_USB_SERIAL_WISHBONE is not set CONFIG_USB_SERIAL_SSU100=m CONFIG_USB_SERIAL_QT2=m # CONFIG_USB_SERIAL_UPD78F0730 is not set CONFIG_USB_SERIAL_DEBUG=m # # USB Miscellaneous drivers # CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m CONFIG_USB_ADUTUX=m CONFIG_USB_SEVSEG=m # CONFIG_USB_RIO500 is not set CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set CONFIG_USB_IDMOUSE=m CONFIG_USB_FTDI_ELAN=m CONFIG_USB_APPLEDISPLAY=m CONFIG_USB_SISUSBVGA=m CONFIG_USB_SISUSBVGA_CON=y CONFIG_USB_LD=m # CONFIG_USB_TRANCEVIBRATOR is not set CONFIG_USB_IOWARRIOR=m # CONFIG_USB_TEST is not set # CONFIG_USB_EHSET_TEST_FIXTURE is not set CONFIG_USB_ISIGHTFW=m # CONFIG_USB_YUREX is not set CONFIG_USB_EZUSB_FX2=m # CONFIG_USB_HUB_USB251XB is not set CONFIG_USB_HSIC_USB3503=m # CONFIG_USB_HSIC_USB4604 is not set # CONFIG_USB_LINK_LAYER_TEST is not set # CONFIG_USB_CHAOSKEY is not set CONFIG_USB_ATM=m CONFIG_USB_SPEEDTOUCH=m CONFIG_USB_CXACRU=m CONFIG_USB_UEAGLEATM=m CONFIG_USB_XUSBATM=m # # USB Physical Layer drivers # CONFIG_USB_PHY=y CONFIG_NOP_USB_XCEIV=y # CONFIG_USB_GPIO_VBUS is not set # CONFIG_USB_ISP1301 is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set # CONFIG_USB_GADGET_DEBUG_FS is not set CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 # # USB Peripheral Controller # # CONFIG_USB_FOTG210_UDC is not set # CONFIG_USB_GR_UDC is not set # CONFIG_USB_R8A66597 is not set # CONFIG_USB_PXA27X is not set # CONFIG_USB_MV_UDC is not set # CONFIG_USB_MV_U3D is not set # CONFIG_USB_M66592 is not set # CONFIG_USB_BDC_UDC is not set # CONFIG_USB_AMD5536UDC is not set # CONFIG_USB_NET2272 is not set # CONFIG_USB_NET2280 is not set # CONFIG_USB_GOKU is not set # CONFIG_USB_EG20T is not set # CONFIG_USB_DUMMY_HCD is not set CONFIG_USB_LIBCOMPOSITE=m CONFIG_USB_F_MASS_STORAGE=m # CONFIG_USB_CONFIGFS is not set # CONFIG_USB_ZERO is not set # CONFIG_USB_AUDIO is not set # CONFIG_USB_ETH is not set # CONFIG_USB_G_NCM is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FUNCTIONFS is not set CONFIG_USB_MASS_STORAGE=m # CONFIG_USB_GADGET_TARGET is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set # CONFIG_USB_G_ACM_MS is not set # CONFIG_USB_G_MULTI is not set # CONFIG_USB_G_HID is not set # CONFIG_USB_G_DBGP is not set # CONFIG_USB_G_WEBCAM is not set # # USB Power Delivery and Type-C drivers # # CONFIG_TYPEC_UCSI is not set # CONFIG_USB_LED_TRIG is not set # CONFIG_USB_ULPI_BUS is not set CONFIG_UWB=m CONFIG_UWB_HWA=m CONFIG_UWB_WHCI=m CONFIG_UWB_I1480U=m CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_MINORS=8 CONFIG_SDIO_UART=m # CONFIG_MMC_TEST is not set # # MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_SDHCI=m CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=y CONFIG_MMC_SDHCI_ACPI=m CONFIG_MMC_SDHCI_PLTFM=m # CONFIG_MMC_WBSD is not set CONFIG_MMC_TIFM_SD=m # CONFIG_MMC_SPI is not set CONFIG_MMC_CB710=m CONFIG_MMC_VIA_SDMMC=m CONFIG_MMC_VUB300=m CONFIG_MMC_USHC=m # CONFIG_MMC_USDHI6ROL0 is not set CONFIG_MMC_REALTEK_PCI=m # CONFIG_MMC_TOSHIBA_PCI is not set # CONFIG_MMC_MTK is not set # CONFIG_MMC_SDHCI_XENON is not set CONFIG_MEMSTICK=m # CONFIG_MEMSTICK_DEBUG is not set # # MemoryStick drivers # # CONFIG_MEMSTICK_UNSAFE_RESUME is not set CONFIG_MSPRO_BLOCK=m # CONFIG_MS_BLOCK is not set # # MemoryStick Host Controller Drivers # CONFIG_MEMSTICK_TIFM_MS=m CONFIG_MEMSTICK_JMICRON_38X=m CONFIG_MEMSTICK_R592=m CONFIG_MEMSTICK_REALTEK_PCI=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # CONFIG_LEDS_CLASS_FLASH is not set # CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set # # LED drivers # CONFIG_LEDS_LM3530=m # CONFIG_LEDS_LM3642 is not set # CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_GPIO is not set CONFIG_LEDS_LP3944=m # CONFIG_LEDS_LP3952 is not set CONFIG_LEDS_LP55XX_COMMON=m CONFIG_LEDS_LP5521=m CONFIG_LEDS_LP5523=m CONFIG_LEDS_LP5562=m # CONFIG_LEDS_LP8501 is not set # CONFIG_LEDS_LP8860 is not set CONFIG_LEDS_CLEVO_MAIL=m # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_PCA963X is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_PWM is not set # CONFIG_LEDS_BD2802 is not set CONFIG_LEDS_INTEL_SS4200=m # CONFIG_LEDS_LT3593 is not set # CONFIG_LEDS_TCA6507 is not set # CONFIG_LEDS_TLC591XX is not set # CONFIG_LEDS_LM355x is not set # # LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) # CONFIG_LEDS_BLINKM=m # CONFIG_LEDS_MLXCPLD is not set # CONFIG_LEDS_USER is not set # CONFIG_LEDS_NIC78BX is not set # # LED Triggers # CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_ONESHOT=m # CONFIG_LEDS_TRIGGER_DISK is not set # CONFIG_LEDS_TRIGGER_MTD is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_LEDS_TRIGGER_BACKLIGHT=m # CONFIG_LEDS_TRIGGER_CPU is not set # CONFIG_LEDS_TRIGGER_GPIO is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=m # # iptables trigger is under Netfilter config (LED target) # CONFIG_LEDS_TRIGGER_TRANSIENT=m CONFIG_LEDS_TRIGGER_CAMERA=m # CONFIG_LEDS_TRIGGER_PANIC is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC_ATOMIC_SCRUB=y CONFIG_EDAC_SUPPORT=y CONFIG_EDAC=y CONFIG_EDAC_LEGACY_SYSFS=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_DECODE_MCE=m # CONFIG_EDAC_GHES is not set CONFIG_EDAC_AMD64=m # CONFIG_EDAC_AMD64_ERROR_INJECTION is not set CONFIG_EDAC_E752X=m CONFIG_EDAC_I82975X=m CONFIG_EDAC_I3000=m CONFIG_EDAC_I3200=m # CONFIG_EDAC_IE31200 is not set CONFIG_EDAC_X38=m CONFIG_EDAC_I5400=m CONFIG_EDAC_I7CORE=m CONFIG_EDAC_I5000=m CONFIG_EDAC_I5100=m CONFIG_EDAC_I7300=m CONFIG_EDAC_SBRIDGE=m # CONFIG_EDAC_SKX is not set # CONFIG_EDAC_PND2 is not set CONFIG_RTC_LIB=y CONFIG_RTC_MC146818_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_SYSTOHC is not set # CONFIG_RTC_DEBUG is not set CONFIG_RTC_NVMEM=y # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_ABB5ZES3 is not set # CONFIG_RTC_DRV_ABX80X is not set CONFIG_RTC_DRV_DS1307=m CONFIG_RTC_DRV_DS1307_HWMON=y # CONFIG_RTC_DRV_DS1307_CENTURY is not set CONFIG_RTC_DRV_DS1374=m # CONFIG_RTC_DRV_DS1374_WDT is not set CONFIG_RTC_DRV_DS1672=m CONFIG_RTC_DRV_MAX6900=m CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_ISL1208=m CONFIG_RTC_DRV_ISL12022=m CONFIG_RTC_DRV_X1205=m CONFIG_RTC_DRV_PCF8523=m # CONFIG_RTC_DRV_PCF85063 is not set CONFIG_RTC_DRV_PCF8563=m CONFIG_RTC_DRV_PCF8583=m CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_M41T80_WDT=y CONFIG_RTC_DRV_BQ32K=m # CONFIG_RTC_DRV_S35390A is not set CONFIG_RTC_DRV_FM3130=m # CONFIG_RTC_DRV_RX8010 is not set CONFIG_RTC_DRV_RX8581=m CONFIG_RTC_DRV_RX8025=m CONFIG_RTC_DRV_EM3027=m # CONFIG_RTC_DRV_RV8803 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T93 is not set # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1302 is not set # CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_DS1343 is not set # CONFIG_RTC_DRV_DS1347 is not set # CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6916 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RX4581 is not set # CONFIG_RTC_DRV_RX6110 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_PCF2123 is not set # CONFIG_RTC_DRV_MCP795 is not set CONFIG_RTC_I2C_AND_SPI=y # # SPI and I2C RTC drivers # CONFIG_RTC_DRV_DS3232=m CONFIG_RTC_DRV_DS3232_HWMON=y # CONFIG_RTC_DRV_PCF2127 is not set CONFIG_RTC_DRV_RV3029C2=m CONFIG_RTC_DRV_RV3029_HWMON=y # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y CONFIG_RTC_DRV_DS1286=m CONFIG_RTC_DRV_DS1511=m CONFIG_RTC_DRV_DS1553=m # CONFIG_RTC_DRV_DS1685_FAMILY is not set CONFIG_RTC_DRV_DS1742=m CONFIG_RTC_DRV_DS2404=m CONFIG_RTC_DRV_STK17TA8=m # CONFIG_RTC_DRV_M48T86 is not set CONFIG_RTC_DRV_M48T35=m CONFIG_RTC_DRV_M48T59=m CONFIG_RTC_DRV_MSM6242=m CONFIG_RTC_DRV_BQ4802=m CONFIG_RTC_DRV_RP5C01=m CONFIG_RTC_DRV_V3020=m # # on-CPU RTC drivers # # CONFIG_RTC_DRV_FTRTC010 is not set # # HID Sensor RTC drivers # # CONFIG_RTC_DRV_HID_SENSOR_TIME is not set CONFIG_DMADEVICES=y # CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices # CONFIG_DMA_ENGINE=y CONFIG_DMA_VIRTUAL_CHANNELS=y CONFIG_DMA_ACPI=y # CONFIG_INTEL_IDMA64 is not set # CONFIG_INTEL_IOATDMA is not set # CONFIG_QCOM_HIDMA_MGMT is not set # CONFIG_QCOM_HIDMA is not set CONFIG_DW_DMAC_CORE=y CONFIG_DW_DMAC=m CONFIG_DW_DMAC_PCI=y CONFIG_HSU_DMA=y # # DMA Clients # CONFIG_ASYNC_TX_DMA=y CONFIG_DMATEST=m CONFIG_DMA_ENGINE_RAID=y # # DMABUF options # CONFIG_SYNC_FILE=y CONFIG_SW_SYNC=y CONFIG_AUXDISPLAY=y # CONFIG_HD44780 is not set CONFIG_KS0108=m CONFIG_KS0108_PORT=0x378 CONFIG_KS0108_DELAY=2 CONFIG_CFAG12864B=m CONFIG_CFAG12864B_RATE=20 # CONFIG_IMG_ASCII_LCD is not set # CONFIG_PANEL is not set CONFIG_UIO=m CONFIG_UIO_CIF=m CONFIG_UIO_PDRV_GENIRQ=m # CONFIG_UIO_DMEM_GENIRQ is not set CONFIG_UIO_AEC=m CONFIG_UIO_SERCOS3=m CONFIG_UIO_PCI_GENERIC=m # CONFIG_UIO_NETX is not set # CONFIG_UIO_PRUSS is not set # CONFIG_UIO_MF624 is not set # CONFIG_UIO_HV_GENERIC is not set CONFIG_VFIO_IOMMU_TYPE1=m CONFIG_VFIO_VIRQFD=m CONFIG_VFIO=m # CONFIG_VFIO_NOIOMMU is not set CONFIG_VFIO_PCI=m # CONFIG_VFIO_PCI_VGA is not set CONFIG_VFIO_PCI_MMAP=y CONFIG_VFIO_PCI_INTX=y CONFIG_VFIO_PCI_IGD=y # CONFIG_VFIO_MDEV is not set CONFIG_IRQ_BYPASS_MANAGER=m # CONFIG_VIRT_DRIVERS is not set CONFIG_VIRTIO=y # # Virtio drivers # CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_PCI_LEGACY=y CONFIG_VIRTIO_BALLOON=y # CONFIG_VIRTIO_INPUT is not set # CONFIG_VIRTIO_MMIO is not set # # Microsoft Hyper-V guest support # CONFIG_HYPERV=m CONFIG_HYPERV_TSCPAGE=y CONFIG_HYPERV_UTILS=m CONFIG_HYPERV_BALLOON=m # # Xen driver support # CONFIG_XEN_BALLOON=y # CONFIG_XEN_SELFBALLOONING is not set # CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set CONFIG_XEN_SCRUB_PAGES=y CONFIG_XEN_DEV_EVTCHN=m CONFIG_XEN_BACKEND=y CONFIG_XENFS=m CONFIG_XEN_COMPAT_XENFS=y CONFIG_XEN_SYS_HYPERVISOR=y CONFIG_XEN_XENBUS_FRONTEND=y # CONFIG_XEN_GNTDEV is not set # CONFIG_XEN_GRANT_DEV_ALLOC is not set CONFIG_SWIOTLB_XEN=y CONFIG_XEN_TMEM=m CONFIG_XEN_PCIDEV_BACKEND=m # CONFIG_XEN_SCSI_BACKEND is not set CONFIG_XEN_PRIVCMD=m CONFIG_XEN_ACPI_PROCESSOR=m # CONFIG_XEN_MCE_LOG is not set CONFIG_XEN_HAVE_PVMMU=y CONFIG_XEN_EFI=y CONFIG_XEN_AUTO_XLATE=y CONFIG_XEN_ACPI=y CONFIG_XEN_SYMS=y CONFIG_XEN_HAVE_VPMU=y CONFIG_STAGING=y # CONFIG_PRISM2_USB is not set # CONFIG_COMEDI is not set # CONFIG_RTL8192U is not set CONFIG_RTLLIB=m CONFIG_RTLLIB_CRYPTO_CCMP=m CONFIG_RTLLIB_CRYPTO_TKIP=m CONFIG_RTLLIB_CRYPTO_WEP=m CONFIG_RTL8192E=m # CONFIG_RTL8723BS is not set CONFIG_R8712U=m # CONFIG_R8188EU is not set # CONFIG_RTS5208 is not set # CONFIG_VT6655 is not set # CONFIG_VT6656 is not set # CONFIG_FB_SM750 is not set # CONFIG_FB_XGI is not set # # Speakup console speech # # CONFIG_SPEAKUP is not set # CONFIG_STAGING_MEDIA is not set # # Android # # CONFIG_LTE_GDM724X is not set CONFIG_FIREWIRE_SERIAL=m CONFIG_FWTTY_MAX_TOTAL_PORTS=64 CONFIG_FWTTY_MAX_CARD_PORTS=32 # CONFIG_LNET is not set # CONFIG_DGNC is not set # CONFIG_GS_FPGABOOT is not set # CONFIG_CRYPTO_SKEIN is not set # CONFIG_UNISYSSPAR is not set # CONFIG_FB_TFT is not set # CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SPI is not set # CONFIG_MOST is not set # CONFIG_KS7010 is not set # CONFIG_GREYBUS is not set # # USB Power Delivery and Type-C drivers # # CONFIG_TYPEC_TCPM is not set # CONFIG_DRM_VBOXVIDEO is not set CONFIG_X86_PLATFORM_DEVICES=y CONFIG_ACER_WMI=m CONFIG_ACERHDF=m # CONFIG_ALIENWARE_WMI is not set CONFIG_ASUS_LAPTOP=m # CONFIG_DELL_LAPTOP is not set # CONFIG_DELL_WMI is not set CONFIG_DELL_WMI_AIO=m # CONFIG_DELL_WMI_LED is not set # CONFIG_DELL_SMO8800 is not set # CONFIG_DELL_RBTN is not set CONFIG_FUJITSU_LAPTOP=m CONFIG_FUJITSU_TABLET=m CONFIG_AMILO_RFKILL=m CONFIG_HP_ACCEL=m # CONFIG_HP_WIRELESS is not set CONFIG_HP_WMI=m CONFIG_MSI_LAPTOP=m CONFIG_PANASONIC_LAPTOP=m CONFIG_COMPAL_LAPTOP=m CONFIG_SONY_LAPTOP=m CONFIG_SONYPI_COMPAT=y CONFIG_IDEAPAD_LAPTOP=m # CONFIG_SURFACE3_WMI is not set CONFIG_THINKPAD_ACPI=m CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y # CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set # CONFIG_THINKPAD_ACPI_DEBUG is not set # CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set CONFIG_THINKPAD_ACPI_VIDEO=y CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y CONFIG_SENSORS_HDAPS=m # CONFIG_INTEL_MENLOW is not set CONFIG_EEEPC_LAPTOP=m CONFIG_ASUS_WMI=m CONFIG_ASUS_NB_WMI=m CONFIG_EEEPC_WMI=m # CONFIG_ASUS_WIRELESS is not set CONFIG_ACPI_WMI=m CONFIG_WMI_BMOF=m CONFIG_MSI_WMI=m # CONFIG_PEAQ_WMI is not set CONFIG_TOPSTAR_LAPTOP=m CONFIG_TOSHIBA_BT_RFKILL=m # CONFIG_TOSHIBA_HAPS is not set # CONFIG_TOSHIBA_WMI is not set CONFIG_ACPI_CMPC=m # CONFIG_INTEL_CHT_INT33FE is not set # CONFIG_INTEL_INT0002_VGPIO is not set # CONFIG_INTEL_HID_EVENT is not set # CONFIG_INTEL_VBTN is not set CONFIG_INTEL_IPS=m # CONFIG_INTEL_PMC_CORE is not set # CONFIG_IBM_RTL is not set CONFIG_SAMSUNG_LAPTOP=m CONFIG_MXM_WMI=m CONFIG_INTEL_OAKTRAIL=m CONFIG_SAMSUNG_Q10=m CONFIG_APPLE_GMUX=m # CONFIG_INTEL_RST is not set # CONFIG_INTEL_SMARTCONNECT is not set CONFIG_PVPANIC=y # CONFIG_INTEL_PMC_IPC is not set # CONFIG_SURFACE_PRO3_BUTTON is not set # CONFIG_INTEL_PUNIT_IPC is not set # CONFIG_MLX_PLATFORM is not set # CONFIG_MLX_CPLD_PLATFORM is not set # CONFIG_INTEL_TURBO_MAX_3 is not set CONFIG_PMC_ATOM=y # CONFIG_CHROME_PLATFORMS is not set CONFIG_CLKDEV_LOOKUP=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_COMMON_CLK=y # # Common Clock Framework # # CONFIG_COMMON_CLK_SI5351 is not set # CONFIG_COMMON_CLK_CDCE706 is not set # CONFIG_COMMON_CLK_CS2000_CP is not set # CONFIG_COMMON_CLK_NXP is not set # CONFIG_COMMON_CLK_PWM is not set # CONFIG_COMMON_CLK_PXA is not set # CONFIG_COMMON_CLK_PIC32 is not set # CONFIG_HWSPINLOCK is not set # # Clock Source drivers # CONFIG_CLKEVT_I8253=y CONFIG_I8253_LOCK=y CONFIG_CLKBLD_I8253=y # CONFIG_ATMEL_PIT is not set # CONFIG_SH_TIMER_CMT is not set # CONFIG_SH_TIMER_MTU2 is not set # CONFIG_SH_TIMER_TMU is not set # CONFIG_EM_TIMER_STI is not set CONFIG_MAILBOX=y CONFIG_PCC=y # CONFIG_ALTERA_MBOX is not set CONFIG_IOMMU_API=y CONFIG_IOMMU_SUPPORT=y # # Generic IOMMU Pagetable Support # CONFIG_IOMMU_IOVA=y CONFIG_AMD_IOMMU=y CONFIG_AMD_IOMMU_V2=m CONFIG_DMAR_TABLE=y CONFIG_INTEL_IOMMU=y # CONFIG_INTEL_IOMMU_SVM is not set # CONFIG_INTEL_IOMMU_DEFAULT_ON is not set CONFIG_INTEL_IOMMU_FLOPPY_WA=y CONFIG_IRQ_REMAP=y # # Remoteproc drivers # # CONFIG_REMOTEPROC is not set # # Rpmsg drivers # # CONFIG_RPMSG_QCOM_GLINK_RPM is not set # # SOC (System On Chip) specific Drivers # # # Broadcom SoC drivers # # # i.MX SoC drivers # # CONFIG_SUNXI_SRAM is not set # CONFIG_SOC_TI is not set # CONFIG_SOC_ZTE is not set CONFIG_PM_DEVFREQ=y # # DEVFREQ Governors # CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m # CONFIG_DEVFREQ_GOV_PERFORMANCE is not set # CONFIG_DEVFREQ_GOV_POWERSAVE is not set # CONFIG_DEVFREQ_GOV_USERSPACE is not set # CONFIG_DEVFREQ_GOV_PASSIVE is not set # # DEVFREQ Drivers # # CONFIG_PM_DEVFREQ_EVENT is not set CONFIG_EXTCON=y # # Extcon Device Drivers # # CONFIG_EXTCON_GPIO is not set # CONFIG_EXTCON_INTEL_INT3496 is not set # CONFIG_EXTCON_MAX3355 is not set # CONFIG_EXTCON_RT8973A is not set # CONFIG_EXTCON_SM5502 is not set # CONFIG_EXTCON_USB_GPIO is not set # CONFIG_MEMORY is not set # CONFIG_IIO is not set CONFIG_NTB=m # CONFIG_NTB_AMD is not set # CONFIG_NTB_IDT is not set # CONFIG_NTB_INTEL is not set # CONFIG_NTB_PINGPONG is not set # CONFIG_NTB_TOOL is not set # CONFIG_NTB_PERF is not set # CONFIG_NTB_TRANSPORT is not set # CONFIG_VME_BUS is not set CONFIG_PWM=y CONFIG_PWM_SYSFS=y # CONFIG_PWM_LPSS_PCI is not set # CONFIG_PWM_LPSS_PLATFORM is not set # CONFIG_PWM_PCA9685 is not set CONFIG_ARM_GIC_MAX_NR=1 # CONFIG_IPACK_BUS is not set # CONFIG_RESET_CONTROLLER is not set # CONFIG_FMC is not set # # PHY Subsystem # CONFIG_GENERIC_PHY=y # CONFIG_BCM_KONA_USB2_PHY is not set # CONFIG_PHY_PXA_28NM_HSIC is not set # CONFIG_PHY_PXA_28NM_USB2 is not set CONFIG_POWERCAP=y CONFIG_INTEL_RAPL=m # CONFIG_MCB is not set # # Performance monitor support # CONFIG_RAS=y # CONFIG_RAS_CEC is not set # CONFIG_THUNDERBOLT is not set # # Android # # CONFIG_ANDROID is not set CONFIG_LIBNVDIMM=m CONFIG_BLK_DEV_PMEM=m CONFIG_ND_BLK=m CONFIG_ND_CLAIM=y CONFIG_ND_BTT=m CONFIG_BTT=y CONFIG_ND_PFN=m CONFIG_NVDIMM_PFN=y CONFIG_NVDIMM_DAX=y CONFIG_DAX=y CONFIG_DEV_DAX=m CONFIG_DEV_DAX_PMEM=m CONFIG_NVMEM=y # CONFIG_STM is not set # CONFIG_INTEL_TH is not set # # FPGA Configuration Support # # CONFIG_FPGA is not set # # FSI support # # CONFIG_FSI is not set # # Firmware Drivers # CONFIG_EDD=m # CONFIG_EDD_OFF is not set CONFIG_FIRMWARE_MEMMAP=y CONFIG_DELL_RBU=m CONFIG_DCDBAS=m CONFIG_DMIID=y CONFIG_DMI_SYSFS=y CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y CONFIG_ISCSI_IBFT_FIND=y CONFIG_ISCSI_IBFT=m # CONFIG_FW_CFG_SYSFS is not set # CONFIG_GOOGLE_FIRMWARE is not set # # EFI (Extensible Firmware Interface) Support # CONFIG_EFI_VARS=y CONFIG_EFI_ESRT=y CONFIG_EFI_VARS_PSTORE=y CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y CONFIG_EFI_RUNTIME_MAP=y # CONFIG_EFI_FAKE_MEMMAP is not set CONFIG_EFI_RUNTIME_WRAPPERS=y # CONFIG_EFI_BOOTLOADER_CONTROL is not set # CONFIG_EFI_CAPSULE_LOADER is not set # CONFIG_EFI_TEST is not set # CONFIG_APPLE_PROPERTIES is not set CONFIG_UEFI_CPER=y # CONFIG_EFI_DEV_PATH_PARSER is not set # # Tegra firmware driver # # # File systems # CONFIG_DCACHE_WORD_ACCESS=y CONFIG_FS_IOMAP=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set CONFIG_EXT4_FS=y CONFIG_EXT4_USE_FOR_EXT2=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y # CONFIG_EXT4_ENCRYPTION is not set # CONFIG_EXT4_DEBUG is not set CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_XFS_FS=y CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set # CONFIG_XFS_WARN is not set # CONFIG_XFS_DEBUG is not set CONFIG_GFS2_FS=m CONFIG_GFS2_FS_LOCKING_DLM=y CONFIG_OCFS2_FS=m CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m CONFIG_OCFS2_FS_STATS=y CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_BTRFS_FS=m CONFIG_BTRFS_FS_POSIX_ACL=y # CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set # CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set # CONFIG_BTRFS_DEBUG is not set # CONFIG_BTRFS_ASSERT is not set # CONFIG_NILFS2_FS is not set CONFIG_F2FS_FS=m CONFIG_F2FS_STAT_FS=y CONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y # CONFIG_F2FS_FS_SECURITY is not set # CONFIG_F2FS_CHECK_FS is not set # CONFIG_F2FS_FS_ENCRYPTION is not set # CONFIG_F2FS_IO_TRACE is not set # CONFIG_F2FS_FAULT_INJECTION is not set CONFIG_FS_DAX=y CONFIG_FS_DAX_PMD=y CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y # CONFIG_EXPORTFS_BLOCK_OPS is not set CONFIG_FILE_LOCKING=y CONFIG_MANDATORY_FILE_LOCKING=y # CONFIG_FS_ENCRYPTION is not set CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y CONFIG_PRINT_QUOTA_WARNING=y # CONFIG_QUOTA_DEBUG is not set CONFIG_QUOTA_TREE=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y CONFIG_QUOTACTL_COMPAT=y CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=m CONFIG_CUSE=m CONFIG_OVERLAY_FS=m # CONFIG_OVERLAY_FS_REDIRECT_DIR is not set # CONFIG_OVERLAY_FS_INDEX is not set # # Caches # CONFIG_FSCACHE=m CONFIG_FSCACHE_STATS=y # CONFIG_FSCACHE_HISTOGRAM is not set # CONFIG_FSCACHE_DEBUG is not set # CONFIG_FSCACHE_OBJECT_LIST is not set CONFIG_CACHEFILES=m # CONFIG_CACHEFILES_DEBUG is not set # CONFIG_CACHEFILES_HISTOGRAM is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="ascii" # CONFIG_FAT_DEFAULT_UTF8 is not set # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_CHILDREN=y CONFIG_KERNFS=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_ARCH_HAS_GIGANTIC_PAGE=y CONFIG_CONFIGFS_FS=y CONFIG_EFIVAR_FS=y CONFIG_MISC_FILESYSTEMS=y # CONFIG_ORANGEFS_FS is not set # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_UBIFS_FS is not set CONFIG_CRAMFS=m CONFIG_SQUASHFS=m CONFIG_SQUASHFS_FILE_CACHE=y # CONFIG_SQUASHFS_FILE_DIRECT is not set CONFIG_SQUASHFS_DECOMP_SINGLE=y # CONFIG_SQUASHFS_DECOMP_MULTI is not set # CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set CONFIG_SQUASHFS_XATTR=y CONFIG_SQUASHFS_ZLIB=y # CONFIG_SQUASHFS_LZ4 is not set CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX6FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_PSTORE=y CONFIG_PSTORE_ZLIB_COMPRESS=y # CONFIG_PSTORE_LZO_COMPRESS is not set # CONFIG_PSTORE_LZ4_COMPRESS is not set CONFIG_PSTORE_CONSOLE=y CONFIG_PSTORE_PMSG=y # CONFIG_PSTORE_FTRACE is not set CONFIG_PSTORE_RAM=m # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_EXOFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V2 is not set CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=m # CONFIG_NFS_SWAP is not set CONFIG_NFS_V4_1=y CONFIG_NFS_V4_2=y CONFIG_PNFS_FILE_LAYOUT=m CONFIG_PNFS_BLOCK=m CONFIG_PNFS_FLEXFILE_LAYOUT=m CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" # CONFIG_NFS_V4_1_MIGRATION is not set CONFIG_NFS_V4_SECURITY_LABEL=y CONFIG_ROOT_NFS=y # CONFIG_NFS_USE_LEGACY_DNS is not set CONFIG_NFS_USE_KERNEL_DNS=y CONFIG_NFS_DEBUG=y CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y # CONFIG_NFSD_BLOCKLAYOUT is not set # CONFIG_NFSD_SCSILAYOUT is not set # CONFIG_NFSD_FLEXFILELAYOUT is not set CONFIG_NFSD_V4_SECURITY_LABEL=y # CONFIG_NFSD_FAULT_INJECTION is not set CONFIG_GRACE_PERIOD=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_BACKCHANNEL=y CONFIG_RPCSEC_GSS_KRB5=m CONFIG_SUNRPC_DEBUG=y # CONFIG_CEPH_FS is not set CONFIG_CIFS=m CONFIG_CIFS_STATS=y # CONFIG_CIFS_STATS2 is not set CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_UPCALL=y CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y CONFIG_CIFS_ACL=y CONFIG_CIFS_DEBUG=y # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_DEBUG_DUMP_KEYS is not set CONFIG_CIFS_DFS_UPCALL=y # CONFIG_CIFS_SMB311 is not set # CONFIG_CIFS_FSCACHE is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set CONFIG_9P_FS=y CONFIG_9P_FS_POSIX_ACL=y # CONFIG_9P_FS_SECURITY is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_737=m CONFIG_NLS_CODEPAGE_775=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_CODEPAGE_852=m CONFIG_NLS_CODEPAGE_855=m CONFIG_NLS_CODEPAGE_857=m CONFIG_NLS_CODEPAGE_860=m CONFIG_NLS_CODEPAGE_861=m CONFIG_NLS_CODEPAGE_862=m CONFIG_NLS_CODEPAGE_863=m CONFIG_NLS_CODEPAGE_864=m CONFIG_NLS_CODEPAGE_865=m CONFIG_NLS_CODEPAGE_866=m CONFIG_NLS_CODEPAGE_869=m CONFIG_NLS_CODEPAGE_936=m CONFIG_NLS_CODEPAGE_950=m CONFIG_NLS_CODEPAGE_932=m CONFIG_NLS_CODEPAGE_949=m CONFIG_NLS_CODEPAGE_874=m CONFIG_NLS_ISO8859_8=m CONFIG_NLS_CODEPAGE_1250=m CONFIG_NLS_CODEPAGE_1251=m CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_2=m CONFIG_NLS_ISO8859_3=m CONFIG_NLS_ISO8859_4=m CONFIG_NLS_ISO8859_5=m CONFIG_NLS_ISO8859_6=m CONFIG_NLS_ISO8859_7=m CONFIG_NLS_ISO8859_9=m CONFIG_NLS_ISO8859_13=m CONFIG_NLS_ISO8859_14=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_MAC_ROMAN=m CONFIG_NLS_MAC_CELTIC=m CONFIG_NLS_MAC_CENTEURO=m CONFIG_NLS_MAC_CROATIAN=m CONFIG_NLS_MAC_CYRILLIC=m CONFIG_NLS_MAC_GAELIC=m CONFIG_NLS_MAC_GREEK=m CONFIG_NLS_MAC_ICELAND=m CONFIG_NLS_MAC_INUIT=m CONFIG_NLS_MAC_ROMANIAN=m CONFIG_NLS_MAC_TURKISH=m CONFIG_NLS_UTF8=m CONFIG_DLM=m CONFIG_DLM_DEBUG=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # # printk and dmesg options # CONFIG_PRINTK_TIME=y CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 CONFIG_BOOT_PRINTK_DELAY=y CONFIG_DYNAMIC_DEBUG=y # # Compile-time checks and compiler options # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_WARN_DEPRECATED is not set CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_STRIP_ASM_SYMS=y # CONFIG_READABLE_ASM is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_PAGE_OWNER is not set CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_SECTION_MISMATCH_WARN_ONLY=y CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y # CONFIG_STACK_VALIDATION is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 CONFIG_MAGIC_SYSRQ_SERIAL=y CONFIG_DEBUG_KERNEL=y # # Memory Debugging # # CONFIG_PAGE_EXTENSION is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_PAGE_POISONING is not set # CONFIG_DEBUG_PAGE_REF is not set CONFIG_DEBUG_RODATA_TEST=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_VM is not set CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y # CONFIG_DEBUG_VIRTUAL is not set CONFIG_DEBUG_MEMORY_INIT=y CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m # CONFIG_DEBUG_PER_CPU_MAPS is not set CONFIG_HAVE_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_HAVE_ARCH_KMEMCHECK=y CONFIG_HAVE_ARCH_KASAN=y # CONFIG_KASAN is not set CONFIG_ARCH_HAS_KCOV=y # CONFIG_KCOV is not set CONFIG_DEBUG_SHIRQ=y # # Debug Lockups and Hangs # CONFIG_LOCKUP_DETECTOR=y CONFIG_SOFTLOCKUP_DETECTOR=y CONFIG_HARDLOCKUP_DETECTOR_PERF=y CONFIG_HARDLOCKUP_DETECTOR=y CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_DETECT_HUNG_TASK is not set # CONFIG_WQ_WATCHDOG is not set CONFIG_PANIC_ON_OOPS=y CONFIG_PANIC_ON_OOPS_VALUE=1 CONFIG_PANIC_TIMEOUT=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHED_INFO=y CONFIG_SCHEDSTATS=y # CONFIG_SCHED_STACK_END_CHECK is not set # CONFIG_DEBUG_TIMEKEEPING is not set # # Lock Debugging (spinlocks, mutexes, etc...) # # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set CONFIG_DEBUG_ATOMIC_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_LOCK_TORTURE_TEST=m # CONFIG_WW_MUTEX_SELFTEST is not set CONFIG_STACKTRACE=y # CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_PI_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set # # RCU Debugging # # CONFIG_PROVE_RCU is not set CONFIG_TORTURE_TEST=m # CONFIG_RCU_PERF_TEST is not set CONFIG_RCU_TORTURE_TEST=m CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_RCU_TRACE is not set # CONFIG_RCU_EQS_DEBUG is not set # CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set CONFIG_NOTIFIER_ERROR_INJECTION=m CONFIG_PM_NOTIFIER_ERROR_INJECT=m # CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_FENTRY=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACER_MAX_TRACE=y CONFIG_TRACE_CLOCK=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y CONFIG_FUNCTION_TRACER=y CONFIG_FUNCTION_GRAPH_TRACER=y # CONFIG_IRQSOFF_TRACER is not set CONFIG_SCHED_TRACER=y # CONFIG_HWLAT_TRACER is not set CONFIG_FTRACE_SYSCALLS=y CONFIG_TRACER_SNAPSHOT=y # CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_KPROBE_EVENTS=y CONFIG_UPROBE_EVENTS=y CONFIG_BPF_EVENTS=y CONFIG_PROBE_EVENTS=y CONFIG_DYNAMIC_FTRACE=y CONFIG_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_FUNCTION_PROFILER=y CONFIG_FTRACE_MCOUNT_RECORD=y # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_MMIOTRACE is not set CONFIG_TRACING_MAP=y CONFIG_HIST_TRIGGERS=y # CONFIG_TRACEPOINT_BENCHMARK is not set CONFIG_RING_BUFFER_BENCHMARK=m # CONFIG_RING_BUFFER_STARTUP_TEST is not set # CONFIG_TRACE_EVAL_MAP_FILE is not set CONFIG_TRACING_EVENTS_GPIO=y # # Runtime Testing # CONFIG_LKDTM=m # CONFIG_TEST_LIST_SORT is not set # CONFIG_TEST_SORT is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set CONFIG_RBTREE_TEST=m CONFIG_INTERVAL_TREE_TEST=m CONFIG_PERCPU_TEST=m CONFIG_ATOMIC64_SELFTEST=y CONFIG_ASYNC_RAID6_TEST=m # CONFIG_TEST_HEXDUMP is not set # CONFIG_TEST_STRING_HELPERS is not set CONFIG_TEST_KSTRTOX=m CONFIG_TEST_PRINTF=m CONFIG_TEST_BITMAP=m # CONFIG_TEST_UUID is not set # CONFIG_TEST_RHASHTABLE is not set # CONFIG_TEST_HASH is not set CONFIG_PROVIDE_OHCI1394_DMA_INIT=y # CONFIG_DMA_API_DEBUG is not set CONFIG_TEST_LKM=m CONFIG_TEST_USER_COPY=m CONFIG_TEST_BPF=m CONFIG_TEST_FIRMWARE=m # CONFIG_TEST_SYSCTL is not set CONFIG_TEST_UDELAY=m # CONFIG_MEMTEST is not set CONFIG_TEST_STATIC_KEYS=m # CONFIG_BUG_ON_DATA_CORRUPTION is not set # CONFIG_TEST_KMOD is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y # CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set # CONFIG_UBSAN is not set CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y CONFIG_STRICT_DEVMEM=y # CONFIG_IO_STRICT_DEVMEM is not set CONFIG_EARLY_PRINTK_USB=y CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK_DBGP=y # CONFIG_EARLY_PRINTK_EFI is not set # CONFIG_EARLY_PRINTK_USB_XDBC is not set # CONFIG_X86_PTDUMP_CORE is not set # CONFIG_X86_PTDUMP is not set # CONFIG_EFI_PGT_DUMP is not set # CONFIG_DEBUG_WX is not set CONFIG_DOUBLEFAULT=y # CONFIG_DEBUG_TLBFLUSH is not set # CONFIG_IOMMU_DEBUG is not set # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_X86_DECODER_SELFTEST=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 CONFIG_DEBUG_BOOT_PARAMS=y # CONFIG_CPA_DEBUG is not set CONFIG_OPTIMIZE_INLINING=y # CONFIG_DEBUG_ENTRY is not set # CONFIG_DEBUG_NMI_SELFTEST is not set CONFIG_X86_DEBUG_FPU=y # CONFIG_PUNIT_ATOM_DEBUG is not set # # Security options # CONFIG_KEYS=y CONFIG_KEYS_COMPAT=y CONFIG_PERSISTENT_KEYRINGS=y CONFIG_BIG_KEYS=y CONFIG_TRUSTED_KEYS=y CONFIG_ENCRYPTED_KEYS=y # CONFIG_KEY_DH_OPERATIONS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y CONFIG_SECURITY_WRITABLE_HOOKS=y CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_NETWORK_XFRM=y # CONFIG_SECURITY_PATH is not set CONFIG_INTEL_TXT=y CONFIG_LSM_MMAP_MIN_ADDR=65535 CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y # CONFIG_HARDENED_USERCOPY is not set # CONFIG_FORTIFY_SOURCE is not set # CONFIG_STATIC_USERMODEHELPER is not set CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 # CONFIG_SECURITY_SMACK is not set # CONFIG_SECURITY_TOMOYO is not set # CONFIG_SECURITY_APPARMOR is not set # CONFIG_SECURITY_LOADPIN is not set # CONFIG_SECURITY_YAMA is not set CONFIG_INTEGRITY=y CONFIG_INTEGRITY_SIGNATURE=y CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y CONFIG_INTEGRITY_TRUSTED_KEYRING=y CONFIG_INTEGRITY_AUDIT=y CONFIG_IMA=y CONFIG_IMA_MEASURE_PCR_IDX=10 CONFIG_IMA_LSM_RULES=y # CONFIG_IMA_TEMPLATE is not set CONFIG_IMA_NG_TEMPLATE=y # CONFIG_IMA_SIG_TEMPLATE is not set CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng" CONFIG_IMA_DEFAULT_HASH_SHA1=y # CONFIG_IMA_DEFAULT_HASH_SHA256 is not set CONFIG_IMA_DEFAULT_HASH="sha1" # CONFIG_IMA_WRITE_POLICY is not set # CONFIG_IMA_READ_POLICY is not set CONFIG_IMA_APPRAISE=y CONFIG_IMA_APPRAISE_BOOTPARAM=y CONFIG_IMA_TRUSTED_KEYRING=y # CONFIG_IMA_BLACKLIST_KEYRING is not set # CONFIG_IMA_LOAD_X509 is not set CONFIG_EVM=y CONFIG_EVM_ATTR_FSUUID=y # CONFIG_EVM_LOAD_X509 is not set CONFIG_DEFAULT_SECURITY_SELINUX=y # CONFIG_DEFAULT_SECURITY_DAC is not set CONFIG_DEFAULT_SECURITY="selinux" CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m CONFIG_ASYNC_MEMCPY=m CONFIG_ASYNC_XOR=m CONFIG_ASYNC_PQ=m CONFIG_ASYNC_RAID6_RECOV=m CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_RNG_DEFAULT=y CONFIG_CRYPTO_AKCIPHER2=y CONFIG_CRYPTO_AKCIPHER=y CONFIG_CRYPTO_KPP2=y CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_RSA=y # CONFIG_CRYPTO_DH is not set # CONFIG_CRYPTO_ECDH is not set CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y CONFIG_CRYPTO_GF128MUL=m CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_NULL2=y CONFIG_CRYPTO_PCRYPT=m CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m # CONFIG_CRYPTO_MCRYPTD is not set CONFIG_CRYPTO_AUTHENC=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_ABLK_HELPER=m CONFIG_CRYPTO_SIMD=m CONFIG_CRYPTO_GLUE_HELPER_X86=m CONFIG_CRYPTO_ENGINE=m # # Authenticated Encryption with Associated Data # CONFIG_CRYPTO_CCM=m CONFIG_CRYPTO_GCM=m # CONFIG_CRYPTO_CHACHA20POLY1305 is not set CONFIG_CRYPTO_SEQIV=y CONFIG_CRYPTO_ECHAINIV=m # # Block modes # CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_CTS=m CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_LRW=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_XTS=m # CONFIG_CRYPTO_KEYWRAP is not set # # Hash modes # CONFIG_CRYPTO_CMAC=m CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m # # Digest # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=m CONFIG_CRYPTO_CRC32=m CONFIG_CRYPTO_CRC32_PCLMUL=m CONFIG_CRYPTO_CRCT10DIF=y CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m CONFIG_CRYPTO_GHASH=m # CONFIG_CRYPTO_POLY1305 is not set # CONFIG_CRYPTO_POLY1305_X86_64 is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA1_SSSE3=m CONFIG_CRYPTO_SHA256_SSSE3=m CONFIG_CRYPTO_SHA512_SSSE3=m # CONFIG_CRYPTO_SHA1_MB is not set # CONFIG_CRYPTO_SHA256_MB is not set # CONFIG_CRYPTO_SHA512_MB is not set CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=m # CONFIG_CRYPTO_SHA3 is not set CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m # # Ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_TI is not set CONFIG_CRYPTO_AES_X86_64=y CONFIG_CRYPTO_AES_NI_INTEL=m CONFIG_CRYPTO_ANUBIS=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_BLOWFISH_COMMON=m CONFIG_CRYPTO_BLOWFISH_X86_64=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAMELLIA_X86_64=m CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m CONFIG_CRYPTO_CAST_COMMON=m CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST5_AVX_X86_64=m CONFIG_CRYPTO_CAST6=m CONFIG_CRYPTO_CAST6_AVX_X86_64=m CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_DES3_EDE_X86_64 is not set CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SALSA20_X86_64=m # CONFIG_CRYPTO_CHACHA20 is not set # CONFIG_CRYPTO_CHACHA20_X86_64 is not set CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m CONFIG_CRYPTO_SERPENT_AVX_X86_64=m CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_TWOFISH_COMMON=m CONFIG_CRYPTO_TWOFISH_X86_64=m CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m # # Compression # CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_842 is not set # CONFIG_CRYPTO_LZ4 is not set # CONFIG_CRYPTO_LZ4HC is not set # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_DRBG_MENU=y CONFIG_CRYPTO_DRBG_HMAC=y # CONFIG_CRYPTO_DRBG_HASH is not set # CONFIG_CRYPTO_DRBG_CTR is not set CONFIG_CRYPTO_DRBG=y CONFIG_CRYPTO_JITTERENTROPY=y CONFIG_CRYPTO_USER_API=y CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_USER_API_SKCIPHER=y # CONFIG_CRYPTO_USER_API_RNG is not set # CONFIG_CRYPTO_USER_API_AEAD is not set CONFIG_CRYPTO_HASH_INFO=y CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_PADLOCK=m CONFIG_CRYPTO_DEV_PADLOCK_AES=m CONFIG_CRYPTO_DEV_PADLOCK_SHA=m # CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set # CONFIG_CRYPTO_DEV_CCP is not set # CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set # CONFIG_CRYPTO_DEV_QAT_C3XXX is not set # CONFIG_CRYPTO_DEV_QAT_C62X is not set # CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set # CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set # CONFIG_CRYPTO_DEV_QAT_C62XVF is not set # CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set # CONFIG_CRYPTO_DEV_CHELSIO is not set CONFIG_CRYPTO_DEV_VIRTIO=m CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_X509_CERTIFICATE_PARSER=y # CONFIG_PKCS7_MESSAGE_PARSER is not set # # Certificates for signature checking # CONFIG_SYSTEM_TRUSTED_KEYRING=y CONFIG_SYSTEM_TRUSTED_KEYS="" # CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set # CONFIG_SECONDARY_TRUSTED_KEYRING is not set # CONFIG_SYSTEM_BLACKLIST_KEYRING is not set CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_HAVE_KVM_IRQFD=y CONFIG_HAVE_KVM_IRQ_ROUTING=y CONFIG_HAVE_KVM_EVENTFD=y CONFIG_KVM_MMIO=y CONFIG_KVM_ASYNC_PF=y CONFIG_HAVE_KVM_MSI=y CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y CONFIG_KVM_VFIO=y CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y CONFIG_KVM_COMPAT=y CONFIG_HAVE_KVM_IRQ_BYPASS=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=m CONFIG_KVM_INTEL=m CONFIG_KVM_AMD=m CONFIG_KVM_MMU_AUDIT=y CONFIG_VHOST_NET=m # CONFIG_VHOST_SCSI is not set # CONFIG_VHOST_VSOCK is not set CONFIG_VHOST=m # CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_RAID6_PQ=m CONFIG_BITREVERSE=y # CONFIG_HAVE_ARCH_BITREVERSE is not set CONFIG_RATIONAL=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_NET_UTILS=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_IO=y CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y CONFIG_ARCH_HAS_FAST_MULTIPLIER=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set # CONFIG_CRC4 is not set # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=y CONFIG_CRC8=m # CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set # CONFIG_RANDOM32_SELFTEST is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_LZ4_DECOMPRESS=y CONFIG_XZ_DEC=y CONFIG_XZ_DEC_X86=y CONFIG_XZ_DEC_POWERPC=y CONFIG_XZ_DEC_IA64=y CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_ARMTHUMB=y CONFIG_XZ_DEC_SPARC=y CONFIG_XZ_DEC_BCJ=y # CONFIG_XZ_DEC_TEST is not set CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_DECOMPRESS_XZ=y CONFIG_DECOMPRESS_LZO=y CONFIG_DECOMPRESS_LZ4=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_REED_SOLOMON=m CONFIG_REED_SOLOMON_ENC8=y CONFIG_REED_SOLOMON_DEC8=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_BTREE=y CONFIG_INTERVAL_TREE=y CONFIG_RADIX_TREE_MULTIORDER=y CONFIG_ASSOCIATIVE_ARRAY=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y CONFIG_HAS_DMA=y # CONFIG_DMA_NOOP_OPS is not set # CONFIG_DMA_VIRT_OPS is not set CONFIG_CHECK_SIGNATURE=y CONFIG_CPUMASK_OFFSTACK=y CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_GLOB=y # CONFIG_GLOB_SELFTEST is not set CONFIG_NLATTR=y CONFIG_CLZ_TAB=y CONFIG_CORDIC=m # CONFIG_DDR is not set CONFIG_IRQ_POLL=y CONFIG_MPILIB=y CONFIG_SIGNATURE=y CONFIG_OID_REGISTRY=y CONFIG_UCS2_STRING=y CONFIG_FONT_SUPPORT=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_SG_SPLIT is not set CONFIG_SG_POOL=y CONFIG_ARCH_HAS_SG_CHAIN=y CONFIG_ARCH_HAS_PMEM_API=y CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y CONFIG_ARCH_HAS_MMIO_FLUSH=y CONFIG_SBITMAP=y [-- Attachment #3: job-script --] [-- Type: text/plain, Size: 6786 bytes --] #!/bin/sh export_top_env() { export suite='will-it-scale' export testcase='will-it-scale' export category='benchmark' export nr_task=16 export job_origin='/lkp/lkp/.src-20170730-112559/allot/cyclic:linux-devel:devel-hourly/lkp-bdw-ep3d/will-it-scale-16.yaml' export queue='bisect' export testbox='lkp-bdw-ep3d' export tbox_group='lkp-bdw-ep3d' export submit_id='5988034c0b9a934d7f4e66ed' export job_file='/lkp/scheduled/lkp-bdw-ep3d/will-it-scale-16-process-brk1-performance-debian-x86_64-2016-08-31.cgz-76742700225cad9df49f05399381ac3f1ec3dc60-20170807-85375-wvmgmf-0.yaml' export id='db661966e38bc97ce63bb059ee9e6c649c50c9c6' export model='Broadwell-EP' export nr_cpu=88 export memory='64G' export swap_partitions= export rootfs_partition= export brand='Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz' export commit='76742700225cad9df49f05399381ac3f1ec3dc60' export kconfig='x86_64-rhel-7.2' export compiler='gcc-6' export rootfs='debian-x86_64-2016-08-31.cgz' export enqueue_time='2017-08-07 14:06:04 +0800' export _id='5988034c0b9a934d7f4e66ed' export _rt='/result/will-it-scale/16-process-brk1-performance/lkp-bdw-ep3d/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/76742700225cad9df49f05399381ac3f1ec3dc60' export user='lkp' export head_commit='b6317d2314ac5676fd4ceba3d5ece9e707c0630a' export base_commit='16f73eb02d7e1765ccab3d2018e0bd98eb93d973' export branch='linux-devel/devel-hourly-2017080617' export result_root='/result/will-it-scale/16-process-brk1-performance/lkp-bdw-ep3d/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/76742700225cad9df49f05399381ac3f1ec3dc60/0' export LKP_SERVER='inn' export max_uptime=1500 export initrd='/osimage/debian/debian-x86_64-2016-08-31.cgz' export bootloader_append='root=/dev/ram0 user=lkp job=/lkp/scheduled/lkp-bdw-ep3d/will-it-scale-16-process-brk1-performance-debian-x86_64-2016-08-31.cgz-76742700225cad9df49f05399381ac3f1ec3dc60-20170807-85375-wvmgmf-0.yaml ARCH=x86_64 kconfig=x86_64-rhel-7.2 branch=linux-devel/devel-hourly-2017080617 commit=76742700225cad9df49f05399381ac3f1ec3dc60 BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-6/76742700225cad9df49f05399381ac3f1ec3dc60/vmlinuz-4.13.0-rc2-00028-g767427002 max_uptime=1500 RESULT_ROOT=/result/will-it-scale/16-process-brk1-performance/lkp-bdw-ep3d/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/76742700225cad9df49f05399381ac3f1ec3dc60/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw' export lkp_initrd='/lkp/lkp/lkp-x86_64.cgz' export modules_initrd='/pkg/linux/x86_64-rhel-7.2/gcc-6/76742700225cad9df49f05399381ac3f1ec3dc60/modules.cgz' export bm_initrd='/osimage/deps/debian-x86_64-2016-08-31.cgz/lkp_2017-08-01.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/rsync-rootfs_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/will-it-scale_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/will-it-scale-x86_64_2016-09-02.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/iostat_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/turbostat_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/turbostat-x86_64-d5256b2_2017-06-20.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/perf_2017-07-27.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/perf-x86_64-da08f35b0f82_2017-07-27.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/hw_2016-11-15.cgz' export site='inn' export LKP_CGI_PORT=80 export LKP_CIFS_PORT=139 export repeat_to=2 export kernel='/pkg/linux/x86_64-rhel-7.2/gcc-6/76742700225cad9df49f05399381ac3f1ec3dc60/vmlinuz-4.13.0-rc2-00028-g767427002' export dequeue_time='2017-08-07 14:18:02 +0800' export job_initrd='/lkp/scheduled/lkp-bdw-ep3d/will-it-scale-16-process-brk1-performance-debian-x86_64-2016-08-31.cgz-76742700225cad9df49f05399381ac3f1ec3dc60-20170807-85375-wvmgmf-0.cgz' [ -n "$LKP_SRC" ] || export LKP_SRC=/lkp/${user:-lkp}/src } run_job() { echo $$ > $TMP/run-job.pid . $LKP_SRC/lib/http.sh . $LKP_SRC/lib/job.sh . $LKP_SRC/lib/env.sh export_top_env run_setup $LKP_SRC/setup/cpufreq_governor 'performance' run_monitor $LKP_SRC/monitors/wrapper kmsg run_monitor $LKP_SRC/monitors/wrapper iostat run_monitor $LKP_SRC/monitors/wrapper heartbeat run_monitor $LKP_SRC/monitors/wrapper vmstat run_monitor $LKP_SRC/monitors/wrapper numa-numastat run_monitor $LKP_SRC/monitors/wrapper numa-vmstat run_monitor $LKP_SRC/monitors/wrapper numa-meminfo run_monitor $LKP_SRC/monitors/wrapper proc-vmstat run_monitor $LKP_SRC/monitors/wrapper proc-stat run_monitor $LKP_SRC/monitors/wrapper meminfo run_monitor $LKP_SRC/monitors/wrapper slabinfo run_monitor $LKP_SRC/monitors/wrapper interrupts run_monitor $LKP_SRC/monitors/wrapper lock_stat run_monitor $LKP_SRC/monitors/wrapper latency_stats run_monitor $LKP_SRC/monitors/wrapper softirqs run_monitor $LKP_SRC/monitors/one-shot/wrapper bdi_dev_mapping run_monitor $LKP_SRC/monitors/wrapper diskstats run_monitor $LKP_SRC/monitors/wrapper nfsstat run_monitor $LKP_SRC/monitors/wrapper cpuidle run_monitor $LKP_SRC/monitors/wrapper cpufreq-stats run_monitor $LKP_SRC/monitors/wrapper turbostat run_monitor $LKP_SRC/monitors/wrapper sched_debug run_monitor $LKP_SRC/monitors/wrapper perf-stat run_monitor $LKP_SRC/monitors/wrapper mpstat run_monitor $LKP_SRC/monitors/no-stdout/wrapper perf-profile run_monitor $LKP_SRC/monitors/wrapper oom-killer run_monitor $LKP_SRC/monitors/plain/watchdog run_test mode='process' test='brk1' $LKP_SRC/tests/wrapper will-it-scale } extract_stats() { $LKP_SRC/stats/wrapper will-it-scale $LKP_SRC/stats/wrapper kmsg $LKP_SRC/stats/wrapper iostat $LKP_SRC/stats/wrapper vmstat $LKP_SRC/stats/wrapper numa-numastat $LKP_SRC/stats/wrapper numa-vmstat $LKP_SRC/stats/wrapper numa-meminfo $LKP_SRC/stats/wrapper proc-vmstat $LKP_SRC/stats/wrapper meminfo $LKP_SRC/stats/wrapper slabinfo $LKP_SRC/stats/wrapper interrupts $LKP_SRC/stats/wrapper lock_stat $LKP_SRC/stats/wrapper latency_stats $LKP_SRC/stats/wrapper softirqs $LKP_SRC/stats/wrapper diskstats $LKP_SRC/stats/wrapper nfsstat $LKP_SRC/stats/wrapper cpuidle $LKP_SRC/stats/wrapper turbostat $LKP_SRC/stats/wrapper sched_debug $LKP_SRC/stats/wrapper perf-stat $LKP_SRC/stats/wrapper mpstat $LKP_SRC/stats/wrapper perf-profile $LKP_SRC/stats/wrapper time will-it-scale.time $LKP_SRC/stats/wrapper time $LKP_SRC/stats/wrapper dmesg $LKP_SRC/stats/wrapper kmsg $LKP_SRC/stats/wrapper stderr $LKP_SRC/stats/wrapper last_state } "$@" [-- Attachment #4: job.yaml --] [-- Type: text/plain, Size: 4430 bytes --] --- #! jobs/will-it-scale-16.yaml suite: will-it-scale testcase: will-it-scale category: benchmark nr_task: 16 will-it-scale: mode: process test: brk1 job_origin: "/lkp/lkp/.src-20170730-112559/allot/cyclic:linux-devel:devel-hourly/lkp-bdw-ep3d/will-it-scale-16.yaml" #! queue options queue: bisect testbox: lkp-bdw-ep3d tbox_group: lkp-bdw-ep3d submit_id: 5988034c0b9a934d7f4e66ed job_file: "/lkp/scheduled/lkp-bdw-ep3d/will-it-scale-16-process-brk1-performance-debian-x86_64-2016-08-31.cgz-76742700225cad9df49f05399381ac3f1ec3dc60-20170807-85375-wvmgmf-0.yaml" id: db661966e38bc97ce63bb059ee9e6c649c50c9c6 #! hosts/lkp-bdw-ep3d model: Broadwell-EP nr_cpu: 88 memory: 64G swap_partitions: rootfs_partition: brand: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz #! include/category/benchmark kmsg: iostat: heartbeat: vmstat: numa-numastat: numa-vmstat: numa-meminfo: proc-vmstat: proc-stat: meminfo: slabinfo: interrupts: lock_stat: latency_stats: softirqs: bdi_dev_mapping: diskstats: nfsstat: cpuidle: cpufreq-stats: turbostat: sched_debug: perf-stat: mpstat: perf-profile: #! include/category/ALL cpufreq_governor: performance #! include/queue/cyclic commit: 76742700225cad9df49f05399381ac3f1ec3dc60 #! default params kconfig: x86_64-rhel-7.2 compiler: gcc-6 rootfs: debian-x86_64-2016-08-31.cgz enqueue_time: 2017-08-07 14:06:04.746054094 +08:00 _id: 5988034c0b9a934d7f4e66ed _rt: "/result/will-it-scale/16-process-brk1-performance/lkp-bdw-ep3d/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/76742700225cad9df49f05399381ac3f1ec3dc60" #! schedule options user: lkp head_commit: b6317d2314ac5676fd4ceba3d5ece9e707c0630a base_commit: 16f73eb02d7e1765ccab3d2018e0bd98eb93d973 branch: linux-devel/devel-hourly-2017080617 result_root: "/result/will-it-scale/16-process-brk1-performance/lkp-bdw-ep3d/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/76742700225cad9df49f05399381ac3f1ec3dc60/0" LKP_SERVER: inn max_uptime: 1500 initrd: "/osimage/debian/debian-x86_64-2016-08-31.cgz" bootloader_append: - root=/dev/ram0 - user=lkp - job=/lkp/scheduled/lkp-bdw-ep3d/will-it-scale-16-process-brk1-performance-debian-x86_64-2016-08-31.cgz-76742700225cad9df49f05399381ac3f1ec3dc60-20170807-85375-wvmgmf-0.yaml - ARCH=x86_64 - kconfig=x86_64-rhel-7.2 - branch=linux-devel/devel-hourly-2017080617 - commit=76742700225cad9df49f05399381ac3f1ec3dc60 - BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-6/76742700225cad9df49f05399381ac3f1ec3dc60/vmlinuz-4.13.0-rc2-00028-g767427002 - max_uptime=1500 - RESULT_ROOT=/result/will-it-scale/16-process-brk1-performance/lkp-bdw-ep3d/debian-x86_64-2016-08-31.cgz/x86_64-rhel-7.2/gcc-6/76742700225cad9df49f05399381ac3f1ec3dc60/0 - LKP_SERVER=inn - debug - apic=debug - sysrq_always_enabled - rcupdate.rcu_cpu_stall_timeout=100 - net.ifnames=0 - printk.devkmsg=on - panic=-1 - softlockup_panic=1 - nmi_watchdog=panic - oops=panic - load_ramdisk=2 - prompt_ramdisk=0 - drbd.minor_count=8 - systemd.log_level=err - ignore_loglevel - earlyprintk=ttyS0,115200 - console=ttyS0,115200 - console=tty0 - vga=normal - rw lkp_initrd: "/lkp/lkp/lkp-x86_64.cgz" modules_initrd: "/pkg/linux/x86_64-rhel-7.2/gcc-6/76742700225cad9df49f05399381ac3f1ec3dc60/modules.cgz" bm_initrd: "/osimage/deps/debian-x86_64-2016-08-31.cgz/lkp_2017-08-01.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/rsync-rootfs_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/will-it-scale_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/will-it-scale-x86_64_2016-09-02.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/iostat_2016-11-15.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/turbostat_2016-11-15.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/turbostat-x86_64-d5256b2_2017-06-20.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/perf_2017-07-27.cgz,/osimage/pkg/debian-x86_64-2016-08-31.cgz/perf-x86_64-da08f35b0f82_2017-07-27.cgz,/osimage/deps/debian-x86_64-2016-08-31.cgz/hw_2016-11-15.cgz" site: inn #! /lkp/lkp/.src-20170804-205938/include/site/inn LKP_CGI_PORT: 80 LKP_CIFS_PORT: 139 oom-killer: watchdog: #! runtime status repeat_to: 2 #! user overrides kernel: "/pkg/linux/x86_64-rhel-7.2/gcc-6/76742700225cad9df49f05399381ac3f1ec3dc60/vmlinuz-4.13.0-rc2-00028-g767427002" dequeue_time: 2017-08-07 14:18:02.462481279 +08:00 #! /lkp/lkp/.src-20170807-121104/include/site/inn job_state: finished loadavg: '13.53' [-- Attachment #5: reproduce --] [-- Type: text/plain, Size: 286 bytes --] for cpu_dir in /sys/devices/system/cpu/cpu[0-9]* do online_file="$cpu_dir"/online [ -f "$online_file" ] && [ "$(cat "$online_file")" -eq 0 ] && continue file="$cpu_dir"/cpufreq/scaling_governor [ -f "$file" ] && echo "performance" > "$file" done ./runtest.py brk1 295 process 16 ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-08 1:19 ` [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression kernel test robot @ 2017-08-08 2:28 ` Minchan Kim 2017-08-08 2:28 ` Minchan Kim 2017-08-08 4:23 ` Nadav Amit 0 siblings, 2 replies; 35+ messages in thread From: Minchan Kim @ 2017-08-08 2:28 UTC (permalink / raw) To: kernel test robot Cc: Nadav Amit, linux-mm, nadav.amit, linux-kernel, akpm, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, lkp Hi, On Tue, Aug 08, 2017 at 09:19:23AM +0800, kernel test robot wrote: > > Greeting, > > FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: > > > commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") > url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm-migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 > > > in testcase: will-it-scale > on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory > with following parameters: > > nr_task: 16 > mode: process > test: brk1 > cpufreq_governor: performance > > test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. > test-url: https://github.com/antonblanchard/will-it-scale Thanks for the report. Could you explain what kinds of workload you are testing? Does it calls frequently madvise(MADV_DONTNEED) in parallel on multiple threads? -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@kvack.org. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a> ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-08 2:28 ` Minchan Kim @ 2017-08-08 2:28 ` Minchan Kim 2017-08-08 4:23 ` Nadav Amit 1 sibling, 0 replies; 35+ messages in thread From: Minchan Kim @ 2017-08-08 2:28 UTC (permalink / raw) To: kernel test robot Cc: Nadav Amit, linux-mm, nadav.amit, linux-kernel, akpm, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, lkp Hi, On Tue, Aug 08, 2017 at 09:19:23AM +0800, kernel test robot wrote: > > Greeting, > > FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: > > > commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") > url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm-migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 > > > in testcase: will-it-scale > on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory > with following parameters: > > nr_task: 16 > mode: process > test: brk1 > cpufreq_governor: performance > > test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. > test-url: https://github.com/antonblanchard/will-it-scale Thanks for the report. Could you explain what kinds of workload you are testing? Does it calls frequently madvise(MADV_DONTNEED) in parallel on multiple threads? ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-08 2:28 ` Minchan Kim 2017-08-08 2:28 ` Minchan Kim @ 2017-08-08 4:23 ` Nadav Amit 2017-08-08 4:23 ` Nadav Amit 2017-08-08 5:51 ` Nadav Amit 1 sibling, 2 replies; 35+ messages in thread From: Nadav Amit @ 2017-08-08 4:23 UTC (permalink / raw) To: Minchan Kim Cc: kernel test robot, open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, lkp Minchan Kim <minchan@kernel.org> wrote: > Hi, > > On Tue, Aug 08, 2017 at 09:19:23AM +0800, kernel test robot wrote: >> Greeting, >> >> FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: >> >> >> commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") >> url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm-migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 >> >> >> in testcase: will-it-scale >> on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory >> with following parameters: >> >> nr_task: 16 >> mode: process >> test: brk1 >> cpufreq_governor: performance >> >> test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. >> test-url: https://github.com/antonblanchard/will-it-scale > > Thanks for the report. > Could you explain what kinds of workload you are testing? > > Does it calls frequently madvise(MADV_DONTNEED) in parallel on multiple > threads? According to the description it is "testcase:brk increase/decrease of one page”. According to the mode it spawns multiple processes, not threads. Since a single page is unmapped each time, and the iTLB-loads increase dramatically, I would suspect that for some reason a full TLB flush is caused during do_munmap(). If I find some free time, I’ll try to profile the workload - but feel free to beat me to it. Nadav -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@kvack.org. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a> ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-08 4:23 ` Nadav Amit @ 2017-08-08 4:23 ` Nadav Amit 2017-08-08 5:51 ` Nadav Amit 1 sibling, 0 replies; 35+ messages in thread From: Nadav Amit @ 2017-08-08 4:23 UTC (permalink / raw) To: Minchan Kim Cc: kernel test robot, open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, lkp Minchan Kim <minchan@kernel.org> wrote: > Hi, > > On Tue, Aug 08, 2017 at 09:19:23AM +0800, kernel test robot wrote: >> Greeting, >> >> FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: >> >> >> commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") >> url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm-migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 >> >> >> in testcase: will-it-scale >> on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory >> with following parameters: >> >> nr_task: 16 >> mode: process >> test: brk1 >> cpufreq_governor: performance >> >> test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. >> test-url: https://github.com/antonblanchard/will-it-scale > > Thanks for the report. > Could you explain what kinds of workload you are testing? > > Does it calls frequently madvise(MADV_DONTNEED) in parallel on multiple > threads? According to the description it is "testcase:brk increase/decrease of one page”. According to the mode it spawns multiple processes, not threads. Since a single page is unmapped each time, and the iTLB-loads increase dramatically, I would suspect that for some reason a full TLB flush is caused during do_munmap(). If I find some free time, I’ll try to profile the workload - but feel free to beat me to it. Nadav ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-08 4:23 ` Nadav Amit 2017-08-08 4:23 ` Nadav Amit @ 2017-08-08 5:51 ` Nadav Amit 2017-08-08 5:51 ` Nadav Amit 2017-08-08 8:08 ` Minchan Kim 1 sibling, 2 replies; 35+ messages in thread From: Nadav Amit @ 2017-08-08 5:51 UTC (permalink / raw) To: Minchan Kim Cc: kernel test robot, open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, lkp Nadav Amit <nadav.amit@gmail.com> wrote: > Minchan Kim <minchan@kernel.org> wrote: > >> Hi, >> >> On Tue, Aug 08, 2017 at 09:19:23AM +0800, kernel test robot wrote: >>> Greeting, >>> >>> FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: >>> >>> >>> commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") >>> url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm-migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 >>> >>> >>> in testcase: will-it-scale >>> on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory >>> with following parameters: >>> >>> nr_task: 16 >>> mode: process >>> test: brk1 >>> cpufreq_governor: performance >>> >>> test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. >>> test-url: https://github.com/antonblanchard/will-it-scale >> >> Thanks for the report. >> Could you explain what kinds of workload you are testing? >> >> Does it calls frequently madvise(MADV_DONTNEED) in parallel on multiple >> threads? > > According to the description it is "testcase:brk increase/decrease of one > page”. According to the mode it spawns multiple processes, not threads. > > Since a single page is unmapped each time, and the iTLB-loads increase > dramatically, I would suspect that for some reason a full TLB flush is > caused during do_munmap(). > > If I find some free time, I’ll try to profile the workload - but feel free > to beat me to it. The root-cause appears to be that tlb_finish_mmu() does not call dec_tlb_flush_pending() - as it should. Any chance you can take care of it? Having said that it appears that cpumask_any_but() is really inefficient since it does not have an optimization for the case in which small_const_nbits(nbits)==true. When I find some free time, I’ll try to deal with it. Thanks, Nadav -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@kvack.org. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a> ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-08 5:51 ` Nadav Amit @ 2017-08-08 5:51 ` Nadav Amit 2017-08-08 8:08 ` Minchan Kim 1 sibling, 0 replies; 35+ messages in thread From: Nadav Amit @ 2017-08-08 5:51 UTC (permalink / raw) To: Minchan Kim Cc: kernel test robot, open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, lkp Nadav Amit <nadav.amit@gmail.com> wrote: > Minchan Kim <minchan@kernel.org> wrote: > >> Hi, >> >> On Tue, Aug 08, 2017 at 09:19:23AM +0800, kernel test robot wrote: >>> Greeting, >>> >>> FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: >>> >>> >>> commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") >>> url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm-migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 >>> >>> >>> in testcase: will-it-scale >>> on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory >>> with following parameters: >>> >>> nr_task: 16 >>> mode: process >>> test: brk1 >>> cpufreq_governor: performance >>> >>> test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. >>> test-url: https://github.com/antonblanchard/will-it-scale >> >> Thanks for the report. >> Could you explain what kinds of workload you are testing? >> >> Does it calls frequently madvise(MADV_DONTNEED) in parallel on multiple >> threads? > > According to the description it is "testcase:brk increase/decrease of one > page”. According to the mode it spawns multiple processes, not threads. > > Since a single page is unmapped each time, and the iTLB-loads increase > dramatically, I would suspect that for some reason a full TLB flush is > caused during do_munmap(). > > If I find some free time, I’ll try to profile the workload - but feel free > to beat me to it. The root-cause appears to be that tlb_finish_mmu() does not call dec_tlb_flush_pending() - as it should. Any chance you can take care of it? Having said that it appears that cpumask_any_but() is really inefficient since it does not have an optimization for the case in which small_const_nbits(nbits)==true. When I find some free time, I’ll try to deal with it. Thanks, Nadav ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-08 5:51 ` Nadav Amit 2017-08-08 5:51 ` Nadav Amit @ 2017-08-08 8:08 ` Minchan Kim 2017-08-08 8:08 ` Minchan Kim ` (3 more replies) 1 sibling, 4 replies; 35+ messages in thread From: Minchan Kim @ 2017-08-08 8:08 UTC (permalink / raw) To: Nadav Amit Cc: kernel test robot, open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, lkp On Mon, Aug 07, 2017 at 10:51:00PM -0700, Nadav Amit wrote: > Nadav Amit <nadav.amit@gmail.com> wrote: > > > Minchan Kim <minchan@kernel.org> wrote: > > > >> Hi, > >> > >> On Tue, Aug 08, 2017 at 09:19:23AM +0800, kernel test robot wrote: > >>> Greeting, > >>> > >>> FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: > >>> > >>> > >>> commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") > >>> url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm-migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 > >>> > >>> > >>> in testcase: will-it-scale > >>> on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory > >>> with following parameters: > >>> > >>> nr_task: 16 > >>> mode: process > >>> test: brk1 > >>> cpufreq_governor: performance > >>> > >>> test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. > >>> test-url: https://github.com/antonblanchard/will-it-scale > >> > >> Thanks for the report. > >> Could you explain what kinds of workload you are testing? > >> > >> Does it calls frequently madvise(MADV_DONTNEED) in parallel on multiple > >> threads? > > > > According to the description it is "testcase:brk increase/decrease of one > > page”. According to the mode it spawns multiple processes, not threads. > > > > Since a single page is unmapped each time, and the iTLB-loads increase > > dramatically, I would suspect that for some reason a full TLB flush is > > caused during do_munmap(). > > > > If I find some free time, I’ll try to profile the workload - but feel free > > to beat me to it. > > The root-cause appears to be that tlb_finish_mmu() does not call > dec_tlb_flush_pending() - as it should. Any chance you can take care of it? Oops, but with second looking, it seems it's not my fault. ;-) https://marc.info/?l=linux-mm&m=150156699114088&w=2 Anyway, thanks for the pointing out. xiaolong.ye, could you retest with this fix? From 83012114c9cd9304f0d55d899bb4b9329d0e22ac Mon Sep 17 00:00:00 2001 From: Minchan Kim <minchan@kernel.org> Date: Tue, 8 Aug 2017 17:05:19 +0900 Subject: [PATCH] mm: decrease tlb flush pending count in tlb_finish_mmu The tlb pending count increased by tlb_gather_mmu should be decreased at tlb_finish_mmu. Otherwise, A lot of TLB happens which makes performance regression. Signed-off-by: Minchan Kim <minchan@kernel.org> --- mm/memory.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/memory.c b/mm/memory.c index 34b1fcb829e4..ad2617552f55 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -423,6 +423,7 @@ void tlb_finish_mmu(struct mmu_gather *tlb, bool force = mm_tlb_flush_nested(tlb->mm); arch_tlb_finish_mmu(tlb, start, end, force); + dec_tlb_flush_pending(tlb->mm); } /* -- 2.7.4 ^ permalink raw reply related [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-08 8:08 ` Minchan Kim @ 2017-08-08 8:08 ` Minchan Kim 2017-08-08 8:16 ` Nadav Amit ` (2 subsequent siblings) 3 siblings, 0 replies; 35+ messages in thread From: Minchan Kim @ 2017-08-08 8:08 UTC (permalink / raw) To: Nadav Amit Cc: kernel test robot, open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, lkp On Mon, Aug 07, 2017 at 10:51:00PM -0700, Nadav Amit wrote: > Nadav Amit <nadav.amit@gmail.com> wrote: > > > Minchan Kim <minchan@kernel.org> wrote: > > > >> Hi, > >> > >> On Tue, Aug 08, 2017 at 09:19:23AM +0800, kernel test robot wrote: > >>> Greeting, > >>> > >>> FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: > >>> > >>> > >>> commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") > >>> url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm-migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 > >>> > >>> > >>> in testcase: will-it-scale > >>> on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory > >>> with following parameters: > >>> > >>> nr_task: 16 > >>> mode: process > >>> test: brk1 > >>> cpufreq_governor: performance > >>> > >>> test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. > >>> test-url: https://github.com/antonblanchard/will-it-scale > >> > >> Thanks for the report. > >> Could you explain what kinds of workload you are testing? > >> > >> Does it calls frequently madvise(MADV_DONTNEED) in parallel on multiple > >> threads? > > > > According to the description it is "testcase:brk increase/decrease of one > > page”. According to the mode it spawns multiple processes, not threads. > > > > Since a single page is unmapped each time, and the iTLB-loads increase > > dramatically, I would suspect that for some reason a full TLB flush is > > caused during do_munmap(). > > > > If I find some free time, I’ll try to profile the workload - but feel free > > to beat me to it. > > The root-cause appears to be that tlb_finish_mmu() does not call > dec_tlb_flush_pending() - as it should. Any chance you can take care of it? Oops, but with second looking, it seems it's not my fault. ;-) https://marc.info/?l=linux-mm&m=150156699114088&w=2 Anyway, thanks for the pointing out. xiaolong.ye, could you retest with this fix? ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-08 8:08 ` Minchan Kim 2017-08-08 8:08 ` Minchan Kim @ 2017-08-08 8:16 ` Nadav Amit 2017-08-09 1:25 ` Ye Xiaolong 2017-08-09 2:59 ` Ye Xiaolong 3 siblings, 0 replies; 35+ messages in thread From: Nadav Amit @ 2017-08-08 8:16 UTC (permalink / raw) To: Minchan Kim Cc: linux-arch, Ingo Molnar, Jeff Dike, Andrew Morton, Martin Schwidefsky, Heiko Carstens, David S. Miller, lkp, Russell King, Tony Luck, Yoshinori Sato, open list:MEMORY MANAGEMENT, LKML, kernel test robot [-- Attachment #1: Type: text/plain, Size: 2250 bytes --] On Aug 8, 2017 01:08, "Minchan Kim" <minchan@kernel.org> wrote: On Mon, Aug 07, 2017 at 10:51:00PM -0700, Nadav Amit wrote: > Nadav Amit <nadav.amit@gmail.com> wrote: > > > Minchan Kim <minchan@kernel.org> wrote: > > > >> Hi, > >> > >> On Tue, Aug 08, 2017 at 09:19:23AM +0800, kernel test robot wrote: > >>> Greeting, > >>> > >>> FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: > >>> > >>> > >>> commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") > >>> url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm- migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 > >>> > >>> > >>> in testcase: will-it-scale > >>> on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory > >>> with following parameters: > >>> > >>> nr_task: 16 > >>> mode: process > >>> test: brk1 > >>> cpufreq_governor: performance > >>> > >>> test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. > >>> test-url: https://github.com/antonblanchard/will-it-scale > >> > >> Thanks for the report. > >> Could you explain what kinds of workload you are testing? > >> > >> Does it calls frequently madvise(MADV_DONTNEED) in parallel on multiple > >> threads? > > > > According to the description it is "testcase:brk increase/decrease of one > > page”. According to the mode it spawns multiple processes, not threads. > > > > Since a single page is unmapped each time, and the iTLB-loads increase > > dramatically, I would suspect that for some reason a full TLB flush is > > caused during do_munmap(). > > > > If I find some free time, I’ll try to profile the workload - but feel free > > to beat me to it. > > The root-cause appears to be that tlb_finish_mmu() does not call > dec_tlb_flush_pending() - as it should. Any chance you can take care of it? Oops, but with second looking, it seems it's not my fault. ;-) https://marc.info/?l=linux-mm&m=150156699114088&w=2 Err... Sorry for that... [-- Attachment #2: Type: text/html, Size: 3970 bytes --] ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-08 8:08 ` Minchan Kim 2017-08-08 8:08 ` Minchan Kim 2017-08-08 8:16 ` Nadav Amit @ 2017-08-09 1:25 ` Ye Xiaolong 2017-08-09 2:59 ` Ye Xiaolong 3 siblings, 0 replies; 35+ messages in thread From: Ye Xiaolong @ 2017-08-09 1:25 UTC (permalink / raw) To: Minchan Kim Cc: Nadav Amit, open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, lkp On 08/08, Minchan Kim wrote: >On Mon, Aug 07, 2017 at 10:51:00PM -0700, Nadav Amit wrote: >> Nadav Amit <nadav.amit@gmail.com> wrote: >> >> > Minchan Kim <minchan@kernel.org> wrote: >> > >> >> Hi, >> >> >> >> On Tue, Aug 08, 2017 at 09:19:23AM +0800, kernel test robot wrote: >> >>> Greeting, >> >>> >> >>> FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: >> >>> >> >>> >> >>> commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") >> >>> url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm-migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 >> >>> >> >>> >> >>> in testcase: will-it-scale >> >>> on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory >> >>> with following parameters: >> >>> >> >>> nr_task: 16 >> >>> mode: process >> >>> test: brk1 >> >>> cpufreq_governor: performance >> >>> >> >>> test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. >> >>> test-url: https://github.com/antonblanchard/will-it-scale >> >> >> >> Thanks for the report. >> >> Could you explain what kinds of workload you are testing? >> >> >> >> Does it calls frequently madvise(MADV_DONTNEED) in parallel on multiple >> >> threads? >> > >> > According to the description it is "testcase:brk increase/decrease of one >> > page”. According to the mode it spawns multiple processes, not threads. >> > >> > Since a single page is unmapped each time, and the iTLB-loads increase >> > dramatically, I would suspect that for some reason a full TLB flush is >> > caused during do_munmap(). >> > >> > If I find some free time, I’ll try to profile the workload - but feel free >> > to beat me to it. >> >> The root-cause appears to be that tlb_finish_mmu() does not call >> dec_tlb_flush_pending() - as it should. Any chance you can take care of it? > >Oops, but with second looking, it seems it's not my fault. ;-) >https://marc.info/?l=linux-mm&m=150156699114088&w=2 > >Anyway, thanks for the pointing out. >xiaolong.ye, could you retest with this fix? Sure, I'll provide the result later. Thanks, Xiaolong > From 83012114c9cd9304f0d55d899bb4b9329d0e22ac Mon Sep 17 00:00:00 2001 >From: Minchan Kim <minchan@kernel.org> >Date: Tue, 8 Aug 2017 17:05:19 +0900 >Subject: [PATCH] mm: decrease tlb flush pending count in tlb_finish_mmu > >The tlb pending count increased by tlb_gather_mmu should be decreased >at tlb_finish_mmu. Otherwise, A lot of TLB happens which makes >performance regression. > >Signed-off-by: Minchan Kim <minchan@kernel.org> >--- > mm/memory.c | 1 + > 1 file changed, 1 insertion(+) > >diff --git a/mm/memory.c b/mm/memory.c >index 34b1fcb829e4..ad2617552f55 100644 >--- a/mm/memory.c >+++ b/mm/memory.c >@@ -423,6 +423,7 @@ void tlb_finish_mmu(struct mmu_gather *tlb, > bool force = mm_tlb_flush_nested(tlb->mm); > > arch_tlb_finish_mmu(tlb, start, end, force); >+ dec_tlb_flush_pending(tlb->mm); > } > > /* >-- >2.7.4 > ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-08 8:08 ` Minchan Kim ` (2 preceding siblings ...) 2017-08-09 1:25 ` Ye Xiaolong @ 2017-08-09 2:59 ` Ye Xiaolong 2017-08-09 2:59 ` Ye Xiaolong 2017-08-10 4:13 ` Minchan Kim 3 siblings, 2 replies; 35+ messages in thread From: Ye Xiaolong @ 2017-08-09 2:59 UTC (permalink / raw) To: Minchan Kim Cc: Nadav Amit, open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, lkp On 08/08, Minchan Kim wrote: >On Mon, Aug 07, 2017 at 10:51:00PM -0700, Nadav Amit wrote: >> Nadav Amit <nadav.amit@gmail.com> wrote: >> >> > Minchan Kim <minchan@kernel.org> wrote: >> > >> >> Hi, >> >> >> >> On Tue, Aug 08, 2017 at 09:19:23AM +0800, kernel test robot wrote: >> >>> Greeting, >> >>> >> >>> FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: >> >>> >> >>> >> >>> commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") >> >>> url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm-migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 >> >>> >> >>> >> >>> in testcase: will-it-scale >> >>> on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory >> >>> with following parameters: >> >>> >> >>> nr_task: 16 >> >>> mode: process >> >>> test: brk1 >> >>> cpufreq_governor: performance >> >>> >> >>> test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. >> >>> test-url: https://github.com/antonblanchard/will-it-scale >> >> >> >> Thanks for the report. >> >> Could you explain what kinds of workload you are testing? >> >> >> >> Does it calls frequently madvise(MADV_DONTNEED) in parallel on multiple >> >> threads? >> > >> > According to the description it is "testcase:brk increase/decrease of one >> > page”. According to the mode it spawns multiple processes, not threads. >> > >> > Since a single page is unmapped each time, and the iTLB-loads increase >> > dramatically, I would suspect that for some reason a full TLB flush is >> > caused during do_munmap(). >> > >> > If I find some free time, I’ll try to profile the workload - but feel free >> > to beat me to it. >> >> The root-cause appears to be that tlb_finish_mmu() does not call >> dec_tlb_flush_pending() - as it should. Any chance you can take care of it? > >Oops, but with second looking, it seems it's not my fault. ;-) >https://marc.info/?l=linux-mm&m=150156699114088&w=2 > >Anyway, thanks for the pointing out. >xiaolong.ye, could you retest with this fix? > I've queued tests for 5 times and results show this patch (e8f682574e4 "mm: decrease tlb flush pending count in tlb_finish_mmu") does help recover the performance back. 378005bdbac0a2ec 76742700225cad9df49f053993 e8f682574e45b6406dadfffeb4 ---------------- -------------------------- -------------------------- %stddev change %stddev change %stddev \ | \ | \ 3405093 -19% 2747088 -2% 3348752 will-it-scale.per_process_ops 1280 ± 3% -2% 1257 ± 3% -6% 1207 vmstat.system.cs 2702 ± 18% 11% 3002 ± 19% 17% 3156 ± 18% numa-vmstat.node0.nr_mapped 10765 ± 18% 11% 11964 ± 19% 17% 12588 ± 18% numa-meminfo.node0.Mapped 0.00 ± 47% -40% 0.00 ± 45% -84% 0.00 ± 42% mpstat.cpu.soft% Thanks, Xiaolong From 83012114c9cd9304f0d55d899bb4b9329d0e22ac Mon Sep 17 00:00:00 2001 >From: Minchan Kim <minchan@kernel.org> >Date: Tue, 8 Aug 2017 17:05:19 +0900 >Subject: [PATCH] mm: decrease tlb flush pending count in tlb_finish_mmu > >The tlb pending count increased by tlb_gather_mmu should be decreased >at tlb_finish_mmu. Otherwise, A lot of TLB happens which makes >performance regression. > >Signed-off-by: Minchan Kim <minchan@kernel.org> >--- > mm/memory.c | 1 + > 1 file changed, 1 insertion(+) > >diff --git a/mm/memory.c b/mm/memory.c >index 34b1fcb829e4..ad2617552f55 100644 >--- a/mm/memory.c >+++ b/mm/memory.c >@@ -423,6 +423,7 @@ void tlb_finish_mmu(struct mmu_gather *tlb, > bool force = mm_tlb_flush_nested(tlb->mm); > > arch_tlb_finish_mmu(tlb, start, end, force); >+ dec_tlb_flush_pending(tlb->mm); > } > > /* >-- >2.7.4 > -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@kvack.org. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a> ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-09 2:59 ` Ye Xiaolong @ 2017-08-09 2:59 ` Ye Xiaolong 2017-08-10 4:13 ` Minchan Kim 1 sibling, 0 replies; 35+ messages in thread From: Ye Xiaolong @ 2017-08-09 2:59 UTC (permalink / raw) To: Minchan Kim Cc: Nadav Amit, open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, lkp On 08/08, Minchan Kim wrote: >On Mon, Aug 07, 2017 at 10:51:00PM -0700, Nadav Amit wrote: >> Nadav Amit <nadav.amit@gmail.com> wrote: >> >> > Minchan Kim <minchan@kernel.org> wrote: >> > >> >> Hi, >> >> >> >> On Tue, Aug 08, 2017 at 09:19:23AM +0800, kernel test robot wrote: >> >>> Greeting, >> >>> >> >>> FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: >> >>> >> >>> >> >>> commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") >> >>> url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm-migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 >> >>> >> >>> >> >>> in testcase: will-it-scale >> >>> on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory >> >>> with following parameters: >> >>> >> >>> nr_task: 16 >> >>> mode: process >> >>> test: brk1 >> >>> cpufreq_governor: performance >> >>> >> >>> test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. >> >>> test-url: https://github.com/antonblanchard/will-it-scale >> >> >> >> Thanks for the report. >> >> Could you explain what kinds of workload you are testing? >> >> >> >> Does it calls frequently madvise(MADV_DONTNEED) in parallel on multiple >> >> threads? >> > >> > According to the description it is "testcase:brk increase/decrease of one >> > page”. According to the mode it spawns multiple processes, not threads. >> > >> > Since a single page is unmapped each time, and the iTLB-loads increase >> > dramatically, I would suspect that for some reason a full TLB flush is >> > caused during do_munmap(). >> > >> > If I find some free time, I’ll try to profile the workload - but feel free >> > to beat me to it. >> >> The root-cause appears to be that tlb_finish_mmu() does not call >> dec_tlb_flush_pending() - as it should. Any chance you can take care of it? > >Oops, but with second looking, it seems it's not my fault. ;-) >https://marc.info/?l=linux-mm&m=150156699114088&w=2 > >Anyway, thanks for the pointing out. >xiaolong.ye, could you retest with this fix? > I've queued tests for 5 times and results show this patch (e8f682574e4 "mm: decrease tlb flush pending count in tlb_finish_mmu") does help recover the performance back. 378005bdbac0a2ec 76742700225cad9df49f053993 e8f682574e45b6406dadfffeb4 ---------------- -------------------------- -------------------------- %stddev change %stddev change %stddev \ | \ | \ 3405093 -19% 2747088 -2% 3348752 will-it-scale.per_process_ops 1280 ± 3% -2% 1257 ± 3% -6% 1207 vmstat.system.cs 2702 ± 18% 11% 3002 ± 19% 17% 3156 ± 18% numa-vmstat.node0.nr_mapped 10765 ± 18% 11% 11964 ± 19% 17% 12588 ± 18% numa-meminfo.node0.Mapped 0.00 ± 47% -40% 0.00 ± 45% -84% 0.00 ± 42% mpstat.cpu.soft% Thanks, Xiaolong From 83012114c9cd9304f0d55d899bb4b9329d0e22ac Mon Sep 17 00:00:00 2001 >From: Minchan Kim <minchan@kernel.org> >Date: Tue, 8 Aug 2017 17:05:19 +0900 >Subject: [PATCH] mm: decrease tlb flush pending count in tlb_finish_mmu > >The tlb pending count increased by tlb_gather_mmu should be decreased >at tlb_finish_mmu. Otherwise, A lot of TLB happens which makes >performance regression. > >Signed-off-by: Minchan Kim <minchan@kernel.org> >--- > mm/memory.c | 1 + > 1 file changed, 1 insertion(+) > >diff --git a/mm/memory.c b/mm/memory.c >index 34b1fcb829e4..ad2617552f55 100644 >--- a/mm/memory.c >+++ b/mm/memory.c >@@ -423,6 +423,7 @@ void tlb_finish_mmu(struct mmu_gather *tlb, > bool force = mm_tlb_flush_nested(tlb->mm); > > arch_tlb_finish_mmu(tlb, start, end, force); >+ dec_tlb_flush_pending(tlb->mm); > } > > /* >-- >2.7.4 > ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-09 2:59 ` Ye Xiaolong 2017-08-09 2:59 ` Ye Xiaolong @ 2017-08-10 4:13 ` Minchan Kim 2017-08-10 4:13 ` Minchan Kim 2017-08-10 4:14 ` Nadav Amit 1 sibling, 2 replies; 35+ messages in thread From: Minchan Kim @ 2017-08-10 4:13 UTC (permalink / raw) To: Ye Xiaolong Cc: Nadav Amit, open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, lkp On Wed, Aug 09, 2017 at 10:59:02AM +0800, Ye Xiaolong wrote: > On 08/08, Minchan Kim wrote: > >On Mon, Aug 07, 2017 at 10:51:00PM -0700, Nadav Amit wrote: > >> Nadav Amit <nadav.amit@gmail.com> wrote: > >> > >> > Minchan Kim <minchan@kernel.org> wrote: > >> > > >> >> Hi, > >> >> > >> >> On Tue, Aug 08, 2017 at 09:19:23AM +0800, kernel test robot wrote: > >> >>> Greeting, > >> >>> > >> >>> FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: > >> >>> > >> >>> > >> >>> commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") > >> >>> url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm-migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 > >> >>> > >> >>> > >> >>> in testcase: will-it-scale > >> >>> on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory > >> >>> with following parameters: > >> >>> > >> >>> nr_task: 16 > >> >>> mode: process > >> >>> test: brk1 > >> >>> cpufreq_governor: performance > >> >>> > >> >>> test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. > >> >>> test-url: https://github.com/antonblanchard/will-it-scale > >> >> > >> >> Thanks for the report. > >> >> Could you explain what kinds of workload you are testing? > >> >> > >> >> Does it calls frequently madvise(MADV_DONTNEED) in parallel on multiple > >> >> threads? > >> > > >> > According to the description it is "testcase:brk increase/decrease of one > >> > page”. According to the mode it spawns multiple processes, not threads. > >> > > >> > Since a single page is unmapped each time, and the iTLB-loads increase > >> > dramatically, I would suspect that for some reason a full TLB flush is > >> > caused during do_munmap(). > >> > > >> > If I find some free time, I’ll try to profile the workload - but feel free > >> > to beat me to it. > >> > >> The root-cause appears to be that tlb_finish_mmu() does not call > >> dec_tlb_flush_pending() - as it should. Any chance you can take care of it? > > > >Oops, but with second looking, it seems it's not my fault. ;-) > >https://marc.info/?l=linux-mm&m=150156699114088&w=2 > > > >Anyway, thanks for the pointing out. > >xiaolong.ye, could you retest with this fix? > > > > I've queued tests for 5 times and results show this patch (e8f682574e4 "mm: > decrease tlb flush pending count in tlb_finish_mmu") does help recover the > performance back. > > 378005bdbac0a2ec 76742700225cad9df49f053993 e8f682574e45b6406dadfffeb4 > ---------------- -------------------------- -------------------------- > %stddev change %stddev change %stddev > \ | \ | \ > 3405093 -19% 2747088 -2% 3348752 will-it-scale.per_process_ops > 1280 ± 3% -2% 1257 ± 3% -6% 1207 vmstat.system.cs > 2702 ± 18% 11% 3002 ± 19% 17% 3156 ± 18% numa-vmstat.node0.nr_mapped > 10765 ± 18% 11% 11964 ± 19% 17% 12588 ± 18% numa-meminfo.node0.Mapped > 0.00 ± 47% -40% 0.00 ± 45% -84% 0.00 ± 42% mpstat.cpu.soft% > > Thanks, > Xiaolong Thanks for the testing! ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-10 4:13 ` Minchan Kim @ 2017-08-10 4:13 ` Minchan Kim 2017-08-10 4:14 ` Nadav Amit 1 sibling, 0 replies; 35+ messages in thread From: Minchan Kim @ 2017-08-10 4:13 UTC (permalink / raw) To: Ye Xiaolong Cc: Nadav Amit, open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, lkp On Wed, Aug 09, 2017 at 10:59:02AM +0800, Ye Xiaolong wrote: > On 08/08, Minchan Kim wrote: > >On Mon, Aug 07, 2017 at 10:51:00PM -0700, Nadav Amit wrote: > >> Nadav Amit <nadav.amit@gmail.com> wrote: > >> > >> > Minchan Kim <minchan@kernel.org> wrote: > >> > > >> >> Hi, > >> >> > >> >> On Tue, Aug 08, 2017 at 09:19:23AM +0800, kernel test robot wrote: > >> >>> Greeting, > >> >>> > >> >>> FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: > >> >>> > >> >>> > >> >>> commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") > >> >>> url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm-migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 > >> >>> > >> >>> > >> >>> in testcase: will-it-scale > >> >>> on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory > >> >>> with following parameters: > >> >>> > >> >>> nr_task: 16 > >> >>> mode: process > >> >>> test: brk1 > >> >>> cpufreq_governor: performance > >> >>> > >> >>> test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. > >> >>> test-url: https://github.com/antonblanchard/will-it-scale > >> >> > >> >> Thanks for the report. > >> >> Could you explain what kinds of workload you are testing? > >> >> > >> >> Does it calls frequently madvise(MADV_DONTNEED) in parallel on multiple > >> >> threads? > >> > > >> > According to the description it is "testcase:brk increase/decrease of one > >> > page”. According to the mode it spawns multiple processes, not threads. > >> > > >> > Since a single page is unmapped each time, and the iTLB-loads increase > >> > dramatically, I would suspect that for some reason a full TLB flush is > >> > caused during do_munmap(). > >> > > >> > If I find some free time, I’ll try to profile the workload - but feel free > >> > to beat me to it. > >> > >> The root-cause appears to be that tlb_finish_mmu() does not call > >> dec_tlb_flush_pending() - as it should. Any chance you can take care of it? > > > >Oops, but with second looking, it seems it's not my fault. ;-) > >https://marc.info/?l=linux-mm&m=150156699114088&w=2 > > > >Anyway, thanks for the pointing out. > >xiaolong.ye, could you retest with this fix? > > > > I've queued tests for 5 times and results show this patch (e8f682574e4 "mm: > decrease tlb flush pending count in tlb_finish_mmu") does help recover the > performance back. > > 378005bdbac0a2ec 76742700225cad9df49f053993 e8f682574e45b6406dadfffeb4 > ---------------- -------------------------- -------------------------- > %stddev change %stddev change %stddev > \ | \ | \ > 3405093 -19% 2747088 -2% 3348752 will-it-scale.per_process_ops > 1280 ± 3% -2% 1257 ± 3% -6% 1207 vmstat.system.cs > 2702 ± 18% 11% 3002 ± 19% 17% 3156 ± 18% numa-vmstat.node0.nr_mapped > 10765 ± 18% 11% 11964 ± 19% 17% 12588 ± 18% numa-meminfo.node0.Mapped > 0.00 ± 47% -40% 0.00 ± 45% -84% 0.00 ± 42% mpstat.cpu.soft% > > Thanks, > Xiaolong Thanks for the testing! ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-10 4:13 ` Minchan Kim 2017-08-10 4:13 ` Minchan Kim @ 2017-08-10 4:14 ` Nadav Amit 2017-08-10 4:14 ` Nadav Amit 2017-08-10 4:20 ` Minchan Kim 1 sibling, 2 replies; 35+ messages in thread From: Nadav Amit @ 2017-08-10 4:14 UTC (permalink / raw) To: Minchan Kim Cc: Ye Xiaolong, open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, lkp Minchan Kim <minchan@kernel.org> wrote: > On Wed, Aug 09, 2017 at 10:59:02AM +0800, Ye Xiaolong wrote: >> On 08/08, Minchan Kim wrote: >>> On Mon, Aug 07, 2017 at 10:51:00PM -0700, Nadav Amit wrote: >>>> Nadav Amit <nadav.amit@gmail.com> wrote: >>>> >>>>> Minchan Kim <minchan@kernel.org> wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> On Tue, Aug 08, 2017 at 09:19:23AM +0800, kernel test robot wrote: >>>>>>> Greeting, >>>>>>> >>>>>>> FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: >>>>>>> >>>>>>> >>>>>>> commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") >>>>>>> url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm-migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 >>>>>>> >>>>>>> >>>>>>> in testcase: will-it-scale >>>>>>> on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory >>>>>>> with following parameters: >>>>>>> >>>>>>> nr_task: 16 >>>>>>> mode: process >>>>>>> test: brk1 >>>>>>> cpufreq_governor: performance >>>>>>> >>>>>>> test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. >>>>>>> test-url: https://github.com/antonblanchard/will-it-scale >>>>>> >>>>>> Thanks for the report. >>>>>> Could you explain what kinds of workload you are testing? >>>>>> >>>>>> Does it calls frequently madvise(MADV_DONTNEED) in parallel on multiple >>>>>> threads? >>>>> >>>>> According to the description it is "testcase:brk increase/decrease of one >>>>> page”. According to the mode it spawns multiple processes, not threads. >>>>> >>>>> Since a single page is unmapped each time, and the iTLB-loads increase >>>>> dramatically, I would suspect that for some reason a full TLB flush is >>>>> caused during do_munmap(). >>>>> >>>>> If I find some free time, I’ll try to profile the workload - but feel free >>>>> to beat me to it. >>>> >>>> The root-cause appears to be that tlb_finish_mmu() does not call >>>> dec_tlb_flush_pending() - as it should. Any chance you can take care of it? >>> >>> Oops, but with second looking, it seems it's not my fault. ;-) >>> https://marc.info/?l=linux-mm&m=150156699114088&w=2 >>> >>> Anyway, thanks for the pointing out. >>> xiaolong.ye, could you retest with this fix? >> >> I've queued tests for 5 times and results show this patch (e8f682574e4 "mm: >> decrease tlb flush pending count in tlb_finish_mmu") does help recover the >> performance back. >> >> 378005bdbac0a2ec 76742700225cad9df49f053993 e8f682574e45b6406dadfffeb4 >> ---------------- -------------------------- -------------------------- >> %stddev change %stddev change %stddev >> \ | \ | \ >> 3405093 -19% 2747088 -2% 3348752 will-it-scale.per_process_ops >> 1280 ± 3% -2% 1257 ± 3% -6% 1207 vmstat.system.cs >> 2702 ± 18% 11% 3002 ± 19% 17% 3156 ± 18% numa-vmstat.node0.nr_mapped >> 10765 ± 18% 11% 11964 ± 19% 17% 12588 ± 18% numa-meminfo.node0.Mapped >> 0.00 ± 47% -40% 0.00 ± 45% -84% 0.00 ± 42% mpstat.cpu.soft% >> >> Thanks, >> Xiaolong > > Thanks for the testing! Sorry again for screwing your patch, Minchan. -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@kvack.org. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a> ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-10 4:14 ` Nadav Amit @ 2017-08-10 4:14 ` Nadav Amit 2017-08-10 4:20 ` Minchan Kim 1 sibling, 0 replies; 35+ messages in thread From: Nadav Amit @ 2017-08-10 4:14 UTC (permalink / raw) To: Minchan Kim Cc: Ye Xiaolong, open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, lkp Minchan Kim <minchan@kernel.org> wrote: > On Wed, Aug 09, 2017 at 10:59:02AM +0800, Ye Xiaolong wrote: >> On 08/08, Minchan Kim wrote: >>> On Mon, Aug 07, 2017 at 10:51:00PM -0700, Nadav Amit wrote: >>>> Nadav Amit <nadav.amit@gmail.com> wrote: >>>> >>>>> Minchan Kim <minchan@kernel.org> wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> On Tue, Aug 08, 2017 at 09:19:23AM +0800, kernel test robot wrote: >>>>>>> Greeting, >>>>>>> >>>>>>> FYI, we noticed a -19.3% regression of will-it-scale.per_process_ops due to commit: >>>>>>> >>>>>>> >>>>>>> commit: 76742700225cad9df49f05399381ac3f1ec3dc60 ("mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem") >>>>>>> url: https://github.com/0day-ci/linux/commits/Nadav-Amit/mm-migrate-prevent-racy-access-to-tlb_flush_pending/20170802-205715 >>>>>>> >>>>>>> >>>>>>> in testcase: will-it-scale >>>>>>> on test machine: 88 threads Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz with 64G memory >>>>>>> with following parameters: >>>>>>> >>>>>>> nr_task: 16 >>>>>>> mode: process >>>>>>> test: brk1 >>>>>>> cpufreq_governor: performance >>>>>>> >>>>>>> test-description: Will It Scale takes a testcase and runs it from 1 through to n parallel copies to see if the testcase will scale. It builds both a process and threads based test in order to see any differences between the two. >>>>>>> test-url: https://github.com/antonblanchard/will-it-scale >>>>>> >>>>>> Thanks for the report. >>>>>> Could you explain what kinds of workload you are testing? >>>>>> >>>>>> Does it calls frequently madvise(MADV_DONTNEED) in parallel on multiple >>>>>> threads? >>>>> >>>>> According to the description it is "testcase:brk increase/decrease of one >>>>> page”. According to the mode it spawns multiple processes, not threads. >>>>> >>>>> Since a single page is unmapped each time, and the iTLB-loads increase >>>>> dramatically, I would suspect that for some reason a full TLB flush is >>>>> caused during do_munmap(). >>>>> >>>>> If I find some free time, I’ll try to profile the workload - but feel free >>>>> to beat me to it. >>>> >>>> The root-cause appears to be that tlb_finish_mmu() does not call >>>> dec_tlb_flush_pending() - as it should. Any chance you can take care of it? >>> >>> Oops, but with second looking, it seems it's not my fault. ;-) >>> https://marc.info/?l=linux-mm&m=150156699114088&w=2 >>> >>> Anyway, thanks for the pointing out. >>> xiaolong.ye, could you retest with this fix? >> >> I've queued tests for 5 times and results show this patch (e8f682574e4 "mm: >> decrease tlb flush pending count in tlb_finish_mmu") does help recover the >> performance back. >> >> 378005bdbac0a2ec 76742700225cad9df49f053993 e8f682574e45b6406dadfffeb4 >> ---------------- -------------------------- -------------------------- >> %stddev change %stddev change %stddev >> \ | \ | \ >> 3405093 -19% 2747088 -2% 3348752 will-it-scale.per_process_ops >> 1280 ± 3% -2% 1257 ± 3% -6% 1207 vmstat.system.cs >> 2702 ± 18% 11% 3002 ± 19% 17% 3156 ± 18% numa-vmstat.node0.nr_mapped >> 10765 ± 18% 11% 11964 ± 19% 17% 12588 ± 18% numa-meminfo.node0.Mapped >> 0.00 ± 47% -40% 0.00 ± 45% -84% 0.00 ± 42% mpstat.cpu.soft% >> >> Thanks, >> Xiaolong > > Thanks for the testing! Sorry again for screwing your patch, Minchan. ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression 2017-08-10 4:14 ` Nadav Amit 2017-08-10 4:14 ` Nadav Amit @ 2017-08-10 4:20 ` Minchan Kim 1 sibling, 0 replies; 35+ messages in thread From: Minchan Kim @ 2017-08-10 4:20 UTC (permalink / raw) To: Nadav Amit Cc: Ye Xiaolong, open list:MEMORY MANAGEMENT, LKML, Andrew Morton, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch, lkp On Wed, Aug 09, 2017 at 09:14:50PM -0700, Nadav Amit wrote: Hi Nadav, < snip > > >>>>> According to the description it is "testcase:brk increase/decrease of one > >>>>> page”. According to the mode it spawns multiple processes, not threads. > >>>>> > >>>>> Since a single page is unmapped each time, and the iTLB-loads increase > >>>>> dramatically, I would suspect that for some reason a full TLB flush is > >>>>> caused during do_munmap(). > >>>>> > >>>>> If I find some free time, I’ll try to profile the workload - but feel free > >>>>> to beat me to it. > >>>> > >>>> The root-cause appears to be that tlb_finish_mmu() does not call > >>>> dec_tlb_flush_pending() - as it should. Any chance you can take care of it? > >>> > >>> Oops, but with second looking, it seems it's not my fault. ;-) > >>> https://marc.info/?l=linux-mm&m=150156699114088&w=2 > >>> > >>> Anyway, thanks for the pointing out. > >>> xiaolong.ye, could you retest with this fix? > >> > >> I've queued tests for 5 times and results show this patch (e8f682574e4 "mm: > >> decrease tlb flush pending count in tlb_finish_mmu") does help recover the > >> performance back. > >> > >> 378005bdbac0a2ec 76742700225cad9df49f053993 e8f682574e45b6406dadfffeb4 > >> ---------------- -------------------------- -------------------------- > >> %stddev change %stddev change %stddev > >> \ | \ | \ > >> 3405093 -19% 2747088 -2% 3348752 will-it-scale.per_process_ops > >> 1280 ± 3% -2% 1257 ± 3% -6% 1207 vmstat.system.cs > >> 2702 ± 18% 11% 3002 ± 19% 17% 3156 ± 18% numa-vmstat.node0.nr_mapped > >> 10765 ± 18% 11% 11964 ± 19% 17% 12588 ± 18% numa-meminfo.node0.Mapped > >> 0.00 ± 47% -40% 0.00 ± 45% -84% 0.00 ± 42% mpstat.cpu.soft% > >> > >> Thanks, > >> Xiaolong > > > > Thanks for the testing! > > Sorry again for screwing your patch, Minchan. Never mind! It always happens. :) In this chance, I really appreciates your insight/testing/cooperation! ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem 2017-08-02 0:08 ` [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem Nadav Amit 2017-08-02 0:08 ` Nadav Amit 2017-08-08 1:19 ` [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression kernel test robot @ 2017-08-11 13:30 ` Peter Zijlstra 2017-08-11 13:30 ` Peter Zijlstra ` (2 more replies) 2 siblings, 3 replies; 35+ messages in thread From: Peter Zijlstra @ 2017-08-11 13:30 UTC (permalink / raw) To: Nadav Amit Cc: linux-mm, nadav.amit, linux-kernel, akpm, Minchan Kim, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch On Tue, Aug 01, 2017 at 05:08:17PM -0700, Nadav Amit wrote: > void tlb_finish_mmu(struct mmu_gather *tlb, > unsigned long start, unsigned long end) > { > - arch_tlb_finish_mmu(tlb, start, end); > + /* > + * If there are parallel threads are doing PTE changes on same range > + * under non-exclusive lock(e.g., mmap_sem read-side) but defer TLB > + * flush by batching, a thread has stable TLB entry can fail to flush > + * the TLB by observing pte_none|!pte_dirty, for example so flush TLB > + * forcefully if we detect parallel PTE batching threads. > + */ > + bool force = mm_tlb_flush_nested(tlb->mm); > + > + arch_tlb_finish_mmu(tlb, start, end, force); > } I don't understand the comment nor the ordering. What guarantees we see the increment if we need to? -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@kvack.org. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a> ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem 2017-08-11 13:30 ` [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem Peter Zijlstra @ 2017-08-11 13:30 ` Peter Zijlstra 2017-08-13 6:14 ` Nadav Amit 2017-08-14 1:26 ` Minchan Kim 2 siblings, 0 replies; 35+ messages in thread From: Peter Zijlstra @ 2017-08-11 13:30 UTC (permalink / raw) To: Nadav Amit Cc: linux-mm, nadav.amit, linux-kernel, akpm, Minchan Kim, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch On Tue, Aug 01, 2017 at 05:08:17PM -0700, Nadav Amit wrote: > void tlb_finish_mmu(struct mmu_gather *tlb, > unsigned long start, unsigned long end) > { > - arch_tlb_finish_mmu(tlb, start, end); > + /* > + * If there are parallel threads are doing PTE changes on same range > + * under non-exclusive lock(e.g., mmap_sem read-side) but defer TLB > + * flush by batching, a thread has stable TLB entry can fail to flush > + * the TLB by observing pte_none|!pte_dirty, for example so flush TLB > + * forcefully if we detect parallel PTE batching threads. > + */ > + bool force = mm_tlb_flush_nested(tlb->mm); > + > + arch_tlb_finish_mmu(tlb, start, end, force); > } I don't understand the comment nor the ordering. What guarantees we see the increment if we need to? ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem 2017-08-11 13:30 ` [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem Peter Zijlstra 2017-08-11 13:30 ` Peter Zijlstra @ 2017-08-13 6:14 ` Nadav Amit 2017-08-13 6:14 ` Nadav Amit 2017-08-13 12:08 ` Peter Zijlstra 2017-08-14 1:26 ` Minchan Kim 2 siblings, 2 replies; 35+ messages in thread From: Nadav Amit @ 2017-08-13 6:14 UTC (permalink / raw) To: Peter Zijlstra Cc: open list:MEMORY MANAGEMENT, Linux Kernel Mailing List, Andrew Morton, Minchan Kim, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch Peter Zijlstra <peterz@infradead.org> wrote: > On Tue, Aug 01, 2017 at 05:08:17PM -0700, Nadav Amit wrote: >> void tlb_finish_mmu(struct mmu_gather *tlb, >> unsigned long start, unsigned long end) >> { >> - arch_tlb_finish_mmu(tlb, start, end); >> + /* >> + * If there are parallel threads are doing PTE changes on same range >> + * under non-exclusive lock(e.g., mmap_sem read-side) but defer TLB >> + * flush by batching, a thread has stable TLB entry can fail to flush >> + * the TLB by observing pte_none|!pte_dirty, for example so flush TLB >> + * forcefully if we detect parallel PTE batching threads. >> + */ >> + bool force = mm_tlb_flush_nested(tlb->mm); >> + >> + arch_tlb_finish_mmu(tlb, start, end, force); >> } > > I don't understand the comment nor the ordering. What guarantees we see > the increment if we need to? The comment regards the problem that is described in the change-log, and a long thread that is referenced in it. So the question is whether “I don’t understand” means “I don’t understand” or “it is not clear enough”. I’ll be glad to address either one - just say which. As for the ordering - I tried to clarify it in the thread of the commit. Let me know if it is clear now. Regards, Nadav ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem 2017-08-13 6:14 ` Nadav Amit @ 2017-08-13 6:14 ` Nadav Amit 2017-08-13 12:08 ` Peter Zijlstra 1 sibling, 0 replies; 35+ messages in thread From: Nadav Amit @ 2017-08-13 6:14 UTC (permalink / raw) To: Peter Zijlstra Cc: open list:MEMORY MANAGEMENT, Linux Kernel Mailing List, Andrew Morton, Minchan Kim, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch Peter Zijlstra <peterz@infradead.org> wrote: > On Tue, Aug 01, 2017 at 05:08:17PM -0700, Nadav Amit wrote: >> void tlb_finish_mmu(struct mmu_gather *tlb, >> unsigned long start, unsigned long end) >> { >> - arch_tlb_finish_mmu(tlb, start, end); >> + /* >> + * If there are parallel threads are doing PTE changes on same range >> + * under non-exclusive lock(e.g., mmap_sem read-side) but defer TLB >> + * flush by batching, a thread has stable TLB entry can fail to flush >> + * the TLB by observing pte_none|!pte_dirty, for example so flush TLB >> + * forcefully if we detect parallel PTE batching threads. >> + */ >> + bool force = mm_tlb_flush_nested(tlb->mm); >> + >> + arch_tlb_finish_mmu(tlb, start, end, force); >> } > > I don't understand the comment nor the ordering. What guarantees we see > the increment if we need to? The comment regards the problem that is described in the change-log, and a long thread that is referenced in it. So the question is whether “I don’t understand” means “I don’t understand” or “it is not clear enough”. I’ll be glad to address either one - just say which. As for the ordering - I tried to clarify it in the thread of the commit. Let me know if it is clear now. Regards, Nadav ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem 2017-08-13 6:14 ` Nadav Amit 2017-08-13 6:14 ` Nadav Amit @ 2017-08-13 12:08 ` Peter Zijlstra 2017-08-13 12:08 ` Peter Zijlstra 1 sibling, 1 reply; 35+ messages in thread From: Peter Zijlstra @ 2017-08-13 12:08 UTC (permalink / raw) To: Nadav Amit Cc: open list:MEMORY MANAGEMENT, Linux Kernel Mailing List, Andrew Morton, Minchan Kim, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch On Sun, Aug 13, 2017 at 06:14:21AM +0000, Nadav Amit wrote: > Peter Zijlstra <peterz@infradead.org> wrote: > > > On Tue, Aug 01, 2017 at 05:08:17PM -0700, Nadav Amit wrote: > >> void tlb_finish_mmu(struct mmu_gather *tlb, > >> unsigned long start, unsigned long end) > >> { > >> - arch_tlb_finish_mmu(tlb, start, end); > >> + /* > >> + * If there are parallel threads are doing PTE changes on same range > >> + * under non-exclusive lock(e.g., mmap_sem read-side) but defer TLB > >> + * flush by batching, a thread has stable TLB entry can fail to flush > >> + * the TLB by observing pte_none|!pte_dirty, for example so flush TLB > >> + * forcefully if we detect parallel PTE batching threads. > >> + */ > >> + bool force = mm_tlb_flush_nested(tlb->mm); > >> + > >> + arch_tlb_finish_mmu(tlb, start, end, force); > >> } > > > > I don't understand the comment nor the ordering. What guarantees we see > > the increment if we need to? > > The comment regards the problem that is described in the change-log, and a > long thread that is referenced in it. So the question is whether “I don’t > understand” means “I don’t understand” or “it is not clear enough”. I’ll > be glad to address either one - just say which. I only read the comment, that _should_ be sufficient. Comments that rely on Changelogs and random threads are useless. The comment on its own simply doesn't make sense. > As for the ordering - I tried to clarify it in the thread of the commit. Let > me know if it is clear now. Yeah, I'll do a new patch because if it only cares about _the_ PTL, we can do away with that extra smp_mb__after_atomic(). -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@kvack.org. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a> ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem 2017-08-13 12:08 ` Peter Zijlstra @ 2017-08-13 12:08 ` Peter Zijlstra 0 siblings, 0 replies; 35+ messages in thread From: Peter Zijlstra @ 2017-08-13 12:08 UTC (permalink / raw) To: Nadav Amit Cc: open list:MEMORY MANAGEMENT, Linux Kernel Mailing List, Andrew Morton, Minchan Kim, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch On Sun, Aug 13, 2017 at 06:14:21AM +0000, Nadav Amit wrote: > Peter Zijlstra <peterz@infradead.org> wrote: > > > On Tue, Aug 01, 2017 at 05:08:17PM -0700, Nadav Amit wrote: > >> void tlb_finish_mmu(struct mmu_gather *tlb, > >> unsigned long start, unsigned long end) > >> { > >> - arch_tlb_finish_mmu(tlb, start, end); > >> + /* > >> + * If there are parallel threads are doing PTE changes on same range > >> + * under non-exclusive lock(e.g., mmap_sem read-side) but defer TLB > >> + * flush by batching, a thread has stable TLB entry can fail to flush > >> + * the TLB by observing pte_none|!pte_dirty, for example so flush TLB > >> + * forcefully if we detect parallel PTE batching threads. > >> + */ > >> + bool force = mm_tlb_flush_nested(tlb->mm); > >> + > >> + arch_tlb_finish_mmu(tlb, start, end, force); > >> } > > > > I don't understand the comment nor the ordering. What guarantees we see > > the increment if we need to? > > The comment regards the problem that is described in the change-log, and a > long thread that is referenced in it. So the question is whether “I don’t > understand” means “I don’t understand” or “it is not clear enough”. I’ll > be glad to address either one - just say which. I only read the comment, that _should_ be sufficient. Comments that rely on Changelogs and random threads are useless. The comment on its own simply doesn't make sense. > As for the ordering - I tried to clarify it in the thread of the commit. Let > me know if it is clear now. Yeah, I'll do a new patch because if it only cares about _the_ PTL, we can do away with that extra smp_mb__after_atomic(). ^ permalink raw reply [flat|nested] 35+ messages in thread
* Re: [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem 2017-08-11 13:30 ` [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem Peter Zijlstra 2017-08-11 13:30 ` Peter Zijlstra 2017-08-13 6:14 ` Nadav Amit @ 2017-08-14 1:26 ` Minchan Kim 2017-08-14 1:26 ` Minchan Kim 2 siblings, 1 reply; 35+ messages in thread From: Minchan Kim @ 2017-08-14 1:26 UTC (permalink / raw) To: Peter Zijlstra Cc: Nadav Amit, linux-mm, nadav.amit, linux-kernel, akpm, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch Hi Peter, On Fri, Aug 11, 2017 at 03:30:20PM +0200, Peter Zijlstra wrote: > On Tue, Aug 01, 2017 at 05:08:17PM -0700, Nadav Amit wrote: > > void tlb_finish_mmu(struct mmu_gather *tlb, > > unsigned long start, unsigned long end) > > { > > - arch_tlb_finish_mmu(tlb, start, end); > > + /* > > + * If there are parallel threads are doing PTE changes on same range > > + * under non-exclusive lock(e.g., mmap_sem read-side) but defer TLB > > + * flush by batching, a thread has stable TLB entry can fail to flush > > + * the TLB by observing pte_none|!pte_dirty, for example so flush TLB > > + * forcefully if we detect parallel PTE batching threads. > > + */ > > + bool force = mm_tlb_flush_nested(tlb->mm); > > + > > + arch_tlb_finish_mmu(tlb, start, end, force); > > } > > I don't understand the comment nor the ordering. What guarantees we see > the increment if we need to? How about this about commenting part? From 05f06fd6aba14447a9ca2df8b810fbcf9a58e14b Mon Sep 17 00:00:00 2001 From: Minchan Kim <minchan@kernel.org> Date: Mon, 14 Aug 2017 10:16:56 +0900 Subject: [PATCH] mm: add describable comment for TLB batch race [1] is a rather subtle/complicated bug so that it's hard to understand it with limited code comment. This patch adds a sequence diagaram to explain the problem more easily, I hope. [1] 99baac21e458, mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem Cc: Peter Zijlstra <peterz@infradead.org> Cc: Nadav Amit <namit@vmware.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Minchan Kim <minchan@kernel.org> --- mm/memory.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/mm/memory.c b/mm/memory.c index bcbe56f52163..f571b0eb9816 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -413,12 +413,37 @@ void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) { + + /* * If there are parallel threads are doing PTE changes on same range * under non-exclusive lock(e.g., mmap_sem read-side) but defer TLB * flush by batching, a thread has stable TLB entry can fail to flush * the TLB by observing pte_none|!pte_dirty, for example so flush TLB * forcefully if we detect parallel PTE batching threads. + * + * Example: MADV_DONTNEED stale TLB problem on same range + * + * CPU 0 CPU 1 + * *a = 1; + * MADV_DONTNEED + * MADV_DONTNEED tlb_gather_mmu + * tlb_gather_mmu + * down_read(mmap_sem) down_read(mmap_sem) + * pte_lock + * pte_get_and_clear + * tlb_remove_tlb_entry + * pte_unlock + * pte_lock + * found out the pte is none + * pte_unlock + * tlb_finish_mmu doesn't flush + * + * Access the address with stale TLB + * *a = 2;ie, success without segfault + * tlb_finish_mmu flush on range + * but it is too late. + * */ bool force = mm_tlb_flush_nested(tlb->mm); -- 2.7.4 ^ permalink raw reply related [flat|nested] 35+ messages in thread
* Re: [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem 2017-08-14 1:26 ` Minchan Kim @ 2017-08-14 1:26 ` Minchan Kim 0 siblings, 0 replies; 35+ messages in thread From: Minchan Kim @ 2017-08-14 1:26 UTC (permalink / raw) To: Peter Zijlstra Cc: Nadav Amit, linux-mm, nadav.amit, linux-kernel, akpm, Ingo Molnar, Russell King, Tony Luck, Martin Schwidefsky, David S. Miller, Heiko Carstens, Yoshinori Sato, Jeff Dike, linux-arch Hi Peter, On Fri, Aug 11, 2017 at 03:30:20PM +0200, Peter Zijlstra wrote: > On Tue, Aug 01, 2017 at 05:08:17PM -0700, Nadav Amit wrote: > > void tlb_finish_mmu(struct mmu_gather *tlb, > > unsigned long start, unsigned long end) > > { > > - arch_tlb_finish_mmu(tlb, start, end); > > + /* > > + * If there are parallel threads are doing PTE changes on same range > > + * under non-exclusive lock(e.g., mmap_sem read-side) but defer TLB > > + * flush by batching, a thread has stable TLB entry can fail to flush > > + * the TLB by observing pte_none|!pte_dirty, for example so flush TLB > > + * forcefully if we detect parallel PTE batching threads. > > + */ > > + bool force = mm_tlb_flush_nested(tlb->mm); > > + > > + arch_tlb_finish_mmu(tlb, start, end, force); > > } > > I don't understand the comment nor the ordering. What guarantees we see > the increment if we need to? How about this about commenting part? ^ permalink raw reply [flat|nested] 35+ messages in thread
end of thread, other threads:[~2017-08-14 1:26 UTC | newest]
Thread overview: 35+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20170802000818.4760-1-namit@vmware.com>
2017-08-02 0:08 ` [PATCH v6 4/7] mm: refactoring TLB gathering API Nadav Amit
2017-08-02 0:08 ` Nadav Amit
2017-08-11 9:23 ` Peter Zijlstra
2017-08-11 9:23 ` Peter Zijlstra
2017-08-11 17:12 ` Nadav Amit
2017-08-11 17:12 ` Nadav Amit
2017-08-14 0:49 ` Minchan Kim
2017-08-02 0:08 ` [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem Nadav Amit
2017-08-02 0:08 ` Nadav Amit
2017-08-08 1:19 ` [lkp-robot] [mm] 7674270022: will-it-scale.per_process_ops -19.3% regression kernel test robot
2017-08-08 2:28 ` Minchan Kim
2017-08-08 2:28 ` Minchan Kim
2017-08-08 4:23 ` Nadav Amit
2017-08-08 4:23 ` Nadav Amit
2017-08-08 5:51 ` Nadav Amit
2017-08-08 5:51 ` Nadav Amit
2017-08-08 8:08 ` Minchan Kim
2017-08-08 8:08 ` Minchan Kim
2017-08-08 8:16 ` Nadav Amit
2017-08-09 1:25 ` Ye Xiaolong
2017-08-09 2:59 ` Ye Xiaolong
2017-08-09 2:59 ` Ye Xiaolong
2017-08-10 4:13 ` Minchan Kim
2017-08-10 4:13 ` Minchan Kim
2017-08-10 4:14 ` Nadav Amit
2017-08-10 4:14 ` Nadav Amit
2017-08-10 4:20 ` Minchan Kim
2017-08-11 13:30 ` [PATCH v6 6/7] mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem Peter Zijlstra
2017-08-11 13:30 ` Peter Zijlstra
2017-08-13 6:14 ` Nadav Amit
2017-08-13 6:14 ` Nadav Amit
2017-08-13 12:08 ` Peter Zijlstra
2017-08-13 12:08 ` Peter Zijlstra
2017-08-14 1:26 ` Minchan Kim
2017-08-14 1:26 ` Minchan Kim
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).