From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guo Ren Subject: Re: [PATCH V3 21/26] dt-bindings: interrupt-controller: C-SKY APB intc Date: Thu, 6 Sep 2018 10:12:54 +0800 Message-ID: <20180906021254.GC29405@guoren-Inspiron-7460> References: <62dae1828ade759584bbf1507fe4a9e69d247a50.1536138304.git.ren_guo@c-sky.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: Rob Herring Cc: linux-arch@vger.kernel.org, Linux Kernel Mailing List , Thomas Gleixner , Daniel Lezcano , Jason Cooper , Arnd Bergmann , c-sky_gcc_upstream@c-sky.com, gnu-csky@mentor.com, thomas.petazzoni@bootlin.com, wbx@uclibc-ng.org, Greentime Hu List-Id: linux-arch.vger.kernel.org On Wed, Sep 05, 2018 at 07:43:10PM -0500, Rob Herring wrote: > On Wed, Sep 5, 2018 at 7:10 AM Guo Ren wrote: > > > > Signed-off-by: Guo Ren > > --- > > .../interrupt-controller/csky,apb-intc.txt | 45 ++++++++++++++++++++++ > > 1 file changed, 45 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt > > > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt > > new file mode 100644 > > index 0000000..faa482c > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt > > @@ -0,0 +1,45 @@ > > +============================== > > +C-SKY APB Interrupt Controller > > +============================== > > + > > +C-SKY APB Interrupt Controller is a simple soc interrupt controller > > +on the apb bus and we only use it as root irq controller. > > + > > + - csky,apb-intc is used in a lot of csky fpgas and socs, it support 64 irq nums. > > + - csky,dual-apb-intc consists of 2 apb-intc and 128 irq nums supported. > > Can't this be described in DT as 2 csky,apb-intc nodes? In detail, dual-apb-intc is not the same as two apb-intc, so I still want to name them separately, so I will keep this and it is clearer. > > + - compatible > > + Usage: required > > + Value type: > > + Definition: must be "csky,apb-intc" > > + "csky,dual-apb-intc" > > + "csky,gx6605s-intc" > > + - interrupt-cells > > #interrupt-cells Yes, I forgot #. - #interrupt-cells > > + Usage: required > > + Value type: > > + Definition: must be <1> > > No edge or level configuration? No, also no support in hardware. > > + > > + intc: interrupt-controller { > > Needs a unit-address. Ok, change it to: intc: interrupt-controller@0x00500000 { Guo Ren From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from smtp2200-217.mail.aliyun.com ([121.197.200.217]:38007 "EHLO smtp2200-217.mail.aliyun.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1725850AbeIFGqJ (ORCPT ); Thu, 6 Sep 2018 02:46:09 -0400 Date: Thu, 6 Sep 2018 10:12:54 +0800 From: Guo Ren Subject: Re: [PATCH V3 21/26] dt-bindings: interrupt-controller: C-SKY APB intc Message-ID: <20180906021254.GC29405@guoren-Inspiron-7460> References: <62dae1828ade759584bbf1507fe4a9e69d247a50.1536138304.git.ren_guo@c-sky.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: Sender: linux-arch-owner@vger.kernel.org List-ID: To: Rob Herring Cc: linux-arch@vger.kernel.org, Linux Kernel Mailing List , Thomas Gleixner , Daniel Lezcano , Jason Cooper , Arnd Bergmann , c-sky_gcc_upstream@c-sky.com, gnu-csky@mentor.com, thomas.petazzoni@bootlin.com, wbx@uclibc-ng.org, Greentime Hu Message-ID: <20180906021254.oSQbIv2mvsiuQVNRsCVLCDPm3f9uSoFeobJlt1XpHI0@z> On Wed, Sep 05, 2018 at 07:43:10PM -0500, Rob Herring wrote: > On Wed, Sep 5, 2018 at 7:10 AM Guo Ren wrote: > > > > Signed-off-by: Guo Ren > > --- > > .../interrupt-controller/csky,apb-intc.txt | 45 ++++++++++++++++++++++ > > 1 file changed, 45 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt > > > > diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt > > new file mode 100644 > > index 0000000..faa482c > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/interrupt-controller/csky,apb-intc.txt > > @@ -0,0 +1,45 @@ > > +============================== > > +C-SKY APB Interrupt Controller > > +============================== > > + > > +C-SKY APB Interrupt Controller is a simple soc interrupt controller > > +on the apb bus and we only use it as root irq controller. > > + > > + - csky,apb-intc is used in a lot of csky fpgas and socs, it support 64 irq nums. > > + - csky,dual-apb-intc consists of 2 apb-intc and 128 irq nums supported. > > Can't this be described in DT as 2 csky,apb-intc nodes? In detail, dual-apb-intc is not the same as two apb-intc, so I still want to name them separately, so I will keep this and it is clearer. > > + - compatible > > + Usage: required > > + Value type: > > + Definition: must be "csky,apb-intc" > > + "csky,dual-apb-intc" > > + "csky,gx6605s-intc" > > + - interrupt-cells > > #interrupt-cells Yes, I forgot #. - #interrupt-cells > > + Usage: required > > + Value type: > > + Definition: must be <1> > > No edge or level configuration? No, also no support in hardware. > > + > > + intc: interrupt-controller { > > Needs a unit-address. Ok, change it to: intc: interrupt-controller@0x00500000 { Guo Ren