From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga17.intel.com ([192.55.52.151]:23017 "EHLO mga17.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726742AbeJEFZv (ORCPT ); Fri, 5 Oct 2018 01:25:51 -0400 From: "H. Peter Anvin (Intel)" Subject: [PATCH 3/5] arch/mips, termios: use Date: Thu, 4 Oct 2018 15:29:51 -0700 Message-ID: <20181004222953.2229-4-hpa@zytor.com> In-Reply-To: <20181004222953.2229-1-hpa@zytor.com> References: <20181004222953.2229-1-hpa@zytor.com> Sender: linux-arch-owner@vger.kernel.org List-ID: To: linux-kernel@vger.kernel.org, linux-arch@vger.kernel.org, linux-serial@vger.kernel.org Cc: "H. Peter Anvin (Intel)" , Ralf Baechle , Paul Burton , James Hogan , Philippe Ombredanne , Greg Kroah-Hartman , Kate Stewart , Thomas Gleixner , linux-mips@linux-mips.org, Jiri Slaby Message-ID: <20181004222951.7gkpF-4jPi9TDT0GUeLFRdW50hI_VacVeCSN0ozMSwo@z> The MIPS definition of termbits.h is almost identical to the generic one, so use the generic one and only redefine a handful of constants. Move TIOCSER_TEMT to ioctls.h where it lives for all other architectures. Signed-off-by: H. Peter Anvin (Intel) Cc: Ralf Baechle Cc: Paul Burton Cc: James Hogan Cc: Philippe Ombredanne Cc: Greg Kroah-Hartman Cc: Kate Stewart Cc: Thomas Gleixner Cc: Cc: Greg Kroah-Hartman Cc: Jiri Slaby --- arch/mips/include/uapi/asm/ioctls.h | 2 + arch/mips/include/uapi/asm/termbits.h | 213 +++------------------------------- 2 files changed, 15 insertions(+), 200 deletions(-) diff --git a/arch/mips/include/uapi/asm/ioctls.h b/arch/mips/include/uapi/asm/ioctls.h index 890245a9f0c4..a4e11e1438b5 100644 --- a/arch/mips/include/uapi/asm/ioctls.h +++ b/arch/mips/include/uapi/asm/ioctls.h @@ -114,4 +114,6 @@ #define TIOCMIWAIT 0x5491 /* wait for a change on serial input line(s) */ #define TIOCGICOUNT 0x5492 /* read serial port inline interrupt counts */ +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + #endif /* __ASM_IOCTLS_H */ diff --git a/arch/mips/include/uapi/asm/termbits.h b/arch/mips/include/uapi/asm/termbits.h index dfeffba729b7..a08fa0a697f5 100644 --- a/arch/mips/include/uapi/asm/termbits.h +++ b/arch/mips/include/uapi/asm/termbits.h @@ -11,218 +11,31 @@ #ifndef _ASM_TERMBITS_H #define _ASM_TERMBITS_H -#include +#define NCCS 23 +#include -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -/* - * The ABI says nothing about NCC but seems to use NCCS as - * replacement for it in struct termio - */ -#define NCCS 23 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 /* Interrupt character [ISIG]. */ -#define VQUIT 1 /* Quit character [ISIG]. */ -#define VERASE 2 /* Erase character [ICANON]. */ -#define VKILL 3 /* Kill-line character [ICANON]. */ +/* c_cc characters that differ from the generic ABI */ +#undef VMIN #define VMIN 4 /* Minimum number of bytes read at once [!ICANON]. */ -#define VTIME 5 /* Time-out value (tenths of a second) [!ICANON]. */ +#undef VEOL2 #define VEOL2 6 /* Second EOL character [ICANON]. */ -#define VSWTC 7 /* ??? */ -#define VSWTCH VSWTC -#define VSTART 8 /* Start (X-ON) character [IXON, IXOFF]. */ -#define VSTOP 9 /* Stop (X-OFF) character [IXON, IXOFF]. */ -#define VSUSP 10 /* Suspend character [ISIG]. */ -#if 0 -/* - * VDSUSP is not supported - */ -#define VDSUSP 11 /* Delayed suspend character [ISIG]. */ -#endif -#define VREPRINT 12 /* Reprint-line character [ICANON]. */ -#define VDISCARD 13 /* Discard character [IEXTEN]. */ -#define VWERASE 14 /* Word-erase character [ICANON]. */ -#define VLNEXT 15 /* Literal-next character [IEXTEN]. */ +#undef VEOF #define VEOF 16 /* End-of-file character [ICANON]. */ +#undef VEOL #define VEOL 17 /* End-of-line character [ICANON]. */ -/* c_iflag bits */ -#define IGNBRK 0000001 /* Ignore break condition. */ -#define BRKINT 0000002 /* Signal interrupt on break. */ -#define IGNPAR 0000004 /* Ignore characters with parity errors. */ -#define PARMRK 0000010 /* Mark parity and framing errors. */ -#define INPCK 0000020 /* Enable input parity check. */ -#define ISTRIP 0000040 /* Strip 8th bit off characters. */ -#define INLCR 0000100 /* Map NL to CR on input. */ -#define IGNCR 0000200 /* Ignore CR. */ -#define ICRNL 0000400 /* Map CR to NL on input. */ -#define IUCLC 0001000 /* Map upper case to lower case on input. */ -#define IXON 0002000 /* Enable start/stop output control. */ -#define IXANY 0004000 /* Any character will restart after stop. */ -#define IXOFF 0010000 /* Enable start/stop input control. */ -#define IMAXBEL 0020000 /* Ring bell when input queue is full. */ -#define IUTF8 0040000 /* Input is UTF-8 */ - -/* c_oflag bits */ -#define OPOST 0000001 /* Perform output processing. */ -#define OLCUC 0000002 /* Map lower case to upper case on output. */ -#define ONLCR 0000004 /* Map NL to CR-NL on output. */ -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 -/* -#define PAGEOUT ??? -#define WRAP ??? - */ - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 /* Number of bits per byte (mask). */ -#define CS5 0000000 /* 5 bits per byte. */ -#define CS6 0000020 /* 6 bits per byte. */ -#define CS7 0000040 /* 7 bits per byte. */ -#define CS8 0000060 /* 8 bits per byte. */ -#define CSTOPB 0000100 /* Two stop bits instead of one. */ -#define CREAD 0000200 /* Enable receiver. */ -#define PARENB 0000400 /* Parity enable. */ -#define PARODD 0001000 /* Odd parity instead of even. */ -#define HUPCL 0002000 /* Hang up on last close. */ -#define CLOCAL 0004000 /* Ignore modem status lines. */ -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 /* Enable signals. */ -#define ICANON 0000002 /* Do erase and kill processing. */ -#define XCASE 0000004 -#define ECHO 0000010 /* Enable echo. */ -#define ECHOE 0000020 /* Visual erase for ERASE. */ -#define ECHOK 0000040 /* Echo NL after KILL. */ -#define ECHONL 0000100 /* Echo NL even if ECHO is off. */ -#define NOFLSH 0000200 /* Disable flush after interrupt. */ +/* c_lflag bits that differ from the generic ABI */ +#undef IEXTEN #define IEXTEN 0000400 /* Enable DISCARD and LNEXT. */ -#define ECHOCTL 0001000 /* Echo control characters as ^X. */ -#define ECHOPRT 0002000 /* Hardcopy visual erase. */ -#define ECHOKE 0004000 /* Visual erase for KILL. */ -#define FLUSHO 0020000 -#define PENDIN 0040000 /* Retype pending input (state). */ +#undef TOSTOP #define TOSTOP 0100000 /* Send SIGTTOU for background output. */ -#define ITOSTOP TOSTOP -#define EXTPROC 0200000 /* External processing on pty */ - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 /* Suspend output. */ -#define TCOON 1 /* Restart suspended output. */ -#define TCIOFF 2 /* Send a STOP character. */ -#define TCION 3 /* Send a START character. */ - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 /* Discard data received but not yet read. */ -#define TCOFLUSH 1 /* Discard data written but not yet sent. */ -#define TCIOFLUSH 2 /* Discard all pending data. */ /* tcsetattr uses these */ +#undef TCSANOW #define TCSANOW TCSETS /* Change immediately. */ +#undef TCSADRAIN #define TCSADRAIN TCSETSW /* Change when pending output is written. */ +#undef TCSAFLUSH #define TCSAFLUSH TCSETSF /* Flush pending input before changing. */ #endif /* _ASM_TERMBITS_H */ -- 2.14.4