* [PATCH] mm/sparse: cleanup the code surrounding memory_present()
@ 2020-07-12 8:31 Mike Rapoport
0 siblings, 0 replies; only message in thread
From: Mike Rapoport @ 2020-07-12 8:31 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-arch, linux-doc, linux-mm, linux-kernel, Mike Rapoport
From: Mike Rapoport <rppt@linux.ibm.com>
After removal of CONFIG_HAVE_MEMBLOCK_NODE_MAP we have two equivalent
functions that call memory_present() for each region in memblock.memory:
sparse_memory_present_with_active_regions() and membocks_present().
Moreover, all architectures have a call to either of these functions
preceding the call to sparse_init() and in the most cases they are called
one after the other.
Mark the regions from memblock.memory as present during sparce_init() by
making sparse_init() call memblocks_present(), make memblocks_present() and
memory_present() functions static and remove redundant
sparse_memory_present_with_active_regions() function.
Also remove no longer required HAVE_MEMORY_PRESENT configuration option.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
---
Hi,
The changes here are trivial so I've trimmed the spam list this time.
--
Sincerely yours,
Mike.
Documentation/vm/memory-model.rst | 7 ++-----
arch/arm/mm/init.c | 9 ++-------
arch/arm64/mm/init.c | 6 ++----
arch/ia64/mm/discontig.c | 1 -
arch/microblaze/mm/init.c | 3 ---
arch/mips/kernel/setup.c | 8 --------
arch/mips/loongson64/numa.c | 1 -
arch/mips/sgi-ip27/ip27-memory.c | 2 --
arch/parisc/mm/init.c | 5 -----
arch/powerpc/mm/mem.c | 2 --
arch/powerpc/mm/numa.c | 1 -
arch/riscv/mm/init.c | 1 -
arch/s390/mm/init.c | 1 -
arch/sh/mm/init.c | 6 ------
arch/sh/mm/numa.c | 3 ---
arch/sparc/mm/init_64.c | 1 -
arch/x86/mm/init_32.c | 2 --
arch/x86/mm/init_64.c | 1 -
include/linux/mm.h | 4 ----
include/linux/mmzone.h | 14 --------------
mm/Kconfig | 6 +-----
mm/page_alloc.c | 16 ----------------
mm/sparse.c | 20 ++++++++++++--------
23 files changed, 19 insertions(+), 101 deletions(-)
diff --git a/Documentation/vm/memory-model.rst b/Documentation/vm/memory-model.rst
index 91228044ed16..c6d77a5ae64b 100644
--- a/Documentation/vm/memory-model.rst
+++ b/Documentation/vm/memory-model.rst
@@ -141,11 +141,8 @@ sections:
`mem_section` objects and the number of rows is calculated to fit
all the memory sections.
-The architecture setup code should call :c:func:`memory_present` for
-each active memory range or use :c:func:`memblocks_present` or
-:c:func:`sparse_memory_present_with_active_regions` wrappers to
-initialize the memory sections. Next, the actual memory maps should be
-set up using :c:func:`sparse_init`.
+The architecture setup code should call sparse_init() to
+initialize the memory sections and the memory maps.
With SPARSEMEM there are two possible ways to convert a PFN to the
corresponding `struct page` - a "classic sparse" and "sparse
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 01e18e43b174..000c1b48e973 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -243,13 +243,8 @@ void __init bootmem_init(void)
(phys_addr_t)max_low_pfn << PAGE_SHIFT);
/*
- * Sparsemem tries to allocate bootmem in memory_present(),
- * so must be done after the fixed reservations
- */
- memblocks_present();
-
- /*
- * sparse_init() needs the bootmem allocator up and running.
+ * sparse_init() tries to allocate memory from memblock, so must be
+ * done after the fixed reservations
*/
sparse_init();
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index 1e93cfc7c47a..2fa9adf975db 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -430,11 +430,9 @@ void __init bootmem_init(void)
#endif
/*
- * Sparsemem tries to allocate bootmem in memory_present(), so must be
- * done after the fixed reservations.
+ * sparse_init() tries to allocate memory from memblock, so must be
+ * done after the fixed reservations
*/
- memblocks_present();
-
sparse_init();
zone_sizes_init(min, max);
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index dd8284bcbf16..680855a042fb 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -601,7 +601,6 @@ void __init paging_init(void)
max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
- sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
#ifdef CONFIG_VIRTUAL_MEM_MAP
diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c
index 521b59ba716c..0880a003573d 100644
--- a/arch/microblaze/mm/init.c
+++ b/arch/microblaze/mm/init.c
@@ -172,9 +172,6 @@ void __init setup_memory(void)
&memblock.memory, 0);
}
- /* XXX need to clip this if using highmem? */
- sparse_memory_present_with_active_regions(0);
-
paging_init();
}
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 7b537fa2035d..29fb0456c342 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -371,14 +371,6 @@ static void __init bootmem_init(void)
#endif
}
-
- /*
- * In any case the added to the memblock memory regions
- * (highmem/lowmem, available/reserved, etc) are considered
- * as present, so inform sparsemem about them.
- */
- memblocks_present();
-
/*
* Reserve initrd memory if needed.
*/
diff --git a/arch/mips/loongson64/numa.c b/arch/mips/loongson64/numa.c
index 901f5be5ee76..ea8bb1bc667e 100644
--- a/arch/mips/loongson64/numa.c
+++ b/arch/mips/loongson64/numa.c
@@ -220,7 +220,6 @@ static __init void prom_meminit(void)
cpumask_clear(&__node_cpumask[node]);
}
}
- memblocks_present();
max_low_pfn = PHYS_PFN(memblock_end_of_DRAM());
for (cpu = 0; cpu < loongson_sysconf.nr_cpus; cpu++) {
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index 1213215ea965..d411e0a90a5b 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -402,8 +402,6 @@ void __init prom_meminit(void)
}
__node_data[node] = &null_node;
}
-
- memblocks_present();
}
void __init prom_free_prom_memory(void)
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 48d628a1a0af..01d27f265701 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -689,11 +689,6 @@ void __init paging_init(void)
flush_cache_all_local(); /* start with known state */
flush_tlb_all_local(NULL);
- /*
- * Mark all memblocks as present for sparsemem using
- * memory_present() and then initialize sparsemem.
- */
- memblocks_present();
sparse_init();
parisc_bootmem_free();
}
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index c2c11eb8dcfc..ad28c353146d 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -184,8 +184,6 @@ void __init mem_topology_setup(void)
void __init initmem_init(void)
{
- /* XXX need to clip this if using highmem? */
- sparse_memory_present_with_active_regions(0);
sparse_init();
}
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 9fcf2d195830..03a81d65095b 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -949,7 +949,6 @@ void __init initmem_init(void)
get_pfn_range_for_nid(nid, &start_pfn, &end_pfn);
setup_node_data(nid, start_pfn, end_pfn);
- sparse_memory_present_with_active_regions(nid);
}
sparse_init();
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index f4adb3684f3d..1486b9af9398 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -520,7 +520,6 @@ void mark_rodata_ro(void)
void __init paging_init(void)
{
setup_vm_final();
- memblocks_present();
sparse_init();
setup_zero_page();
zone_sizes_init();
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 6dc7c3b60ef6..0d282081dc1f 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -115,7 +115,6 @@ void __init paging_init(void)
__load_psw_mask(psw.mask);
kasan_free_early_identity();
- sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
zone_dma_bits = 31;
memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index a70ba0fdd0b3..62b8f03ffc80 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -240,12 +240,6 @@ static void __init do_init_bootmem(void)
plat_mem_setup();
- for_each_memblock(memory, reg) {
- int nid = memblock_get_region_node(reg);
-
- memory_present(nid, memblock_region_memory_base_pfn(reg),
- memblock_region_memory_end_pfn(reg));
- }
sparse_init();
}
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index f7e4439deb17..50f0dc1744d0 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -53,7 +53,4 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
/* It's up */
node_set_online(nid);
-
- /* Kick sparsemem */
- sparse_memory_present_with_active_regions(nid);
}
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 02e6e5e0f106..fad6d3129904 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -1610,7 +1610,6 @@ static unsigned long __init bootmem_init(unsigned long phys_base)
/* XXX cpu notifier XXX */
- sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
return end_pfn;
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 8b4afad84f4a..4cb958419fb0 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -678,7 +678,6 @@ void __init initmem_init(void)
#endif
memblock_set_node(0, PHYS_ADDR_MAX, &memblock.memory, 0);
- sparse_memory_present_with_active_regions(0);
#ifdef CONFIG_FLATMEM
max_mapnr = IS_ENABLED(CONFIG_HIGHMEM) ? highend_pfn : max_low_pfn;
@@ -718,7 +717,6 @@ void __init paging_init(void)
* NOTE: at this point the bootmem allocator is fully available.
*/
olpc_dt_build_devicetree();
- sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
zone_sizes_init();
}
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index dbae185511cd..d580110a12bb 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -817,7 +817,6 @@ void __init initmem_init(void)
void __init paging_init(void)
{
- sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
/*
diff --git a/include/linux/mm.h b/include/linux/mm.h
index dc7b87310c10..5f904e8fa825 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -2415,9 +2415,6 @@ static inline unsigned long get_num_physpages(void)
* for_each_valid_physical_page_range()
* memblock_add_node(base, size, nid)
* free_area_init(max_zone_pfns);
- *
- * sparse_memory_present_with_active_regions() calls memory_present() for
- * each range when SPARSEMEM is enabled.
*/
void free_area_init(unsigned long *max_zone_pfn);
unsigned long node_map_pfn_alignment(void);
@@ -2428,7 +2425,6 @@ extern unsigned long absent_pages_in_range(unsigned long start_pfn,
extern void get_pfn_range_for_nid(unsigned int nid,
unsigned long *start_pfn, unsigned long *end_pfn);
extern unsigned long find_min_pfn_with_active_regions(void);
-extern void sparse_memory_present_with_active_regions(int nid);
#ifndef CONFIG_NEED_MULTIPLE_NODES
static inline int early_pfn_to_nid(unsigned long pfn)
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index f6f884970511..e55dd1462033 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -819,18 +819,6 @@ static inline struct pglist_data *lruvec_pgdat(struct lruvec *lruvec)
extern unsigned long lruvec_lru_size(struct lruvec *lruvec, enum lru_list lru, int zone_idx);
-#ifdef CONFIG_HAVE_MEMORY_PRESENT
-void memory_present(int nid, unsigned long start, unsigned long end);
-#else
-static inline void memory_present(int nid, unsigned long start, unsigned long end) {}
-#endif
-
-#if defined(CONFIG_SPARSEMEM)
-void memblocks_present(void);
-#else
-static inline void memblocks_present(void) {}
-#endif
-
#ifdef CONFIG_HAVE_MEMORYLESS_NODES
int local_memory_node(int node_id);
#else
@@ -1387,8 +1375,6 @@ struct mminit_pfnnid_cache {
#define early_pfn_valid(pfn) (1)
#endif
-void memory_present(int nid, unsigned long start, unsigned long end);
-
/*
* If it is possible to have holes within a MAX_ORDER_NR_PAGES, then we
* need to check pfn validity within that MAX_ORDER_NR_PAGES block.
diff --git a/mm/Kconfig b/mm/Kconfig
index f2104cc0d35c..90766edfdfc7 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -88,13 +88,9 @@ config NEED_MULTIPLE_NODES
def_bool y
depends on DISCONTIGMEM || NUMA
-config HAVE_MEMORY_PRESENT
- def_bool y
- depends on ARCH_HAVE_MEMORY_PRESENT || SPARSEMEM
-
#
# SPARSEMEM_EXTREME (which is the default) does some bootmem
-# allocations when memory_present() is called. If this cannot
+# allocations when sparse_init() is called. If this cannot
# be done on your architecture, select this option. However,
# statically allocating the mem_section[] array can potentially
# consume vast quantities of .bss, so be careful.
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index e028b87ce294..3a40d089391b 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -6324,22 +6324,6 @@ void __meminit init_currently_empty_zone(struct zone *zone,
zone->initialized = 1;
}
-/**
- * sparse_memory_present_with_active_regions - Call memory_present for each active range
- * @nid: The node to call memory_present for. If MAX_NUMNODES, all nodes will be used.
- *
- * If an architecture guarantees that all ranges registered contain no holes and may
- * be freed, this function may be used instead of calling memory_present() manually.
- */
-void __init sparse_memory_present_with_active_regions(int nid)
-{
- unsigned long start_pfn, end_pfn;
- int i, this_nid;
-
- for_each_mem_pfn_range(i, nid, &start_pfn, &end_pfn, &this_nid)
- memory_present(this_nid, start_pfn, end_pfn);
-}
-
/**
* get_pfn_range_for_nid - Return the start and end page frames for a node
* @nid: The nid to return the range for. If MAX_NUMNODES, the min and max PFN are returned.
diff --git a/mm/sparse.c b/mm/sparse.c
index b2b9a3e34696..93100912a18e 100644
--- a/mm/sparse.c
+++ b/mm/sparse.c
@@ -250,7 +250,7 @@ void __init subsection_map_init(unsigned long pfn, unsigned long nr_pages)
#endif
/* Record a memory area against a node. */
-void __init memory_present(int nid, unsigned long start, unsigned long end)
+static void __init memory_present(int nid, unsigned long start, unsigned long end)
{
unsigned long pfn;
@@ -286,11 +286,11 @@ void __init memory_present(int nid, unsigned long start, unsigned long end)
}
/*
- * Mark all memblocks as present using memory_present(). This is a
- * convenience function that is useful for a number of arches
- * to mark all of the systems memory as present during initialization.
+ * Mark all memblocks as present using memory_present().
+ * This is a convenience function that is useful to mark all of the systems
+ * memory as present during initialization.
*/
-void __init memblocks_present(void)
+static void __init memblocks_present(void)
{
struct memblock_region *reg;
@@ -575,9 +575,13 @@ static void __init sparse_init_nid(int nid, unsigned long pnum_begin,
*/
void __init sparse_init(void)
{
- unsigned long pnum_begin = first_present_section_nr();
- int nid_begin = sparse_early_nid(__nr_to_section(pnum_begin));
- unsigned long pnum_end, map_count = 1;
+ unsigned long pnum_end, pnum_begin, map_count = 1;
+ int nid_begin;
+
+ memblocks_present();
+
+ pnum_begin = first_present_section_nr();
+ nid_begin = sparse_early_nid(__nr_to_section(pnum_begin));
/* Setup pageblock_order for HUGETLB_PAGE_SIZE_VARIABLE */
set_pageblock_order();
--
2.26.2
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2020-07-12 8:31 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-12 8:31 [PATCH] mm/sparse: cleanup the code surrounding memory_present() Mike Rapoport
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).