linux-arch.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Michael Ellerman <mpe@ellerman.id.au>
To: Nicholas Piggin <npiggin@gmail.com>, linux-mm@kvack.org
Cc: Nicholas Piggin <npiggin@gmail.com>,
	linux-arch@vger.kernel.org, linux-kernel@vger.kernel.org,
	linuxppc-dev@lists.ozlabs.org,
	"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Jens Axboe <axboe@kernel.dk>,
	Peter Zijlstra <peterz@infradead.org>,
	"David S. Miller" <davem@davemloft.net>
Subject: Re: [PATCH 4/4] powerpc/64s/radix: Fix mm_cpumask trimming race vs kthread_use_mm
Date: Tue, 01 Sep 2020 22:00:20 +1000	[thread overview]
Message-ID: <87pn751zcb.fsf@mpe.ellerman.id.au> (raw)
In-Reply-To: <20200828100022.1099682-5-npiggin@gmail.com>

Nicholas Piggin <npiggin@gmail.com> writes:
> Commit 0cef77c7798a7 ("powerpc/64s/radix: flush remote CPUs out of
> single-threaded mm_cpumask") added a mechanism to trim the mm_cpumask of
> a process under certain conditions. One of the assumptions is that
> mm_users would not be incremented via a reference outside the process
> context with mmget_not_zero() then go on to kthread_use_mm() via that
> reference.
>
> That invariant was broken by io_uring code (see previous sparc64 fix),
> but I'll point Fixes: to the original powerpc commit because we are
> changing that assumption going forward, so this will make backports
> match up.
>
> Fix this by no longer relying on that assumption, but by having each CPU
> check the mm is not being used, and clearing their own bit from the mask
> if it's okay. This fix relies on commit 38cf307c1f20 ("mm: fix
> kthread_use_mm() vs TLB invalidate") to disable irqs over the mm switch,
> and ARCH_WANT_IRQS_OFF_ACTIVATE_MM to be enabled.

You could use:

Depends-on: 38cf307c1f20 ("mm: fix kthread_use_mm() vs TLB invalidate")

> Fixes: 0cef77c7798a7 ("powerpc/64s/radix: flush remote CPUs out of single-threaded mm_cpumask")
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> ---
>  arch/powerpc/include/asm/tlb.h       | 13 -------------
>  arch/powerpc/mm/book3s64/radix_tlb.c | 23 ++++++++++++++++-------
>  2 files changed, 16 insertions(+), 20 deletions(-)

One minor nit below if you're respinning anyway.

You know this stuff better than me, but I still reviewed it and it seems
good to me.

Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>

> diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h
> index fbc6f3002f23..d97f061fecac 100644
> --- a/arch/powerpc/include/asm/tlb.h
> +++ b/arch/powerpc/include/asm/tlb.h
> @@ -66,19 +66,6 @@ static inline int mm_is_thread_local(struct mm_struct *mm)
>  		return false;
>  	return cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm));
>  }
> -static inline void mm_reset_thread_local(struct mm_struct *mm)
> -{
> -	WARN_ON(atomic_read(&mm->context.copros) > 0);
> -	/*
> -	 * It's possible for mm_access to take a reference on mm_users to
> -	 * access the remote mm from another thread, but it's not allowed
> -	 * to set mm_cpumask, so mm_users may be > 1 here.
> -	 */
> -	WARN_ON(current->mm != mm);
> -	atomic_set(&mm->context.active_cpus, 1);
> -	cpumask_clear(mm_cpumask(mm));
> -	cpumask_set_cpu(smp_processor_id(), mm_cpumask(mm));
> -}
>  #else /* CONFIG_PPC_BOOK3S_64 */
>  static inline int mm_is_thread_local(struct mm_struct *mm)
>  {
> diff --git a/arch/powerpc/mm/book3s64/radix_tlb.c b/arch/powerpc/mm/book3s64/radix_tlb.c
> index 0d233763441f..a421a0e3f930 100644
> --- a/arch/powerpc/mm/book3s64/radix_tlb.c
> +++ b/arch/powerpc/mm/book3s64/radix_tlb.c
> @@ -645,19 +645,29 @@ static void do_exit_flush_lazy_tlb(void *arg)
>  	struct mm_struct *mm = arg;
>  	unsigned long pid = mm->context.id;
>  
> +	/*
> +	 * A kthread could have done a mmget_not_zero() after the flushing CPU
> +	 * checked mm_users == 1, and be in the process of kthread_use_mm when
                                ^
                                in mm_is_singlethreaded()

Adding that reference would help join the dots for a new reader I think.

cheers

> +	 * interrupted here. In that case, current->mm will be set to mm,
> +	 * because kthread_use_mm() setting ->mm and switching to the mm is
> +	 * done with interrupts off.
> +	 */
>  	if (current->mm == mm)
> -		return; /* Local CPU */
> +		goto out_flush;
>  
>  	if (current->active_mm == mm) {
> -		/*
> -		 * Must be a kernel thread because sender is single-threaded.
> -		 */
> -		BUG_ON(current->mm);
> +		WARN_ON_ONCE(current->mm != NULL);
> +		/* Is a kernel thread and is using mm as the lazy tlb */
>  		mmgrab(&init_mm);
> -		switch_mm(mm, &init_mm, current);
>  		current->active_mm = &init_mm;
> +		switch_mm_irqs_off(mm, &init_mm, current);
>  		mmdrop(mm);
>  	}
> +
> +	atomic_dec(&mm->context.active_cpus);
> +	cpumask_clear_cpu(smp_processor_id(), mm_cpumask(mm));
> +
> +out_flush:
>  	_tlbiel_pid(pid, RIC_FLUSH_ALL);
>  }
>  
> @@ -672,7 +682,6 @@ static void exit_flush_lazy_tlbs(struct mm_struct *mm)
>  	 */
>  	smp_call_function_many(mm_cpumask(mm), do_exit_flush_lazy_tlb,
>  				(void *)mm, 1);
> -	mm_reset_thread_local(mm);
>  }
>  
>  void radix__flush_tlb_mm(struct mm_struct *mm)

  reply	other threads:[~2020-09-01 12:05 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-28 10:00 [PATCH 0/4] more mm switching vs TLB shootdown and lazy tlb Nicholas Piggin
2020-08-28 10:00 ` [PATCH 1/4] mm: fix exec activate_mm vs TLB shootdown and lazy tlb switching race Nicholas Piggin
2020-08-28 11:15   ` peterz
2020-08-31  1:25     ` Nicholas Piggin
2020-08-28 10:00 ` [PATCH 2/4] powerpc: select ARCH_WANT_IRQS_OFF_ACTIVATE_MM Nicholas Piggin
2020-08-28 10:00 ` [PATCH 3/4] sparc64: remove mm_cpumask clearing to fix kthread_use_mm race Nicholas Piggin
2020-08-28 10:00 ` [PATCH 4/4] powerpc/64s/radix: Fix mm_cpumask trimming race vs kthread_use_mm Nicholas Piggin
2020-09-01 12:00   ` Michael Ellerman [this message]
2020-09-02  9:48     ` Nicholas Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87pn751zcb.fsf@mpe.ellerman.id.au \
    --to=mpe@ellerman.id.au \
    --cc=akpm@linux-foundation.org \
    --cc=aneesh.kumar@linux.ibm.com \
    --cc=axboe@kernel.dk \
    --cc=davem@davemloft.net \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=npiggin@gmail.com \
    --cc=peterz@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).