Re: [PATCH 4/4] arm64: dts: rockchip: add USB support to RK3308 dts

[Johan Jonker <jbx6244@gmail.com>]

Hi Tobias,

Just sent a patch for grf.yaml and rockchip-usb-phy.yaml conversion myself.

Added { .compatible = "rockchip,rk3308-usb2phy", .data =
&rk3308_phy_cfgs }, to phy-rockchip-inno-usb2.c

Added is "rockchip,rk3308-usb-phy" to rockchip-usb-phy.txt

compatible = "rockchip,rk3308-usb2phy"; is used in this patch.

Maybe try phy-rockchip-inno-usb2.yaml?

"rockchip,rk3308-usb2phy-grf", "syscon", "simple-mfd" document missing.

Could someone recheck the reg memory size?
Is this still correct then?

===
compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd";
reg = <0x0 0xff000000 0x0 0x10000>;

Do we still need "0x0 0x10000" here?
===
compatible = "rockchip,rk3308-usb2phy-grf", "syscon", "simple-mfd";
reg = <0x0 0xff008000 0x0 0x4000>;
===
compatible = "rockchip,rk3308-detect-grf", "syscon", "simple-mfd";
reg = <0x0 0xff00b000 0x0 0x1000>;
===
compatible = "rockchip,rk3308-core-grf", "syscon", "simple-mfd";
reg = <0x0 0xff00c000 0x0 0x1000>;
===

Johan

On 5/14/21 12:27 PM, Tobias Schramm wrote:
> The Rockchip RK3308 features an integrated USB 2.0 phy, an USB OTG
> controller and OHCI/EHCI interfaces.
> This patch adds all of those to the RK3308 dtsi and thereby enables USB
> support on the RK3308.
> 
> Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
> ---
>  arch/arm64/boot/dts/rockchip/rk3308.dtsi | 75 ++++++++++++++++++++++++
>  1 file changed, 75 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
> index 0c5fa9801e6f..80fd802d6c15 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
> @@ -177,6 +177,43 @@ reboot-mode {
>  		};
>  	};
>  
> +	usb2phy_grf: syscon@ff008000 {
> +		compatible = "rockchip,rk3308-usb2phy-grf", "syscon",
> +			     "simple-mfd";
> +		reg = <0x0 0xff008000 0x0 0x4000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +
> +		u2phy: usb2-phy@100 {

> +			compatible = "rockchip,rk3308-usb2phy";
> +			reg = <0x100 0x10>;
> +			clocks = <&cru SCLK_USBPHY_REF>;
> +			clock-names = "phyclk";
> +			clock-output-names = "usb480m_phy";
> +			#clock-cells = <0>;
> +			assigned-clocks = <&cru USB480M>;
> +			assigned-clock-parents = <&u2phy>;
> +			status = "disabled";
> +

Looks like

> +			u2phy_otg: otg-port {
> +				#phy-cells = <0>;
> +				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupt-names = "otg-bvalid", "otg-id",
> +						  "linestate";
> +				status = "disabled";
> +			};
> +
> +			u2phy_host: host-port {
> +				#phy-cells = <0>;
> +				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupt-names = "linestate";
> +				status = "disabled";
> +			};
> +		};
> +	};
> +
>  	detect_grf: syscon@ff00b000 {
>  		compatible = "rockchip,rk3308-detect-grf", "syscon", "simple-mfd";
>  		reg = <0x0 0xff00b000 0x0 0x1000>;
> @@ -579,6 +616,44 @@ spdif_tx: spdif-tx@ff3a0000 {
>  		status = "disabled";
>  	};
>  
> +	usb20_otg: usb@ff400000 {
> +		compatible = "rockchip,rk3308-usb", "rockchip,rk3066-usb",
> +			     "snps,dwc2";
> +		reg = <0x0 0xff400000 0x0 0x40000>;
> +		interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru HCLK_OTG>;
> +		clock-names = "otg";
> +		dr_mode = "otg";
> +		g-np-tx-fifo-size = <16>;
> +		g-rx-fifo-size = <280>;
> +		g-tx-fifo-size = <256 128 128 64 32 16>;
> +		phys = <&u2phy_otg>;
> +		phy-names = "usb2-phy";
> +		status = "disabled";
> +	};
> +
> +	usb_host_ehci: usb@ff440000 {
> +		compatible = "generic-ehci";
> +		reg = <0x0 0xff440000 0x0 0x10000>;
> +		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru HCLK_HOST>, <&cru HCLK_HOST_ARB>, <&u2phy>;
> +		clock-names = "usbhost", "arbiter", "utmi";
> +		phys = <&u2phy_host>;
> +		phy-names = "usb";
> +		status = "disabled";
> +	};
> +
> +	usb_host_ohci: usb@ff450000 {
> +		compatible = "generic-ohci";
> +		reg = <0x0 0xff450000 0x0 0x10000>;
> +		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru HCLK_HOST>, <&cru HCLK_HOST_ARB>, <&u2phy>;
> +		clock-names = "usbhost", "arbiter", "utmi";
> +		phys = <&u2phy_host>;
> +		phy-names = "usb";
> +		status = "disabled";
> +	};
> +
>  	sdmmc: mmc@ff480000 {
>  		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
>  		reg = <0x0 0xff480000 0x0 0x4000>;
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel