linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Mark Rutland <mark.rutland@arm.com>,
	Rob Herring <robh+dt@kernel.org>,
	Frank Rowand <frowand.list@gmail.com>,
	"David S . Miller" <davem@davemloft.net>,
	Chen-Yu Tsai <wens@csie.org>,
	Maxime Ripard <maxime.ripard@bootlin.com>
Cc: devicetree@vger.kernel.org,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Alexandre Torgue" <alexandre.torgue@st.com>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Antoine Ténart" <antoine.tenart@bootlin.com>,
	netdev@vger.kernel.org,
	"Maxime Chevallier" <maxime.chevallier@bootlin.com>,
	"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	"Heiner Kallweit" <hkallweit1@gmail.com>
Subject: [PATCH v3 16/16] arm64: dts: allwinner: Switch from phy-mode to phy-connection-type
Date: Wed, 19 Jun 2019 11:47:25 +0200	[thread overview]
Message-ID: <0afe15465ec548e5ae2304c822267710a678f6c4.1560937626.git-series.maxime.ripard@bootlin.com> (raw)
In-Reply-To: <27aeb33cf5b896900d5d11bd6957eda268014f0c.1560937626.git-series.maxime.ripard@bootlin.com>

The phy-mode device tree property has been deprecated in favor of
phy-connection-type, let's replace it.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

---

Changes from v2:
  - new patch
---
 arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts        | 2 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts          | 2 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts | 2 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts           | 2 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts        | 2 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts         | 2 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts              | 2 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts    | 2 +-
 arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts          | 2 +-
 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts             | 2 +-
 10 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
index 208373efee49..2484142f855c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -127,7 +127,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-connection-type = "rgmii";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_dc1sw>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index 9b9d9157128c..b8d93c6e9469 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -102,7 +102,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-connection-type = "rgmii";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_dcdc1>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
index 787ebd805a3b..ba7ba6d1d840 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
@@ -30,7 +30,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-connection-type = "rgmii";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_dc1sw>;
 	allwinner,tx-delay-ps = <600>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 01a9a52edae4..e3f691b358da 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -102,7 +102,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-connection-type = "rgmii";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_dcdc1>;
 	allwinner,tx-delay-ps = <600>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index 5ef3c62c765e..738497489afd 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -129,7 +129,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-connection-type = "rgmii";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_gmac_3v3>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
index 24f1aac366d6..234d0e66cbdc 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts
@@ -52,7 +52,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-connection-type = "rgmii";
 	phy-handle = <&ext_rgmii_phy>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
index 409523cb0950..7458469a60f7 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
@@ -103,7 +103,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rmii_pins>;
-	phy-mode = "rmii";
+	phy-connection-type = "rmii";
 	phy-handle = <&ext_rmii_phy1>;
 	phy-supply = <&reg_dc1sw>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
index e6fb9683f213..14ba7f4119a3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
@@ -115,7 +115,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-connection-type = "rgmii";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_dc1sw>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
index 0dc33c90dd60..80916c0e08f2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts
@@ -64,7 +64,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ext_rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-connection-type = "rgmii";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_aldo2>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 9e464d40cbff..8292d944ff7b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -66,7 +66,7 @@
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ext_rgmii_pins>;
-	phy-mode = "rgmii";
+	phy-connection-type = "rgmii";
 	phy-handle = <&ext_rgmii_phy>;
 	phy-supply = <&reg_aldo2>;
 	allwinner,rx-delay-ps = <200>;
-- 
git-series 0.9.1

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-06-19  9:52 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-19  9:47 [PATCH v3 01/16] dt-bindings: net: Add YAML schemas for the generic Ethernet options Maxime Ripard
2019-06-19  9:47 ` [PATCH v3 02/16] dt-bindings: net: Add a YAML schemas for the generic PHY options Maxime Ripard
2019-06-19  9:47 ` [PATCH v3 03/16] dt-bindings: net: Add a YAML schemas for the generic MDIO options Maxime Ripard
2019-06-19 14:17   ` Rob Herring
2019-06-20  9:56     ` Maxime Ripard
2019-06-19  9:47 ` [PATCH v3 04/16] MAINTAINERS: Add Ethernet PHY YAML file Maxime Ripard
2019-06-19  9:47 ` [PATCH v3 05/16] dt-bindings: net: phy: The interrupt property is not mandatory Maxime Ripard
2019-06-19  9:47 ` [PATCH v3 06/16] dt-bindings: net: sun4i-emac: Convert the binding to a schemas Maxime Ripard
2019-06-19 14:46   ` Rob Herring
2019-06-19 20:44     ` Rob Herring
2019-06-19  9:47 ` [PATCH v3 07/16] dt-bindings: net: sun4i-mdio: " Maxime Ripard
2019-06-19 14:19   ` Rob Herring
2019-06-19  9:47 ` [PATCH v3 08/16] dt-bindings: net: stmmac: " Maxime Ripard
2019-06-19 14:12   ` Rob Herring
2019-06-19  9:47 ` [PATCH v3 09/16] dt-bindings: net: sun7i-gmac: " Maxime Ripard
2019-06-19  9:47 ` [PATCH v3 10/16] dt-bindings: net: sun8i-emac: " Maxime Ripard
2019-06-19 14:10   ` Rob Herring
2019-06-19  9:47 ` [PATCH v3 11/16] dt-bindings: net: dwmac: Deprecate the PHY reset properties Maxime Ripard
2019-06-19 14:47   ` Rob Herring
2019-06-19  9:47 ` [PATCH v3 12/16] ARM: dts: sunxi: Switch to the generic PHY properties Maxime Ripard
2019-06-19  9:47 ` [PATCH v3 13/16] ARM: dts: sunxi: Switch from phy to phy-handle Maxime Ripard
2019-06-19  9:47 ` [PATCH v3 14/16] ARM: dts: sunxi: Switch from phy-mode to phy-connection-type Maxime Ripard
2019-06-19 14:11   ` Andrew Lunn
2019-06-19  9:47 ` [PATCH v3 15/16] ARM: dts: sunxi: h3/h5: " Maxime Ripard
2019-06-19  9:47 ` Maxime Ripard [this message]
2019-06-19 14:03 ` [PATCH v3 01/16] dt-bindings: net: Add YAML schemas for the generic Ethernet options Andrew Lunn
2019-06-20  9:08   ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0afe15465ec548e5ae2304c822267710a678f6c4.1560937626.git-series.maxime.ripard@bootlin.com \
    --to=maxime.ripard@bootlin.com \
    --cc=alexandre.torgue@st.com \
    --cc=andrew@lunn.ch \
    --cc=antoine.tenart@bootlin.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=frowand.list@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.chevallier@bootlin.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).