linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mkl@pengutronix.de (Marc Kleine-Budde)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] at91sam9263: add at91_can device to generic device definition
Date: Thu, 17 Sep 2009 11:37:32 +0200	[thread overview]
Message-ID: <1253180254-11910-2-git-send-email-mkl@pengutronix.de> (raw)
In-Reply-To: <1253180254-11910-1-git-send-email-mkl@pengutronix.de>

This patch adds the device definition for the at91_can device to
the generic device definiton file for the at91sam9263.

Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 arch/arm/mach-at91/at91sam9263_devices.c |   36 ++++++++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/board.h  |    6 +++++
 2 files changed, 42 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index b7f2332..6026c2e 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -757,6 +757,42 @@ void __init at91_add_device_ac97(struct atmel_ac97_data *data)
 void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  CAN Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CAN_AT91) || defined(CONFIG_CAN_AT91_MODULE)
+static struct resource can_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_CAN,
+		.end	= AT91SAM9263_BASE_CAN + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_CAN,
+		.end	= AT91SAM9263_ID_CAN,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_can_device = {
+	.name		= "at91_can",
+	.id		= -1,
+	.resource	= can_resources,
+	.num_resources	= ARRAY_SIZE(can_resources),
+};
+
+void __init at91_add_device_can(struct at91_can_data *data)
+{
+	at91_set_A_periph(AT91_PIN_PA13, 0);	/* CANTX */
+	at91_set_A_periph(AT91_PIN_PA14, 0);	/* CANRX */
+	at91sam9263_can_device.dev.platform_data = data;
+
+	platform_device_register(&at91sam9263_can_device);
+}
+#else
+void __init at91_add_device_can(struct at91_can_data *data) {}
+#endif
 
 /* --------------------------------------------------------------------
  *  LCD Controller
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index e6afff8..134731c 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -179,6 +179,12 @@ extern void __init at91_add_device_isi(void);
  /* Touchscreen Controller */
 extern void __init at91_add_device_tsadcc(void);
 
+/* CAN */
+struct at91_can_data {
+	void (*transceiver_switch)(int on);
+};
+extern void __init at91_add_device_can(struct at91_can_data *data);
+
  /* LEDs */
 extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
 extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
-- 
1.6.4.3

  reply	other threads:[~2009-09-17  9:37 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-09-17  9:37 No subject Marc Kleine-Budde
2009-09-17  9:37 ` Marc Kleine-Budde [this message]
2009-09-17  9:37   ` [PATCH 2/3] at91sam9263ek: activate at91 CAN controller Marc Kleine-Budde
2009-09-17  9:37     ` [PATCH 3/3] at91_can: add driver for Atmel's CAN controller on AT91SAM9263 Marc Kleine-Budde
2009-09-17  9:48       ` Wolfgang Grandegger
2009-09-22 22:09         ` David Miller
2009-09-21 21:44       ` Andrew Victor
2009-09-17 13:14     ` [PATCH 2/3] at91sam9263ek: activate at91 CAN controller Wolfgang Grandegger
2009-09-22 22:09       ` David Miller
2009-09-21 21:27     ` Andrew Victor
2009-09-17 13:14   ` [PATCH 1/3] at91sam9263: add at91_can device to generic device definition Wolfgang Grandegger
2009-09-22 22:08     ` David Miller
2009-09-17  9:50 ` Wolfgang Grandegger
2009-09-17 10:04   ` [PATCH V2 0/3] at91_can: add support for Atmel's CAN controller on AT91SAM9263 Marc Kleine-Budde
2009-09-17 11:33     ` Marc Kleine-Budde
2009-09-21 21:31     ` Andrew Victor
2009-09-21 21:40       ` Russell King - ARM Linux
2009-09-22 22:07       ` Marc Kleine-Budde
  -- strict thread matches above, loose matches on Subject: below --
2009-09-16  9:46 [PATCH " Marc Kleine-Budde
2009-09-16  9:46 ` [PATCH 1/3] at91sam9263: add at91_can device to generic device definition Marc Kleine-Budde
2009-09-21 21:23   ` Andrew Victor
2009-09-21 21:30     ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1253180254-11910-2-git-send-email-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).