From: davidb@codeaurora.org (David Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: msm: Remove .boot_params from MSM boardfiles
Date: Thu, 28 Jul 2011 13:18:10 -0700 [thread overview]
Message-ID: <1311884291-5409-1-git-send-email-davidb@codeaurora.org> (raw)
In-Reply-To: <1311794355-26988-2-git-send-email-sboyd@codeaurora.org>
The bootloaders on MSM always pass the ATAGs address to the kernel in
r2. It isn't necessary to set .boot_params in the machine
descriptors, and this unnecessarily hinders having a common kernel for
multiple targets, so remove them.
Signed-off-by: David Brown <davidb@codeaurora.org>
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index c03f269..f7acdc5 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -130,7 +130,6 @@ static void __init msm7x2x_map_io(void)
}
MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
@@ -138,7 +137,6 @@ MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
MACHINE_END
MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
@@ -146,7 +144,6 @@ MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
MACHINE_END
MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
@@ -154,7 +151,6 @@ MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
MACHINE_END
MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index d1e4cc8..4d5065f 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -122,7 +122,6 @@ static void __init msm7x30_map_io(void)
}
MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
@@ -132,7 +131,6 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
MACHINE_END
MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
@@ -142,7 +140,6 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
MACHINE_END
MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
.fixup = msm7x30_fixup,
.reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 6a96911..94cca95 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -193,7 +193,6 @@ static void __init qsd8x50_init(void)
}
MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
@@ -201,7 +200,6 @@ MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
MACHINE_END
MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 68f930f..950a27e 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -105,7 +105,6 @@ static void __init sapphire_map_io(void)
MACHINE_START(SAPPHIRE, "sapphire")
/* Maintainer: Brian Swetland <swetland@google.com> */
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
.fixup = sapphire_fixup,
.map_io = sapphire_map_io,
.init_irq = sapphire_init_irq,
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2011-07-28 20:18 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-27 19:19 [PATCHv4 1/2] ARM: Set proper TEXT_OFFSET for newer MSMs Stephen Boyd
2011-07-27 19:19 ` [PATCHv4 2/2] ARM: P2V: Remove ARM_PATCH_PHYS_VIRT_16BIT Stephen Boyd
2011-07-28 20:18 ` David Brown [this message]
2011-07-28 20:18 ` [PATCH 2/2] ARM: msm: Remove PLAT_PHYS_OFFSETS from MSM targets David Brown
2011-07-28 20:49 ` Nicolas Pitre
2011-07-28 21:00 ` David Brown
2011-07-29 10:32 ` Russell King - ARM Linux
2011-07-29 12:42 ` Nicolas Pitre
2011-07-29 14:01 ` David Brown
2011-08-11 9:32 ` [PATCHv4 2/2] ARM: P2V: Remove ARM_PATCH_PHYS_VIRT_16BIT Russell King - ARM Linux
2011-08-11 21:11 ` [PATCHv4 1/2] ARM: Set proper TEXT_OFFSET for newer MSMs David Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1311884291-5409-1-git-send-email-davidb@codeaurora.org \
--to=davidb@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).