From: wenyou.yang@atmel.com (Wenyou Yang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 12/14] ARM: dts: add spi nodes for atmel SoC
Date: Tue, 19 Mar 2013 15:50:57 +0800 [thread overview]
Message-ID: <1363679457-4204-1-git-send-email-wenyou.yang@atmel.com> (raw)
In-Reply-To: <1363678866-3567-1-git-send-email-wenyou.yang@atmel.com>
From: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
[wenyou.yang at atmel.com: add spi nodes for sam9260, sam9263, sam9g45 and sam9n12]
[wenyou.yang at atmel.com: remove spi property "cs-gpios" to the board dts files]
[wenyou.yang at atmel.com: submit the patch]
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Cc: linux at arm.linux.org.uk
Cc: linux-kernel at vger.kernel.org
---
arch/arm/boot/dts/at91sam9260.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/at91sam9263.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/at91sam9g45.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/at91sam9n12.dtsi | 18 ++++++++++++++++++
arch/arm/boot/dts/at91sam9x5.dtsi | 18 ++++++++++++++++++
5 files changed, 90 insertions(+)
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index cb7bcc5..6e31dc8 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -471,6 +471,24 @@
status = "disabled";
};
+ spi0: spi at fffc8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffc8000 0x200>;
+ interrupts = <12 4 3>;
+ status = "disabled";
+ };
+
+ spi1: spi at fffcc000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffcc000 0x200>;
+ interrupts = <13 4 3>;
+ status = "disabled";
+ };
+
adc0: adc at fffe0000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xfffe0000 0x100>;
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 271d4de..6c6d9ae 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -462,6 +462,24 @@
reg = <0xfffffd40 0x10>;
status = "disabled";
};
+
+ spi0: spi at fffa4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffa4000 0x200>;
+ interrupts = <14 4 3>;
+ status = "disabled";
+ };
+
+ spi1: spi at fffa8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffa8000 0x200>;
+ interrupts = <15 4 3>;
+ status = "disabled";
+ };
};
nand0: nand at 40000000 {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 6b1d4ca..e085b8a 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -531,6 +531,24 @@
reg = <0xfffffd40 0x10>;
status = "disabled";
};
+
+ spi0: spi at fffa4000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffa4000 0x200>;
+ interrupts = <14 4 3>;
+ status = "disabled";
+ };
+
+ spi1: spi at fffa8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xfffa8000 0x200>;
+ interrupts = <15 4 3>;
+ status = "disabled";
+ };
};
nand0: nand at 40000000 {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 7750f98..f3f87ef3 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -373,6 +373,24 @@
#size-cells = <0>;
status = "disabled";
};
+
+ spi0: spi at f0000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xf0000000 0x100>;
+ interrupts = <13 4 3>;
+ status = "disabled";
+ };
+
+ spi1: spi at f0004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xf0004000 0x100>;
+ interrupts = <14 4 3>;
+ status = "disabled";
+ };
};
nand0: nand at 40000000 {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index aa98e64..83a4889 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -505,6 +505,24 @@
trigger-value = <0x6>;
};
};
+
+ spi0: spi at f0000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xf0000000 0x100>;
+ interrupts = <13 4 3>;
+ status = "disabled";
+ };
+
+ spi1: spi at f0004000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "atmel,at91rm9200-spi";
+ reg = <0xf0004000 0x100>;
+ interrupts = <14 4 3>;
+ status = "disabled";
+ };
};
nand0: nand at 40000000 {
--
1.7.9.5
next prev parent reply other threads:[~2013-03-19 7:50 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-19 7:41 [PATCH v7 00/14] spi/spi-atmel: add dmaengine support for atmel spi controller and to test the device tree support Wenyou Yang
2013-03-19 7:42 ` [PATCH v7 01/14] spi/spi-atmel: detect the capabilities of SPI core by reading the VERSION register Wenyou Yang
2013-04-01 13:38 ` Mark Brown
2013-03-19 7:43 ` [PATCH v7 02/14] spi/spi-atmel: add support transfer on CS1, 2, 3, not only on CS0 Wenyou Yang
2013-04-01 13:41 ` Mark Brown
2013-03-19 7:43 ` [PATCH v7 03/14] spi/spi-atmel: add physical base address Wenyou Yang
2013-04-01 13:41 ` Mark Brown
2013-04-02 5:49 ` Yang, Wenyou
2013-04-02 6:17 ` Yang, Wenyou
2013-03-19 7:44 ` [PATCH v7 04/14] spi/spi-atmel: call unmapping on transfers buffers Wenyou Yang
2013-04-01 13:43 ` Mark Brown
2013-03-19 7:45 ` [PATCH v7 05/14] spi/spi-atmel: status information passed through controller data Wenyou Yang
2013-04-01 13:43 ` Mark Brown
2013-03-19 7:46 ` [PATCH v7 06/14] spi/spi-atmel: add flag to controller data for lock operations Wenyou Yang
2013-04-01 13:46 ` Mark Brown
2013-04-03 5:09 ` Yang, Wenyou
2013-03-19 7:46 ` [PATCH v7 07/14] spi/spi-atmel: add dmaengine support Wenyou Yang
2013-03-19 7:47 ` [PATCH v7 08/14] spi/spi-atmel: fix spi-atmel driver to adapt to slave_config changes Wenyou Yang
2013-04-01 13:51 ` Mark Brown
2013-04-02 5:45 ` Yang, Wenyou
2013-03-19 7:47 ` [PATCH v7 09/14] spi/spi-atmel: correct 16 bits transfers using PIO Wenyou Yang
2013-04-01 13:53 ` Mark Brown
2013-03-19 7:49 ` [PATCH v7 10/14] spi/spi-atmel: correct 16 bits transfers with DMA Wenyou Yang
2013-04-01 13:53 ` Mark Brown
2013-04-02 5:46 ` Yang, Wenyou
2013-03-19 7:49 ` [PATCH v7 11/14] ARM: at91: add clocks for spi dt entries Wenyou Yang
2013-03-19 7:50 ` Wenyou Yang [this message]
2013-03-19 7:51 ` [PATCH v7 13/14] ARM: dts: add spi nodes for the atmel boards Wenyou Yang
2013-03-19 7:52 ` [PATCH v7 14/14] ARM: dts: add pinctrl property for spi node for atmel SoC Wenyou Yang
2013-03-21 9:32 ` [PATCH v7 00/14] spi/spi-atmel: add dmaengine support for atmel spi controller and to test the device tree support Nicolas Ferre
2013-03-22 9:26 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363679457-4204-1-git-send-email-wenyou.yang@atmel.com \
--to=wenyou.yang@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).