From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 5/6] ARM: dts: omap: update usb_otg_hs data
Date: Wed, 20 Mar 2013 14:42:04 +0530 [thread overview]
Message-ID: <1363770725-13717-6-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1363770725-13717-1-git-send-email-kishon@ti.com>
Updated the usb_otg_hs dt data to include the *phy* and *phy-names*
binding in order for the driver to use the new generic PHY framework.
Also updated the Documentation to include the binding information.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
Documentation/devicetree/bindings/usb/omap-usb.txt | 5 +++++
arch/arm/boot/dts/omap3.dtsi | 2 ++
arch/arm/boot/dts/omap4.dtsi | 2 ++
3 files changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index abce256..3d6f9f6 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -19,6 +19,9 @@ OMAP MUSB GLUE
- power : Should be "50". This signifies the controller can supply upto
100mA when operating in host mode.
- usb-phy : the phandle for the PHY device
+ - phy : the phandle for the PHY device (used by generic PHY framework)
+ - phy-names : the names of the PHY corresponding to the PHYs present in the
+ *phy* phandle.
Optional properties:
- ctrl-module : phandle of the control module this glue uses to write to
@@ -33,6 +36,8 @@ usb_otg_hs: usb_otg_hs at 4a0ab000 {
num_eps = <16>;
ram_bits = <12>;
ctrl-module = <&omap_control_usb>;
+ phy = <&usb2_phy>;
+ phy-names = "usb2-phy";
};
Board specific device node entry
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 1e21565..cf50c18 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -405,6 +405,8 @@
interrupt-names = "mc", "dma";
ti,hwmods = "usb_otg_hs";
usb-phy = <&usb2_phy>;
+ phy = <&usb2_phy>;
+ phy-names = "usb2-phy";
multipoint = <1>;
num-eps = <16>;
ram-bits = <12>;
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 06d044e..188d5b8 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -550,6 +550,8 @@
interrupt-names = "mc", "dma";
ti,hwmods = "usb_otg_hs";
usb-phy = <&usb2_phy>;
+ phy = <&usb2_phy>;
+ phy-names = "usb2-phy";
multipoint = <1>;
num-eps = <16>;
ram-bits = <12>;
--
1.7.10.4
next prev parent reply other threads:[~2013-03-20 9:12 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-20 9:11 [PATCH v3 0/6] Generic PHY Framework Kishon Vijay Abraham I
2013-03-20 9:12 ` [PATCH v3 1/6] drivers: phy: add generic PHY framework Kishon Vijay Abraham I
2013-03-20 22:36 ` Sylwester Nawrocki
2013-03-21 5:46 ` kishon
2013-04-15 11:34 ` Grant Likely
2013-04-15 12:26 ` Kishon Vijay Abraham I
2013-04-15 19:50 ` Grant Likely
2013-04-16 10:18 ` Kishon Vijay Abraham I
2013-04-19 9:09 ` Grant Likely
2013-04-22 6:09 ` Kishon Vijay Abraham I
2013-03-20 9:12 ` [PATCH v3 2/6] usb: phy: omap-usb2: use the new " Kishon Vijay Abraham I
2013-03-20 9:12 ` [PATCH v3 3/6] usb: otg: twl4030: " Kishon Vijay Abraham I
2013-03-20 9:12 ` [PATCH v3 4/6] ARM: OMAP: USB: Add phy binding information Kishon Vijay Abraham I
2013-03-20 16:51 ` Tony Lindgren
2013-03-21 5:48 ` kishon
2013-03-20 9:12 ` Kishon Vijay Abraham I [this message]
2013-03-20 20:59 ` [PATCH v3 5/6] ARM: dts: omap: update usb_otg_hs data Stephen Warren
2013-03-21 6:23 ` kishon
2013-03-21 17:10 ` Stephen Warren
2013-03-22 9:20 ` Kishon Vijay Abraham I
2013-03-20 9:12 ` [PATCH v3 6/6] usb: musb: omap2430: use the new generic PHY framework Kishon Vijay Abraham I
2013-04-15 10:20 ` [PATCH v3 0/6] Generic PHY Framework Grant Likely
2013-04-15 10:36 ` Kishon Vijay Abraham I
2013-04-15 11:27 ` Sylwester Nawrocki
2013-04-15 12:26 ` Grant Likely
2013-04-15 12:33 ` Kishon Vijay Abraham I
2013-04-19 10:52 ` Sekhar Nori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363770725-13717-6-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).