From: rogerq@ti.com (Roger Quadros)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 08/21] ARM: OMAP: AM3517evm: Adapt to ehci-omap changes
Date: Wed, 20 Mar 2013 17:44:47 +0200 [thread overview]
Message-ID: <1363794300-31526-9-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1363794300-31526-1-git-send-email-rogerq@ti.com>
Use usbhs_init_phys() to register the PHY's RESET regulators
and the NOP PHY device.
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/mach-omap2/board-am3517evm.c | 17 ++++++++++-------
1 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 9fb8590..191f976 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -274,6 +274,14 @@ static __init void am3517_evm_mcbsp1_init(void)
omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);
}
+static struct usbhs_phy_data phy_data[] __initdata = {
+ {
+ .port = 1,
+ .reset_gpio = 57,
+ .vcc_gpio = -EINVAL,
+ },
+};
+
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
@@ -282,12 +290,6 @@ static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
#else
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
#endif
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
- .phy_reset = true,
- .reset_gpio_port[0] = 57,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
};
#ifdef CONFIG_OMAP_MUX
@@ -349,7 +351,6 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
-
static void __init am3517_evm_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
@@ -361,6 +362,8 @@ static void __init am3517_evm_init(void)
/* Configure GPIO for EHCI port */
omap_mux_init_gpio(57, OMAP_PIN_OUTPUT);
+
+ usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
/* DSS */
--
1.7.4.1
next prev parent reply other threads:[~2013-03-20 15:44 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-20 15:44 [PATCH v4 00/21] ARM: OMAP2+: Adapt to ehci-omap changes for 3.10 Roger Quadros
2013-03-20 15:44 ` [PATCH v4 01/21] usb: phy: nop: Add some parameters to platform data Roger Quadros
2013-03-20 15:55 ` Felipe Balbi
2013-03-20 16:13 ` Tony Lindgren
2013-03-20 16:19 ` Felipe Balbi
2013-04-02 17:21 ` Tony Lindgren
2013-04-03 14:53 ` Roger Quadros
2013-03-20 15:44 ` [PATCH v4 02/21] ARM: OMAP2+: omap-usb-host: Add usbhs_init_phys() Roger Quadros
2013-03-20 15:44 ` [PATCH v4 03/21] ARM: OMAP2+: omap4panda: Adapt to ehci-omap changes Roger Quadros
2013-03-20 15:44 ` [PATCH v4 04/21] ARM: OMAP3: Beagle: " Roger Quadros
2013-03-20 15:44 ` [PATCH v4 05/21] ARM: OMAP3: 3430SDP: " Roger Quadros
2013-03-20 15:44 ` [PATCH v4 06/21] ARM: OMAP3: 3630SDP: " Roger Quadros
2013-03-20 15:44 ` [PATCH v4 07/21] ARM: OMAP: AM3517crane: " Roger Quadros
2013-03-20 15:44 ` Roger Quadros [this message]
2013-03-20 15:44 ` [PATCH v4 09/21] ARM: OMAP3: cm-t35: " Roger Quadros
2013-03-20 15:44 ` [PATCH v4 10/21] ARM: OMAP3: cm-t3517: " Roger Quadros
2013-03-20 15:44 ` [PATCH v4 11/21] ARM: OMAP: devkit8000: " Roger Quadros
2013-03-20 15:44 ` [PATCH v4 12/21] ARM: OMAP3: igep0020: " Roger Quadros
2013-03-20 15:44 ` [PATCH v4 13/21] ARM: OMAP3: omap3evm: " Roger Quadros
2013-03-20 15:44 ` [PATCH v4 14/21] ARM: OMAP3: omap3pandora: " Roger Quadros
2013-03-20 15:44 ` [PATCH v4 15/21] ARM: OMAP3: omap3stalker: " Roger Quadros
2013-03-20 15:44 ` [PATCH v4 16/21] ARM: OMAP3: omap3touchbook: " Roger Quadros
2013-03-20 15:44 ` [PATCH v4 17/21] ARM: OMAP3: overo: " Roger Quadros
2013-03-20 15:44 ` [PATCH v4 18/21] ARM: OMAP: zoom: " Roger Quadros
2013-03-20 15:44 ` [PATCH v4 19/21] ARM: dts: OMAP4: Add HS USB Host IP nodes Roger Quadros
2013-03-20 15:44 ` [PATCH v4 20/21] ARM: dts: OMAP3: " Roger Quadros
2013-03-20 15:45 ` [PATCH v4 21/21] ARM: dts: omap3-beagle: Add USB Host support Roger Quadros
2013-04-05 8:30 ` [PATCH v4 00/21] ARM: OMAP2+: Adapt to ehci-omap changes for 3.10 Benoit Cousson
2013-04-05 9:56 ` Benoit Cousson
2013-04-05 15:43 ` Tony Lindgren
2013-04-08 12:06 ` Benoit Cousson
2013-04-08 17:09 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363794300-31526-9-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).