From: broonie@kernel.org (Mark Brown)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] PM / OPP: Remove ARCH_HAS_OPP
Date: Tue, 22 Jul 2014 15:43:12 +0100 [thread overview]
Message-ID: <1406040192-632-1-git-send-email-broonie@kernel.org> (raw)
From: Mark Brown <broonie@linaro.org>
Since the OPP layer is a kernel library which has been converted to be
directly selectable by its callers rather than user selectable and
requiring architectures to enable it explicitly the ARCH_HAS_OPP symbol
has become redundant and can be removed. Do so.
Signed-off-by: Mark Brown <broonie@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
---
Raphael, IIRC you said that you'd applied this but it seems not to have
appeared in -next. There's a few more references crept in, I'll try to
get them removed at source.
Documentation/power/opp.txt | 3 ---
arch/arm/mach-exynos/Kconfig | 1 -
arch/arm/mach-highbank/Kconfig | 1 -
arch/arm/mach-imx/Kconfig | 1 -
arch/arm/mach-omap2/Kconfig | 1 -
arch/arm/mach-shmobile/Kconfig | 2 --
arch/arm/mach-vexpress/Kconfig | 1 -
arch/arm/mach-zynq/Kconfig | 1 -
drivers/devfreq/Kconfig | 1 -
kernel/power/Kconfig | 3 ---
10 files changed, 15 deletions(-)
diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt
index a9adad828cdc..c6279c2be47c 100644
--- a/Documentation/power/opp.txt
+++ b/Documentation/power/opp.txt
@@ -51,9 +51,6 @@ Typical usage of the OPP library is as follows:
SoC framework -> modifies on required cases certain OPPs -> OPP layer
-> queries to search/retrieve information ->
-Architectures that provide a SoC framework for OPP should select ARCH_HAS_OPP
-to make the OPP layer available.
-
OPP layer expects each domain to be represented by a unique device pointer. SoC
framework registers a set of initial OPPs per device with the OPP layer. This
list is expected to be an optimally small number typically around 5 per device.
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 8f9b66c4ac78..f7889f6a1353 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -100,7 +100,6 @@ config SOC_EXYNOS5440
default y
depends on ARCH_EXYNOS5
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
- select ARCH_HAS_OPP
select HAVE_ARM_ARCH_TIMER
select AUTO_ZRELADDR
select MIGHT_HAVE_PCI
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index a5960e2ac090..31aa866c3317 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -2,7 +2,6 @@ config ARCH_HIGHBANK
bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
select ARCH_HAS_HOLES_MEMORYMODEL
- select ARCH_HAS_OPP
select ARCH_SUPPORTS_BIG_ENDIAN
select ARM_AMBA
select ARM_ERRATA_764369 if SMP
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 2bc7b97861b4..9de84a215abd 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,6 +1,5 @@
menuconfig ARCH_MXC
bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
- select ARCH_HAS_OPP
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
select CLKSRC_MMIO
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 1c1ed737f7ab..e7189dcc9309 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -15,7 +15,6 @@ config ARCH_OMAP3
bool "TI OMAP3"
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
- select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select OMAP_INTERCONNECT
select PM_OPP if PM
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 384221d72d22..5814754c1240 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -92,7 +92,6 @@ config ARCH_R8A73A4
select CPU_V7
select SH_CLK_CPG
select RENESAS_IRQC
- select ARCH_HAS_OPP
select SYS_SUPPORTS_SH_CMT
select SYS_SUPPORTS_SH_TMU
@@ -244,7 +243,6 @@ config MACH_KOELSCH
config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
- select ARCH_HAS_OPP
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_AK4642 if SND_SIMPLE_CARD
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index d8b9330f896a..1af70329b88d 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -64,7 +64,6 @@ config ARCH_VEXPRESS_DCSCB
config ARCH_VEXPRESS_SPC
bool "Versatile Express Serial Power Controller (SPC)"
- select ARCH_HAS_OPP
select PM_OPP
help
The TC2 (A15x2 A7x3) versatile express core tile integrates a logic
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 0c164f81e72d..aaa5162c1509 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -1,6 +1,5 @@
config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
- select ARCH_HAS_OPP
select ARCH_SUPPORTS_BIG_ENDIAN
select ARM_AMBA
select ARM_GIC
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index 49e74c1fc639..3dced0a9eae3 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -68,7 +68,6 @@ comment "DEVFREQ Drivers"
config ARM_EXYNOS4_BUS_DEVFREQ
bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver"
depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM
- select ARCH_HAS_OPP
select DEVFREQ_GOV_SIMPLE_ONDEMAND
select PM_OPP
help
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 9a83d780facd..e4e4121fa327 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -253,9 +253,6 @@ config APM_EMULATION
anything, try disabling/enabling this option (or disabling/enabling
APM in your BIOS).
-config ARCH_HAS_OPP
- bool
-
config PM_OPP
bool
---help---
--
2.0.1
next reply other threads:[~2014-07-22 14:43 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-22 14:43 Mark Brown [this message]
2014-07-22 23:51 ` [PATCH] PM / OPP: Remove ARCH_HAS_OPP Rafael J. Wysocki
-- strict thread matches above, loose matches on Subject: below --
2014-06-06 10:36 Mark Brown
2014-06-06 11:14 ` Simon Horman
2014-06-06 12:14 ` Magnus Damm
2014-06-06 12:50 ` Simon Horman
2014-06-06 13:01 ` Magnus Damm
2014-06-06 13:08 ` Mark Brown
2014-06-06 21:15 ` Rafael J. Wysocki
2014-06-09 19:49 ` Mark Brown
2014-06-09 22:22 ` Rafael J. Wysocki
2014-06-09 22:51 ` Mark Brown
2014-06-10 0:15 ` Rafael J. Wysocki
2014-06-06 13:45 ` Rob Herring
2014-06-06 14:33 ` Nishanth Menon
2014-06-09 1:56 ` Shawn Guo
2014-06-09 4:49 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1406040192-632-1-git-send-email-broonie@kernel.org \
--to=broonie@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).