From mboxrd@z Thu Jan 1 00:00:00 1970 From: thomas.petazzoni@free-electrons.com (Thomas Petazzoni) Date: Wed, 23 Jul 2014 15:00:52 +0200 Subject: [PATCHv3 15/16] ARM: mvebu: add cpuidle support for Armada 38x In-Reply-To: <1406120453-29291-1-git-send-email-thomas.petazzoni@free-electrons.com> References: <1406120453-29291-1-git-send-email-thomas.petazzoni@free-electrons.com> Message-ID: <1406120453-29291-16-git-send-email-thomas.petazzoni@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Gregory CLEMENT Unlike the Armada XP and the Armada 370, this SoC uses a Cortex A9 core. Consequently, the procedure to enter the idle state is different: interaction with the SCU, not disabling snooping, etc. Signed-off-by: Gregory CLEMENT Signed-off-by: Thomas Petazzoni --- arch/arm/mach-mvebu/pmsu.c | 85 ++++++++++++++++++++++++++++++++++++++++++- arch/arm/mach-mvebu/pmsu_ll.S | 14 +++++++ 2 files changed, 98 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index 9190ae8..bd7c66a 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -63,6 +64,18 @@ #define L2C_NFABRIC_PM_CTL 0x4 #define L2C_NFABRIC_PM_CTL_PWR_DOWN BIT(20) +/* PMSU delay registers */ +#define PMSU_POWERDOWN_DELAY 0xF04 +#define PMSU_POWERDOWN_DELAY_PMU BIT(1) +#define PMSU_POWERDOWN_DELAY_MASK 0xFFFE +#define PMSU_DFLT_ARMADA38X_DELAY 0x64 + +/* CA9 MPcore SoC Control registers */ + +#define MPCORE_RESET_CTL 0x64 +#define MPCORE_RESET_CTL_L2 BIT(0) +#define MPCORE_RESET_CTL_DEBUG BIT(16) + #define SRAM_PHYS_BASE 0xFFFF0000 #define BOOTROM_BASE 0xFFF00000 #define BOOTROM_SIZE 0x100000 @@ -74,6 +87,8 @@ extern void ll_disable_coherency(void); extern void ll_enable_coherency(void); extern void armada_370_xp_cpu_resume(void); +extern void armada_38x_cpu_resume(void); + static phys_addr_t pmsu_mp_phys_base; static void __iomem *pmsu_mp_base; @@ -287,6 +302,32 @@ static int armada_370_xp_cpu_suspend(unsigned long deepidle) return cpu_suspend(deepidle, armada_370_xp_pmsu_idle_enter); } +static int armada_38x_do_cpu_suspend(unsigned long deepidle) +{ + unsigned long flags = 0; + + if (deepidle) + flags |= PMSU_PREPARE_DEEP_IDLE; + + mvebu_v7_pmsu_idle_prepare(flags); + /* + * Already flushed cache, but do it again as the outer cache + * functions dirty the cache with spinlocks + */ + v7_exit_coherency_flush(louis); + + scu_power_mode(mvebu_get_scu_base(), SCU_PM_POWEROFF); + + cpu_do_idle(); + + return 1; +} + +static int armada_38x_cpu_suspend(unsigned long deepidle) +{ + return cpu_suspend(false, armada_38x_do_cpu_suspend); +} + /* No locking is needed because we only access per-CPU registers */ void mvebu_v7_pmsu_idle_exit(void) { @@ -295,7 +336,6 @@ void mvebu_v7_pmsu_idle_exit(void) if (pmsu_mp_base == NULL) return; - /* cancel ask HW to power down the L2 Cache if possible */ reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); reg &= ~PMSU_CONTROL_AND_CONFIG_L2_PWDDN; @@ -359,6 +399,47 @@ static __init int armada_370_cpuidle_init(void) return 0; } +static __init int armada_38x_cpuidle_init(void) +{ + struct device_node *np; + void __iomem *mpsoc_base; + u32 reg; + + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-380-coherency-fabric"); + if (!np) + return -ENODEV; + of_node_put(np); + + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-380-mpcore-soc-ctrl"); + if (!np) + return -ENODEV; + mpsoc_base = of_iomap(np, 0); + BUG_ON(!mpsoc_base); + of_node_put(np); + + /* Set up reset mask when powering down the cpus */ + reg = readl(mpsoc_base + MPCORE_RESET_CTL); + reg |= MPCORE_RESET_CTL_L2; + reg |= MPCORE_RESET_CTL_DEBUG; + writel(reg, mpsoc_base + MPCORE_RESET_CTL); + iounmap(mpsoc_base); + + /* Set up delay */ + reg = readl(pmsu_mp_base + PMSU_POWERDOWN_DELAY); + reg &= ~PMSU_POWERDOWN_DELAY_MASK; + reg |= PMSU_DFLT_ARMADA38X_DELAY; + reg |= PMSU_POWERDOWN_DELAY_PMU; + writel(reg, pmsu_mp_base + PMSU_POWERDOWN_DELAY); + + mvebu_cpu_resume = armada_38x_cpu_resume; + mvebu_v7_cpuidle_device.dev.platform_data = armada_38x_cpu_suspend; + mvebu_v7_cpuidle_device.name = "cpuidle-armada-38x"; + + return 0; +} + static __init int armada_xp_cpuidle_init(void) { struct device_node *np; @@ -389,6 +470,8 @@ static int __init mvebu_v7_cpu_pm_init(void) ret = armada_xp_cpuidle_init(); else if (of_machine_is_compatible("marvell,armada370")) ret = armada_370_cpuidle_init(); + else if (of_machine_is_compatible("marvell,armada380")) + ret = armada_38x_cpuidle_init(); else return 0; diff --git a/arch/arm/mach-mvebu/pmsu_ll.S b/arch/arm/mach-mvebu/pmsu_ll.S index 17d7f3b..a945756 100644 --- a/arch/arm/mach-mvebu/pmsu_ll.S +++ b/arch/arm/mach-mvebu/pmsu_ll.S @@ -23,6 +23,20 @@ ARM_BE8(setend be ) @ go BE8 if entered LE b cpu_resume ENDPROC(armada_370_xp_cpu_resume) +ENTRY(armada_38x_cpu_resume) + /* do we need it for Armada 38x*/ +ARM_BE8(setend be ) @ go BE8 if entered LE + bl v7_invalidate_l1 + mrc p15, 4, r1, c15, c0 @ get SCU base address + orr r1, r1, #0x8 @ SCU CPU Power Status Register + mrc 15, 0, r0, cr0, cr0, 5 @ get the CPU ID + and r0, r0, #15 + add r1, r1, r0 + mov r0, #0x0 + strb r0, [r1] @ switch SCU power state to Normal mode + b cpu_resume +ENDPROC(armada_38x_cpu_resume) + .global mvebu_boot_wa_start .global mvebu_boot_wa_end -- 2.0.0