From mboxrd@z Thu Jan 1 00:00:00 1970 From: dianders@chromium.org (Doug Anderson) Date: Wed, 6 Aug 2014 10:09:40 -0700 Subject: [PATCH v3 0/4] Add eMMC and SD card support for rk3288-evb Message-ID: <1407344984-14176-1-git-send-email-dianders@chromium.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This series adds basic eMMC and SD card support for the rk3288-evb board based on Addy's posted dw_mmc patch from: https://patchwork.kernel.org/patch/4653631/ The series is a little tricky because: * Jaehoon has some outstanding patches to remove the slot node. Since those haven't landed yet, I've posted my original patch with the slot node and then some future patches that can land with Jaehoon's patches. So just to be explicit: - Patch #1 and #2 can land after Addy's patch lands. - Patch #3 and #4 can land after Jaehoon's patch lands, though there's no huge hurry since Jaehoon's patch supports the old mode (it just prints a warning). Note that we don't have regulators specified yet (no regulator driver for rk808-based board). We also don't yet support UHS modes or MMC DDR50 (which require regulator support plus dw_mmc driver support for tuning). Those features can come later. Changes in v3: - Removed DDR50 mode since it needs tuning, which isn't there yet. Changes in v2: - New patchwork link for Addy's patch - Squashed in the DDR50 mode since Addy spun his patch. - Refer to the new title of Jaehoon's patch Doug Anderson (4): ARM: dts: Add emmc and sdmmc to the rk3288 device tree ARM: dts: Enable emmc and sdmmc on the rk3288-evb boards ARM: dts: Take the mmc slot node out of rk3288-evb ARM: dts: mmc slot node gone on rk3288 => no more address / size cells arch/arm/boot/dts/rk3288-evb.dtsi | 24 ++++++++++++++++++++++++ arch/arm/boot/dts/rk3288.dtsi | 18 ++++++++++++++++++ 2 files changed, 42 insertions(+) -- 2.0.0.526.g5318336