From: hanjun.guo@linaro.org (Hanjun Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 14/17] ARM64 / ACPI: Parse GTDT to initialize arch timer
Date: Mon, 1 Sep 2014 22:57:52 +0800 [thread overview]
Message-ID: <1409583475-6978-15-git-send-email-hanjun.guo@linaro.org> (raw)
In-Reply-To: <1409583475-6978-1-git-send-email-hanjun.guo@linaro.org>
Using the information presented by GTDT to initialize the arch
timer (not memory-mapped).
Originally-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
arch/arm64/kernel/time.c | 7 ++
drivers/clocksource/arm_arch_timer.c | 117 ++++++++++++++++++++++++++++------
include/linux/clocksource.h | 6 ++
3 files changed, 111 insertions(+), 19 deletions(-)
diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c
index 1a7125c..42f9195 100644
--- a/arch/arm64/kernel/time.c
+++ b/arch/arm64/kernel/time.c
@@ -35,6 +35,7 @@
#include <linux/delay.h>
#include <linux/clocksource.h>
#include <linux/clk-provider.h>
+#include <linux/acpi.h>
#include <clocksource/arm_arch_timer.h>
@@ -72,6 +73,12 @@ void __init time_init(void)
tick_setup_hrtimer_broadcast();
+ /*
+ * Since ACPI or FDT will only one be available in the system,
+ * we can use acpi_generic_timer_init() here safely
+ */
+ acpi_generic_timer_init();
+
arch_timer_rate = arch_timer_get_rate();
if (!arch_timer_rate)
panic("Unable to initialise architected timer.\n");
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 5163ec1..397783f 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/sched_clock.h>
+#include <linux/acpi.h>
#include <asm/arch_timer.h>
#include <asm/virt.h>
@@ -338,8 +339,12 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np)
if (arch_timer_rate)
return;
- /* Try to determine the frequency from the device tree or CNTFRQ */
- if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) {
+ /*
+ * Try to determine the frequency from the device tree or CNTFRQ,
+ * if ACPI is enabled, get the frequency from CNTFRQ ONLY.
+ */
+ if (!acpi_disabled ||
+ of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) {
if (cntbase)
arch_timer_rate = readl_relaxed(cntbase + CNTFRQ);
else
@@ -635,20 +640,8 @@ static void __init arch_timer_common_init(void)
arch_timer_arch_init();
}
-static void __init arch_timer_init(struct device_node *np)
+static void __init arch_timer_init(void)
{
- int i;
-
- if (arch_timers_present & ARCH_CP15_TIMER) {
- pr_warn("arch_timer: multiple nodes in dt, skipping\n");
- return;
- }
-
- arch_timers_present |= ARCH_CP15_TIMER;
- for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
- arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
- arch_timer_detect_rate(NULL, np);
-
/*
* If HYP mode is available, we know that the physical timer
* has been configured to be accessible from PL1. Use it, so
@@ -667,13 +660,31 @@ static void __init arch_timer_init(struct device_node *np)
}
}
- arch_timer_c3stop = !of_property_read_bool(np, "always-on");
-
arch_timer_register();
arch_timer_common_init();
}
-CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_init);
-CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_init);
+
+static void __init arch_timer_of_init(struct device_node *np)
+{
+ int i;
+
+ if (arch_timers_present & ARCH_CP15_TIMER) {
+ pr_warn("arch_timer: multiple nodes in dt, skipping\n");
+ return;
+ }
+
+ arch_timers_present |= ARCH_CP15_TIMER;
+ for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++)
+ arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
+
+ arch_timer_detect_rate(NULL, np);
+
+ arch_timer_c3stop = !of_property_read_bool(np, "always-on");
+
+ arch_timer_init();
+}
+CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
+CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
static void __init arch_timer_mem_init(struct device_node *np)
{
@@ -740,3 +751,71 @@ static void __init arch_timer_mem_init(struct device_node *np)
}
CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem",
arch_timer_mem_init);
+
+#ifdef CONFIG_ACPI
+static int __init
+map_generic_timer_interrupt(u32 interrupt, u32 flags)
+{
+ int trigger, polarity;
+
+ if (!interrupt)
+ return 0;
+
+ trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
+ : ACPI_LEVEL_SENSITIVE;
+
+ polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
+ : ACPI_ACTIVE_HIGH;
+
+ return acpi_register_gsi(NULL, interrupt, trigger, polarity);
+}
+
+/* Initialize per-processor generic timer */
+static int __init arch_timer_acpi_init(struct acpi_table_header *table)
+{
+ struct acpi_table_gtdt *gtdt;
+
+ if (arch_timers_present & ARCH_CP15_TIMER) {
+ pr_warn("arch_timer: already initialized, skipping\n");
+ return -EINVAL;
+ }
+
+ gtdt = container_of(table, struct acpi_table_gtdt, header);
+
+ arch_timers_present |= ARCH_CP15_TIMER;
+
+ arch_timer_ppi[PHYS_SECURE_PPI] =
+ map_generic_timer_interrupt(gtdt->secure_el1_interrupt,
+ gtdt->secure_el1_flags);
+
+ arch_timer_ppi[PHYS_NONSECURE_PPI] =
+ map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt,
+ gtdt->non_secure_el1_flags);
+
+ arch_timer_ppi[VIRT_PPI] =
+ map_generic_timer_interrupt(gtdt->virtual_timer_interrupt,
+ gtdt->virtual_timer_flags);
+
+ arch_timer_ppi[HYP_PPI] =
+ map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt,
+ gtdt->non_secure_el2_flags);
+
+ /* Get the frequency from CNTFRQ */
+ arch_timer_detect_rate(NULL, NULL);
+
+ /* Always-on capability */
+ arch_timer_c3stop = !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON);
+
+ arch_timer_init();
+ return 0;
+}
+
+/* Initialize all the generic timers presented in GTDT */
+void __init acpi_generic_timer_init(void)
+{
+ if (acpi_disabled)
+ return;
+
+ acpi_table_parse(ACPI_SIG_GTDT, arch_timer_acpi_init);
+}
+#endif
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 653f0e2..5839f98 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -346,4 +346,10 @@ extern void clocksource_of_init(void);
static inline void clocksource_of_init(void) {}
#endif
+#ifdef CONFIG_ACPI
+void acpi_generic_timer_init(void);
+#else
+static inline void acpi_generic_timer_init(void) {}
+#endif
+
#endif /* _LINUX_CLOCKSOURCE_H */
--
1.7.9.5
next prev parent reply other threads:[~2014-09-01 14:57 UTC|newest]
Thread overview: 117+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-01 14:57 [PATCH v3 00/17] Introduce ACPI for ARM64 based on ACPI 5.1 Hanjun Guo
2014-09-01 14:57 ` [PATCH v3 01/17] ARM64: Move the init of cpu_logical_map(0) before unflatten_device_tree() Hanjun Guo
2014-09-01 14:57 ` [PATCH v3 02/17] ARM64 / ACPI: Get RSDP and ACPI boot-time tables Hanjun Guo
2014-09-09 16:26 ` Catalin Marinas
2014-09-09 16:41 ` Jon Masters
2014-09-09 16:44 ` Jon Masters
2014-09-09 17:15 ` Mark Rutland
2014-09-09 17:33 ` Jon Masters
2014-09-09 17:50 ` Lorenzo Pieralisi
2014-09-09 18:05 ` Sudeep Holla
2014-09-09 19:06 ` Jon Masters
2014-09-10 11:13 ` Hanjun Guo
2014-09-10 12:33 ` Catalin Marinas
2014-09-10 21:51 ` Grant Likely
2014-09-11 11:01 ` Catalin Marinas
2014-09-14 15:40 ` Grant Likely
2014-09-14 21:59 ` Catalin Marinas
2014-09-15 3:53 ` Grant Likely
2014-09-16 5:29 ` Zheng, Lv
2014-09-10 21:41 ` Grant Likely
2014-09-09 16:54 ` Mark Rutland
2014-09-10 7:30 ` Hanjun Guo
2014-09-10 21:37 ` Grant Likely
2014-09-01 14:57 ` [PATCH v3 03/17] ARM64 / ACPI: Introduce lowlevel suspend function Hanjun Guo
2014-09-09 16:35 ` Catalin Marinas
2014-09-09 22:04 ` Graeme Gregory
2014-09-01 14:57 ` [PATCH v3 04/17] ARM64 / ACPI: Introduce early_param for "acpi" Hanjun Guo
2014-09-09 16:37 ` Catalin Marinas
2014-09-09 17:17 ` Bjorn Helgaas
2014-09-09 22:14 ` Jon Masters
2014-09-10 13:04 ` Will Deacon
2014-09-10 13:21 ` Bjorn Helgaas
2014-09-10 18:30 ` Will Deacon
2014-09-10 21:58 ` Grant Likely
2014-09-01 14:57 ` [PATCH v3 05/17] ARM64 / ACPI: If we chose to boot from acpi then disable FDT Hanjun Guo
2014-09-01 14:57 ` [PATCH v3 06/17] ARM64 / ACPI: Make PCI optional for ACPI on ARM64 Hanjun Guo
2014-09-01 14:57 ` [PATCH v3 07/17] ARM64 / ACPI: Parse FADT table to get PSCI flags for PSCI init Hanjun Guo
2014-09-01 14:57 ` [PATCH v3 08/17] ACPI / table: Print GIC information when MADT is parsed Hanjun Guo
2014-09-01 14:57 ` [PATCH v3 09/17] ARM64 / ACPI: Parse MADT for SMP initialization Hanjun Guo
2014-09-03 17:21 ` Lorenzo Pieralisi
2014-09-04 15:29 ` Hanjun Guo
2014-09-09 4:29 ` Jon Masters
2014-09-09 5:11 ` Hanjun Guo
2014-09-09 5:34 ` Jon Masters
2014-09-09 16:52 ` Lorenzo Pieralisi
2014-09-09 17:00 ` Jon Masters
2014-09-09 17:02 ` Jon Masters
2014-09-09 4:23 ` Jon Masters
2014-09-09 4:57 ` Hanjun Guo
2014-09-09 5:44 ` Jon Masters
2014-09-09 16:00 ` Hanjun Guo
2014-09-09 16:04 ` Jon Masters
2014-09-09 16:14 ` Hanjun Guo
2014-09-11 14:15 ` Will Deacon
2014-09-12 21:30 ` Jon Masters
2014-09-11 10:24 ` Grant Likely
2014-09-01 14:57 ` [PATCH v3 10/17] ACPI / processor: Make it possible to get CPU hardware ID via GICC Hanjun Guo
2014-09-03 16:27 ` Lorenzo Pieralisi
2014-09-08 13:10 ` Hanjun Guo
2014-09-01 14:57 ` [PATCH v3 11/17] ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi Hanjun Guo
2014-09-11 11:08 ` Grant Likely
2014-09-11 11:34 ` Grant Likely
2014-09-12 9:42 ` Hanjun Guo
2014-09-01 14:57 ` [PATCH v3 12/17] ACPI / table: Add new function to get table entries Hanjun Guo
2014-09-01 14:57 ` [PATCH v3 13/17] ARM64 / ACPI: Add GICv2 specific ACPI boot support Hanjun Guo
2014-09-01 17:35 ` Marc Zyngier
2014-09-02 8:28 ` [Linaro-acpi] " Alexander Spyridakis
2014-09-02 11:48 ` Tomasz Nowicki
2014-09-02 13:02 ` Marc Zyngier
2014-09-02 15:45 ` Hanjun Guo
2014-09-02 15:59 ` Marc Zyngier
2014-09-02 16:11 ` Sudeep Holla
2014-09-03 10:30 ` Marc Zyngier
2014-09-03 11:17 ` Hanjun Guo
2014-09-04 14:03 ` Hanjun Guo
2014-09-09 6:21 ` Jon Masters
2014-09-03 9:26 ` Tomasz Nowicki
2014-09-03 14:57 ` Arnd Bergmann
2014-09-05 8:52 ` Tomasz Nowicki
2014-09-05 9:47 ` Marc Zyngier
2014-09-05 10:13 ` [Linaro-acpi] " Arnd Bergmann
2014-09-05 10:36 ` Tomasz Nowicki
2014-09-05 10:39 ` Marc Zyngier
2014-09-05 10:49 ` Tomasz Nowicki
2014-09-09 6:27 ` Jon Masters
2014-09-11 13:43 ` Grant Likely
2014-09-02 16:34 ` Catalin Marinas
2014-09-11 11:48 ` Grant Likely
2014-09-11 12:01 ` Marc Zyngier
2014-09-09 6:14 ` Jon Masters
2014-09-03 18:42 ` Arnd Bergmann
2014-09-04 10:10 ` Tomasz Nowicki
2014-09-04 10:14 ` Arnd Bergmann
2014-09-04 10:39 ` Tomasz Nowicki
2014-09-09 6:35 ` Jon Masters
2014-09-01 14:57 ` Hanjun Guo [this message]
2014-09-01 14:57 ` [PATCH v3 15/17] ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64 Hanjun Guo
2014-09-01 14:57 ` [PATCH v3 16/17] ARM64 / ACPI: Enable ARM64 in Kconfig Hanjun Guo
2014-09-11 15:18 ` Lorenzo Pieralisi
2014-09-01 14:57 ` [PATCH v3 17/17] Documentation: ACPI for ARM64 Hanjun Guo
2014-09-11 13:29 ` [PATCH v3 00/17] Introduce ACPI for ARM64 based on ACPI 5.1 Grant Likely
2014-09-11 13:49 ` Will Deacon
2014-09-12 21:38 ` Jon Masters
2014-09-12 21:43 ` Jon Masters
2014-09-15 4:21 ` Grant Likely
2014-09-11 14:23 ` Rafael J. Wysocki
2014-09-11 14:04 ` Grant Likely
2014-09-11 15:37 ` Catalin Marinas
2014-09-11 15:57 ` Sudeep Holla
2014-09-11 16:06 ` Graeme Gregory
2014-09-11 16:14 ` Sudeep Holla
2014-09-15 4:31 ` Grant Likely
2014-09-15 9:15 ` Catalin Marinas
2014-09-15 22:48 ` Grant Likely
2014-09-16 10:12 ` Catalin Marinas
2014-09-11 16:05 ` Olof Johansson
2014-09-15 4:37 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409583475-6978-15-git-send-email-hanjun.guo@linaro.org \
--to=hanjun.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).