Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 00/15] Krait clocks + Krait CPUfreq
Date: Fri,  5 Sep 2014 15:47:19 -0700
Message-ID: <1409957256-23729-1-git-send-email-sboyd@codeaurora.org> (raw)

These patches provide cpufreq scaling on devices with Krait CPUs.
In Krait CPU designs there's one PLL and two muxes per CPU, allowing
us to switch CPU frequencies independently.

				 secondary
	 +-----+                    +
	 | QSB |-------+------------|\
	 +-----+       |            | |-+
		       |    +-------|/  |
		       |    |       +   |
	 +-----+       |    |           |
	 | PLL |----+-------+           |   primary
	 +-----+    |  |                |     +
		    |  |                +-----|\       +------+
	 +-------+  |  |                      | \      |      |
	 | HFPLL |----------+-----------------|  |-----| CPU0 |
	 +-------+  |  |    |                 |  |     |      |
		    |  |    | +-----+         | /      +------+
		    |  |    +-| / 2 |---------|/
		    |  |      +-----+         +
		    |  |         secondary
		    |  |            +
		    |  +------------|\
		    |               | |-+
		    +---------------|/  |   primary
				    +   |     +
					+-----|\       +------+
	 +-------+                            | \      |      |
	 | HFPLL |----------------------------|  |-----| CPU1 |
	 +-------+          |                 |  |     |      |
			    | +-----+         | /      +------+
			    +-| / 2 |---------|/
			      +-----+         +

To support this in the common clock framework we model the muxes,
dividers, and PLLs as different clocks. CPUfreq only interacts
with the primary mux (farthest right in the diagram). When CPUfreq
sets a rate, the mux code finds the best parent that can provide the rate.
Due to the design, QSB and the top PLL are always a fixed rate and thus
only support one frequency each. These sources provide the lowest
frequencies for the CPUs. The HFPLLs are where we can make the CPU go
faster (GHz range). Sometimes we need to run the HFPLL twice as
fast and divide it by two to get a particular frequency.

When switching rates we can't leave the CPU clocked by the HFPLL because
we need to turn off the output of the PLL when changing its frequency.
This means we have to switch over to the secondary mux and use one of the
fixed sources. This is why we need something like the safe parent patch.

I plan to submit the DTS changes through arm-soc, but I've included everything
here to make it easier to pick things up for testing, etc. Please note
that these patches rely on the Krait L2 accessor patch I posted a while back
in another series[1]. This also relies on the cpufreq-generic patchset from
Viresh[2]. If anything can be picked up right now it would be better
to reduce the churn over time as other pieces settle. The series gets
progressively more controversial as it goes on, so I hope that things
near the beggining will be picked up earlier.

Changes since v1:
 * Added IPQ and APQ8064 support
 * Switched to cpufreq-generic
 * Added OPP parsing from DT (need to write binding though)
 * New patches to make clk-generic.c go away
  * Made mux and divider reusable for non-MMIO devices
  * Added a mux_determine_rate_closest (not sure if this is really needed)
  * Added unregistration of muxes
 * New patch to avoid sending high frequencies down to devices using clocks

TODO:
 * Add Krait regulator voltage scaling (not strictly necessary)
 * Document DT bindings
 * Use a new efuse/eeprom API instead of hardcoding the location in the driver
 * Add some thermal awareness


Stephen Boyd (15):
  clk: mux: Add unregistration API
  clk: mux: Split out register accessors for reuse
  clk: Add __clk_mux_determine_rate_closest
  clk: divider: Make generic for usage elsewhere
  clk: Add safe switch hook
  clk: Avoid sending high rates to downstream clocks during set_rate
  clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
  clk: qcom: Add HFPLL driver
  clk: qcom: Add MSM8960/APQ8064's HFPLLs
  clk: qcom: Add IPQ806X's HFPLLs
  clk: qcom: Add support for Krait clocks
  clk: qcom: Add KPSS ACC/GCC driver
  clk: qcom: Add Krait clock controller driver
  cpufreq: Add module to register cpufreq on Krait CPUs
  ARM: dts: qcom: Add necessary DT data for Krait cpufreq

 arch/arm/boot/dts/qcom-apq8064.dtsi          | 230 +++++++++++++++++
 arch/arm/boot/dts/qcom-msm8960.dtsi          |  49 ++++
 arch/arm/boot/dts/qcom-msm8974.dtsi          | 311 ++++++++++++++++++++++-
 drivers/clk/clk-divider.c                    | 197 +++++++++------
 drivers/clk/clk-mux.c                        |  91 ++++---
 drivers/clk/clk.c                            | 133 +++++++---
 drivers/clk/qcom/Kconfig                     |  28 +++
 drivers/clk/qcom/Makefile                    |   5 +
 drivers/clk/qcom/clk-hfpll.c                 | 253 +++++++++++++++++++
 drivers/clk/qcom/clk-hfpll.h                 |  54 ++++
 drivers/clk/qcom/clk-krait.c                 | 166 +++++++++++++
 drivers/clk/qcom/clk-krait.h                 |  49 ++++
 drivers/clk/qcom/gcc-ipq806x.c               |  83 +++++++
 drivers/clk/qcom/gcc-msm8960.c               | 172 +++++++++++++
 drivers/clk/qcom/hfpll.c                     | 110 +++++++++
 drivers/clk/qcom/kpss-xcc.c                  |  94 +++++++
 drivers/clk/qcom/krait-cc.c                  | 357 +++++++++++++++++++++++++++
 drivers/cpufreq/Kconfig.arm                  |   9 +
 drivers/cpufreq/Makefile                     |   1 +
 drivers/cpufreq/qcom-cpufreq.c               | 199 +++++++++++++++
 include/dt-bindings/clock/qcom,gcc-msm8960.h |   2 +
 include/linux/clk-private.h                  |   2 +
 include/linux/clk-provider.h                 |  32 ++-
 23 files changed, 2486 insertions(+), 141 deletions(-)
 create mode 100644 drivers/clk/qcom/clk-hfpll.c
 create mode 100644 drivers/clk/qcom/clk-hfpll.h
 create mode 100644 drivers/clk/qcom/clk-krait.c
 create mode 100644 drivers/clk/qcom/clk-krait.h
 create mode 100644 drivers/clk/qcom/hfpll.c
 create mode 100644 drivers/clk/qcom/kpss-xcc.c
 create mode 100644 drivers/clk/qcom/krait-cc.c
 create mode 100644 drivers/cpufreq/qcom-cpufreq.c

[1] http://lkml.iu.edu/hypermail/linux/kernel/1404.0/02636.html
[2] git://git.linaro.org/people/viresh.kumar/linux cpufreq/cpu0-krait-v3
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

             reply index

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-05 22:47 Stephen Boyd [this message]
2014-09-05 22:47 ` [PATCH v2 01/15] clk: mux: Add unregistration API Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 02/15] clk: mux: Split out register accessors for reuse Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 03/15] clk: Add __clk_mux_determine_rate_closest Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 04/15] clk: divider: Make generic for usage elsewhere Stephen Boyd
2014-10-03 18:07   ` Stephen Boyd
2014-10-07 17:27     ` Srinivas Kandagatla
2014-10-07 18:26       ` Stephen Boyd
2014-10-07 19:28         ` Srinivas Kandagatla
2014-10-08 15:04         ` Srinivas Kandagatla
2014-09-05 22:47 ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 05/15] clk: Add safe switch hook Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 06/15] clk: Avoid sending high rates to downstream clocks during set_rate Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 07/15] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 08/15] clk: qcom: Add HFPLL driver Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 09/15] clk: qcom: Add MSM8960/APQ8064's HFPLLs Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 10/15] clk: qcom: Add IPQ806X's HFPLLs Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 11/15] clk: qcom: Add support for Krait clocks Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 12/15] clk: qcom: Add KPSS ACC/GCC driver Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 13/15] clk: qcom: Add Krait clock controller driver Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 14/15] cpufreq: Add module to register cpufreq on Krait CPUs Stephen Boyd
2014-09-08  4:46   ` Viresh Kumar
2014-09-08 17:15     ` Christopher Covington
2014-09-09  0:37     ` Stephen Boyd
2014-09-09  4:53       ` Viresh Kumar
2014-09-05 22:47 ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 15/15] ARM: dts: qcom: Add necessary DT data for Krait cpufreq Stephen Boyd
2014-09-08  9:42 ` [PATCH v2 00/15] Krait clocks + Krait CPUfreq Pramod Gurav
2014-09-08 11:59   ` Pramod Gurav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1409957256-23729-1-git-send-email-sboyd@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org
	public-inbox-index linux-arm-kernel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git