From: geoff@infradead.org (Geoff Levand)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/7] arm64 kexec kernel patches V3
Date: Tue, 30 Sep 2014 14:27:56 -0700 [thread overview]
Message-ID: <1412112476.6630.56.camel@smoke> (raw)
In-Reply-To: <20140930202904.GB24153@redhat.com>
Hi Vivek,
On Tue, 2014-09-30 at 16:29 -0400, Vivek Goyal wrote:
> On Thu, Sep 25, 2014 at 12:23:26AM +0000, Geoff Levand wrote:
>
> [..]
> > To load a second stage kernel and execute a kexec re-boot on arm64 my patches to
> > kexec-tools [2], which have not yet been merged upstream, are needed.
> >
> > This series does not include some re-work of the spin-table CPU enable method
> > that is needed to support it,
>
> How do I figure out if my system has spin table enable method or psci
> enable method. Can one change it. I wanted to test your patches.
The enable method is a function the firmware/bootloader provides.
Multiple methods may be supported. The boot-wrapper-aarch64
build defaults to spin-table, but has the configure option --enable-psci.
For a running system you can check the device tree:
cat /proc/device-tree/cpus/cpu\@0/enable-method | hexdump -C
Or the dmsg:
dmesg | egrep -i 'psci'
Or use the --debug option to kexec:
kexec --debug --load /boot/vmlinux.strip ...
read_cpu_info:398: cpu-0 (/cpus/cpu at 0): hwid-0, 'psci'
-Geoff
next prev parent reply other threads:[~2014-09-30 21:27 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-25 0:23 [PATCH 0/7] arm64 kexec kernel patches V3 Geoff Levand
2014-09-25 0:23 ` [PATCH 3/7] arm64: Add new hcall HVC_CALL_FUNC Geoff Levand
2014-09-25 0:23 ` [PATCH 4/7] arm64: Add EL2 switch to soft_restart Geoff Levand
2014-09-25 0:23 ` [PATCH 2/7] arm64: Convert hcalls to use ISS field Geoff Levand
2014-10-03 10:51 ` Mark Rutland
2014-10-03 21:56 ` Geoff Levand
2014-10-06 10:13 ` Mark Rutland
2014-09-25 0:23 ` [PATCH 1/7] arm64/kvm: Fix assembler compatibility of macros Geoff Levand
2014-10-03 10:26 ` Mark Rutland
2014-10-03 22:27 ` Geoff Levand
2014-10-06 10:10 ` Mark Rutland
2014-09-25 0:23 ` [PATCH 7/7] arm64/kexec: Enable kexec in the arm64 defconfig Geoff Levand
2014-09-25 0:23 ` [PATCH 5/7] arm64: Move proc-macros.S to include/asm Geoff Levand
2014-09-25 0:23 ` [PATCH 6/7] arm64/kexec: Add core kexec support Geoff Levand
2014-09-25 18:28 ` Vivek Goyal
2014-09-25 19:02 ` Geoff Levand
2014-09-25 19:08 ` Vivek Goyal
2014-09-30 18:18 ` Vivek Goyal
2014-09-30 19:54 ` Geoff Levand
2014-10-01 14:56 ` Vivek Goyal
2014-10-03 18:35 ` Geoff Levand
2014-10-07 13:44 ` Vivek Goyal
2014-10-07 18:42 ` Geoff Levand
2014-10-07 18:45 ` Vivek Goyal
2014-10-07 20:12 ` Geoff Levand
2014-10-07 20:22 ` Vivek Goyal
2014-10-09 22:26 ` Geoff Levand
2014-10-23 23:08 ` Geoff Levand
2014-10-08 9:28 ` Mark Rutland
2014-10-07 18:48 ` Vivek Goyal
2014-10-01 16:16 ` Mark Rutland
2014-10-01 17:36 ` Vivek Goyal
2014-10-01 17:56 ` Mark Rutland
2014-10-01 17:47 ` Vivek Goyal
2014-10-01 18:03 ` Mark Rutland
2014-10-01 18:09 ` Vivek Goyal
2014-10-01 18:19 ` Mark Rutland
2014-10-01 18:31 ` Vivek Goyal
2014-10-01 19:22 ` Vivek Goyal
2014-10-02 10:26 ` Mark Rutland
2014-10-02 13:54 ` Vivek Goyal
2014-10-02 16:53 ` Mark Rutland
2014-09-30 23:59 ` [PATCH V2 " Geoff Levand
2014-09-30 20:29 ` [PATCH 0/7] arm64 kexec kernel patches V3 Vivek Goyal
2014-09-30 21:27 ` Geoff Levand [this message]
2014-10-02 19:08 ` Vivek Goyal
2014-10-02 22:59 ` Geoff Levand
2014-10-07 13:43 ` Vivek Goyal
2014-10-07 14:06 ` Mark Rutland
2014-10-01 15:19 ` Vivek Goyal
2014-10-03 21:16 ` Geoff Levand
2014-10-07 13:40 ` Vivek Goyal
2014-10-07 18:29 ` Geoff Levand
2014-10-08 9:42 ` Mark Rutland
2014-10-09 3:21 ` Dave Young
2014-10-09 10:09 ` Mark Rutland
2014-10-09 10:19 ` Ard Biesheuvel
2014-10-10 5:30 ` Dave Young
2014-10-07 15:22 ` Mark Rutland
2014-10-07 18:28 ` Geoff Levand
2014-10-07 18:09 ` Vivek Goyal
2014-10-07 20:07 ` Geoff Levand
2014-10-08 9:52 ` Leif Lindholm
2014-10-08 10:07 ` Mark Rutland
2014-10-09 9:22 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412112476.6630.56.camel@smoke \
--to=geoff@infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).