linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: lee.jones@linaro.org (Lee Jones)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/4] clk: Provide an always-on clock domain framework
Date: Wed, 18 Feb 2015 16:15:00 +0000	[thread overview]
Message-ID: <1424276101-30137-4-git-send-email-lee.jones@linaro.org> (raw)
In-Reply-To: <1424276101-30137-1-git-send-email-lee.jones@linaro.org>

Much h/w contain clocks which if turned off would prove fatal.  The
only way to recover is to restart the board(s).  This driver takes
references to clocks which are required to be always-on in order to
prevent the common clk framework from trying to turn them off during
the clk_disabled_unused() procedure.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/clk/Makefile    |  1 +
 drivers/clk/clkdomain.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 64 insertions(+)
 create mode 100644 drivers/clk/clkdomain.c

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index d5fba5b..d9e2718 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_HAVE_CLK)		+= clk-devres.o
 obj-$(CONFIG_CLKDEV_LOOKUP)	+= clkdev.o
 obj-$(CONFIG_COMMON_CLK)	+= clk.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-divider.o
+obj-$(CONFIG_COMMON_CLK)	+= clkdomain.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-fixed-factor.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-fixed-rate.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-gate.o
diff --git a/drivers/clk/clkdomain.c b/drivers/clk/clkdomain.c
new file mode 100644
index 0000000..8c83f99
--- /dev/null
+++ b/drivers/clk/clkdomain.c
@@ -0,0 +1,63 @@
+/*
+ * ST Clock Domain
+ *
+ * Copyright (C) 2015 STMicroelectronics ? All Rights Reserved
+ *
+ * Author: Lee Jones <lee.jones@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk-private.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+static void ao_clock_domain_hog_clock(struct platform_device *pdev, int index)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct clk *clk;
+	int ret;
+
+	clk = of_clk_get(np, index);
+	if (IS_ERR(clk)) {
+		dev_warn(&pdev->dev, "Failed get clock %s[%d]: %li\n",
+			 np->full_name, index, PTR_ERR(clk));
+		return;
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		dev_warn(&pdev->dev, "Failed to enable clock: %s\n", clk->name);
+}
+
+static int ao_clock_domain_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int nclks, i;
+
+	nclks = of_count_phandle_with_args(np, "clocks", "#clock-cells");
+
+	for (i = 0; i < nclks; i++)
+		ao_clock_domain_hog_clock(pdev, i);
+
+	return 0;
+}
+
+static const struct of_device_id ao_clock_domain_match[] = {
+	{ .compatible = "always-on-clk-domain" },
+	{ },
+};
+
+static struct platform_driver ao_clock_domain_driver = {
+	.probe = ao_clock_domain_probe,
+	.driver = {
+		.name = "always-on-clk-domain",
+		.of_match_table = ao_clock_domain_match,
+	},
+};
+module_platform_driver(ao_clock_domain_driver);
-- 
1.9.1

  parent reply	other threads:[~2015-02-18 16:15 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-18 16:14 No subject Lee Jones
2015-02-18 16:14 ` [PATCH v2 1/4] ARM: sti: stih407-family: Supply defines for CLOCKGEN A0 Lee Jones
2015-02-18 16:14 ` [PATCH v2 2/4] ARM: sti: stih407-family: Provide Clock Domain information Lee Jones
2015-02-18 16:15 ` Lee Jones [this message]
2015-02-23 10:34   ` [STLinux Kernel] [PATCH v2 3/4] clk: Provide an always-on clock domain framework Peter Griffin
2015-02-23 17:23   ` Mike Turquette
2015-02-24 11:04     ` Lee Jones
2015-02-25 15:24     ` Rob Herring
2015-02-25 15:48       ` Lee Jones
2015-02-25 18:26         ` Mike Turquette
2015-02-25 18:23       ` Mike Turquette
2015-02-18 16:15 ` [PATCH v2 4/4] clk: dt: Introduce always-on clock domain documentation Lee Jones
2015-02-18 16:54   ` Rob Herring
2015-02-18 17:12     ` Lee Jones
2015-02-18 18:50       ` Rob Herring
2015-02-18 21:54         ` Lee Jones
2015-02-18 23:45           ` Rob Herring
2015-02-19 10:05             ` Lee Jones
2015-02-19  9:27           ` Geert Uytterhoeven
2015-02-19  9:42             ` Lee Jones
2015-02-19  9:55               ` Geert Uytterhoeven
2015-02-19 10:11                 ` Lee Jones
2015-02-19 10:18                   ` Geert Uytterhoeven
2015-02-19 10:28                     ` Lee Jones
2015-02-19 10:35                       ` Geert Uytterhoeven
2015-02-19 10:43                         ` Lee Jones
2015-02-19 11:01                           ` Geert Uytterhoeven
2015-02-19 11:13                             ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1424276101-30137-4-git-send-email-lee.jones@linaro.org \
    --to=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).