From mboxrd@z Thu Jan 1 00:00:00 1970 From: wsa@the-dreams.de (Wolfram Sang) Date: Wed, 25 Feb 2015 17:01:55 +0100 Subject: [RFC V2 04/12] i2c: opal: make use of the new infrastructure for quirks In-Reply-To: <1424880126-15047-1-git-send-email-wsa@the-dreams.de> References: <1424880126-15047-1-git-send-email-wsa@the-dreams.de> Message-ID: <1424880126-15047-5-git-send-email-wsa@the-dreams.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Wolfram Sang Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-opal.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/i2c/busses/i2c-opal.c b/drivers/i2c/busses/i2c-opal.c index 16f90b1a750894..b2788ecad5b3cb 100644 --- a/drivers/i2c/busses/i2c-opal.c +++ b/drivers/i2c/busses/i2c-opal.c @@ -104,17 +104,6 @@ static int i2c_opal_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, req.buffer_ra = cpu_to_be64(__pa(msgs[0].buf)); break; case 2: - /* For two messages, we basically support only simple - * smbus transactions of a write plus a read. We might - * want to allow also two writes but we'd have to bounce - * the data into a single buffer. - */ - if ((msgs[0].flags & I2C_M_RD) || !(msgs[1].flags & I2C_M_RD)) - return -EOPNOTSUPP; - if (msgs[0].len > 4) - return -EOPNOTSUPP; - if (msgs[0].addr != msgs[1].addr) - return -EOPNOTSUPP; req.type = OPAL_I2C_SM_READ; req.addr = cpu_to_be16(msgs[0].addr); req.subaddr_sz = msgs[0].len; @@ -210,6 +199,16 @@ static const struct i2c_algorithm i2c_opal_algo = { .functionality = i2c_opal_func, }; +/* For two messages, we basically support only simple + * smbus transactions of a write plus a read. We might + * want to allow also two writes but we'd have to bounce + * the data into a single buffer. + */ +static struct i2c_adapter_quirks i2c_opal_quirks = { + .flags = I2C_AQ_COMB_WRITE_THEN_READ, + .max_comb_1st_msg_len = 4, +}; + static int i2c_opal_probe(struct platform_device *pdev) { struct i2c_adapter *adapter; @@ -232,6 +231,7 @@ static int i2c_opal_probe(struct platform_device *pdev) adapter->algo = &i2c_opal_algo; adapter->algo_data = (void *)(unsigned long)opal_id; + adapter->quirks = &i2c_opal_quirks; adapter->dev.parent = &pdev->dev; adapter->dev.of_node = of_node_get(pdev->dev.of_node); pname = of_get_property(pdev->dev.of_node, "ibm,port-name", NULL); -- 2.1.4