From mboxrd@z Thu Jan 1 00:00:00 1970 From: arnd@arndb.de (Arnd Bergmann) Date: Wed, 4 Mar 2015 20:33:04 +0100 Subject: [RFC PATCH 10/18] gpio: move msm-v1 driver to mach-msm In-Reply-To: <1425497592-1831064-1-git-send-email-arnd@arndb.de> References: <1425497592-1831064-1-git-send-email-arnd@arndb.de> Message-ID: <1425497592-1831064-11-git-send-email-arnd@arndb.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The msm gpio driver uses the gpiomux infrastructure that relies on platform specific internals. We should really use a proper pinmux driver here, but for now, the easiest solution is to move it into mach-msm to get rid of the header file dependency. Signed-off-by: Arnd Bergmann --- arch/arm/mach-msm/Makefile | 2 ++ {drivers/gpio => arch/arm/mach-msm}/gpio-msm-v1.c | 0 drivers/gpio/Kconfig | 8 -------- drivers/gpio/Makefile | 1 - 4 files changed, 2 insertions(+), 9 deletions(-) rename {drivers/gpio => arch/arm/mach-msm}/gpio-msm-v1.c (100%) diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index bab22a179c47..eb0fa4bf7f36 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -7,6 +7,8 @@ obj-$(CONFIG_ARCH_QSD8X50) += sirc.o obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o +obj-$(CONFIG_ARCH_MSM) += gpio-msm-v1.o + obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o obj-$(CONFIG_MSM_SMD) += last_radio_log.o diff --git a/drivers/gpio/gpio-msm-v1.c b/arch/arm/mach-msm/gpio-msm-v1.c similarity index 100% rename from drivers/gpio/gpio-msm-v1.c rename to arch/arm/mach-msm/gpio-msm-v1.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 2ebc124e1217..00c489f31d9d 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -223,14 +223,6 @@ config GPIO_MPC8XXX Say Y here if you're going to use hardware that connects to the MPC512x/831x/834x/837x/8572/8610 GPIOs. -config GPIO_MSM_V1 - tristate "Qualcomm MSM GPIO v1" - depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50) - help - Say yes here to support the GPIO interface on ARM v6 based - Qualcomm MSM chips. Most of the pins on the MSM can be - selected for GPIO, and are controlled by this driver. - config GPIO_MSM_V2 tristate "Qualcomm MSM GPIO v2" depends on GPIOLIB && OF && ARCH_QCOM diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 0e48e5d89d63..b2fb21036655 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -58,7 +58,6 @@ obj-$(CONFIG_GPIO_MOXART) += gpio-moxart.o obj-$(CONFIG_GPIO_MPC5200) += gpio-mpc5200.o obj-$(CONFIG_GPIO_MPC8XXX) += gpio-mpc8xxx.o obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o -obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o -- 2.1.0.rc2