From mboxrd@z Thu Jan 1 00:00:00 1970 From: arnd@arndb.de (Arnd Bergmann) Date: Wed, 4 Mar 2015 20:33:12 +0100 Subject: [RFC PATCH 18/18] ARM: msm: enable multiplatform support In-Reply-To: <1425497592-1831064-1-git-send-email-arnd@arndb.de> References: <1425497592-1831064-1-git-send-email-arnd@arndb.de> Message-ID: <1425497592-1831064-19-git-send-email-arnd@arndb.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org All prerequisites are complete now, so we can finally move msm into multiplatform. This also rearranges the Kconfig file for msm to look more like the other platforms, and we enable all msm boards in the msm_defconfig file. Signed-off-by: Arnd Bergmann --- arch/arm/Kconfig | 14 ------- arch/arm/configs/msm_defconfig | 7 ++++ arch/arm/mach-msm/Kconfig | 91 ++++++++++++++---------------------------- arch/arm/mach-msm/Makefile | 2 + 4 files changed, 40 insertions(+), 74 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ef94bccbe137..8d2a0ba7cb05 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -554,20 +554,6 @@ config ARCH_PXA help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. -config ARCH_MSM - bool "Qualcomm MSM (non-multiplatform)" - select ARCH_REQUIRE_GPIOLIB - select COMMON_CLK - select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - help - Support for Qualcomm MSM/QSD based systems. This runs on the - apps processor of the MSM/QSD and depends on a shared memory - interface to the modem processor which runs the baseband - stack and controls some vital subsystems - (clock and power control, etc). - config ARCH_SHMOBILE_LEGACY bool "Renesas ARM SoCs (non-multiplatform)" select ARCH_SHMOBILE diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig index dd18c9e527d6..6d1e5830e081 100644 --- a/arch/arm/configs/msm_defconfig +++ b/arch/arm/configs/msm_defconfig @@ -17,7 +17,14 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_MULTI_V6=y +CONFIG_ARCH_MULTI_V7=y CONFIG_ARCH_MSM=y +CONFIG_MACH_HALIBUT=y +CONFIG_MACH_TROUT=y +CONFIG_MACH_MSM7X30_SURF=y +CONFIG_MACH_QSD8X50_SURF=y +CONFIG_MACH_QSD8X50A_ST1_5=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_HIGHMEM=y diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index a6b50e62a495..9ae3e59c0fdc 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -1,109 +1,81 @@ -if ARCH_MSM +menuconfig ARCH_MSM + bool "Qualcomm MSM (legacy)" + depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB + select CLKSRC_QCOM + select MSM_PROC_COMM + select MSM_SMD + help + Support for Qualcomm MSM/QSD based systems. This runs on the + apps processor of the MSM/QSD and depends on a shared memory + interface to the modem processor which runs the baseband + stack and controls some vital subsystems + (clock and power control, etc). -choice - prompt "Qualcomm MSM SoC Type" - default ARCH_MSM7X00A - depends on ARCH_MSM +if ARCH_MSM config ARCH_MSM7X00A - bool "MSM7x00A / MSM7x01A" - select ARCH_MSM_ARM11 - select CPU_V6 - select GPIO_MSM_V1 - select MACH_TROUT if !MACH_HALIBUT - select MSM_PROC_COMM - select MSM_SMD - select CLKSRC_QCOM - select MSM_SMD_PKG3 + bool config ARCH_MSM7X30 - bool "MSM7x30" - select ARCH_MSM_SCORPION - select CPU_V7 - select GPIO_MSM_V1 - select MACH_MSM7X30_SURF # if ! + bool select MSM_GPIOMUX - select MSM_PROC_COMM - select MSM_SMD - select CLKSRC_QCOM select MSM_VIC config ARCH_QSD8X50 - bool "QSD8X50" - select ARCH_MSM_SCORPION - select CPU_V7 - select GPIO_MSM_V1 - select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5 + bool select MSM_GPIOMUX - select MSM_PROC_COMM - select MSM_SMD - select CLKSRC_QCOM select MSM_VIC -endchoice - config MSM_SOC_REV_A bool -config ARCH_MSM_ARM11 +config MSM_VIC bool -config ARCH_MSM_SCORPION +config MSM_PROC_COMM bool -config MSM_VIC +config MSM_SMD bool -menu "Qualcomm MSM Board Type" - depends on ARCH_MSM +config MSM_GPIOMUX + bool config MACH_HALIBUT - depends on ARCH_MSM - depends on ARCH_MSM7X00A + depends on ARCH_MULTI_V6 + select ARCH_MSM7X00A bool "Halibut Board (QCT SURF7201A)" help Support for the Qualcomm SURF7201A eval board. config MACH_TROUT - depends on ARCH_MSM - depends on ARCH_MSM7X00A + depends on ARCH_MULTI_V6 + select ARCH_MSM7X00A bool "HTC Dream (aka trout)" help Support for the HTC Dream, T-Mobile G1, Android ADP1 devices. config MACH_MSM7X30_SURF - depends on ARCH_MSM7X30 + depends on ARCH_MULTI_V7 + select ARCH_MSM7X30 bool "MSM7x30 SURF" help Support for the Qualcomm MSM7x30 SURF eval board. config MACH_QSD8X50_SURF - depends on ARCH_QSD8X50 + depends on ARCH_MULTI_V7 + select ARCH_QSD8X50 bool "QSD8x50 SURF" help Support for the Qualcomm QSD8x50 SURF eval board. config MACH_QSD8X50A_ST1_5 - depends on ARCH_QSD8X50 + depends on ARCH_MULTI_V7 + select ARCH_QSD8X50 bool "QSD8x50A ST1.5" select MSM_SOC_REV_A help Support for the Qualcomm ST1.5. -endmenu - -config MSM_SMD_PKG3 - bool - -config MSM_PROC_COMM - bool - -config MSM_SMD - bool - -config MSM_GPIOMUX - bool - help - Support for MSM V1 TLMM GPIOMUX architecture. - endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 59ef46a881ea..d0f74d2d5be4 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,3 +1,5 @@ +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include + obj-$(CONFIG_MSM_PROC_COMM) += clock.o obj-$(CONFIG_MSM_VIC) += irq-vic.o -- 2.1.0.rc2