[PATCH 3/5] dt-bindings: mediatek: Add smi dts binding

[yong.wu@mediatek.com (yong.wu at mediatek.com)]

From: Yong Wu <yong.wu@mediatek.com>

This patch add smi binding document.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 .../devicetree/bindings/soc/mediatek/mediatek,smi.txt   | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt

diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt b/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt
new file mode 100644
index 0000000..0fc9d1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,smi.txt
@@ -0,0 +1,17 @@
+SMI hardware block diagram please help check <bindings/iommu/mediatek,iommu.txt>
+
+Required properties:
+- compatible : must be "mediatek,mediatek,mt8173-smi-larb"
+- reg : the register of each local arbiter
+- clocks : the clocks of each local arbiter
+- clock-name: larb_sub*(3 clockes at most)
+
+Example:
+	larb1:larb at 16010000 {
+	        compatible = "mediatek,mt8173-smi-larb";
+		reg = <0 0x16010000 0 0x1000>;
+		clocks = <&mmsys MM_SMI_COMMON>,
+		        <&vdecsys VDEC_CKEN>,
+                        <&vdecsys VDEC_LARB_CKEN>;
+		clock-names = "larb_sub0", "larb_sub1", "larb_sub2";
+	};
-- 
1.8.1.1.dirty