From: hanjun.guo@linaro.org (Hanjun Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v10 08/21] ARM64 / ACPI: Introduce early_param "acpi=" to enable/disable ACPI
Date: Wed, 11 Mar 2015 20:39:34 +0800 [thread overview]
Message-ID: <1426077587-1561-9-git-send-email-hanjun.guo@linaro.org> (raw)
In-Reply-To: <1426077587-1561-1-git-send-email-hanjun.guo@linaro.org>
From: Al Stone <al.stone@linaro.org>
This implements the following policy to decide whether ACPI should
be used to boot the system:
- acpi=off: ACPI will not be used to boot the system, even if there is
no alternative available (e.g., device tree is empty)
- acpi=force: only ACPI will be used to boot the system; if that fails,
there will be no fallback to alternative methods (such as device tree)
- otherwise, ACPI will be used as a fallback if the device tree turns out
to lack a platform description; the heuristic to decide this is whether
/chosen is the only node present at depth 1
CC: Catalin Marinas <catalin.marinas@arm.com>
CC: Will Deacon <will.deacon@arm.com>
CC: Rafael J. Wysocki <rjw@rjwysocki.net>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Al Stone <al.stone@linaro.org>
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
---
Documentation/kernel-parameters.txt | 3 ++-
arch/arm64/include/asm/acpi.h | 7 +++++
arch/arm64/kernel/acpi.c | 52 +++++++++++++++++++++++++++++++++----
3 files changed, 56 insertions(+), 6 deletions(-)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index bfcb1a6..d6c35a7 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -165,7 +165,7 @@ multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
bytes respectively. Such letter suffixes can also be entirely omitted.
- acpi= [HW,ACPI,X86]
+ acpi= [HW,ACPI,X86,ARM64]
Advanced Configuration and Power Interface
Format: { force | off | strict | noirq | rsdt }
force -- enable ACPI if default was off
@@ -175,6 +175,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
strictly ACPI specification compliant.
rsdt -- prefer RSDT over (default) XSDT
copy_dsdt -- copy DSDT to memory
+ For ARM64, ONLY "acpi=off" or "acpi=force" are available
See also Documentation/power/runtime_pm.txt, pci=noacpi
diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
index 40e0924..c5a9b97 100644
--- a/arch/arm64/include/asm/acpi.h
+++ b/arch/arm64/include/asm/acpi.h
@@ -39,6 +39,13 @@ static inline void disable_acpi(void)
acpi_noirq = 1;
}
+static inline void enable_acpi(void)
+{
+ acpi_disabled = 0;
+ acpi_pci_disabled = 0;
+ acpi_noirq = 0;
+}
+
/*
* It's used from ACPI core in kdump to boot UP system with SMP kernel,
* with this check the ACPI core will not override the CPU index
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index 7abac24..2269e30 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -22,15 +22,49 @@
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/memblock.h>
+#include <linux/of_fdt.h>
#include <linux/smp.h>
-int acpi_noirq; /* skip ACPI IRQ initialization */
-int acpi_disabled;
+int acpi_noirq = 1; /* skip ACPI IRQ initialization */
+int acpi_disabled = 1;
EXPORT_SYMBOL(acpi_disabled);
-int acpi_pci_disabled; /* skip ACPI PCI scan and IRQ initialization */
+int acpi_pci_disabled = 1; /* skip ACPI PCI scan and IRQ initialization */
EXPORT_SYMBOL(acpi_pci_disabled);
+static bool param_acpi_off __initdata;
+static bool param_acpi_force __initdata;
+
+static int __init parse_acpi(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ /* "acpi=off" disables both ACPI table parsing and interpreter */
+ if (strcmp(arg, "off") == 0)
+ param_acpi_off = true;
+ else if (strcmp(arg, "force") == 0) /* force ACPI to be enabled */
+ param_acpi_force = true;
+ else
+ return -EINVAL; /* Core will print when we return error */
+
+ return 0;
+}
+early_param("acpi", parse_acpi);
+
+static int __init dt_scan_depth1_nodes(unsigned long node,
+ const char *uname, int depth,
+ void *data)
+{
+ /*
+ * Return 1 as soon as we encounter a node at depth 1 that is
+ * not the /chosen node.
+ */
+ if (depth == 1 && (strcmp(uname, "chosen") != 0))
+ return 1;
+ return 0;
+}
+
/*
* __acpi_map_table() will be called before page_init(), so early_ioremap()
* or early_memremap() should be called here to for ACPI table mapping.
@@ -83,10 +117,18 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table)
*/
void __init acpi_boot_table_init(void)
{
- /* If acpi_disabled, bail out */
- if (acpi_disabled)
+ /*
+ * Enable ACPI instead of device tree unless
+ * - ACPI has been disabled explicitly (acpi=off), or
+ * - the device tree is not empty (it has more than just a /chosen node)
+ * and ACPI has not been force enabled (acpi=force)
+ */
+ if (param_acpi_off ||
+ (!param_acpi_force && of_scan_flat_dt(dt_scan_depth1_nodes, NULL)))
return;
+ enable_acpi();
+
/* Initialize the ACPI boot-time table parser. */
if (acpi_table_init()) {
disable_acpi();
--
1.9.1
next prev parent reply other threads:[~2015-03-11 12:39 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-11 12:39 [PATCH v10 00/21] Introduce ACPI for ARM64 based on ACPI 5.1 Hanjun Guo
2015-03-11 12:39 ` [PATCH v10 01/21] ACPI / table: Use pr_debug() instead of pr_info() for MADT table scanning Hanjun Guo
2015-03-11 12:39 ` [PATCH v10 02/21] ACPI: add arm64 to the platforms that use ioremap Hanjun Guo
2015-03-11 12:39 ` [PATCH v10 03/21] ARM64: allow late use of early_ioremap Hanjun Guo
2015-03-11 12:39 ` [PATCH v10 04/21] ARM64 / ACPI: Get RSDP and ACPI boot-time tables Hanjun Guo
2015-03-11 12:39 ` [PATCH v10 05/21] ACPI: fix acpi_os_ioremap for arm64 Hanjun Guo
2015-03-11 12:39 ` [PATCH v10 06/21] ACPI / sleep: Introduce CONFIG_ACPI_GENERIC_SLEEP Hanjun Guo
2015-03-12 9:32 ` Lorenzo Pieralisi
2015-03-12 22:57 ` Rafael J. Wysocki
2015-03-13 3:31 ` Hanjun Guo
2015-03-11 12:39 ` [PATCH v10 07/21] ARM64 / ACPI: Introduce PCI stub functions for ACPI Hanjun Guo
2015-03-11 12:39 ` Hanjun Guo [this message]
2015-03-18 11:35 ` [PATCH v10 08/21] ARM64 / ACPI: Introduce early_param "acpi=" to enable/disable ACPI Lorenzo Pieralisi
2015-03-18 20:07 ` Ard Biesheuvel
2015-03-19 2:30 ` Hanjun Guo
2015-03-19 10:04 ` Lorenzo Pieralisi
2015-03-11 12:39 ` [PATCH v10 09/21] ARM64 / ACPI: If we chose to boot from acpi then disable FDT Hanjun Guo
2015-03-18 16:52 ` Catalin Marinas
2015-03-11 12:39 ` [PATCH v10 10/21] ARM64 / ACPI: Get PSCI flags in FADT for PSCI init Hanjun Guo
2015-03-13 14:51 ` Lorenzo Pieralisi
2015-03-16 11:45 ` Hanjun Guo
2015-03-16 18:41 ` Lorenzo Pieralisi
2015-03-11 12:39 ` [PATCH v10 11/21] ACPI / table: Print GIC information when MADT is parsed Hanjun Guo
2015-03-11 12:39 ` [PATCH v10 12/21] ARM64 / ACPI: Parse MADT for SMP initialization Hanjun Guo
2015-03-11 12:39 ` [PATCH v10 13/21] ACPI / processor: Introduce phys_cpuid_t for CPU hardware ID Hanjun Guo
2015-03-12 9:51 ` Lorenzo Pieralisi
2015-03-12 10:16 ` Hanjun Guo
2015-03-11 12:39 ` [PATCH v10 14/21] ACPI / processor: Make it possible to get CPU hardware ID via GICC Hanjun Guo
2015-03-12 15:41 ` Lorenzo Pieralisi
2015-03-12 23:02 ` Rafael J. Wysocki
2015-03-11 12:39 ` [PATCH v10 15/21] ARM64 / ACPI: Introduce ACPI_IRQ_MODEL_GIC and register device's gsi Hanjun Guo
2015-03-18 18:41 ` Will Deacon
2015-03-19 3:45 ` Hanjun Guo
2015-03-19 10:12 ` Lorenzo Pieralisi
2015-03-19 19:37 ` Will Deacon
2015-03-20 13:07 ` Hanjun Guo
2015-03-20 14:25 ` Lorenzo Pieralisi
2015-03-21 21:38 ` Lorenzo Pieralisi
2015-03-11 12:39 ` [PATCH v10 16/21] irqchip: Add GICv2 specific ACPI boot support Hanjun Guo
[not found] ` <CACxGe6uWwts6X=Yc2ioBdQizXkF1_YgoNNOsREWirk2MFBVDHg@mail.gmail.com>
2015-03-11 23:11 ` Jason Cooper
2015-03-12 1:46 ` Hanjun Guo
2015-03-12 5:12 ` Jason Cooper
2015-03-12 7:31 ` Hanjun Guo
2015-03-13 17:15 ` Jason Cooper
2015-03-14 8:47 ` Grant Likely
2015-03-14 11:43 ` Catalin Marinas
2015-03-12 10:14 ` Marc Zyngier
2015-03-14 18:44 ` Jason Cooper
2015-03-11 12:39 ` [PATCH v10 17/21] clocksource / arch_timer: Parse GTDT to initialize arch timer Hanjun Guo
2015-03-18 18:34 ` Will Deacon
2015-03-20 13:49 ` Daniel Lezcano
2015-03-11 12:39 ` [PATCH v10 18/21] ARM64 / ACPI: Select ACPI_REDUCED_HARDWARE_ONLY if ACPI is enabled on ARM64 Hanjun Guo
2015-03-12 18:21 ` Lorenzo Pieralisi
2015-03-13 3:28 ` Hanjun Guo
2015-03-13 11:04 ` Lorenzo Pieralisi
2015-03-16 11:33 ` Hanjun Guo
2015-03-17 12:50 ` Lorenzo Pieralisi
2015-03-18 9:18 ` Lorenzo Pieralisi
2015-03-18 15:06 ` Rafael J. Wysocki
2015-03-19 1:16 ` Hanjun Guo
2015-03-11 12:39 ` [PATCH v10 19/21] ARM64 / ACPI: Enable ARM64 in Kconfig Hanjun Guo
2015-03-11 12:39 ` [PATCH v10 20/21] Documentation: ACPI for ARM64 Hanjun Guo
2015-03-11 12:39 ` [PATCH v10 21/21] ARM64 / ACPI: additions of ACPI documentation for arm64 Hanjun Guo
2015-03-12 13:26 ` [PATCH v10 00/21] Introduce ACPI for ARM64 based on ACPI 5.1 Timur Tabi
2015-03-16 5:07 ` Suthikulpanit, Suravee
2015-03-18 19:05 ` Will Deacon
2015-03-18 19:09 ` Will Deacon
2015-03-19 4:09 ` Hanjun Guo
2015-03-19 10:17 ` Lorenzo Pieralisi
2015-03-19 19:39 ` Will Deacon
2015-03-24 22:02 ` Grant Likely
2015-03-25 11:24 ` Will Deacon
2015-03-25 11:54 ` Rafael J. Wysocki
2015-03-25 11:38 ` Will Deacon
2015-03-25 12:16 ` Rafael J. Wysocki
2015-03-28 12:34 ` Grant Likely
2015-03-26 10:24 ` Lorenzo Pieralisi
2015-03-20 18:54 ` Will Deacon
2015-03-21 3:17 ` Hanjun Guo
2015-03-21 7:03 ` Hanjun Guo
[not found] ` <CAFoFrHatzS3MwGVeOPPjY1R1sfBRYnJjgbQjvfzi6xS+XYD14g@mail.gmail.com>
2015-03-22 21:05 ` Julien Grall
2015-03-22 21:49 ` Rafael J. Wysocki
2015-03-22 21:32 ` Julien Grall
2015-03-22 22:11 ` Rafael J. Wysocki
2015-03-23 1:37 ` Hanjun Guo
2015-03-23 18:39 ` Stefano Stabellini
2015-03-23 18:32 ` Stefano Stabellini
2015-03-24 13:46 ` Hanjun Guo
2015-03-20 13:18 ` Mark Salter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426077587-1561-9-git-send-email-hanjun.guo@linaro.org \
--to=hanjun.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).