From mboxrd@z Thu Jan 1 00:00:00 1970 From: rnayak@codeaurora.org (Rajendra Nayak) Date: Wed, 8 Jul 2015 15:17:16 +0530 Subject: [PATCH 7/9] arm: dts: apq8064: Add thermal zones, tsens and eeprom nodes In-Reply-To: <1436348838-22671-1-git-send-email-rnayak@codeaurora.org> References: <1436348838-22671-1-git-send-email-rnayak@codeaurora.org> Message-ID: <1436348838-22671-8-git-send-email-rnayak@codeaurora.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add thermal zones, tsens and eeprom nodes Signed-off-by: Rajendra Nayak --- arch/arm/boot/dts/qcom-apq8064.dtsi | 108 ++++++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index df2061e..c06e59f 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -76,6 +76,88 @@ }; }; + thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu_alert0: trip at 0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip at 1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu_alert1: trip at 0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit1: trip at 1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + cpu_alert2: trip at 0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit2: trip at 1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cpu-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 10>; + + trips { + cpu_alert3: trip at 0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit3: trip at 1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <1 10 0x304>; @@ -289,11 +371,37 @@ qcom,controller-type = "pmic-arbiter"; }; + qfprom: qfprom at 00700000 { + compatible = "qcom,qfprom"; + reg = <0x00700000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + tsens_calib: calib { + reg = <0x404 0x10>; + }; + tsens_backup: backup_calib { + reg = <0x414 0x10>; + }; + }; + gcc: clock-controller at 900000 { compatible = "qcom,gcc-apq8064"; reg = <0x00900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + tsens: thermal-sensor at 900000 { + compatible = "qcom,msm8960-tsens"; + nvmem-cell = <&tsens_calib>, <&tsens_backup>; + nvmem-cell-names = "calib", "calib_backup"; + qcom,tsens-slopes = <1176 1176 1154 1176 1111 + 1132 1132 1199 1132 1199 1132>; + #thermal-sensor-cells = <1>; + }; }; lcc: clock-controller at 28000000 { -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation