linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: chunfeng.yun@mediatek.com (Chunfeng Yun)
To: linux-arm-kernel@lists.infradead.org
Subject: No subject
Date: Wed, 22 Jul 2015 22:05:40 +0800	[thread overview]
Message-ID: <1437573945-31586-1-git-send-email-chunfeng.yun@mediatek.com> (raw)

>From ac1e8724bfa47494223bad0af450c1a63cd2fe0c Mon Sep 17 00:00:00 2001
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
Date: Wed, 22 Jul 2015 21:15:15 +0800
Subject: [PATCH 0/5] *** SUBJECT HERE ***

The patch supports MediaTek's xHCI controller.

There are some differences from xHCI spec:
1. The interval is specified in 250 * 8ns increments for Interrupt Moderation
Interval(IMODI) of the Interrupter Moderation(IMOD) register, it is 8 times as
much as that defined in xHCI spec.

2. For the value of TD Size in Normal TRB, MTK's xHCI controller defines a
number of packets that remain to be transferred for a TD after processing all
Max packets in all previous TRBs,that means don't include the current TRB's,
but in xHCI spec it includes the current ones.

3. To minimize the scheduling effort for synchronous endpoints in xHC, the MTK
architecture defines some extra SW scheduling parameters for HW. According to
these parameters provided by SW, the xHC can easily decide whether a
synchronous endpoint should be scheduled in a specific uFrame. The extra SW
scheduling parameters are put into reserved DWs in Slot and Endpoint Context.
And a bandwidth scheduler algorithm is added to support such feature.

A usb3.0 phy driver is also added which used by mt65xx SoCs platform, it
supports two usb2.0 ports and one usb3.0 port.

Change in v3:
1. implement generic phy
2. move opperations for IPPC and wakeup from phy driver to xHCI driver
3. seperate quirk functions into a single C file to fix up dependence issue

Chunfeng Yun (5):
  dt-bindings: Add usb3.0 phy binding for MT65xx SoCs
  dt-bindings: Add a binding for Mediatek xHCI host controller
  usb: phy: add usb3.0 phy driver for mt65xx SoCs
  xhci: mediatek: support MTK xHCI host controller
  arm64: dts: mediatek: add xHCI & usb phy for mt8173

 .../devicetree/bindings/phy/phy-mt65xx-u3.txt      |  21 +
 .../devicetree/bindings/usb/mt8173-xhci.txt        |  50 ++
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts        |  15 +
 arch/arm64/boot/dts/mediatek/mt8173.dtsi           |  31 +
 drivers/phy/Kconfig                                |   9 +
 drivers/phy/Makefile                               |   1 +
 drivers/phy/phy-mt65xx-usb3.c                      | 426 +++++++++++
 drivers/usb/host/Kconfig                           |   9 +
 drivers/usb/host/Makefile                          |   4 +
 drivers/usb/host/xhci-mtk-sch.c                    | 436 +++++++++++
 drivers/usb/host/xhci-mtk.c                        | 836 +++++++++++++++++++++
 drivers/usb/host/xhci-mtk.h                        | 135 ++++
 drivers/usb/host/xhci-ring.c                       |  35 +-
 drivers/usb/host/xhci.c                            |  19 +-
 drivers/usb/host/xhci.h                            |   1 +
 15 files changed, 2021 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-mt65xx-u3.txt
 create mode 100644 Documentation/devicetree/bindings/usb/mt8173-xhci.txt
 create mode 100644 drivers/phy/phy-mt65xx-usb3.c
 create mode 100644 drivers/usb/host/xhci-mtk-sch.c
 create mode 100644 drivers/usb/host/xhci-mtk.c
 create mode 100644 drivers/usb/host/xhci-mtk.h

--
1.8.1.1.dirty

In-Reply-To: 

             reply	other threads:[~2015-07-22 14:05 UTC|newest]

Thread overview: 108+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-22 14:05 Chunfeng Yun [this message]
2015-07-22 14:05 ` [PATCH v3 1/5] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs Chunfeng Yun
2015-07-22 14:05 ` [PATCH v3 2/5] dt-bindings: Add a binding for Mediatek xHCI host controller Chunfeng Yun
2015-07-22 14:22   ` Mark Rutland
2015-07-26  3:45     ` chunfeng yun
2015-07-31 13:37       ` Mark Rutland
2015-08-01  3:42         ` chunfeng yun
2015-07-22 14:05 ` [PATCH v3 3/5] usb: phy: add usb3.0 phy driver for mt65xx SoCs Chunfeng Yun
2015-07-22 14:21   ` Felipe Balbi
2015-07-26  2:51     ` chunfeng yun
2015-07-28  5:47       ` Kishon Vijay Abraham I
2015-07-31 12:25         ` chunfeng yun
2015-07-31 14:18           ` Kishon Vijay Abraham I
2015-08-01  2:42             ` chunfeng yun
2015-07-27 13:58   ` Ricky Liang
2015-07-31 12:32     ` chunfeng yun
2015-07-22 14:05 ` [PATCH v3 4/5] xhci: mediatek: support MTK xHCI host controller Chunfeng Yun
2015-07-22 14:05 ` [PATCH v3 5/5] arm64: dts: mediatek: add xHCI & usb phy for mt8173 Chunfeng Yun
2015-07-22 18:11   ` Sergei Shtylyov
2015-07-26  2:41     ` chunfeng yun
2015-07-23  1:18 ` [PATCH v3 0/5] Mediatek xHCI support chunfeng yun
  -- strict thread matches above, loose matches on Subject: below --
2018-07-06 21:16 No subject Santosh Shilimkar
2018-07-06 21:16 ` Santosh Shilimkar
2018-07-06 21:16 ` Santosh Shilimkar
2018-07-06 21:18   ` Santosh Shilimkar
2018-06-23 21:08 David Lechner
2018-05-04 20:06 Bjorn Helgaas
2018-04-20  8:02 Christoph Hellwig
2018-04-16  1:22 Andrew Worsley
2017-11-30 10:25 Mary Cuevas
2017-08-22  1:38 Nicholas Piggin
2017-06-26 13:16 [PATCH] arm64: use readq() instead of readl() to read 64bit entry_point Luc Van Oostenryck
2017-07-03 23:46 ` No subject Khuong Dinh
2017-06-04 11:59 Yury Norov
     [not found] <CAMj-D2DO_CfvD77izsGfggoKP45HSC9aD6auUPAYC9Yeq_aX7w@mail.gmail.com>
2017-05-04 16:44 ` gengdongjiu
2017-01-31  7:58 Andy Gross
2016-12-01 10:00 Ramana Radhakrishnan
2016-11-11  3:38 Chunyan Zhang
2016-09-30 14:37 Maxime Ripard
2016-07-10  9:24 Neil Armstrong
2016-04-22  8:25 Daniel Lezcano
2016-04-22  8:27 ` Daniel Lezcano
2016-04-11  7:51 Paul Walmsley
2015-12-13 21:57 何旦洁
2015-10-27  0:44 xuyiping
     [not found] <E1ZqY3A-0004Mt-KH@feisty.vs19.net>
2015-10-26  3:21 ` Jiada Wang
2015-09-01 14:14 Mika Penttilä
2015-09-01 15:22 ` Fabio Estevam
2015-07-15  9:32 Yuan Yao
2015-05-18 20:00 raghu MG
2015-04-21 10:18 Ard Biesheuvel
2015-02-26 16:56 Jorge Ramirez-Ortiz
2015-02-18 16:14 Lee Jones
2014-10-28 14:13 Mark Rutland
2014-09-22 19:41 Santosh Shilimkar
2014-09-22  7:45 Jingchang Lu
2014-07-09 17:49 Sebastian Andrzej Siewior
2014-05-24  1:21 Loc Ho
2014-05-12 16:40 Santosh Shilimkar
2014-05-12 16:38 Santosh Shilimkar
2014-02-22 15:53 Hans de Goede
2014-01-21  4:09 John Tobias
2014-01-16 16:11 Loc Ho
2014-01-16 16:09 Loc Ho
2014-01-13 10:32 Lothar Waßmann
2014-01-13 10:29 Lothar Waßmann
2013-12-12  7:30 Loc Ho
2013-11-01  7:04 Xiubo Li
2013-09-24  3:13 Rohit Vaswani
2013-09-02 17:01 Drasko DRASKOVIC
2013-08-24  9:29 Haojian Zhuang
2013-07-26 10:05 Haojian Zhuang
2013-06-28  5:49 Wang, Yalin
2013-06-19 10:57 Ben Dooks
2013-04-24 18:07 Viral Mehta
2012-12-29  9:17 steve.zhan
2012-11-11 14:16 Sammy Chan
2012-11-08  8:07 Abhimanyu Kapur
2012-10-14 10:05 Alexey Dobriyan
2012-08-27  6:40 Simon Horman
2012-06-21 18:26 Paul Walmsley
2012-06-06 10:33 Sascha Hauer
2012-05-18 12:27 Sascha Hauer
2012-03-20 18:28 John Szakmeister
2011-12-28 14:01 Shawn Guo
2011-12-02 16:01 Will Deacon
2011-11-28  2:35 Jett.Zhou
2011-09-19  1:45 Saleem Abdulrasool
2011-09-15  2:03 Jongpill Lee
2011-07-21 11:12 Padmavathi Venna
2011-06-27 20:47 John Ogness
2011-06-27 20:47 Jongpill Lee
2011-06-13 17:29 Andre Silva
2011-06-05 18:33 Hector Oron
2011-05-17  9:28 Javier Martin
2011-05-13 19:35 Vadim Bendebury
2011-03-01 14:02 Javier Martin
2011-01-13  9:13 Uwe Kleine-König
2010-12-03  1:08 tarek attia
2010-10-08  6:02 Daein Moon
2010-09-09  3:33 tarek attia
2010-06-24 13:48 Uwe Kleine-König
2010-06-07 17:58 Dave Hylands
2010-05-18 10:38 Marek Szyprowski
2010-04-17 21:43 nelakurthi koteswararao
2010-02-25  9:36 Thomas Weber
2009-09-17  9:37 Marc Kleine-Budde
2009-09-07 14:07 Somshekar ChandrashekarKadam
2009-08-25 10:34 Syed Rafiuddin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1437573945-31586-1-git-send-email-chunfeng.yun@mediatek.com \
    --to=chunfeng.yun@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).