From: grygorii.strashko@ti.com (Grygorii Strashko)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 6/6] irqchip: crossbar: fix set_wake functionality
Date: Fri, 14 Aug 2015 15:20:30 +0300
Message-ID: <1439554830-19502-7-git-send-email-grygorii.strashko@ti.com> (raw)
In-Reply-To: <1439554830-19502-1-git-send-email-grygorii.strashko@ti.com>
The TI crossbar doesn't provides any facility to configure the wakeup
sources, but it implements .irq_set_wake() callback:
.irq_set_wake = irq_chip_set_wake_parent
As result, the irq_chip_set_wake_parent() will try to execute
.irq_set_wake() callback for parent IRQ domain, which is TI OMAP wakeupgen,
but TI OMAP wakeupgen has IRQCHIP_SKIP_SET_WAKE flag set and do not
implement .irq_set_wake() callback. Thus, irq_chip_set_wake_parent() will
fail with -ENOSYS.
In case of TI OMAP DRA7 the issue reproduced with following
configuration:
ARM GIC<-OMAP wakeupgen<-TI CBAR<-GPIO<-GPIO pcf857x<-gpio_key
gpio_key is wakeup source
Failure is reproduced during suspend/resume to RAM:
suspend:
- gpio_keys_suspend
+ enable_irq_wake
+ pcf857x_irq_set_wake
+ omap_gpio_wake_enable
+ TI CBAR irq_chip_set_wake_parent
+ OMAP wakeupgen has no .irq_set_wake() and
-ENOSYS will be returned
resume:
- gpio_keys_resume
+ disable_irq_wake
+ irq_set_irq_wake
+ WARN(1, "Unbalanced IRQ %d wake disable\n", irq);
Hence, fix it by adding IRQCHIP_SKIP_SET_WAKE flag to TI Crossbar and
drop .irq_set_wake() at the same time.
Cc: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
drivers/irqchip/irq-crossbar.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/irqchip/irq-crossbar.c b/drivers/irqchip/irq-crossbar.c
index f5a72cc..c12bb93 100644
--- a/drivers/irqchip/irq-crossbar.c
+++ b/drivers/irqchip/irq-crossbar.c
@@ -68,9 +68,9 @@ static struct irq_chip crossbar_chip = {
.irq_mask = irq_chip_mask_parent,
.irq_unmask = irq_chip_unmask_parent,
.irq_retrigger = irq_chip_retrigger_hierarchy,
- .irq_set_wake = irq_chip_set_wake_parent,
.irq_set_type = irq_chip_set_type_parent,
- .flags = IRQCHIP_MASK_ON_SUSPEND,
+ .flags = IRQCHIP_MASK_ON_SUSPEND |
+ IRQCHIP_SKIP_SET_WAKE,
#ifdef CONFIG_SMP
.irq_set_affinity = irq_chip_set_affinity_parent,
#endif
--
2.5.0
prev parent reply index
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-14 12:20 [PATCH v3 0/6] genirq: irqdomain_hierarchy: fixes Grygorii Strashko
2015-08-14 12:20 ` [PATCH v3 1/6] genirq: fix irq_chip_retrigger_hierarchy Grygorii Strashko
2015-08-17 3:28 ` Jiang Liu
2015-08-14 12:20 ` [PATCH v3 2/6] genirq: introduce irq_chip_set_type_parent() helper Grygorii Strashko
2015-08-14 12:20 ` [PATCH v3 3/6] irqchip: crossbar: fix arm gic irq type configuration Grygorii Strashko
2015-08-14 12:20 ` [PATCH v3 4/6] ARM: OMAP: wakeupgen: " Grygorii Strashko
2015-08-14 12:20 ` [PATCH v3 5/6] irqchip: crossbar: fix irq masking at suspend Grygorii Strashko
2015-08-14 12:20 ` Grygorii Strashko [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1439554830-19502-7-git-send-email-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Linux-ARM-Kernel Archive on lore.kernel.org
Archives are clonable:
git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
linux-arm-kernel@lists.infradead.org
public-inbox-index linux-arm-kernel
Example config snippet for mirrors
Newsgroup available over NNTP:
nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git