From mboxrd@z Thu Jan 1 00:00:00 1970 From: ykk@rock-chips.com (Yakir Yang) Date: Tue, 1 Sep 2015 14:20:18 +0800 Subject: [PATCH v4 16/16] drm: bridge: analogix/dp: add edid modes parse in get_modes method In-Reply-To: <1441086371-24838-1-git-send-email-ykk@rock-chips.com> References: <1441086371-24838-1-git-send-email-ykk@rock-chips.com> Message-ID: <1441088418-25922-1-git-send-email-ykk@rock-chips.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Display Port monitor could support kinds of mode which indicate in monitor edid, not just one single display resolution which defined in panel or devivetree property display timing. Signed-off-by: Yakir Yang --- Changes in v4: - Call drm_panel_prepare() in .get_modes function, ensure panel should power on before driver try to read edid message. Changes in v3: - Add edid modes parse support Changes in v2: None drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 31 ++++++++------- drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 46 +++++++++++----------- 2 files changed, 40 insertions(+), 37 deletions(-) diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c index 499ec57..c71e5f6 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c @@ -111,7 +111,7 @@ static unsigned char analogix_dp_calc_edid_check_sum(unsigned char *edid_data) static int analogix_dp_read_edid(struct analogix_dp_device *dp) { - unsigned char edid[EDID_BLOCK_LENGTH * 2]; + unsigned char *edid = dp->edid; unsigned int extend_block = 0; unsigned char sum; unsigned char test_vector; @@ -908,12 +908,6 @@ static void analogix_dp_commit(struct analogix_dp_device *dp) DRM_ERROR("failed to disable the panel\n"); } - ret = analogix_dp_handle_edid(dp); - if (ret) { - dev_err(dp->dev, "unable to handle edid\n"); - return; - } - ret = analogix_dp_set_link_train(dp, dp->video_info.max_lane_count, dp->video_info.max_link_rate); if (ret) { @@ -972,8 +966,24 @@ static int analogix_dp_get_modes(struct drm_connector *connector) { struct analogix_dp_device *dp = connector_to_dp(connector); struct analogix_dp_plat_data *plat_data = dp->plat_data; + struct edid *edid = (struct edid *)dp->edid; int num_modes = 0; + if (dp->plat_data && dp->plat_data->panel) { + if (drm_panel_prepare(dp->plat_data->panel)) { + DRM_ERROR("failed to setup the panel\n"); + return -EINVAL; + } + } + + if (analogix_dp_handle_edid(dp)) { + dev_err(dp->dev, "unable to handle edid\n"); + return -EINVAL; + } + + drm_mode_connector_update_edid_property(connector, edid); + num_modes += drm_add_edid_modes(connector, edid); + if (plat_data && plat_data->panel) num_modes += drm_panel_get_modes(plat_data->panel); @@ -1055,13 +1065,6 @@ static void analogix_dp_bridge_enable(struct drm_bridge *bridge) if (dp->dpms_mode == DRM_MODE_DPMS_ON) return; - if (dp->plat_data && dp->plat_data->panel) { - if (drm_panel_prepare(dp->plat_data->panel)) { - DRM_ERROR("failed to setup the panel\n"); - return; - } - } - if (dp->plat_data && dp->plat_data->power_on) dp->plat_data->power_on(dp->plat_data); diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h index 6960ab3..5348b1b 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h @@ -20,6 +20,28 @@ #define MAX_CR_LOOP 5 #define MAX_EQ_LOOP 5 +/* I2C EDID Chip ID, Slave Address */ +#define I2C_EDID_DEVICE_ADDR 0x50 +#define I2C_E_EDID_DEVICE_ADDR 0x30 + +#define EDID_BLOCK_LENGTH 0x80 +#define EDID_HEADER_PATTERN 0x00 +#define EDID_EXTENSION_FLAG 0x7e +#define EDID_CHECKSUM 0x7f + +/* DP_MAX_LANE_COUNT */ +#define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1) +#define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f) + +/* DP_LANE_COUNT_SET */ +#define DPCD_LANE_COUNT_SET(x) ((x) & 0x1f) + +/* DP_TRAINING_LANE0_SET */ +#define DPCD_PRE_EMPHASIS_SET(x) (((x) & 0x3) << 3) +#define DPCD_PRE_EMPHASIS_GET(x) (((x) >> 3) & 0x3) +#define DPCD_VOLTAGE_SWING_SET(x) (((x) & 0x3) << 0) +#define DPCD_VOLTAGE_SWING_GET(x) (((x) >> 0) & 0x3) + enum link_rate_type { LINK_RATE_1_62GBPS = DP_LINK_BW_1_62, LINK_RATE_2_70GBPS = DP_LINK_BW_2_7, @@ -161,6 +183,7 @@ struct analogix_dp_device { int dpms_mode; int hpd_gpio; bool need_force_hpd; + unsigned char edid[EDID_BLOCK_LENGTH * 2]; struct analogix_dp_plat_data *plat_data; }; @@ -260,27 +283,4 @@ int analogix_dp_is_video_stream_on(struct analogix_dp_device *dp); void analogix_dp_config_video_slave_mode(struct analogix_dp_device *dp); void analogix_dp_enable_scrambling(struct analogix_dp_device *dp); void analogix_dp_disable_scrambling(struct analogix_dp_device *dp); - -/* I2C EDID Chip ID, Slave Address */ -#define I2C_EDID_DEVICE_ADDR 0x50 -#define I2C_E_EDID_DEVICE_ADDR 0x30 - -#define EDID_BLOCK_LENGTH 0x80 -#define EDID_HEADER_PATTERN 0x00 -#define EDID_EXTENSION_FLAG 0x7e -#define EDID_CHECKSUM 0x7f - -/* DP_MAX_LANE_COUNT */ -#define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1) -#define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f) - -/* DP_LANE_COUNT_SET */ -#define DPCD_LANE_COUNT_SET(x) ((x) & 0x1f) - -/* DP_TRAINING_LANE0_SET */ -#define DPCD_PRE_EMPHASIS_SET(x) (((x) & 0x3) << 3) -#define DPCD_PRE_EMPHASIS_GET(x) (((x) >> 3) & 0x3) -#define DPCD_VOLTAGE_SWING_SET(x) (((x) & 0x3) << 0) -#define DPCD_VOLTAGE_SWING_GET(x) (((x) >> 0) & 0x3) - #endif /* _ANALOGIX_DP_CORE_H */ -- 2.1.2