From: olof@lixom.net (Olof Johansson)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 2/9] ARM: SoC cleanups for v4.5
Date: Wed, 20 Jan 2016 17:14:35 -0800 [thread overview]
Message-ID: <1453338882-31300-3-git-send-email-olof@lixom.net> (raw)
In-Reply-To: <1453338882-31300-1-git-send-email-olof@lixom.net>
A smallish number of general cleanup commits this release cycle. Some
of these are minor tweaks:
- shmobile change of binding for their GIC (using arm,pl390 now)
- ARCH_RENESAS introduction
- Misc other renesas updates
There's also a couple of treewide commits from Masahiro Yamada cleaning up
const/__initconst for SMP operation structs and a switch to using "depends
on" instead of if-constructs on most of the Kconfig platform targets.
----------------------------------------------------------------
The following changes since commit a718ed0e247571cc0d2d34a20e2fb528d4177185:
Merge branch 'next/fixes-non-critical' into HEAD
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/armsoc-cleanup
for you to fetch changes up to 0ef917f4fb8342fe2fd0b195f2d65223faf273a2:
Merge tag 'renesas-gic-cleanup-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup
----------------------------------------------------------------
Arnd Bergmann (5):
ARM: mvebu: remove unused mach/gpio.h
Merge branch 'treewide/cleanup' into next/cleanup
Merge tag 'renesas-cleanup-for-v4.5' of git://git.kernel.org/.../horms/renesas into next/cleanup
Merge tag 'mvebu-cleanup-4.5-1' of git://git.infradead.org/linux-mvebu into next/cleanup
Merge tag 'arm-soc/for-4.5/cleanup' of git://git.infradead.org/linux-mtd into next/cleanup
Geert Uytterhoeven (6):
ARM: shmobile: r7s72100 dtsi: Use "arm,pl390" for GIC
ARM: shmobile: r8a7740 dtsi: Use "arm,pl390" for GIC
ARM: shmobile: emev2 dtsi: Use "arm,pl390" for GIC
ARM: shmobile: r8a7778 dtsi: Use "arm,pl390" for GIC
staging: board: kzm9d: Use "arm,pl390"
staging: board: armadillo800eva: Use "arm,pl390"
Laurent Pinchart (1):
ARM: shmobile: Remove legacy mach/irqs.h
Linus Walleij (1):
ARM/clocksource: use automatic DT probing for ux500 PRCMU
Masahiro Yamada (3):
ARM: hisi: do not export smp_operations structures
ARM: use const and __initconst for smp_operations
ARM: use "depends on" for SoC configs instead of "if" after prompt
Olof Johansson (1):
Merge tag 'renesas-gic-cleanup-for-v4.5' of git://git.kernel.org/.../horms/renesas into next/cleanup
Simon Horman (2):
MAINTAINERS: Remove link to oss.renesas.com which is closed
ARM: shmobile: Introduce ARCH_RENESAS
MAINTAINERS | 1 -
arch/arm/Kconfig | 3 +-
arch/arm/boot/dts/emev2.dtsi | 2 +-
arch/arm/boot/dts/r7s72100.dtsi | 2 +-
arch/arm/boot/dts/r8a7740.dtsi | 2 +-
arch/arm/boot/dts/r8a7778.dtsi | 2 +-
arch/arm/common/mcpm_platsmp.c | 2 +-
arch/arm/configs/multi_v7_defconfig | 2 +-
arch/arm/configs/shmobile_defconfig | 2 +-
arch/arm/include/asm/psci.h | 2 +-
arch/arm/kernel/psci_smp.c | 2 +-
arch/arm/mach-alpine/Kconfig | 3 +-
arch/arm/mach-alpine/platsmp.c | 2 +-
arch/arm/mach-at91/Kconfig | 15 +++++---
arch/arm/mach-axxia/Kconfig | 3 +-
arch/arm/mach-axxia/platsmp.c | 2 +-
arch/arm/mach-bcm/Kconfig | 27 +++++++++-----
arch/arm/mach-bcm/bcm63xx_smp.c | 2 +-
arch/arm/mach-bcm/kona_smp.c | 2 +-
arch/arm/mach-bcm/platsmp-brcmstb.c | 2 +-
arch/arm/mach-berlin/Kconfig | 3 +-
arch/arm/mach-berlin/platsmp.c | 2 +-
arch/arm/mach-cns3xxx/Kconfig | 3 +-
arch/arm/mach-exynos/Kconfig | 3 +-
arch/arm/mach-exynos/common.h | 2 +-
arch/arm/mach-exynos/platsmp.c | 2 +-
arch/arm/mach-highbank/Kconfig | 3 +-
arch/arm/mach-hisi/Kconfig | 12 ++++---
arch/arm/mach-hisi/core.h | 3 --
arch/arm/mach-hisi/platmcpm.c | 2 +-
arch/arm/mach-hisi/platsmp.c | 6 ++--
arch/arm/mach-imx/Kconfig | 6 ++--
arch/arm/mach-imx/common.h | 4 +--
arch/arm/mach-imx/platsmp.c | 4 +--
arch/arm/mach-integrator/Kconfig | 3 +-
arch/arm/mach-keystone/keystone.h | 2 +-
arch/arm/mach-keystone/platsmp.c | 2 +-
arch/arm/mach-mediatek/Kconfig | 3 +-
arch/arm/mach-mediatek/platsmp.c | 4 +--
arch/arm/mach-meson/Kconfig | 3 +-
arch/arm/mach-moxart/Kconfig | 3 +-
arch/arm/mach-mvebu/Kconfig | 24 ++++++++-----
arch/arm/mach-mvebu/armada-370-xp.h | 2 +-
arch/arm/mach-mvebu/include/mach/gpio.h | 1 -
arch/arm/mach-mvebu/platsmp-a9.c | 4 +--
arch/arm/mach-mvebu/platsmp.c | 2 +-
arch/arm/mach-omap2/common.h | 2 +-
arch/arm/mach-omap2/omap-smp.c | 2 +-
arch/arm/mach-picoxcell/Kconfig | 3 +-
arch/arm/mach-prima2/Kconfig | 3 +-
arch/arm/mach-prima2/common.h | 2 +-
arch/arm/mach-prima2/platsmp.c | 2 +-
arch/arm/mach-qcom/Kconfig | 3 +-
arch/arm/mach-qcom/platsmp.c | 6 ++--
arch/arm/mach-realview/core.h | 2 +-
arch/arm/mach-realview/platsmp.c | 2 +-
arch/arm/mach-rockchip/Kconfig | 3 +-
arch/arm/mach-rockchip/platsmp.c | 2 +-
arch/arm/mach-s5pv210/Kconfig | 3 +-
arch/arm/mach-shmobile/Kconfig | 14 +++++---
arch/arm/mach-shmobile/include/mach/irqs.h | 10 ------
arch/arm/mach-shmobile/irqs.h | 15 --------
arch/arm/mach-shmobile/r8a7779.h | 2 +-
arch/arm/mach-shmobile/r8a7790.h | 2 +-
arch/arm/mach-shmobile/r8a7791.h | 2 +-
arch/arm/mach-shmobile/setup-emev2.c | 2 +-
arch/arm/mach-shmobile/setup-r8a7778.c | 1 -
arch/arm/mach-shmobile/sh73a0.h | 2 +-
arch/arm/mach-shmobile/smp-emev2.c | 2 +-
arch/arm/mach-shmobile/smp-r8a7779.c | 2 +-
arch/arm/mach-shmobile/smp-r8a7790.c | 2 +-
arch/arm/mach-shmobile/smp-r8a7791.c | 2 +-
arch/arm/mach-shmobile/smp-sh73a0.c | 2 +-
arch/arm/mach-socfpga/Kconfig | 3 +-
arch/arm/mach-socfpga/platsmp.c | 4 +--
arch/arm/mach-spear/Kconfig | 3 +-
arch/arm/mach-spear/generic.h | 2 +-
arch/arm/mach-spear/platsmp.c | 2 +-
arch/arm/mach-sti/Kconfig | 3 +-
arch/arm/mach-sti/platsmp.c | 2 +-
arch/arm/mach-sti/smp.h | 2 +-
arch/arm/mach-sunxi/Kconfig | 3 +-
arch/arm/mach-sunxi/platsmp.c | 4 +--
arch/arm/mach-tegra/Kconfig | 3 +-
arch/arm/mach-tegra/common.h | 2 +-
arch/arm/mach-tegra/platsmp.c | 2 +-
arch/arm/mach-u300/Kconfig | 4 +--
arch/arm/mach-uniphier/platsmp.c | 2 +-
arch/arm/mach-ux500/Kconfig | 4 +--
arch/arm/mach-ux500/Makefile | 2 +-
arch/arm/mach-ux500/cpu-db8500.c | 2 --
arch/arm/mach-ux500/cpu.c | 1 -
arch/arm/mach-ux500/platsmp.c | 2 +-
arch/arm/mach-ux500/setup.h | 3 --
arch/arm/mach-ux500/timer.c | 48 -------------------------
arch/arm/mach-vexpress/Kconfig | 3 +-
arch/arm/mach-vexpress/core.h | 2 +-
arch/arm/mach-vexpress/platsmp.c | 2 +-
arch/arm/mach-zx/Kconfig | 3 +-
arch/arm/mach-zx/platsmp.c | 2 +-
arch/arm/mach-zynq/Kconfig | 3 +-
arch/arm/mach-zynq/common.h | 2 +-
arch/arm/mach-zynq/platsmp.c | 2 +-
drivers/clocksource/clksrc-dbx500-prcmu.c | 9 +++--
drivers/staging/board/armadillo800eva.c | 2 +-
drivers/staging/board/kzm9d.c | 2 +-
include/linux/clksrc-dbx500-prcmu.h | 20 -----------
107 files changed, 196 insertions(+), 242 deletions(-)
delete mode 100644 arch/arm/mach-mvebu/include/mach/gpio.h
delete mode 100644 arch/arm/mach-shmobile/include/mach/irqs.h
delete mode 100644 arch/arm/mach-shmobile/irqs.h
delete mode 100644 arch/arm/mach-ux500/timer.c
delete mode 100644 include/linux/clksrc-dbx500-prcmu.h
next prev parent reply other threads:[~2016-01-21 1:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-21 1:14 [GIT PULL 0/9] ARM: SoC updates for v4.5 Olof Johansson
2016-01-21 1:14 ` [GIT PULL 1/9] ARM: SoC non-urgent fixes " Olof Johansson
2016-01-21 1:14 ` Olof Johansson [this message]
2016-01-21 1:14 ` [GIT PULL 3/9] ARM: SoC multiplatform code changes " Olof Johansson
2016-01-21 1:14 ` [GIT PULL 4/9] ARM: SoC platform updates " Olof Johansson
2016-01-21 1:14 ` [GIT PULL 5/9] ARM: DT " Olof Johansson
2016-01-21 1:14 ` [GIT PULL 6/9] ARM: 64-bit " Olof Johansson
2016-01-21 1:14 ` [GIT PULL 7/9] ARM: SoC defconfig " Olof Johansson
2016-01-21 1:14 ` [GIT PULL 8/9] ARM: 64-bit " Olof Johansson
2016-01-21 1:14 ` [GIT PULL 9/9] ARM: SoC driver " Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453338882-31300-3-git-send-email-olof@lixom.net \
--to=olof@lixom.net \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).