From mboxrd@z Thu Jan 1 00:00:00 1970 From: fcooper@ti.com (Franklin S Cooper Jr) Date: Tue, 3 May 2016 10:56:50 -0500 Subject: [PATCH v8 4/9] pwm: pwm-tiecap: Update dt binding document to use proper unit address In-Reply-To: <1462291015-1919-1-git-send-email-fcooper@ti.com> References: <1462291015-1919-1-git-send-email-fcooper@ti.com> Message-ID: <1462291015-1919-5-git-send-email-fcooper@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Replace unit address from 0 to the proper physical address. Also insure that the unit address matches the reg property address. Signed-off-by: Franklin S Cooper Jr --- Documentation/devicetree/bindings/pwm/pwm-tiecap.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt index 788da6c..0d47354 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt @@ -16,22 +16,22 @@ Optional properties: Example: -ecap0: ecap at 0 { /* ECAP on am33xx */ +ecap0: ecap at 48300100 { /* ECAP on am33xx */ compatible = "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48300100 0x80>; ti,hwmods = "ecap0"; }; -ecap0: ecap at 0 { /* ECAP on am4372 */ +ecap0: ecap at 48300100 { /* ECAP on am4372 */ compatible = "ti,am4372-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48300100 0x80>; ti,hwmods = "ecap0"; }; -ecap0: ecap at 0 { /* ECAP on da850 */ +ecap0: ecap at 1f06000 { /* ECAP on da850 */ compatible = "ti,da850-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; - reg = <0x306000 0x80>; + reg = <0x1f06000 0x80>; }; -- 2.7.0