From: vw@iommu.org (Wan Zongshun)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/6] ARM: dts: nuc900: Add nuc970 dts files
Date: Sat, 25 Jun 2016 18:37:18 +0800 [thread overview]
Message-ID: <1466851042-22239-3-git-send-email-vw@iommu.org> (raw)
In-Reply-To: <1466851042-22239-1-git-send-email-vw@iommu.org>
This patch is to add dts support for nuc970 platform.
Signed-off-by: Wan Zongshun <mcuos.com@gmail.com>
---
.../devicetree/bindings/arm/nuvoton/nuc970.txt | 30 +++
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/nuc970-evb.dts | 20 ++
arch/arm/boot/dts/nuc970.dtsi | 93 ++++++++
include/dt-bindings/clock/nuc970-clock.h | 233 +++++++++++++++++++++
5 files changed, 377 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt
create mode 100644 arch/arm/boot/dts/nuc970-evb.dts
create mode 100644 arch/arm/boot/dts/nuc970.dtsi
create mode 100644 include/dt-bindings/clock/nuc970-clock.h
diff --git a/Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt b/Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt
new file mode 100644
index 0000000..df8637a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/nuvoton/nuc970.txt
@@ -0,0 +1,30 @@
+Nuvoton NUC970 SoC platform Device Tree Bindings
+------------------------------------------
+
+Boards with the NUC970 SoC shall have the following properties:
+
+Root node required properties:
+- compatible: Should be "nuvoton,nuc970evb", "nuvoton,nuc970"
+
+Timer required properties:
+- compatible: Should be "nuvoton,tmr"
+- reg: Should contain registers location and length
+- interrupts: hwirq is direct mapping to irq number
+- clocks: phandle to input clock.
+
+Clock required properties:
+- compatible: Should be "nuvoton,clk"
+- reg: Should contain registers location and length
+
+Interrupt-controller required properties
+- compatible: Should be "nuvoton,aic"
+- reg: Should contain registers location and length
+- interrupt-cells: set to 1
+
+GCR register required properties:
+- compatible: Should be "nuvoton,gcr"
+- reg: Should contain registers location and length
+
+Uart required properties:
+- compatible: Should be "nuvoton,nuc970-uart"
+- reg: Should contain registers location and length
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 06b6c2d..c2e2a53 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -891,6 +891,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += aspeed-bmc-opp-palmetto.dtb \
aspeed-ast2500-evb.dtb
+dtb-$(CONFIG_SOC_NUC970) += nuc970-evb.dtb
endif
dtstree := $(srctree)/$(src)
diff --git a/arch/arm/boot/dts/nuc970-evb.dts b/arch/arm/boot/dts/nuc970-evb.dts
new file mode 100644
index 0000000..bd56ad1
--- /dev/null
+++ b/arch/arm/boot/dts/nuc970-evb.dts
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2016 Wan Zongshun <mcuos.com@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "nuc970.dtsi"
+
+/ {
+ model = "NUC970 EVB Board";
+ compatible = "nuvoton,nuc970evb", "nuvoton,nuc970";
+
+};
+
diff --git a/arch/arm/boot/dts/nuc970.dtsi b/arch/arm/boot/dts/nuc970.dtsi
new file mode 100644
index 0000000..8a6c225
--- /dev/null
+++ b/arch/arm/boot/dts/nuc970.dtsi
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2016 Wan Zongshun <mcuos.com@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/nuc970-clock.h>
+
+/ {
+ compatible = "nuvoton,nuc970evb", "nuvoton,nuc970";
+
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ memory {
+ reg = <0x00000000 0x04000000>;
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ };
+ };
+
+ ahb at B0000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xB0000000 0x9000>;
+ ranges;
+
+ gcr: gcr at B0000000 {
+ compatible = "nuvoton,gcr";
+ reg = <0xB0000000 0x200>;
+ };
+
+ clks: clk at B0000200 {
+ compatible = "nuvoton,clk";
+ reg = <0xB0000200 0x200>;
+ #clock-cells = <1>;
+ };
+
+ };
+
+ apb at B8000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xB8000000 0xF000>;
+ ranges;
+
+ aic: interrupt-controller at B8002000 {
+ compatible = "nuvoton,aic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xB8002000 0x1000>;
+ };
+
+
+ tmr at 0xB8001000 {
+ compatible = "nuvoton,tmr";
+ reg = <0xB8001000 0x1000>;
+ interrupts = <16>;
+ clocks = <&clks TIMER0_GATE>,
+ <&clks TIMER1_GATE>;
+ clock-names = "timer0", "timer1";
+
+ };
+
+ uart0: serial at B8000000 {
+ compatible = "nuvoton,nuc970-uart";
+ reg = <0xB8000000 0x1000>;
+ interrupts = <36>;
+ clocks = <&clks UART0_GATE>,
+ <&clks UART0_ECLK_GATE>;
+ clock-names = "uart0", "uart0_eclk";
+ clock-frequency = <12000000>;
+ };
+ };
+};
diff --git a/include/dt-bindings/clock/nuc970-clock.h b/include/dt-bindings/clock/nuc970-clock.h
new file mode 100644
index 0000000..cbfcc77
--- /dev/null
+++ b/include/dt-bindings/clock/nuc970-clock.h
@@ -0,0 +1,233 @@
+/*
+ * Copyright 2016 Wan Zongshun <mcuos.com@gmail.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_NUC970_H
+#define __DT_BINDINGS_CLOCK_NUC970_H
+
+/*SOURCE*/
+
+#define XIN 0
+#define APLL 1
+#define UPLL 2
+#define XIN32K 3
+#define XIN128_DIV 4
+
+/*ECLK*/
+
+#define USB_APLLDIV 5
+#define USB_UPLLDIV 6
+#define USB_ECLK_MUX 7
+#define USB_ECLK_DIV 8
+#define USB_ECLK_GATE 9
+#define SD_APLLDIV 10
+#define SD_UPLLDIV 11
+#define SD_ECLK_MUX 12
+#define SD_ECLK_DIV 13
+#define SD_ECLK_GATE 14
+#define LCD_APLLDIV 15
+#define LCD_UPLLDIV 16
+#define LCD_ECLK_MUX 17
+#define LCD_ECLK_DIV 18
+#define LCD_ECLK_GATE 19
+#define ADC_APLLDIV 20
+#define ADC_UPLLDIV 21
+#define ADC_ECLK_MUX 22
+#define ADC_ECLK_DIV 23
+#define ADC_ECLK_GATE 24
+#define AUDIO_APLLDIV 25
+#define AUDIO_UPLLDIV 26
+#define AUDIO_ECLK_MUX 27
+#define AUDIO_ECLK_DIV 28
+#define AUDIO_ECLK_GATE 29
+#define CAP_APLLDIV 30
+#define CAP_UPLLDIV 31
+#define CAP_ECLK_MUX 32
+#define CAP_ECLK_DIV 33
+#define CAP_ECLK_GATE 34
+#define SDH_APLLDIV 35
+#define SDH_UPLLDIV 36
+#define SDH_ECLK_MUX 37
+#define SDH_ECLK_DIV 38
+#define SDH_ECLK_GATE 39
+#define EMMC_APLLDIV 40
+#define EMMC_UPLLDIV 41
+#define EMMC_ECLK_MUX 42
+#define EMMC_ECLK_DIV 43
+#define EMMC_ECLK_GATE 44
+#define UART0_APLLDIV 45
+#define UART0_UPLLDIV 46
+#define UART0_ECLK_MUX 47
+#define UART0_ECLK_DIV 48
+#define UART0_ECLK_GATE 49
+#define UART1_APLLDIV 50
+#define UART1_UPLLDIV 51
+#define UART1_ECLK_MUX 52
+#define UART1_ECLK_DIV 53
+#define UART1_ECLK_GATE 54
+#define UART2_APLLDIV 55
+#define UART2_UPLLDIV 56
+#define UART2_ECLK_MUX 57
+#define UART2_ECLK_DIV 58
+#define UART2_ECLK_GATE 59
+#define UART3_APLLDIV 60
+#define UART3_UPLLDIV 61
+#define UART3_ECLK_MUX 62
+#define UART3_ECLK_DIV 63
+#define UART3_ECLK_GATE 64
+#define UART4_APLLDIV 65
+#define UART4_UPLLDIV 66
+#define UART4_ECLK_MUX 67
+#define UART4_ECLK_DIV 68
+#define UART4_ECLK_GATE 69
+#define UART5_APLLDIV 70
+#define UART5_UPLLDIV 71
+#define UART5_ECLK_MUX 72
+#define UART5_ECLK_DIV 73
+#define UART5_ECLK_GATE 74
+#define UART6_APLLDIV 75
+#define UART6_UPLLDIV 76
+#define UART6_ECLK_MUX 77
+#define UART6_ECLK_DIV 78
+#define UART6_ECLK_GATE 79
+#define UART7_APLLDIV 80
+#define UART7_UPLLDIV 81
+#define UART7_ECLK_MUX 82
+#define UART7_ECLK_DIV 83
+#define UART7_ECLK_GATE 84
+#define UART8_APLLDIV 85
+#define UART8_UPLLDIV 86
+#define UART8_ECLK_MUX 87
+#define UART8_ECLK_DIV 88
+#define UART8_ECLK_GATE 89
+#define UART9_APLLDIV 90
+#define UART9_UPLLDIV 91
+#define UART9_ECLK_MUX 92
+#define UART9_ECLK_DIV 93
+#define UART9_ECLK_GATE 94
+#define UART10_APLLDIV 95
+#define UART10_UPLLDIV 96
+#define UART10_ECLK_MUX 97
+#define UART10_ECLK_DIV 98
+#define UART10_ECLK_GATE 99
+#define SYSTEM_APLLDIV 100
+#define SYSTEM_UPLLDIV 101
+#define SYSTEM_ECLK_MUX 102
+#define SYSTEM_ECLK_DIV 103
+#define SYSTEM_ECLK_GATE 104
+#define GPIO_ECLK_MUX 105
+#define GPIO_ECLK_DIV 106
+#define GPIO_ECLK_GATE 107
+#define KPI_ECLK_MUX 108
+#define KPI_ECLK_DIV 109
+#define KPI_ECLK_GATE 110
+#define ETIMER0_ECLK_MUX 111
+#define ETIMER0_ECLK_GATE 12
+#define ETIMER1_ECLK_MUX 113
+#define ETIMER1_ECLK_GATE 114
+#define ETIMER2_ECLK_MUX 115
+#define ETIMER2_ECLK_GATE 116
+#define ETIMER3_ECLK_MUX 117
+#define ETIMER3_ECLK_GATE 118
+#define WWDT_ECLK_MUX 119
+#define WWDT_ECLK_GATE 120
+#define WDT_ECLK_MUX 121
+#define WDT_ECLK_GATE 122
+#define SMC0_ECLK_DIV 123
+#define SMC0_ECLK_GATE 124
+#define SMC0_GATE 125
+#define SMC1_ECLK_DIV 126
+#define SMC1_ECLK_GATE 127
+#define SMC1_GATE 128
+
+/*SYS*/
+
+#define SYS_MUX 129
+#define SYS_DIV 130
+#define CPU_DIV 131
+#define CPU_GATE 132
+#define DDR_GATE 133
+
+/*HCLK*/
+
+#define HCLK_GATE 134
+#define HCLK1_DIV 135
+#define GDMA_GATE 136
+#define EBI_GATE 137
+#define TIC_GATE 138
+#define SRAM_GATE 139
+#define HCLKN_DIV 140
+#define DRAM_GATE 141
+#define HCLK234_DIV 142
+#define USBH_GATE 143
+#define EMAC1_GATE 144
+#define EMAC1_ECLK_DIV 145
+#define EMAC1_ECLK_GATE 146
+#define USBD_GATE 147
+#define FMI_GATE 148
+#define NAND_GATE 149
+#define EMMC_GATE 150
+#define CRYPTO_GATE 151
+#define JPEG_GATE 152
+#define JPEG_ECLK_DIV 153
+#define JPEG_ECLK_GATE 154
+#define GE2D_GATE 155
+#define GE2D_ECLK_DIV 156
+#define GE2D_ECLK_GATE 157
+#define EMAC0_GATE 158
+#define EMAC0_ECLK_DIV 159
+#define EMAC0_ECLK_GATE 160
+#define SDH_GATE 161
+#define AUDIO_GATE 162
+#define LCD_GATE 163
+#define CAP_GATE 164
+#define SENSOR_GATE 165
+
+/*PCLK*/
+
+#define PCLK_DIV 166
+#define PCLK4096_DIV 167
+#define I2C0_GATE 168
+#define I2C1_GATE 169
+#define SPI0_GATE 170
+#define SPI1_GATE 171
+#define UART0_GATE 172
+#define UART1_GATE 173
+#define UART2_GATE 174
+#define UART3_GATE 175
+#define UART4_GATE 176
+#define UART5_GATE 177
+#define UART6_GATE 178
+#define UART7_GATE 179
+#define UART8_GATE 180
+#define UART9_GATE 181
+#define UART10_GATE 182
+#define TIMER0_GATE 183
+#define TIMER1_GATE 184
+#define TIMER2_GATE 185
+#define TIMER3_GATE 186
+#define TIMER4_GATE 187
+#define WDT_GATE 188
+#define RTC_GATE 189
+#define WWDT_GATE 190
+#define GPIO_GATE 191
+#define ADC_GATE 192
+#define KPI_GATE 193
+#define MTPC_GATE 194
+#define PWM_GATE 195
+#define ETIMER0_GATE 196
+#define ETIMER1_GATE 197
+#define ETIMER2_GATE 198
+#define ETIMER3_GATE 199
+#define CAN0_GATE 200
+#define CAN1_GATE 201
+#define NUC970_CLK_MAX 202
+
+#endif
--
2.7.4
next prev parent reply other threads:[~2016-06-25 10:37 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-25 10:37 [PATCH 0/6] ARM: NUC900: Add NUC970 SoC support Wan Zongshun
2016-06-25 10:37 ` [PATCH 1/6] ARM: NUC900: Add nuc970 machine support Wan Zongshun
2016-06-29 15:19 ` Arnd Bergmann
2016-07-05 7:38 ` Wan Zongshun
2016-07-05 8:09 ` Arnd Bergmann
2016-06-25 10:37 ` Wan Zongshun [this message]
2016-06-28 20:56 ` [PATCH 2/6] ARM: dts: nuc900: Add nuc970 dts files Rob Herring
2016-06-29 15:24 ` Arnd Bergmann
2016-06-25 10:37 ` [PATCH 3/6] Clocksource: add nuc970 clocksource driver Wan Zongshun
2016-06-27 19:46 ` Daniel Lezcano
2016-07-05 8:21 ` Wan Zongshun
2016-07-05 10:03 ` Daniel Lezcano
2016-06-29 15:25 ` Arnd Bergmann
2016-06-29 16:10 ` Daniel Lezcano
2016-07-05 7:43 ` Wan Zongshun
2016-06-25 10:37 ` [PATCH 4/6] irqchip: add irqchip driver for nuc900 Wan Zongshun
2016-06-29 15:27 ` Arnd Bergmann
2016-07-05 7:47 ` Wan Zongshun
2016-07-05 8:09 ` Arnd Bergmann
2016-07-09 3:25 ` Wan Zongshun
2016-07-09 20:17 ` Arnd Bergmann
2016-07-22 2:37 ` Wan ZongShun
2016-06-30 16:30 ` Jason Cooper
2016-06-25 10:37 ` [PATCH 5/6] clk: add Clock driver for nuc970 Wan Zongshun
2016-06-29 15:28 ` Arnd Bergmann
2016-06-25 10:37 ` [PATCH 6/6] nuc900: add nuc970 platform defconfig file Wan Zongshun
2016-06-29 15:29 ` Arnd Bergmann
2016-06-29 15:32 ` [PATCH 0/6] ARM: NUC900: Add NUC970 SoC support Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1466851042-22239-3-git-send-email-vw@iommu.org \
--to=vw@iommu.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).