[PATCH v5 01/25] staging: media: imx7-mipi-csis: use pm_runtime_resume_and_get()

[PATCH v5 01/25] staging: media: imx7-mipi-csis: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/imx/imx7-mipi-csis.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/imx/imx7-mipi-csis.c b/drivers/staging/media/imx/imx7-mipi-csis.c
index 025fdc488bd6..1dc680d94a46 100644
--- a/drivers/staging/media/imx/imx7-mipi-csis.c
+++ b/drivers/staging/media/imx/imx7-mipi-csis.c
@@ -695,11 +695,10 @@ static int mipi_csis_s_stream(struct v4l2_subdev *mipi_sd, int enable)
 
 		mipi_csis_clear_counters(state);
 
-		ret = pm_runtime_get_sync(&state->pdev->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(&state->pdev->dev);
+		ret = pm_runtime_resume_and_get(&state->pdev->dev);
+		if (ret < 0)
 			return ret;
-		}
+
 		ret = v4l2_subdev_call(state->src_sd, core, s_power, 1);
 		if (ret < 0 && ret != -ENOIOCTLCMD)
 			goto done;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 04/25] staging: media: cedrus_video: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/staging/media/sunxi/cedrus/cedrus_video.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus_video.c b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
index b62eb8e84057..9ddd789d0b1f 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus_video.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus_video.c
@@ -490,11 +490,9 @@ static int cedrus_start_streaming(struct vb2_queue *vq, unsigned int count)
 	}
 
 	if (V4L2_TYPE_IS_OUTPUT(vq->type)) {
-		ret = pm_runtime_get_sync(dev->dev);
-		if (ret < 0) {
-			pm_runtime_put_noidle(dev->dev);
+		ret = pm_runtime_resume_and_get(dev->dev);
+		if (ret < 0)
 			goto err_cleanup;
-		}
 
 		if (dev->dec_ops[ctx->current_codec]->start) {
 			ret = dev->dec_ops[ctx->current_codec]->start(ctx);
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 07/25] media: rockchip/rga: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/rockchip/rga/rga-buf.c | 3 +--
 drivers/media/platform/rockchip/rga/rga.c     | 4 +++-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/rockchip/rga/rga-buf.c b/drivers/media/platform/rockchip/rga/rga-buf.c
index bf9a75b75083..81508ed5abf3 100644
--- a/drivers/media/platform/rockchip/rga/rga-buf.c
+++ b/drivers/media/platform/rockchip/rga/rga-buf.c
@@ -79,9 +79,8 @@ static int rga_buf_start_streaming(struct vb2_queue *q, unsigned int count)
 	struct rockchip_rga *rga = ctx->rga;
 	int ret;
 
-	ret = pm_runtime_get_sync(rga->dev);
+	ret = pm_runtime_resume_and_get(rga->dev);
 	if (ret < 0) {
-		pm_runtime_put_noidle(rga->dev);
 		rga_buf_return_buffers(q, VB2_BUF_STATE_QUEUED);
 		return ret;
 	}
diff --git a/drivers/media/platform/rockchip/rga/rga.c b/drivers/media/platform/rockchip/rga/rga.c
index 9d122429706e..bf3fd71ec3af 100644
--- a/drivers/media/platform/rockchip/rga/rga.c
+++ b/drivers/media/platform/rockchip/rga/rga.c
@@ -866,7 +866,9 @@ static int rga_probe(struct platform_device *pdev)
 		goto unreg_video_dev;
 	}
 
-	pm_runtime_get_sync(rga->dev);
+	ret = pm_runtime_resume_and_get(rga->dev);
+	if (ret < 0)
+		goto unreg_video_dev;
 
 	rga->version.major = (rga_read(rga, RGA_VERSION_INFO) >> 24) & 0xFF;
 	rga->version.minor = (rga_read(rga, RGA_VERSION_INFO) >> 20) & 0x0F;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 07/25] media: rockchip/rga: use pm_runtime_resume_and_get()

[Heiko Stuebner]

Am Donnerstag, 6. Mai 2021, 17:25:45 CEST schrieb Mauro Carvalho Chehab:
> Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
> added pm_runtime_resume_and_get() in order to automatically handle
> dev->power.usage_count decrement on errors.
> 
> Use the new API, in order to cleanup the error check logic.
> 
> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  drivers/media/platform/rockchip/rga/rga-buf.c | 3 +--
>  drivers/media/platform/rockchip/rga/rga.c     | 4 +++-
>  2 files changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/media/platform/rockchip/rga/rga-buf.c b/drivers/media/platform/rockchip/rga/rga-buf.c
> index bf9a75b75083..81508ed5abf3 100644
> --- a/drivers/media/platform/rockchip/rga/rga-buf.c
> +++ b/drivers/media/platform/rockchip/rga/rga-buf.c
> @@ -79,9 +79,8 @@ static int rga_buf_start_streaming(struct vb2_queue *q, unsigned int count)
>  	struct rockchip_rga *rga = ctx->rga;
>  	int ret;
>  
> -	ret = pm_runtime_get_sync(rga->dev);
> +	ret = pm_runtime_resume_and_get(rga->dev);
>  	if (ret < 0) {
> -		pm_runtime_put_noidle(rga->dev);
>  		rga_buf_return_buffers(q, VB2_BUF_STATE_QUEUED);
>  		return ret;
>  	}

looks ok

> diff --git a/drivers/media/platform/rockchip/rga/rga.c b/drivers/media/platform/rockchip/rga/rga.c
> index 9d122429706e..bf3fd71ec3af 100644
> --- a/drivers/media/platform/rockchip/rga/rga.c
> +++ b/drivers/media/platform/rockchip/rga/rga.c
> @@ -866,7 +866,9 @@ static int rga_probe(struct platform_device *pdev)
>  		goto unreg_video_dev;
>  	}
>  
> -	pm_runtime_get_sync(rga->dev);
> +	ret = pm_runtime_resume_and_get(rga->dev);
> +	if (ret < 0)
> +		goto unreg_video_dev;
>  
>  	rga->version.major = (rga_read(rga, RGA_VERSION_INFO) >> 24) & 0xFF;
>  	rga->version.minor = (rga_read(rga, RGA_VERSION_INFO) >> 20) & 0x0F;

hmm, the whole error handling in rga_probe looks fishy to my untrained eyes.

But I guess the easiest will be to apply your patch first and then
investigate and clean up the non-matching alloc - releae calls, so

Reviewed-by: Heiko Stuebner <heiko@sntech.de>




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 11/25] media: mtk-jpeg: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
index 88a23bce569d..a89c7b206eef 100644
--- a/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
+++ b/drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c
@@ -920,7 +920,7 @@ static void mtk_jpeg_enc_device_run(void *priv)
 	src_buf = v4l2_m2m_next_src_buf(ctx->fh.m2m_ctx);
 	dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
 
-	ret = pm_runtime_get_sync(jpeg->dev);
+	ret = pm_runtime_resume_and_get(jpeg->dev);
 	if (ret < 0)
 		goto enc_end;
 
@@ -973,7 +973,7 @@ static void mtk_jpeg_dec_device_run(void *priv)
 		return;
 	}
 
-	ret = pm_runtime_get_sync(jpeg->dev);
+	ret = pm_runtime_resume_and_get(jpeg->dev);
 	if (ret < 0)
 		goto dec_end;
 
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 17/25] media: rkisp1: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
index 5f6c9d1623e4..3730376897d9 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-capture.c
@@ -1003,9 +1003,8 @@ rkisp1_vb2_start_streaming(struct vb2_queue *queue, unsigned int count)
 	if (ret)
 		goto err_pipeline_stop;
 
-	ret = pm_runtime_get_sync(cap->rkisp1->dev);
+	ret = pm_runtime_resume_and_get(cap->rkisp1->dev);
 	if (ret < 0) {
-		pm_runtime_put_noidle(cap->rkisp1->dev);
 		dev_err(cap->rkisp1->dev, "power up failed %d\n", ret);
 		goto err_destroy_dummy;
 	}
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 17/25] media: rkisp1: use pm_runtime_resume_and_get()

[Heiko Stuebner]

Am Donnerstag, 6. Mai 2021, 17:25:55 CEST schrieb Mauro Carvalho Chehab:
> Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
> added pm_runtime_resume_and_get() in order to automatically handle
> dev->power.usage_count decrement on errors.
> 
> Use the new API, in order to cleanup the error check logic.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Reviewed-by: Heiko Stuebner <heiko@sntech.de>



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 19/25] media: s5p-mfc: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/s5p-mfc/s5p_mfc_pm.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
index 62d2320a7218..88b7d33c9197 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_pm.c
@@ -78,11 +78,9 @@ int s5p_mfc_power_on(void)
 {
 	int i, ret = 0;
 
-	ret = pm_runtime_get_sync(pm->device);
-	if (ret < 0) {
-		pm_runtime_put_noidle(pm->device);
+	ret = pm_runtime_resume_and_get(pm->device);
+	if (ret < 0)
 		return ret;
-	}
 
 	/* clock control */
 	for (i = 0; i < pm->num_clocks; i++) {
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 20/25] media: stm32: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/stm32/stm32-dcmi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index d9b4ad0abf0c..b33c6e7ae0a1 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -723,11 +723,11 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 	u32 val = 0;
 	int ret;
 
-	ret = pm_runtime_get_sync(dcmi->dev);
+	ret = pm_runtime_resume_and_get(dcmi->dev);
 	if (ret < 0) {
 		dev_err(dcmi->dev, "%s: Failed to start streaming, cannot get sync (%d)\n",
 			__func__, ret);
-		goto err_pm_put;
+		goto err_unlocked;
 	}
 
 	ret = media_pipeline_start(&dcmi->vdev->entity, &dcmi->pipeline);
@@ -848,6 +848,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
 
 err_pm_put:
 	pm_runtime_put(dcmi->dev);
+err_unlocked:
 	spin_lock_irq(&dcmi->irqlock);
 	/*
 	 * Return all buffers to vb2 in QUEUED state.
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 21/25] media: sunxi: use pm_runtime_resume_and_get()

[Mauro Carvalho Chehab]

Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c b/drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c
index 4785faddf630..54b909987caa 100644
--- a/drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c
+++ b/drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c
@@ -206,9 +206,9 @@ static int sun4i_csi_open(struct file *file)
 	if (ret)
 		return ret;
 
-	ret = pm_runtime_get_sync(csi->dev);
+	ret = pm_runtime_resume_and_get(csi->dev);
 	if (ret < 0)
-		goto err_pm_put;
+		goto err_unlock;
 
 	ret = v4l2_pipeline_pm_get(&csi->vdev.entity);
 	if (ret)
@@ -227,6 +227,8 @@ static int sun4i_csi_open(struct file *file)
 
 err_pm_put:
 	pm_runtime_put(csi->dev);
+
+err_unlock:
 	mutex_unlock(&csi->lock);
 
 	return ret;
-- 
2.30.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel