From: hotran@apm.com (Hoan Tran)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/3] arm64: dts: xgene: Add DT node for APM X-Gene 2 CPU clocks
Date: Fri, 2 Sep 2016 17:40:55 -0700 [thread overview]
Message-ID: <1472863255-32337-4-git-send-email-hotran@apm.com> (raw)
In-Reply-To: <1472863255-32337-1-git-send-email-hotran@apm.com>
Add DT nodes to enable APM X-Gene 2 CPU clocks.
Signed-off-by: Hoan Tran <hotran@apm.com>
---
arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 56 ++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index 1425ed4..7b31895 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -26,6 +26,8 @@
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_0>;
+ #clock-cells = <1>;
+ clocks = <&pmd0clk 0>;
};
cpu at 001 {
device_type = "cpu";
@@ -34,6 +36,8 @@
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_0>;
+ #clock-cells = <1>;
+ clocks = <&pmd0clk 0>;
};
cpu at 100 {
device_type = "cpu";
@@ -42,6 +46,8 @@
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_1>;
+ #clock-cells = <1>;
+ clocks = <&pmd1clk 0>;
};
cpu at 101 {
device_type = "cpu";
@@ -50,6 +56,8 @@
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_1>;
+ #clock-cells = <1>;
+ clocks = <&pmd1clk 0>;
};
cpu at 200 {
device_type = "cpu";
@@ -58,6 +66,8 @@
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_2>;
+ #clock-cells = <1>;
+ clocks = <&pmd2clk 0>;
};
cpu at 201 {
device_type = "cpu";
@@ -66,6 +76,8 @@
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_2>;
+ #clock-cells = <1>;
+ clocks = <&pmd2clk 0>;
};
cpu at 300 {
device_type = "cpu";
@@ -74,6 +86,8 @@
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_3>;
+ #clock-cells = <1>;
+ clocks = <&pmd3clk 0>;
};
cpu at 301 {
device_type = "cpu";
@@ -82,6 +96,8 @@
enable-method = "spin-table";
cpu-release-addr = <0x1 0x0000fff8>;
next-level-cache = <&xgene_L2_3>;
+ #clock-cells = <1>;
+ clocks = <&pmd3clk 0>;
};
xgene_L2_0: l2-cache-0 {
compatible = "cache";
@@ -223,6 +239,46 @@
clock-output-names = "refclk";
};
+ pmdpll: pmdpll at 170000f0 {
+ compatible = "apm,xgene-pcppll-v2-clock";
+ #clock-cells = <1>;
+ clocks = <&refclk 0>;
+ reg = <0x0 0x170000f0 0x0 0x10>;
+ clock-output-names = "pmdpll";
+ };
+
+ pmd0clk: pmd0clk at 7e200200 {
+ compatible = "apm,xgene-pmd-clock";
+ #clock-cells = <1>;
+ clocks = <&pmdpll 0>;
+ reg = <0x0 0x7e200200 0x0 0x10>;
+ clock-output-names = "pmd0clk";
+ };
+
+ pmd1clk: pmd1clk at 7e200210 {
+ compatible = "apm,xgene-pmd-clock";
+ #clock-cells = <1>;
+ clocks = <&pmdpll 0>;
+ reg = <0x0 0x7e200210 0x0 0x10>;
+ clock-output-names = "pmd1clk";
+ };
+
+ pmd2clk: pmd2clk at 7e200220 {
+ compatible = "apm,xgene-pmd-clock";
+ #clock-cells = <1>;
+ clocks = <&pmdpll 0>;
+ reg = <0x0 0x7e200220 0x0 0x10>;
+ clock-output-names = "pmd2clk";
+ };
+
+ pmd3clk: pmd3clk at 7e200230 {
+ compatible = "apm,xgene-pmd-clock";
+ #clock-cells = <1>;
+ clocks = <&pmdpll 0>;
+ reg = <0x0 0x7e200230 0x0 0x10>;
+ clock-output-names = "pmd3clk";
+ };
+
socpll: socpll at 17000120 {
compatible = "apm,xgene-socpll-v2-clock";
#clock-cells = <1>;
--
1.9.1
prev parent reply other threads:[~2016-09-03 0:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-03 0:40 [PATCH v2 0/3] clk: xgene: Add PMD clock support Hoan Tran
2016-09-03 0:40 ` [PATCH v2 1/3] Documentation: dtb: xgene: Add PMD clock binding Hoan Tran
2016-09-12 15:37 ` Rob Herring
2016-09-12 18:23 ` Hoan Tran
2016-09-03 0:40 ` [PATCH v2 2/3] clk: xgene: Add PMD clock Hoan Tran
2016-09-03 0:40 ` Hoan Tran [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1472863255-32337-4-git-send-email-hotran@apm.com \
--to=hotran@apm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).