From mboxrd@z Thu Jan 1 00:00:00 1970 From: andy.gross@linaro.org (Andy Gross) Date: Fri, 2 Sep 2016 22:58:51 -0500 Subject: [GIT PULL] Qualcomm Device Tree Changes for v4.9 Message-ID: <1472875131-18077-1-git-send-email-andy.gross@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The following changes since commit 29b4817d4018df78086157ea3a55c1d9424a7cfc: Linux 4.8-rc1 (2016-08-07 18:18:00 -0700) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux.git tags/qcom-dts-for-4.9 for you to fetch changes up to 73bae19c3a3fde589b4508f3bfcc68d2f4b06f39: ARM: dts: msm8974: Move vreg_boost node from the honami to msm8974 (2016-09-02 13:48:22 -0500) ---------------------------------------------------------------- Qualcomm Device Tree Changes for v4.9 * Rework dr_mode on APQ8064 and Nexus7 * Add MSM8974 BLSP1 UART1 port * Add AP148 SATA mapping * Add support for LG Nexus 5 (Hammerhead) * Fixup MSM8660/MSM8064 SPMI/MPP IRQs * Add Nexus7 IMEM/reboot reason * Add Honami touchscreen support * Add TSENS support on MSM8974, APQ8064, and APQ8084 * Add APQ8060 Dragonboard PM8058 LEDs * Rework VPH PWR REG for MSM8974 ---------------------------------------------------------------- Bhushan Shah (6): ARM: dts: msm8974: Add nodes for blsp1_uart1 serial port ARM: dts: qcom: Add initial DTS for LG Nexus 5 Phone ARM: dts: msm8974-hammerhead: Add regulator nodes for hammerhead ARM: dts: msm8974-hammerhead: Introduce gpio-keys nodes ARM: dts: qcom: msm8974: Add fixed regulator node for vph-pwr-reg ARM: dts: msm8974: Move vreg_boost node from the honami to msm8974 Bjorn Andersson (1): ARM: dts: msm8974: honami: Add touchscreen John Stultz (3): device-tree: nexus7: Set phy mode to otg instead of host device-tree: aqp8064.dtsi: Remove usb phy dr_mode = "host" device-tree: nexus7: Add IMEM syscon and reboot reason support Linus Walleij (3): ARM: dts: MSM8064 remove flags from SPMI/MPP IRQs ARM: dts: MSM8660 remove flags from SPMI/MPP IRQs ARM: dts: add PM8058 LEDs to the APQ8060 Dragonboard Rajendra Nayak (3): arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes twp at codeaurora.org (1): ipq8064: dts: force AP148 SATA port mapping .../devicetree/bindings/clock/qcom,gcc.txt | 16 ++ arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 39 +++ arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 15 ++ arch/arm/boot/dts/qcom-apq8064.dtsi | 180 ++++++++++++-- arch/arm/boot/dts/qcom-apq8084.dtsi | 103 ++++++++ arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 1 + arch/arm/boot/dts/qcom-msm8660.dtsi | 75 ++++-- .../dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 262 +++++++++++++++++++++ .../boot/dts/qcom-msm8974-sony-xperia-honami.dts | 81 +++++-- arch/arm/boot/dts/qcom-msm8974.dtsi | 139 +++++++++++ arch/arm/boot/dts/qcom-pm8941.dtsi | 5 + 12 files changed, 857 insertions(+), 60 deletions(-) create mode 100644 arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts