From mboxrd@z Thu Jan 1 00:00:00 1970 From: tom.zanussi@linux.intel.com (Tom Zanussi) Date: Tue, 04 Apr 2017 11:59:10 -0500 Subject: [PATCH v2 0/5] minitty: a minimal TTY layer alternative for embedded systems In-Reply-To: References: <20170401222119.25106-1-nicolas.pitre@linaro.org> <87pogur0y9.fsf@firstfloor.org> <92fb1e4a-d6df-f55b-c0a1-9c1eb78e3943@longlandclan.id.au> Message-ID: <1491325150.7125.62.camel@tzanussi-mobl.amr.corp.intel.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On Tue, 2017-04-04 at 00:05 +0300, Andy Shevchenko wrote: > +Cc: Tom > > Summon Tom to the discussion. He tried once hard to shrink a Linux > kernel to something working in 1M+ RAM on x86. > Yes, in a previous project, I had been working toward getting a < 1M system to boot on Galileo hardware (which it did, but using more than that - the Galileo2 has 256MB, but it was the target hardware at the time, and I was hoping eventually to be able to boot out of the 512k on-chip SRAM). I was focused at that point mainly on the kernel static size, and using a combination of Josh Triplett's tinification tree, Andi Kleen's LTO and net-diet patches, and my own miscellaneous patches that I was planning on eventually upstreaming, I ended up with a system that I could boot to shell with a 455k text size: Memory: 235636K/245176K available (455K kernel code, 61K rwdata, 64K rodata, 132K init, 56K bss, 3056K reserved, 0K cma-reserved) virtual kernel memory layout: fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) vmalloc : 0xd05f0000 - 0xfffe3000 ( 761 MB) lowmem : 0xc0000000 - 0xcfdf0000 ( 253 MB) .init : 0xc1094000 - 0xc10b5000 ( 132 kB) .data : 0xc1071fac - 0xc1092760 ( 129 kB) .text : 0xc1000000 - 0xc1071fac ( 455 kB) That was without networking. Enabling networking added about 250k, and at that point I could ssh in and run a webserver, still less than 1M as far as kernel static size, which of course completely ignores the kernel dynamic size and userspace. My goal was to get rid of shell access and dropbear altogether and have all access be via webserver, which I did by using nostromo, mainly for convenience, until I could get some 'cgi' added to Alan Cox's ?Web (about 20k). Anyway, that work, as I left it a couple years ago, is here, in case anyone's interested (it's a yocto layer and yocto-based kernel containing many topic branches, but building it according to the directions in the README will yield a standard kernel and .config in the working directory and allow you to ignore all the yocto stuff): https://github.com/tzanussi/linux-yocto-micro-4.1 https://github.com/tzanussi/meta-microlinux/tree/jethro It's nice to see tinification work being done again -@the time I stopped working on it it seemed there was no desire from maintainers in general to merge anything that would create new options designed only for the purpose of tinification. In fact, as a kind of backup plan for that, I also played around with the idea of auto-generating a kernel that would contain only the functions that were demonstrated to be used by the (single-purpose) workload. It was similar to the idea of making every system call configurable and then including only the ones used by the workload, but taking it a step further and doing that for every function in the kernel, not just system calls. I had a script that would take the output of the function_hist histogram taken while exhaustively running the workload: https://lkml.org/lkml/2015/5/20/994 And with a kernel compiled using -ffunction-sections removing all functions that were never referenced. I never got a bootable kernel out of it, but mainly just because I ran out of time and had to move onto other things. I may dust it off and try again, just for fun... ;-) hth, Tom > Tom, sorry, I recall this a bit late, perhaps you might be interested > in reading discussion from the beginning. > > On Mon, Apr 3, 2017 at 9:14 PM, Geert Uytterhoeven wrote: > > On Mon, Apr 3, 2017 at 12:44 AM, Stuart Longland > > wrote: > >> On 03/04/17 07:41, Nicolas Pitre wrote: > >>>> No PTYs seems like a big limitation. This means no sshd? > >>> Again, my ultimate system target is in the sub-megabyte of RAM. I > >>> really doubt you'll be able to fit an SSH server in there even if PTYs > >>> were supported, unless sshd (or dropbear) can be made really tiny. > >>> Otherwise you most probably have sufficient resources to run the regular > >>> TTY code. > >> > >> Are we talking small microcontrollers here? The smallest machine in > >> terms of RAM I ever recall running Linux on was a 386SX/25 MHz with 4MB > >> RAM, and that had a MMU. > > > > Let's halve that. I once tried and ran Linux in 2 MiB, incl. X, twm, and xterm. > > Of course with swap enabled. And swapping like hell. > >