[PATCH] [media] imx: csi: retain current field order and colorimetry setting as default

[p.zabel@pengutronix.de (Philipp Zabel)]

On Thu, 2017-04-06 at 15:05 +0100, Russell King - ARM Linux wrote:
> On Thu, Apr 06, 2017 at 03:55:29PM +0200, Philipp Zabel wrote:
> > +
> > +	/* Retain current field setting as default */
> > +	if (sdformat->format.field == V4L2_FIELD_ANY)
> > +		sdformat->format.field = fmt->field;
> > +
> > +	/* Retain current colorspace setting as default */
> > +	if (sdformat->format.colorspace == V4L2_COLORSPACE_DEFAULT) {
> > +		sdformat->format.colorspace = fmt->colorspace;
> > +		if (sdformat->format.xfer_func == V4L2_XFER_FUNC_DEFAULT)
> > +			sdformat->format.xfer_func = fmt->xfer_func;
> > +		if (sdformat->format.ycbcr_enc == V4L2_YCBCR_ENC_DEFAULT)
> > +			sdformat->format.ycbcr_enc = fmt->ycbcr_enc;
> > +		if (sdformat->format.quantization == V4L2_QUANTIZATION_DEFAULT)
> > +			sdformat->format.quantization = fmt->quantization;
> > +	} else {
> > +		if (sdformat->format.xfer_func == V4L2_XFER_FUNC_DEFAULT) {
> > +			sdformat->format.xfer_func =
> > +				V4L2_MAP_XFER_FUNC_DEFAULT(
> > +						sdformat->format.colorspace);
> > +		}
> > +		if (sdformat->format.ycbcr_enc == V4L2_YCBCR_ENC_DEFAULT) {
> > +			sdformat->format.ycbcr_enc =
> > +				V4L2_MAP_YCBCR_ENC_DEFAULT(
> > +						sdformat->format.colorspace);
> > +		}
> > +		if (sdformat->format.quantization == V4L2_QUANTIZATION_DEFAULT) {
> > +			sdformat->format.quantization =
> > +				V4L2_MAP_QUANTIZATION_DEFAULT(
> > +						cc->cs != IPUV3_COLORSPACE_YUV,
> > +						sdformat->format.colorspace,
> > +						sdformat->format.ycbcr_enc);
> > +		}
> > +	}
> 
> Would it make sense for this to be a helper function?

Quite possible, the next subdev that has to set frame_interval on both
pads manually because its upstream source pad doesn't suport
frame_interval might want to do the same.

regards
Philipp