Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / Atom feed
From: tpiepho@impinj.com (Trent Piepho)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] PCI: imx: No-op imx6_pcie_reset_phy() on i.MX7D
Date: Tue, 20 Nov 2018 01:22:19 +0000
Message-ID: <1542676938.30311.581.camel@impinj.com> (raw)
In-Reply-To: <20181117181225.10737-3-andrew.smirnov@gmail.com>

On Sat, 2018-11-17 at 10:12 -0800, Andrey Smirnov wrote:
> PCIE PHY IP block on i.MX7D differs from the one used on i.MX6 family,
> so none of the code in current implementation of imx6_pcie_reset_phy()
> is applicable.

Tested on IMX7d, still appears to work.

Note that your patches will collide with Stefan Agner's patch, "PCI:
imx6: limit DBI register length", which was recently posted.

He changed the way the variants are handled.  That method would allow
some of the IMX7D || IMX8MQ checks to be re-written as

 imx6_pcie->drvdata->boolean_attribute

Where the attribute can be set in a table and be re-used in every place
it comes into play and updated for new devices in one spot, instead of
keeping piles of this version or that version or this other version
checks up to date.

  reply index

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-17 18:12 [PATCH 0/3] PCIE support for i.MX8MQ andrew.smirnov
2018-11-17 18:12 ` [PATCH 1/3] PCI: imx: No-op imx6_setup_phy_mpll() on i.MX7D andrew.smirnov
2018-11-17 18:12 ` [PATCH 2/3] PCI: imx: No-op imx6_pcie_reset_phy() " andrew.smirnov
2018-11-20  1:22   ` tpiepho [this message]
2018-11-26 18:32     ` andrew.smirnov
2018-11-17 18:12 ` [PATCH 3/3] PCI: imx: Add support for i.MX8MQ andrew.smirnov
2018-11-19  7:07   ` hongxing.zhu
2018-11-26 18:09     ` andrew.smirnov
2018-11-29 10:52       ` hongxing.zhu
2018-11-20 10:48   ` leonard.crestez
2018-11-26 18:24     ` andrew.smirnov
2018-11-27 10:06       ` l.stach
2018-11-27 10:46         ` leonard.crestez
2018-11-27 21:14           ` andrew.smirnov
2018-11-28 10:55             ` leonard.crestez
2018-11-29 11:15               ` l.stach
2018-11-29 11:12             ` l.stach
2018-11-27 10:16       ` leonard.crestez
2018-11-27 21:03         ` andrew.smirnov
2018-12-03 12:20 ` [PATCH 0/3] PCIE " Lorenzo Pieralisi
2018-12-07 11:37 ` Lorenzo Pieralisi

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1542676938.30311.581.camel@impinj.com \
    --to=tpiepho@impinj.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/0 linux-arm-kernel/git/0.git
	git clone --mirror https://lore.kernel.org/linux-arm-kernel/1 linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ https://lore.kernel.org/linux-arm-kernel \
		linux-arm-kernel@lists.infradead.org infradead-linux-arm-kernel@archiver.kernel.org
	public-inbox-index linux-arm-kernel


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.infradead.lists.linux-arm-kernel


AGPL code for this site: git clone https://public-inbox.org/ public-inbox