From: Andrew Murray <andrew.murray@arm.com>
To: Christoffer Dall <christoffer.dall@arm.com>,
Marc Zyngier <marc.zyngier@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
Mark Rutland <mark.rutland@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>,
kvmarm@lists.cs.columbia.edu,
linux-arm-kernel@lists.infradead.org,
Julien Thierry <julien.thierry@arm.com>
Subject: [PATCH v8 2/5] arm64: KVM: encapsulate kvm_cpu_context in kvm_host_data
Date: Wed, 12 Dec 2018 10:29:30 +0000 [thread overview]
Message-ID: <1544610573-28446-3-git-send-email-andrew.murray@arm.com> (raw)
In-Reply-To: <1544610573-28446-1-git-send-email-andrew.murray@arm.com>
The virt/arm core allocates a kvm_cpu_context_t percpu, at present this is
a typedef to kvm_cpu_context and is used to store host cpu context. The
kvm_cpu_context structure is also used elsewhere to hold vcpu context.
In order to use the percpu to hold additional future host information we
encapsulate kvm_cpu_context in a new structure and rename the typedef and
percpu to match.
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
---
arch/arm/include/asm/kvm_host.h | 8 ++++++--
arch/arm64/include/asm/kvm_asm.h | 4 ++--
arch/arm64/include/asm/kvm_host.h | 15 ++++++++++-----
arch/arm64/kernel/asm-offsets.c | 2 +-
virt/kvm/arm/arm.c | 10 ++++++----
5 files changed, 25 insertions(+), 14 deletions(-)
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index 79906ce..71645ba 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -145,7 +145,11 @@ struct kvm_cpu_context {
u32 cp15[NR_CP15_REGS];
};
-typedef struct kvm_cpu_context kvm_cpu_context_t;
+struct kvm_host_data {
+ struct kvm_cpu_context host_ctxt;
+};
+
+typedef struct kvm_host_data kvm_host_data_t;
struct kvm_vcpu_arch {
struct kvm_cpu_context ctxt;
@@ -163,7 +167,7 @@ struct kvm_vcpu_arch {
struct kvm_vcpu_fault_info fault;
/* Host FP context */
- kvm_cpu_context_t *host_cpu_context;
+ struct kvm_cpu_context *host_cpu_context;
/* VGIC state */
struct vgic_cpu vgic_cpu;
diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
index 102b5a5..6a9bfd4 100644
--- a/arch/arm64/include/asm/kvm_asm.h
+++ b/arch/arm64/include/asm/kvm_asm.h
@@ -102,12 +102,12 @@ extern u32 __init_stage2_translation(void);
.endm
.macro get_host_ctxt reg, tmp
- hyp_adr_this_cpu \reg, kvm_host_cpu_state, \tmp
+ hyp_adr_this_cpu \reg, kvm_host_data, \tmp
.endm
.macro get_vcpu_ptr vcpu, ctxt
get_host_ctxt \ctxt, \vcpu
- ldr \vcpu, [\ctxt, #HOST_CONTEXT_VCPU]
+ ldr \vcpu, [\ctxt, #HOST_DATA_VCPU]
kern_hyp_va \vcpu
.endm
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 1550192..1d3ca91 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -205,7 +205,12 @@ struct kvm_cpu_context {
struct kvm_vcpu *__hyp_running_vcpu;
};
-typedef struct kvm_cpu_context kvm_cpu_context_t;
+struct kvm_host_data {
+ struct kvm_cpu_context host_ctxt;
+ struct kvm_pmu_events pmu_events;
+};
+
+typedef struct kvm_host_data kvm_host_data_t;
struct kvm_vcpu_arch {
struct kvm_cpu_context ctxt;
@@ -241,7 +246,7 @@ struct kvm_vcpu_arch {
struct kvm_guest_debug_arch external_debug_state;
/* Pointer to host CPU context */
- kvm_cpu_context_t *host_cpu_context;
+ struct kvm_cpu_context *host_cpu_context;
struct thread_info *host_thread_info; /* hyp VA */
struct user_fpsimd_state *host_fpsimd_state; /* hyp VA */
@@ -387,7 +392,7 @@ void kvm_set_sei_esr(struct kvm_vcpu *vcpu, u64 syndrome);
struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr);
-DECLARE_PER_CPU(kvm_cpu_context_t, kvm_host_cpu_state);
+DECLARE_PER_CPU(kvm_host_data_t, kvm_host_data);
void __kvm_enable_ssbs(void);
@@ -400,8 +405,8 @@ static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr,
* kernel's mapping to the linear mapping, and store it in tpidr_el2
* so that we can use adr_l to access per-cpu variables in EL2.
*/
- u64 tpidr_el2 = ((u64)this_cpu_ptr(&kvm_host_cpu_state) -
- (u64)kvm_ksym_ref(kvm_host_cpu_state));
+ u64 tpidr_el2 = ((u64)this_cpu_ptr(&kvm_host_data) -
+ (u64)kvm_ksym_ref(kvm_host_data));
/*
* Call initialization code, and switch to the full blown HYP code.
diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
index 323aeb5..cb968ff 100644
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -142,7 +142,7 @@ int main(void)
DEFINE(CPU_FP_REGS, offsetof(struct kvm_regs, fp_regs));
DEFINE(VCPU_FPEXC32_EL2, offsetof(struct kvm_vcpu, arch.ctxt.sys_regs[FPEXC32_EL2]));
DEFINE(VCPU_HOST_CONTEXT, offsetof(struct kvm_vcpu, arch.host_cpu_context));
- DEFINE(HOST_CONTEXT_VCPU, offsetof(struct kvm_cpu_context, __hyp_running_vcpu));
+ DEFINE(HOST_DATA_VCPU, offsetof(struct kvm_host_data, host_ctxt.__hyp_running_vcpu));
#endif
#ifdef CONFIG_CPU_PM
DEFINE(CPU_SUSPEND_SZ, sizeof(struct cpu_suspend_ctx));
diff --git a/virt/kvm/arm/arm.c b/virt/kvm/arm/arm.c
index 150c8a6..c031ddf 100644
--- a/virt/kvm/arm/arm.c
+++ b/virt/kvm/arm/arm.c
@@ -56,7 +56,7 @@
__asm__(".arch_extension virt");
#endif
-DEFINE_PER_CPU(kvm_cpu_context_t, kvm_host_cpu_state);
+DEFINE_PER_CPU(kvm_host_data_t, kvm_host_data);
static DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page);
/* Per-CPU variable containing the currently running vcpu. */
@@ -361,8 +361,10 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
{
int *last_ran;
+ kvm_host_data_t *cpu_ctxt;
last_ran = this_cpu_ptr(vcpu->kvm->arch.last_vcpu_ran);
+ cpu_ctxt = this_cpu_ptr(&kvm_host_data);
/*
* We might get preempted before the vCPU actually runs, but
@@ -374,7 +376,7 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
}
vcpu->cpu = cpu;
- vcpu->arch.host_cpu_context = this_cpu_ptr(&kvm_host_cpu_state);
+ vcpu->arch.host_cpu_context = &cpu_ctxt->host_ctxt;
kvm_arm_set_running_vcpu(vcpu);
kvm_vgic_load(vcpu);
@@ -1547,9 +1549,9 @@ static int init_hyp_mode(void)
}
for_each_possible_cpu(cpu) {
- kvm_cpu_context_t *cpu_ctxt;
+ kvm_host_data_t *cpu_ctxt;
- cpu_ctxt = per_cpu_ptr(&kvm_host_cpu_state, cpu);
+ cpu_ctxt = per_cpu_ptr(&kvm_host_data, cpu);
err = create_hyp_mappings(cpu_ctxt, cpu_ctxt + 1, PAGE_HYP);
if (err) {
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2018-12-12 10:31 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-12 10:29 [PATCH v8 0/5] arm64: Support perf event modifiers :G and :H Andrew Murray
2018-12-12 10:29 ` [PATCH v8 1/5] arm64: arm_pmu: remove unnecessary isb instruction Andrew Murray
2018-12-12 10:29 ` Andrew Murray [this message]
2018-12-12 10:37 ` [PATCH v8 2/5] arm64: KVM: encapsulate kvm_cpu_context in kvm_host_data Suzuki K Poulose
2018-12-12 12:31 ` Andrew Murray
2018-12-18 11:40 ` Christoffer Dall
2018-12-12 10:29 ` [PATCH v8 3/5] arm64: KVM: add accessors to track guest/host only counters Andrew Murray
2018-12-12 10:56 ` Suzuki K Poulose
2018-12-12 10:29 ` [PATCH v8 4/5] arm64: arm_pmu: Add support for exclude_host/exclude_guest attributes Andrew Murray
2018-12-12 10:42 ` Suzuki K Poulose
2018-12-12 10:47 ` Julien Thierry
2018-12-12 10:51 ` Suzuki K Poulose
2018-12-12 10:55 ` Suzuki K Poulose
2018-12-12 14:38 ` Andrew Murray
2018-12-18 12:02 ` Christoffer Dall
2018-12-18 13:25 ` Andrew Murray
2018-12-18 14:38 ` Christoffer Dall
2018-12-18 16:27 ` Andrew Murray
2018-12-18 18:51 ` Christoffer Dall
2018-12-18 19:19 ` Andrew Jones
2019-01-04 15:32 ` Will Deacon
2019-01-08 10:18 ` Christoffer Dall
2019-01-08 11:25 ` Andrew Murray
2019-01-08 11:50 ` Marc Zyngier
2019-01-08 12:03 ` Christoffer Dall
2019-01-08 12:12 ` Marc Zyngier
2019-01-08 12:20 ` Christoffer Dall
2019-01-08 12:14 ` Christoffer Dall
2019-01-08 12:39 ` Andrew Murray
2018-12-12 10:29 ` [PATCH v8 5/5] arm64: KVM: Enable support for :G/:H perf event modifiers Andrew Murray
2018-12-12 10:53 ` Suzuki K Poulose
2018-12-12 14:46 ` Andrew Murray
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1544610573-28446-3-git-send-email-andrew.murray@arm.com \
--to=andrew.murray@arm.com \
--cc=catalin.marinas@arm.com \
--cc=christoffer.dall@arm.com \
--cc=julien.thierry@arm.com \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=suzuki.poulose@arm.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).