Linux-ARM-Kernel Archive on
 help / color / Atom feed
From: Sumit Garg <>
Cc:, Sumit Garg <>,,,,,,,,,,,
Subject: [PATCH v3 0/4] Introduce TEE bus driver framework
Date: Fri, 11 Jan 2019 17:17:27 +0530
Message-ID: <> (raw)

This series introduces a generic TEE bus driver concept for TEE based
kernel drivers which would like to communicate with TEE based devices/

Patch #1 adds TEE bus concept where devices/services are identified via
Universally Unique Identifier (UUID) and drivers register a table of
device UUIDs which they can support. This concept also allows for device
enumeration to be specific to corresponding TEE implementation like
OP-TEE etc.

Patch #2 adds supp_nowait flag for non-blocking requests arising via
TEE internal client interface.

Patch #3 adds TEE bus device enumeration support for OP-TEE. OP-TEE
provides a pseudo TA to enumerate TAs which can act as devices/services
for TEE bus.

Patch #4 adds OP-TEE based hwrng driver which act as TEE bus driver.
On ARM SoC's with TrustZone enabled, peripherals like entropy sources
might not be accessible to normal world (linux in this case) and rather
accessible to secure world (OP-TEE in this case) only. So this driver
aims to provides a generic interface to OP-TEE based random number
generator service.

Example case is Developerbox based on Socionext's Synquacer SoC [1]
which provides 7 thermal sensors accessible from secure world only which
could be used as entropy sources (thermal/measurement noise).


Changes in v3:

1. Fixed bus error path in Patch #1.
2. Reversed order of Patch #2 and #3.
3. Fixed miscellaneous syntax comments and memory leak.
4. Added comments in Patch #2 for supp_nowait flag.

Changes in v2:

Based on review comments, the scope of this series has increased as

1. Added TEE bus driver framework.
2. Added OP-TEE based device enumeration.
3. Register optee-rng driver as TEE bus driver.
4. Removed DT dependency for optee-rng device UUID.
5. Added supp_nowait flag.

Sumit Garg (4):
  tee: add bus driver framework for TEE based devices
  tee: add supp_nowait flag in tee_context struct
  tee: optee: add TEE bus device enumeration support
  hwrng: add OP-TEE based rng driver

 MAINTAINERS                        |   5 +
 drivers/char/hw_random/Kconfig     |  15 ++
 drivers/char/hw_random/Makefile    |   1 +
 drivers/char/hw_random/optee-rng.c | 272 +++++++++++++++++++++++++++++++++++++
 drivers/tee/optee/Makefile         |   1 +
 drivers/tee/optee/core.c           |   4 +
 drivers/tee/optee/device.c         | 153 +++++++++++++++++++++
 drivers/tee/optee/optee_private.h  |   3 +
 drivers/tee/optee/supp.c           |  10 +-
 drivers/tee/tee_core.c             |  56 +++++++-
 include/linux/tee_drv.h            |  42 ++++++
 11 files changed, 558 insertions(+), 4 deletions(-)
 create mode 100644 drivers/char/hw_random/optee-rng.c
 create mode 100644 drivers/tee/optee/device.c


linux-arm-kernel mailing list

             reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-11 11:47 Sumit Garg [this message]
2019-01-11 11:47 ` [PATCH v3 1/4] tee: add bus driver framework for TEE based devices Sumit Garg
2019-01-11 15:09   ` Bhupesh Sharma
2019-01-15 11:53     ` Sumit Garg
2019-01-11 11:47 ` [PATCH v3 2/4] tee: add supp_nowait flag in tee_context struct Sumit Garg
2019-01-11 11:47 ` [PATCH v3 3/4] tee: optee: add TEE bus device enumeration support Sumit Garg
2019-01-11 11:47 ` [PATCH v3 4/4] hwrng: add OP-TEE based rng driver Sumit Garg

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-ARM-Kernel Archive on

Archives are clonable:
	git clone --mirror linux-arm-kernel/git/0.git
	git clone --mirror linux-arm-kernel/git/1.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-arm-kernel linux-arm-kernel/ \
	public-inbox-index linux-arm-kernel

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox