Re: [PATCH v2 4/4] usb: musb: Add support for MediaTek musb controller

[Min Guo <min.guo@mediatek.com>]

On Wed, 2019-01-16 at 07:59 -0600, Bin Liu wrote:
> On Wed, Jan 16, 2019 at 05:39:02PM +0800, Min Guo wrote:
> > Hi Bin,
> > 
> > On Tue, 2019-01-15 at 14:38 -0600, Bin Liu wrote:
> > > Hi Min,
> > > 
> > > very close, thanks.
> > > Below I tried to explain a further cleanup in musb_clearb/w() and
> > > musb_get/set_toggle() implementation. Please let me know if it is not
> > > clear.
> > > 
> > > Basically, we don't need musb_default_clearb/w(), just assign the
> > > musb_io function pointers to musb_readb/w().
> > > 
> > > Then the mtk platform musb_clearb/w() calls musb_readb/w() and
> > > musb_writeb/w() to handle W1C.
> > 
> > Sorry to bother you again, I encounter a problem when prepare the patch.
> 
> no problem at all.

Thanks.

> > The define of musb_clearb/w and musb_readb/w are difference as follow,
> > and cannot be directly assigned:
> > u8/u16 (*readb/w)(const void __iomem *addr, unsigned offset)
> > void (*clearb/w)(void __iomem *addr, unsigned int offset)) 
> > 
> > if modify clearb/w as:
> > u8/u16 (*clearb/w)(const void __iomem *addr, unsigned int offset)) 
> > then musb_clear needs writeb/w the const addr.
> > Can I delete const in (*readb/w)?
> 
> yes, please create a separate patch for it, and for readl() as well,
> and stating it is for implementing clearing W1C registers.

Okay.

> Regards,
> -Bin.



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel