From: "Yannick Fertré" <yannick.fertre@st.com>
To: Yannick Fertre <yannick.fertre@st.com>,
Philippe Cornu <philippe.cornu@st.com>,
Benjamin Gaignard <benjamin.gaignard@st.com>,
Vincent Abriou <vincent.abriou@st.com>,
David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
<dri-devel@lists.freedesktop.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v4 2/2] drm/stm: dsi: add regulator support
Date: Tue, 14 May 2019 11:35:56 +0200 [thread overview]
Message-ID: <1557826556-10079-3-git-send-email-yannick.fertre@st.com> (raw)
In-Reply-To: <1557826556-10079-1-git-send-email-yannick.fertre@st.com>
Add support of regulator for the phy part of the DSI
controller.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
---
drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 60 ++++++++++++++++++++++++++++-------
1 file changed, 49 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
index 1bef73e..d8e4a14 100644
--- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
+++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
@@ -9,6 +9,7 @@
#include <linux/clk.h>
#include <linux/iopoll.h>
#include <linux/module.h>
+#include <linux/regulator/consumer.h>
#include <drm/drmP.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/bridge/dw_mipi_dsi.h>
@@ -76,6 +77,7 @@ struct dw_mipi_dsi_stm {
u32 hw_version;
int lane_min_kbps;
int lane_max_kbps;
+ struct regulator *vdd_supply;
};
static inline void dsi_write(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 val)
@@ -314,21 +316,36 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dsi->base = devm_ioremap_resource(dev, res);
if (IS_ERR(dsi->base)) {
- DRM_ERROR("Unable to get dsi registers\n");
- return PTR_ERR(dsi->base);
+ ret = PTR_ERR(dsi->base);
+ DRM_ERROR("Unable to get dsi registers %d\n", ret);
+ return ret;
+ }
+
+ dsi->vdd_supply = devm_regulator_get(dev, "phy-dsi");
+ if (IS_ERR(dsi->vdd_supply)) {
+ ret = PTR_ERR(dsi->vdd_supply);
+ if (ret != -EPROBE_DEFER)
+ DRM_ERROR("Failed to request regulator: %d\n", ret);
+ return ret;
+ }
+
+ ret = regulator_enable(dsi->vdd_supply);
+ if (ret) {
+ DRM_ERROR("Failed to enable regulator: %d\n", ret);
+ return ret;
}
dsi->pllref_clk = devm_clk_get(dev, "ref");
if (IS_ERR(dsi->pllref_clk)) {
ret = PTR_ERR(dsi->pllref_clk);
- dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
- return ret;
+ DRM_ERROR("Unable to get pll reference clock: %d\n", ret);
+ goto err_clk_get;
}
ret = clk_prepare_enable(dsi->pllref_clk);
if (ret) {
- dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
- return ret;
+ DRM_ERROR("Failed to enable pllref_clk: %d\n", ret);
+ goto err_clk_get;
}
dw_mipi_dsi_stm_plat_data.base = dsi->base;
@@ -338,20 +355,28 @@ static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
dsi->dsi = dw_mipi_dsi_probe(pdev, &dw_mipi_dsi_stm_plat_data);
if (IS_ERR(dsi->dsi)) {
- DRM_ERROR("Failed to initialize mipi dsi host\n");
- clk_disable_unprepare(dsi->pllref_clk);
- return PTR_ERR(dsi->dsi);
+ ret = PTR_ERR(dsi->dsi);
+ DRM_ERROR("Failed to initialize mipi dsi host: %d\n", ret);
+ goto err_dsi_probe;
}
return 0;
+
+err_dsi_probe:
+ clk_disable_unprepare(dsi->pllref_clk);
+err_clk_get:
+ regulator_disable(dsi->vdd_supply);
+
+ return ret;
}
static int dw_mipi_dsi_stm_remove(struct platform_device *pdev)
{
struct dw_mipi_dsi_stm *dsi = platform_get_drvdata(pdev);
- clk_disable_unprepare(dsi->pllref_clk);
dw_mipi_dsi_remove(dsi->dsi);
+ clk_disable_unprepare(dsi->pllref_clk);
+ regulator_disable(dsi->vdd_supply);
return 0;
}
@@ -363,6 +388,7 @@ static int __maybe_unused dw_mipi_dsi_stm_suspend(struct device *dev)
DRM_DEBUG_DRIVER("\n");
clk_disable_unprepare(dsi->pllref_clk);
+ regulator_disable(dsi->vdd_supply);
return 0;
}
@@ -370,10 +396,22 @@ static int __maybe_unused dw_mipi_dsi_stm_suspend(struct device *dev)
static int __maybe_unused dw_mipi_dsi_stm_resume(struct device *dev)
{
struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
+ int ret;
DRM_DEBUG_DRIVER("\n");
- clk_prepare_enable(dsi->pllref_clk);
+ ret = regulator_enable(dsi->vdd_supply);
+ if (ret) {
+ DRM_ERROR("Failed to enable regulator: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(dsi->pllref_clk);
+ if (ret) {
+ regulator_disable(dsi->vdd_supply);
+ DRM_ERROR("Failed to enable pllref_clk: %d\n", ret);
+ return ret;
+ }
return 0;
}
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-05-14 9:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-14 9:35 [PATCH v4 0/2] Add supply property for DSI controller Yannick Fertré
2019-05-14 9:35 ` [PATCH v4 1/2] dt-bindings: display: stm32: add supply property to " Yannick Fertré
2019-05-17 10:14 ` Benjamin Gaignard
2019-05-14 9:35 ` Yannick Fertré [this message]
2019-05-17 10:14 ` [PATCH v4 2/2] drm/stm: dsi: add regulator support Benjamin Gaignard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1557826556-10079-3-git-send-email-yannick.fertre@st.com \
--to=yannick.fertre@st.com \
--cc=airlied@linux.ie \
--cc=alexandre.torgue@st.com \
--cc=benjamin.gaignard@st.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=philippe.cornu@st.com \
--cc=vincent.abriou@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).