From: Anson Huang <anson.huang@nxp.com>
To: "catalin.marinas@arm.com" <catalin.marinas@arm.com>,
"will.deacon@arm.com" <will.deacon@arm.com>,
"shawnguo@kernel.org" <shawnguo@kernel.org>,
"s.hauer@pengutronix.de" <s.hauer@pengutronix.de>,
"kernel@pengutronix.de" <kernel@pengutronix.de>,
"festevam@gmail.com" <festevam@gmail.com>,
"maxime.ripard@bootlin.com" <maxime.ripard@bootlin.com>,
"agross@kernel.org" <agross@kernel.org>,
"olof@lixom.net" <olof@lixom.net>,
"horms+renesas@verge.net.au" <horms+renesas@verge.net.au>,
"jagan@amarulasolutions.com" <jagan@amarulasolutions.com>,
"bjorn.andersson@linaro.org" <bjorn.andersson@linaro.org>,
Leonard Crestez <leonard.crestez@nxp.com>,
"dinguyen@kernel.org" <dinguyen@kernel.org>,
"enric.balletbo@collabora.com" <enric.balletbo@collabora.com>,
Abel Vesa <abel.vesa@nxp.com>,
"l.stach@pengutronix.de" <l.stach@pengutronix.de>,
"robh@kernel.org" <robh@kernel.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: dl-linux-imx <linux-imx@nxp.com>
Subject: [PATCH V5 1/2] soc: imx: Add SCU SoC info driver support
Date: Wed, 22 May 2019 06:23:31 +0000 [thread overview]
Message-ID: <1558505898-722-1-git-send-email-Anson.Huang@nxp.com> (raw)
Add i.MX SCU SoC info driver to support i.MX8QXP SoC, introduce
driver dependency into Kconfig as CONFIG_IMX_SCU must be
selected to support i.MX SCU SoC driver, also need to use
platform driver model to make sure IMX_SCU driver is probed
before i.MX SCU SoC driver.
With this patch, SoC info can be read from sysfs:
i.mx8qxp-mek# cat /sys/devices/soc0/family
Freescale i.MX
i.mx8qxp-mek# cat /sys/devices/soc0/soc_id
0x2
i.mx8qxp-mek# cat /sys/devices/soc0/machine
Freescale i.MX8QXP MEK
i.mx8qxp-mek# cat /sys/devices/soc0/revision
1.1
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V4:
- using extern struct of_root instead of searching it again from DT;
- add of_node_put() after "fsl,imx-scu" is found.
---
drivers/soc/imx/Kconfig | 9 +++
drivers/soc/imx/Makefile | 1 +
drivers/soc/imx/soc-imx-scu.c | 155 ++++++++++++++++++++++++++++++++++++++++++
3 files changed, 165 insertions(+)
create mode 100644 drivers/soc/imx/soc-imx-scu.c
diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig
index d80f899..cbc1a41 100644
--- a/drivers/soc/imx/Kconfig
+++ b/drivers/soc/imx/Kconfig
@@ -7,4 +7,13 @@ config IMX_GPCV2_PM_DOMAINS
select PM_GENERIC_DOMAINS
default y if SOC_IMX7D
+config IMX_SCU_SOC
+ bool "i.MX System Controller Unit SoC info support"
+ depends on IMX_SCU
+ select SOC_BUS
+ help
+ If you say yes here you get support for the NXP i.MX System
+ Controller Unit SoC info module, it will provide the SoC info
+ like SoC family, ID and revision etc.
+
endmenu
diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
index d6b529e0..ddf343d 100644
--- a/drivers/soc/imx/Makefile
+++ b/drivers/soc/imx/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
obj-$(CONFIG_ARCH_MXC) += soc-imx8.o
+obj-$(CONFIG_IMX_SCU_SOC) += soc-imx-scu.o
diff --git a/drivers/soc/imx/soc-imx-scu.c b/drivers/soc/imx/soc-imx-scu.c
new file mode 100644
index 0000000..17deb4e
--- /dev/null
+++ b/drivers/soc/imx/soc-imx-scu.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP.
+ */
+
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <linux/firmware/imx/sci.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#define IMX_SCU_SOC_DRIVER_NAME "imx-scu-soc"
+
+static struct imx_sc_ipc *soc_ipc_handle;
+
+struct imx_sc_msg_misc_get_soc_id {
+ struct imx_sc_rpc_msg hdr;
+ union {
+ struct {
+ u32 control;
+ u16 resource;
+ } send;
+ struct {
+ u32 id;
+ u16 reserved;
+ } resp;
+ } data;
+} __packed;
+
+static u32 imx_scu_soc_id(void)
+{
+ struct imx_sc_msg_misc_get_soc_id msg;
+ struct imx_sc_rpc_msg *hdr = &msg.hdr;
+ int ret;
+
+ hdr->ver = IMX_SC_RPC_VERSION;
+ hdr->svc = IMX_SC_RPC_SVC_MISC;
+ hdr->func = IMX_SC_MISC_FUNC_GET_CONTROL;
+ hdr->size = 3;
+
+ msg.data.send.control = IMX_SC_C_ID;
+ msg.data.send.resource = IMX_SC_R_SYSTEM;
+
+ ret = imx_scu_call_rpc(soc_ipc_handle, &msg, true);
+ if (ret) {
+ pr_err("%s: get soc info failed, ret %d\n", __func__, ret);
+ /* return 0 means getting revision failed */
+ return 0;
+ }
+
+ return msg.data.resp.id;
+}
+
+static int imx_scu_soc_probe(struct platform_device *pdev)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+ u32 id, val;
+ int ret;
+
+ /* wait i.MX SCU driver ready */
+ ret = imx_scu_get_handle(&soc_ipc_handle);
+ if (ret)
+ return ret;
+
+ soc_dev_attr = devm_kzalloc(&pdev->dev, sizeof(*soc_dev_attr),
+ GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_dev_attr->family = "Freescale i.MX";
+
+ ret = of_property_read_string(of_root,
+ "model",
+ &soc_dev_attr->machine);
+ if (ret)
+ return ret;
+
+ id = imx_scu_soc_id();
+
+ /* format soc_id value passed from SCU firmware */
+ val = id & 0x1f;
+ soc_dev_attr->soc_id = val ? kasprintf(GFP_KERNEL, "0x%x", val)
+ : "unknown";
+ if (!soc_dev_attr->soc_id)
+ return -ENOMEM;
+
+ /* format revision value passed from SCU firmware */
+ val = (id >> 5) & 0xf;
+ val = (((val >> 2) + 1) << 4) | (val & 0x3);
+ soc_dev_attr->revision = val ? kasprintf(GFP_KERNEL,
+ "%d.%d",
+ (val >> 4) & 0xf,
+ val & 0xf) : "unknown";
+ if (!soc_dev_attr->revision) {
+ ret = -ENOMEM;
+ goto free_soc_id;
+ }
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ ret = PTR_ERR(soc_dev);
+ goto free_revision;
+ }
+
+ return 0;
+
+free_revision:
+ kfree(soc_dev_attr->revision);
+free_soc_id:
+ kfree(soc_dev_attr->soc_id);
+ return ret;
+}
+
+static struct platform_driver imx_scu_soc_driver = {
+ .driver = {
+ .name = IMX_SCU_SOC_DRIVER_NAME,
+ },
+ .probe = imx_scu_soc_probe,
+};
+
+static int __init imx_scu_soc_init(void)
+{
+ struct platform_device *imx_scu_soc_pdev;
+ struct device_node *np;
+ int ret;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx-scu");
+ if (!np)
+ return -ENODEV;
+
+ of_node_put(np);
+
+ ret = platform_driver_register(&imx_scu_soc_driver);
+ if (ret)
+ return ret;
+
+ imx_scu_soc_pdev =
+ platform_device_register_simple(IMX_SCU_SOC_DRIVER_NAME,
+ -1,
+ NULL,
+ 0);
+ if (IS_ERR(imx_scu_soc_pdev)) {
+ ret = PTR_ERR(imx_scu_soc_pdev);
+ goto unreg_platform_driver;
+ }
+
+ return 0;
+
+unreg_platform_driver:
+ platform_driver_unregister(&imx_scu_soc_driver);
+ return ret;
+}
+device_initcall(imx_scu_soc_init);
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-05-22 6:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-22 6:23 Anson Huang [this message]
2019-05-22 6:23 ` [PATCH V5 2/2] arm64: defconfig: Add i.MX SCU SoC info driver Anson Huang
2019-05-23 3:22 ` Aisheng Dong
2019-05-22 10:59 ` [PATCH V5 1/2] soc: imx: Add SCU SoC info driver support Abel Vesa
2019-05-23 3:22 ` Aisheng Dong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1558505898-722-1-git-send-email-Anson.Huang@nxp.com \
--to=anson.huang@nxp.com \
--cc=abel.vesa@nxp.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=dinguyen@kernel.org \
--cc=enric.balletbo@collabora.com \
--cc=festevam@gmail.com \
--cc=horms+renesas@verge.net.au \
--cc=jagan@amarulasolutions.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.ripard@bootlin.com \
--cc=olof@lixom.net \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).