From: <Eugen.Hristev@microchip.com>
To: <robh+dt@kernel.org>, <mark.rutland@arm.com>,
<Nicolas.Ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<Ludovic.Desroches@microchip.com>, <wsa@the-dreams.de>,
<linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Cc: Eugen.Hristev@microchip.com
Subject: [PATCH 3/5] i2c: at91: add support for digital filtering
Date: Thu, 20 Jun 2019 07:16:13 +0000 [thread overview]
Message-ID: <1561014676-22446-3-git-send-email-eugen.hristev@microchip.com> (raw)
In-Reply-To: <1561014676-22446-1-git-send-email-eugen.hristev@microchip.com>
From: Eugen Hristev <eugen.hristev@microchip.com>
Add new platform data support for digital filtering for i2c.
The sama5d4, sama5d2 and sam9x60 support this feature.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
drivers/i2c/busses/i2c-at91-core.c | 9 +++++++++
drivers/i2c/busses/i2c-at91-master.c | 6 ++++++
drivers/i2c/busses/i2c-at91.h | 4 ++++
3 files changed, 19 insertions(+)
diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c
index a663a7a..62610af 100644
--- a/drivers/i2c/busses/i2c-at91-core.c
+++ b/drivers/i2c/busses/i2c-at91-core.c
@@ -68,6 +68,7 @@ static struct at91_twi_pdata at91rm9200_config = {
.has_unre_flag = true,
.has_alt_cmd = false,
.has_hold_field = false,
+ .has_dig_filtr = false,
};
static struct at91_twi_pdata at91sam9261_config = {
@@ -76,6 +77,7 @@ static struct at91_twi_pdata at91sam9261_config = {
.has_unre_flag = false,
.has_alt_cmd = false,
.has_hold_field = false,
+ .has_dig_filtr = false,
};
static struct at91_twi_pdata at91sam9260_config = {
@@ -84,6 +86,7 @@ static struct at91_twi_pdata at91sam9260_config = {
.has_unre_flag = false,
.has_alt_cmd = false,
.has_hold_field = false,
+ .has_dig_filtr = false,
};
static struct at91_twi_pdata at91sam9g20_config = {
@@ -92,6 +95,7 @@ static struct at91_twi_pdata at91sam9g20_config = {
.has_unre_flag = false,
.has_alt_cmd = false,
.has_hold_field = false,
+ .has_dig_filtr = false,
};
static struct at91_twi_pdata at91sam9g10_config = {
@@ -100,6 +104,7 @@ static struct at91_twi_pdata at91sam9g10_config = {
.has_unre_flag = false,
.has_alt_cmd = false,
.has_hold_field = false,
+ .has_dig_filtr = false,
};
static const struct platform_device_id at91_twi_devtypes[] = {
@@ -130,6 +135,7 @@ static struct at91_twi_pdata at91sam9x5_config = {
.has_unre_flag = false,
.has_alt_cmd = false,
.has_hold_field = false,
+ .has_dig_filtr = false,
};
static struct at91_twi_pdata sama5d4_config = {
@@ -138,6 +144,7 @@ static struct at91_twi_pdata sama5d4_config = {
.has_unre_flag = false,
.has_alt_cmd = false,
.has_hold_field = true,
+ .has_dig_filtr = true,
};
static struct at91_twi_pdata sama5d2_config = {
@@ -146,6 +153,7 @@ static struct at91_twi_pdata sama5d2_config = {
.has_unre_flag = true,
.has_alt_cmd = true,
.has_hold_field = true,
+ .has_dig_filtr = true,
};
static struct at91_twi_pdata sam9x60_config = {
@@ -154,6 +162,7 @@ static struct at91_twi_pdata sam9x60_config = {
.has_unre_flag = true,
.has_alt_cmd = true,
.has_hold_field = true,
+ .has_dig_filtr = true,
};
static const struct of_device_id atmel_twi_dt_ids[] = {
diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
index e87232f..366e90f 100644
--- a/drivers/i2c/busses/i2c-at91-master.c
+++ b/drivers/i2c/busses/i2c-at91-master.c
@@ -31,12 +31,18 @@
void at91_init_twi_bus_master(struct at91_twi_dev *dev)
{
+ struct at91_twi_pdata *pdata = dev->pdata;
+
/* FIFO should be enabled immediately after the software reset */
if (dev->fifo_size)
at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_FIFOEN);
at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_MSEN);
at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SVDIS);
at91_twi_write(dev, AT91_TWI_CWGR, dev->twi_cwgr_reg);
+
+ /* enable digital filter */
+ if (pdata->has_dig_filtr)
+ at91_twi_write(dev, AT91_TWI_FILTR, AT91_TWI_FILTR_FILT);
}
/*
diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
index 499b506..3e80811 100644
--- a/drivers/i2c/busses/i2c-at91.h
+++ b/drivers/i2c/busses/i2c-at91.h
@@ -84,6 +84,9 @@
#define AT91_TWI_ACR_DATAL(len) ((len) & 0xff)
#define AT91_TWI_ACR_DIR BIT(8)
+#define AT91_TWI_FILTR 0x0044
+#define AT91_TWI_FILTR_FILT BIT(0)
+
#define AT91_TWI_FMR 0x0050 /* FIFO Mode Register */
#define AT91_TWI_FMR_TXRDYM(mode) (((mode) & 0x3) << 0)
#define AT91_TWI_FMR_TXRDYM_MASK (0x3 << 0)
@@ -108,6 +111,7 @@ struct at91_twi_pdata {
bool has_unre_flag;
bool has_alt_cmd;
bool has_hold_field;
+ bool has_dig_filtr;
struct at_dma_slave dma_slave;
};
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-06-20 7:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-20 7:16 [PATCH 1/5] dt-bindings: i2c: at91: add new compatible Eugen.Hristev
2019-06-20 7:16 ` [PATCH 2/5] i2c: at91: add new platform support for sam9x60 Eugen.Hristev
2019-06-20 7:16 ` Eugen.Hristev [this message]
2019-06-20 8:27 ` [PATCH 3/5] i2c: at91: add support for digital filtering Alexandre Belloni
2019-06-20 7:16 ` [PATCH 4/5] i2c: at91: add support for advanced " Eugen.Hristev
2019-06-20 7:16 ` [PATCH 5/5] i2c: at91: add support for analog filtering Eugen.Hristev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1561014676-22446-3-git-send-email-eugen.hristev@microchip.com \
--to=eugen.hristev@microchip.com \
--cc=Ludovic.Desroches@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).