linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Dong Aisheng <aisheng.dong@nxp.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Dong Aisheng <aisheng.dong@nxp.com>,
	devicetree@vger.kernel.org, dongas86@gmail.com,
	catalin.marinas@arm.com, will.deacon@arm.com, robh+dt@kernel.org,
	linux-imx@nxp.com, kernel@pengutronix.de, fabio.estevam@nxp.com,
	Mark Rutland <mark.rutland@arm.com>,
	shawnguo@kernel.org
Subject: [PATCH v2 05/15] arm64: dts: imx8: add conn lpcg clocks
Date: Tue, 16 Jul 2019 23:14:39 +0800	[thread overview]
Message-ID: <1563290089-11085-6-git-send-email-aisheng.dong@nxp.com> (raw)
In-Reply-To: <1563290089-11085-1-git-send-email-aisheng.dong@nxp.com>

Add conn lpcg clocks

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
ChangeLog:
v1->v2:
 * Use old SCU clock binding temporarily to avoid build warning due to SCU
   clock cell will be changed to 2.
 * add power domain propertyv1->v2:
---
 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 96 ++++++++++++++++++++++++-
 1 file changed, 93 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index e5f6041..1ae49c1 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -4,15 +4,33 @@
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
+#include <dt-bindings/firmware/imx/rsrc.h>
+
 conn_subsys: bus@5b000000 {
 	compatible = "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0x5b000000 0x0 0x5b000000 0x1000000>;
 
-	conn_lpcg: clock-controller@5b200000 {
-		reg = <0x5b200000 0xb0000>;
-		#clock-cells = <1>;
+	conn_axi_clk: clock-conn-axi {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <333333333>;
+		clock-output-names = "conn_axi_clk";
+	};
+
+	conn_ahb_clk: clock-conn-ahb {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <166666666>;
+		clock-output-names = "conn_ahb_clk";
+	};
+
+	conn_ipg_clk: clock-conn-ipg {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <83333333>;
+		clock-output-names = "conn_ipg_clk";
 	};
 
 	usdhc1: mmc@5b010000 {
@@ -92,4 +110,76 @@ conn_subsys: bus@5b000000 {
 		power-domains = <&pd IMX_SC_R_ENET_1>;
 		status = "disabled";
 	};
+
+	/* LPCG clocks */
+	conn_lpcg: clock-controller-legacy@5b200000 {
+		reg = <0x5b200000 0xb0000>;
+		#clock-cells = <1>;
+	};
+
+	sdhc0_lpcg: clock-controller@5b200000 {
+		reg = <0x5b200000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_CONN_SDHC0_CLK>,
+			 <&conn_ipg_clk>, <&conn_axi_clk>;
+		bit-offset = <0 16 20>;
+		clock-output-names = "sdhc0_lpcg_per_clk",
+				     "sdhc0_lpcg_ipg_clk",
+				     "sdhc0_lpcg_ahb_clk";
+		power-domains = <&pd IMX_SC_R_SDHC_0>;
+	};
+
+	sdhc1_lpcg: clock-controller@5b210000 {
+		reg = <0x5b210000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_CONN_SDHC1_CLK>,
+			 <&conn_ipg_clk>, <&conn_axi_clk>;
+		bit-offset = <0 16 20>;
+		clock-output-names = "sdhc1_lpcg_per_clk",
+				     "sdhc1_lpcg_ipg_clk",
+				     "sdhc1_lpcg_ahb_clk";
+		power-domains = <&pd IMX_SC_R_SDHC_1>;
+	};
+
+	sdhc2_lpcg: clock-controller@5b220000 {
+		reg = <0x5b220000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_CONN_SDHC2_CLK>,
+			 <&conn_ipg_clk>, <&conn_axi_clk>;
+		bit-offset = <0 16 20>;
+		clock-output-names = "sdhc2_lpcg_per_clk",
+				     "sdhc2_lpcg_ipg_clk",
+				     "sdhc2_lpcg_ahb_clk";
+		power-domains = <&pd IMX_SC_R_SDHC_2>;
+	};
+
+	enet0_lpcg: clock-controller@5b230000 {
+		reg = <0x5b230000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_CONN_ENET0_ROOT_CLK>,
+			 <&clk IMX_CONN_ENET0_ROOT_CLK>,
+			 <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>;
+		bit-offset = <0 4 8 16 20>;
+		clock-output-names = "enet0_ipg_root_clk",
+				     "enet0_tx_clk",
+				     "enet0_ahb_clk",
+				     "enet0_ipg_clk",
+				     "enet0_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_ENET_0>;
+	};
+
+	enet1_lpcg: clock-controller@5b240000 {
+		reg = <0x5b240000 0x10000>;
+		#clock-cells = <1>;
+		clocks = <&clk IMX_CONN_ENET1_ROOT_CLK>,
+			 <&clk IMX_CONN_ENET1_ROOT_CLK>,
+			 <&conn_axi_clk>, <&conn_ipg_clk>, <&conn_ipg_clk>;
+		bit-offset = <0 4 8 16 20>;
+		clock-output-names = "enet1_ipg_root_clk",
+				     "enet1_tx_clk",
+				     "enet1_ahb_clk",
+				     "enet1_ipg_clk",
+				     "enet1_ipg_s_clk";
+		power-domains = <&pd IMX_SC_R_ENET_1>;
+	};
 };
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-07-16 15:38 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-16 15:14 [PATCH v2 00/15] arm64: dts: imx8: architecture improvement and adding imx8qm support Dong Aisheng
2019-07-16 15:14 ` [PATCH v2 01/15] arm64: dts: imx8qxp: add fallback compatible string for scu pd Dong Aisheng
2019-08-29 10:20   ` Oliver Graute
2019-09-09 14:27     ` Dong Aisheng
2019-07-16 15:14 ` [PATCH v2 02/15] arm64: dts: imx8qxp: move scu pd node before scu clock node Dong Aisheng
2019-07-16 19:26   ` Fabio Estevam
2019-07-17  8:14     ` Dong Aisheng
2019-07-16 15:14 ` [PATCH v2 03/15] arm64: dts: imx8qxp: orginize dts in subsystems Dong Aisheng
2019-07-16 15:14 ` [PATCH v2 04/15] arm64: dts: imx8: add lsio lpcg clocks Dong Aisheng
2019-07-16 15:14 ` Dong Aisheng [this message]
2019-07-16 15:14 ` [PATCH v2 06/15] arm64: dts: imx8: add adma " Dong Aisheng
2019-07-16 19:28   ` Fabio Estevam
2019-07-17  8:22     ` Dong Aisheng
2019-07-16 15:14 ` [PATCH v2 07/15] arm64: dts: imx8: switch to two cell scu clock binding Dong Aisheng
2019-07-16 19:28   ` Fabio Estevam
2019-07-17  8:23     ` Dong Aisheng
2019-07-16 15:14 ` [PATCH v2 08/15] arm64: dts: imx8: switch to new lpcg " Dong Aisheng
2019-07-16 15:14 ` [PATCH v2 09/15] arm64: dts: imx8qm: add lsio ss support Dong Aisheng
2019-07-16 19:30   ` Fabio Estevam
2019-07-17  8:24     ` Dong Aisheng
2019-07-16 15:14 ` [PATCH v2 10/15] arm64: dts: imx8qm: add conn " Dong Aisheng
2019-07-16 19:31   ` Fabio Estevam
2019-07-17  8:26     ` Dong Aisheng
2019-08-07 12:04   ` Oliver Graute
2019-07-16 15:14 ` [PATCH v2 11/15] arm64: dts: imx8: split adma ss into dma and audio ss Dong Aisheng
2019-07-16 15:14 ` [PATCH v2 12/15] arm64: dts: imx8qm: add dma ss support Dong Aisheng
2019-07-16 15:14 ` [PATCH v2 13/15] arm64: dts: imx: add imx8qm common dts file Dong Aisheng
2019-07-16 19:33   ` Fabio Estevam
2019-07-17  8:28     ` Dong Aisheng
2019-07-16 15:14 ` [PATCH v2 14/15] arm64: dts: imx: add imx8qm mek support Dong Aisheng
2019-07-16 15:14 ` [PATCH v2 15/15] arm64: defconfig: " Dong Aisheng
2019-07-16 19:24   ` Fabio Estevam
2019-07-17  8:16     ` Aisheng Dong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1563290089-11085-6-git-send-email-aisheng.dong@nxp.com \
    --to=aisheng.dong@nxp.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dongas86@gmail.com \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).