From: Yoshihiro Kaneko <ykaneko0929@gmail.com>
To: linux-renesas-soc@vger.kernel.org
Cc: Magnus Damm <magnus.damm@gmail.com>,
Simon Horman <horms@verge.net.au>,
Geert Uytterhoeven <geert@linux-m68k.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64: dts: renesas: r8a7795-salvator-xs: sort nodes
Date: Tue, 23 Jul 2019 02:23:08 +0900 [thread overview]
Message-ID: <1563816188-17922-1-git-send-email-ykaneko0929@gmail.com> (raw)
Sort nodes.
If node address is present
* Sort by node address, grouping all nodes with the same compat string
and sorting the group alphabetically.
Else
* Sort alphabetically
This should not have any run-time effect.
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
---
This patch is based on the devel branch of Simon Horman's renesas tree.
.../arm64/boot/dts/renesas/r8a7795-salvator-xs.dts | 82 +++++++++++-----------
1 file changed, 41 insertions(+), 41 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
index 42101fc..36667c8 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
@@ -57,17 +57,6 @@
status = "okay";
};
-&hsusb3 {
- dr_mode = "otg";
- status = "okay";
-};
-
-&sound_card {
- dais = <&rsnd_port0 /* ak4613 */
- &rsnd_port1 /* HDMI0 */
- &rsnd_port2>; /* HDMI1 */
-};
-
&hdmi0 {
status = "okay";
@@ -114,6 +103,11 @@
remote-endpoint = <&rcar_dw_hdmi1_out>;
};
+&hsusb3 {
+ dr_mode = "otg";
+ status = "okay";
+};
+
&ohci2 {
status = "okay";
};
@@ -123,36 +117,6 @@
status = "okay";
};
-&rcar_sound {
- ports {
- /* rsnd_port0 is on salvator-common */
- rsnd_port1: port@1 {
- reg = <1>;
- rsnd_endpoint1: endpoint {
- remote-endpoint = <&dw_hdmi0_snd_in>;
-
- dai-format = "i2s";
- bitclock-master = <&rsnd_endpoint1>;
- frame-master = <&rsnd_endpoint1>;
-
- playback = <&ssi2>;
- };
- };
- rsnd_port2: port@2 {
- reg = <2>;
- rsnd_endpoint2: endpoint {
- remote-endpoint = <&dw_hdmi1_snd_in>;
-
- dai-format = "i2s";
- bitclock-master = <&rsnd_endpoint2>;
- frame-master = <&rsnd_endpoint2>;
-
- playback = <&ssi3>;
- };
- };
- };
-};
-
&pca9654 {
pcie_sata_switch {
gpio-hog;
@@ -186,11 +150,47 @@
};
};
+&rcar_sound {
+ ports {
+ /* rsnd_port0 is on salvator-common */
+ rsnd_port1: port@1 {
+ reg = <1>;
+ rsnd_endpoint1: endpoint {
+ remote-endpoint = <&dw_hdmi0_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint1>;
+ frame-master = <&rsnd_endpoint1>;
+
+ playback = <&ssi2>;
+ };
+ };
+ rsnd_port2: port@2 {
+ reg = <2>;
+ rsnd_endpoint2: endpoint {
+ remote-endpoint = <&dw_hdmi1_snd_in>;
+
+ dai-format = "i2s";
+ bitclock-master = <&rsnd_endpoint2>;
+ frame-master = <&rsnd_endpoint2>;
+
+ playback = <&ssi3>;
+ };
+ };
+ };
+};
+
/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
&sata {
status = "okay";
};
+&sound_card {
+ dais = <&rsnd_port0 /* ak4613 */
+ &rsnd_port1 /* HDMI0 */
+ &rsnd_port2>; /* HDMI1 */
+};
+
&usb2_phy2 {
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
--
1.9.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-07-22 17:23 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-22 17:23 Yoshihiro Kaneko [this message]
2019-07-25 6:21 ` [PATCH] arm64: dts: renesas: r8a7795-salvator-xs: sort nodes Simon Horman
2019-07-30 9:16 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1563816188-17922-1-git-send-email-ykaneko0929@gmail.com \
--to=ykaneko0929@gmail.com \
--cc=geert@linux-m68k.org \
--cc=horms@verge.net.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).