[PATCH v6 0/4] DCMI bridge support

[Hugues Fruchet <hugues.fruchet@st.com>]

This patch serie allows to connect non-parallel camera sensor to
DCMI thanks to a bridge connected in between such as STMIPID02 [1].

Media controller support is introduced first, then support of
several sub-devices within pipeline with dynamic linking
between them.
In order to keep backward compatibility with applications
relying on V4L2 interface only, format set on video node
is propagated to all sub-devices connected to camera interface.

[1] https://www.spinics.net/lists/devicetree/msg278002.html

===========
= history =
===========
version 6:
  - As per Sakari remark: add a FIXME explaining that this
    version only supports subdevices which expose RGB & YUV
    "parallel form" mbus code (_2X8)
  - Add some trace around subdev_call(s_fmt) error & format
    changes to debug subdev which only expose serial mbus code
  - Conform to "<name>":<pad index> when tracing subdev infos

version 5:
  - Remove remaining Change-Id
  - Add Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>

version 4:
  - Also drop subdev nodes registry as suggested by Hans:
    https://www.spinics.net/lists/arm-kernel/msg743375.html

version 3:
  - Drop media device registry to not expose media controller
    interface to userspace as per Laurent' suggestion:
    https://www.spinics.net/lists/linux-media/msg153417.html
  - Prefer "source" instead of "sensor" and keep it in 
    dcmi_graph_entity struct, move asd as first member
    of struct as per Sakari' suggestion:
    https://www.spinics.net/lists/linux-media/msg153119.html
  - Drop dcmi_graph_deinit() as per Sakari' suggestion:
    https://www.spinics.net/lists/linux-media/msg153417.html

version 2:
  - Fix bus_info not consistent between media and V4L:
    https://www.spinics.net/lists/arm-kernel/msg717676.html
  - Propagation of format set on video node to the sub-devices
    chain connected on camera interface

version 1:
  - Initial submission


Hugues Fruchet (4):
  media: stm32-dcmi: improve sensor subdev naming
  media: stm32-dcmi: trace the supported fourcc/mbus_code
  media: stm32-dcmi: add media controller support
  media: stm32-dcmi: add support of several sub-devices

 drivers/media/platform/Kconfig            |   2 +-
 drivers/media/platform/stm32/stm32-dcmi.c | 317 +++++++++++++++++++++++++-----
 2 files changed, 267 insertions(+), 52 deletions(-)

-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel